Both hex format and the traditional "escape" format are automatically
handled on input. The output format is selected by the new GUC variable
bytea_output.
As committed, bytea_output defaults to HEX, which is an *incompatible
change*. We will keep it this way for awhile for testing purposes, but
should consider whether to switch to the more backwards-compatible
default of ESCAPE before 8.5 is released.
Peter Eisentraut
for the case that the semijoin was implemented within either input by
unique-ifying its RHS before we test to see if it appears to match the current
join situation. The previous coding would select semijoin logic in situations
where we'd already unique-ified the RHS and joined it to some unrelated
relation(s), and then came to join it to the semijoin's LHS. That still gave
the right answer as far as the semijoin itself was concerned, but would lead
to incorrectly examining only an arbitrary one of the matchable rows from the
unrelated relation(s). The cause of this thinko was incorrect unification of
the pre-8.4 logic for IN joins and OUTER joins --- the comparable case for
outer joins can be handled after making the match test, but that's because
there is nothing like the unique-ification escape hatch for outer joins.
Per bug #4934 from Benjamin Reed.
reorder a semijoin into or out of the righthand side of another semijoin,
but actually it doesn't work to reorder it into or out of the righthand
side of a left or antijoin, either. Per bug #4906 from Mathieu Fenniak.
This was sloppy thinking on my part. This identity does work:
( A left join B on (Pab) ) semijoin C on (Pac)
==
( A semijoin C on (Pac) ) left join B on (Pab)
but I failed to see that that doesn't mean this does:
( A left join B on (Pab) ) semijoin C on (Pbc)
!=
A left join ( B semijoin C on (Pbc) ) on (Pab)
foo <> false, along with its previous duties of simplifying foo = true
and foo = false. (All of these are equivalent to just foo or NOT foo
as the case may be.) It's not clear how often this is really useful;
but it costs almost nothing to do, and it seems some people think we
should be smart about such cases. Per recent bug report.
sequence, even when the input "tour" doesn't lead directly to such a sequence.
The stack logic that was added in 2004 only supported cases where relations
that had to be joined to each other (due to join order restrictions) were
adjacent in the tour. However, relying on a random search to figure that out
is tremendously inefficient in large join problems, and could even fail
completely (leading to "failed to make a valid plan" errors) if
random_init_pool ran out of patience. It seems better to make the
tour-to-plan transformation a little bit fuzzier so that every tour can form
a legal plan, even though this means that apparently different tours will
sometimes yield the same plan.
In the same vein, get rid of the logic that knew that tours (a,b,c,d,...)
are the same as tours (b,a,c,d,...), and therefore insisted the latter
are invalid. The chance of generating two tours that differ only in
this way isn't that high, and throwing out 50% of possible tours to
avoid such duplication seems more likely to waste valuable genetic-
refinement generations than to do anything useful.
This leaves us with no cases in which geqo_eval will deem a tour invalid,
so get rid of assorted kluges that tried to deal with such cases, in
particular the undocumented assumption that DBL_MAX is an impossible
plan cost.
This is all per testing of Robert Haas' lets-remove-the-collapse-limits
patch. That idea has crashed and burned, at least for now, but we still
got something useful out of it.
It's possible we should back-patch this change, since the "failed to make a
valid plan" error can happen in existing releases; but I'd rather not until
it has gotten more testing.
by unique-ifying the RHS and then inner-joining to some other relation,
that is not grounds for violating the RHS of some other outer join.
Noticed while regression-testing new GEQO code, which will blindly follow
any path that join_is_legal says is legal, and then complain later if that
leads to a dead end.
I'm not certain that this can result in any visible failure in 8.4: the
mistake may always be masked by the fact that subsequent attempts to join
the rest of the RHS of the other join will fail. But I'm not certain it
can't, either, and it's definitely not operating as intended. So back-patch.
The added regression test depends on the new no-failures-allowed logic
that I'm about to commit in GEQO, so no point back-patching that.
that the sanity checking I added to create_mergejoin_plan() in 8.3 was a
few bricks shy of a load: the mergeclauses could reference pathkeys in a
noncanonical order such as x,y,x, not only cases like x,x,y which is all
that the code had allowed for. The odd cases only turn up when using
redundant clauses in an outer join condition, which is why no one had
noticed before.
random number seed each time. This is how it used to work years ago, but
we got rid of the seed reset because it was resetting the main random()
sequence and thus having undesirable effects on the rest of the system.
To fix, establish a private random number state for each execution of
geqo(), and initialize the state using the new GUC variable geqo_seed.
People who want to experiment with different random searches can do so
by changing geqo_seed, but you'll always get the same plan for the same
value of geqo_seed (if holding all other planner inputs constant, of course).
The new state is kept in PlannerInfo by adding a "void *" field reserved
for use by join_search hooks. Most of the rather bulky code changes in
this commit are just arranging to pass PlannerInfo around to all the GEQO
functions (many of which formerly didn't receive it).
Andres Freund, with some editorialization by Tom
This alters various incidental uses of C++ key words to use other similar
identifiers, so that a C++ compiler won't choke outright. You still
(probably) need extern "C" { }; around the inclusion of backend headers.
based on a patch by Kurt Harriman <harriman@acm.org>
Also add a script cpluspluscheck to check for C++ compatibility in the
future. As of right now, this passes without error for me.
RelOptInfo targetlist. It used to be that the only possibility other than
a Var was a RowExpr representing a whole-row child Var, but as of 8.4's
expanded ability to flatten appendrel members, we can get arbitrary expressions
in there. Use the expression's type info and get_typavgwidth() to produce
an at-least-marginally-sane result. Note that get_typavgwidth()'s fallback
estimate (32 bytes) is the same as what was here before, so there will be
no behavioral change for RowExprs. Noted while looking at recent gripe
about constant quals pushed down to FunctionScan appendrel members ...
not only were we failing to recognize the constant qual, we were getting
the width estimate wrong :-(
substituting a child rel's output expressions into the appendrel's restriction
clauses yields a pseudoconstant restriction. We might be able to skip scanning
that child rel entirely (if we get constant FALSE), or generate a one-time
filter. 8.3 more or less accidentally generated plans that weren't completely
stupid in these cases, but that was only because an extra recursive level of
subquery_planner() always occurred and allowed const-simplification to happen.
8.4's ability to pull up appendrel members with non-Var outputs exposes the
fact that we need to work harder here. Per gripe from Sergey Burladyan.
the "cteParam" as a proxy for the possibility that the underlying CTE plan
depends on outer-level variables or Params, but that doesn't work very well
because it sometimes causes calling subqueries to be treated as SubPlans when
they could be InitPlans. This is inefficient and also causes the outright
failure exhibited in bug #4902. Instead, leave the cteParam out of it and
copy the underlying CTE plan's extParams directly. Per bug #4902 from
Marko Tiikkaja.
ability to lock relations as they scan pg_inherits, and to ignore any
relations that have disappeared by the time we get lock on them. This
makes uses of these functions safe against concurrent DROP operations
on child tables: we will effectively ignore any just-dropped child,
rather than possibly throwing an error as in recent bug report from
Thomas Johansson (and similar past complaints). The behavior should
not change otherwise, since the code was acquiring those same locks
anyway, just a little bit later.
An exception is LockTableCommand(), which is still behaving unsafely;
but that seems to require some more discussion before we change it.
find_inheritance_children() and find_all_inheritors(). I got annoyed that
these are buried inside the planner but mostly used elsewhere. So, create
a new file catalog/pg_inherits.c and put them there, along with a couple
of other functions that search pg_inherits.
The code that modifies pg_inherits is (still) in tablecmds.c --- it's
kind of entangled with unrelated code that modifies pg_depend and other
stuff, so pulling it out seemed like a bigger change than I wanted to make
right now. But this file provides a natural home for it if anyone ever
gets around to that.
This commit just moves code around; it doesn't change anything, except
I succumbed to the temptation to make a couple of trivial optimizations
in typeInheritsFrom().
of AND/OR clause branches that predtest.c would attempt to deal with. As
noted in bug #4721, that change disabled proof attempts for sizes of problems
that people are actually expecting it to work for. The original complaint
it was trying to solve was O(N^2) behavior for long IN-lists, so let's try
applying the limit to just ScalarArrayOpExprs rather than everything.
Another case of "foolish consistency" I fear.
Back-patch to 8.2, same as the previous patch was.
predicate_refuted_by: if either top-level input is a single-element list,
reduce it to its lone member before proceeding. This avoids
a useless level of AND-recursion within the recursive proof routines.
It's worth doing because, for example, if the clause is a 100-element
list and the predicate is a 1-element list then we'd otherwise strip
the predicate's list structure 100 times as we iterate through the clause.
It's only needed at top level because there won't be any trivial ANDs below
that --- this situation is an artifact of the decision to represent even
single-item conditions as Lists in the "implicit AND" format, and that format
is only used at the top level of any predicate or restriction condition.
joins a bit better, ie, understand the differing cost functions for matched
and unmatched outer tuples. There is more that could be done in cost_hashjoin
but this already helps a great deal. Per discussions with Robert Haas.
restrictions specified for semijoins in optimizer/README, to wit that
you can't reassociate outer joins into or out of the RHS of a semijoin.
Per report from Heikki.
can be pushed to the top of the join tree, we update both the relids and
qualscope variables to keep them in sync. This prevents a possible later
failure of an Assert clause, and affects nothing else since qualscope isn't
used later except for that Assert. At the moment the Assert shouldn't be
reachable when we've pushed the qual up; but this is cheap insurance, and
it's more sensible anyway in terms of the overall logic of the routine.
Per analysis of a bug report from Stefan Huehner.
I'm not back-patching this since it's just future-proofing; but if anyone
gets tempted to change check_outerjoin_delay again in the back branches,
this might be needed.
PlaceHolderVar nodes in join quals appearing in or below the lowest
outer join that could null the subquery being pulled up. This improves
the planner's ability to recognize constant join quals, and probably
helps with detection of common sort keys (equivalence classes) as well.
aggregate function. By definition, such a sub-SELECT cannot reference any
variables of query levels between itself and the aggregate's semantic level
(else the aggregate would've been assigned to that lower level instead).
So the correct, most efficient implementation is to treat the sub-SELECT as
being a sub-select of that outer query level, not the level the aggregate
syntactically appears in. Not doing so also confuses the heck out of our
parameter-passing logic, as illustrated in bug report from Daniel Grace.
Fortunately, we were already copying the whole Aggref expression up to the
outer query level, so all that's needed is to delay SS_process_sublinks
processing of the sub-SELECT until control returns to the outer level.
This has been broken since we introduced spec-compliant treatment of
outer aggregates in 7.4; so patch all the way back.
Stefan Kaltenbrunner. The most reasonable behavior (at least for the near
term) seems to be to ignore the PlaceHolderVar and examine its argument
instead. In support of this, change the API of pull_var_clause() to allow
callers to request recursion into PlaceHolderVars. Currently
estimate_num_groups() is the only customer for that behavior, but where
there's one there may be others.
constants through full joins, as in
select * from tenk1 a full join tenk1 b using (unique1)
where unique1 = 42;
which should generate a fairly cheap plan where we apply the constraint
unique1 = 42 in each relation scan. This had been broken by my patch of
2008-06-27, which is now reverted in favor of a more invasive but hopefully
less incorrect approach. That patch was meant to prevent incorrect extraction
of OR'd indexclauses from OR conditions above an outer join. To do that
correctly we need more information than the outerjoin_delay flag can provide,
so add a nullable_relids field to RestrictInfo that records exactly which
relations are nulled by outer joins that are underneath a particular qual
clause. A side benefit is that we can make the test in create_or_index_quals
more specific: it is now smart enough to extract an OR'd indexclause into the
outer side of an outer join, even though it must not do so in the inner side.
The old coding couldn't distinguish these cases so it could not do either.
are individually labeled, rather than just grouped under an "InitPlan"
or "SubPlan" heading. This in turn makes it possible for decompilation of
a subplan reference to usefully identify which subplan it's referencing.
I also made InitPlans identify which parameter symbol(s) they compute,
so that references to those parameters elsewhere in the plan tree can
be connected to the initplan that will be executed. Per a gripe from
Robert Haas about EXPLAIN output of a WITH query being inadequate,
plus some longstanding pet peeves of my own.
temp relations; this is no more expensive than before, now that we have
pg_class.relistemp. Insert tests into bufmgr.c to prevent attempting
to fetch pages from nonlocal temp relations. This provides a low-level
defense against bugs-of-omission allowing temp pages to be loaded into shared
buffers, as in the contrib/pgstattuple problem reported by Stuart Bishop.
While at it, tweak a bunch of places to use new relcache tests (instead of
expensive probes into pg_namespace) to detect local or nonlocal temp tables.
"physical tlist" optimization on the outer relation (ie, force a projection
step to occur in its scan). This avoids storing useless column values when
the outer relation's tuples are written to temporary batch files.
Modified version of a patch by Michael Henderson and Ramon Lawrence.
distribution, by creating a special fast path for the (first few) most common
values of the outer relation. Tuples having hashvalues matching the MCVs
are effectively forced to be in the first batch, so that we never write
them out to the batch temp files.
Bryce Cutt and Ramon Lawrence, with some editorialization by me.
exact-match pattern (no wildcard) can be index-optimized in some cases where a
prefix-match pattern cannot; specifically, since the required index clause is
simple equality, it works for regular text/varchar indexes even when the
locale is not C. I'm not sure how often this case really comes up, but since
it requires hardly any additional work to handle it, we might as well get it
right. Motivated by a discussion on the JDBC list.
for consistency with the (relatively) recent addition of typmod to SubLink.
An example of why it's a good idea is to be seen in the recent "failed to
locate grouping columns" bug, which wouldn't have happened if a SubPlan
exposed the same typmod info as the SubLink it was derived from.
This could be back-patched, since it doesn't affect any on-disk data format,
but for the moment it doesn't seem necessary to do so.
by the planning process. This prevents the "failed to locate grouping columns"
error recently reported by Dickson Guedes. That happens because planning
replaces SubLinks by SubPlans in the subquery's targetlist, and exprTypmod()
is smarter about the former than the latter, causing the apparent type of
the subquery's output columns to change. This seems to be a deficiency we
should fix in exprTypmod(), but that will be a much more invasive patch
with possible side-effects elsewhere, so I'll do that only in HEAD.
Back-patch to 8.3. Arguably the lack of a copying step is broken/dangerous
all the way back, but in the absence of known problems I'll refrain from
making the older branches pay the extra cost. (The reason this particular
symptom didn't appear before is that exprTypmod() wasn't smart about SubLinks
either, until 8.3.)
amgettuple or only implement amgetbitmap, instead of the former assumption
that every AM supports both APIs. Extracted with minor editorialization
from Teodor's fast-GIN-insert patch; whatever becomes of that, this seems
like a simple and reasonable generalization of the index AM interface spec.
attribute numbering. Also, a parent whole-row reference should not require
select privilege on child columns that aren't inherited from the parent.
Problem diagnosed by KaiGai Kohei, though this isn't exactly his patch.
input lists before we grovel through the lists. This doesn't save much,
but testing shows that the case of both inputs NIL is common enough that
it saves something. And this is used enough to be a hotspot.
the ON clause of an outer join. Doing so is semantically correct but results
in de-optimizing queries that were structured to take advantage of the sublink
style of execution, as seen in recent complaint from Kevin Grittner. Since
the user can get the other behavior by reorganizing his query, having the
flattening happen automatically is just a convenience, and that doesn't
justify breaking existing applications. Eventually it would be nice to
re-enable this, but that seems to require a significantly different approach
to outer joins in the executor.
to be syntactically part of a semijoin clause. For example given
WHERE EXISTS(SELECT ... WHERE upper.var = lower.var AND some-condition)
where some-condition is just a restriction on the lower relation, we can
use unique-ification on lower.var after having applied some-condition within
the scan on lower.
making pull_up_sublinks() construct a full-blown JoinExpr tree representation
of IN/EXISTS SubLinks that it is able to convert to semi or anti joins.
This makes pull_up_sublinks() a shade more complex, but the gain in semantic
clarity is worth it. I still have more to do in this area to address the
previously-discussed problems, but this commit in itself fixes at least one
bug in HEAD, as shown by added regression test case.
IS NULL condition is rendered redundant by detection of an antijoin.
If we know that a join is an antijoin, then *any* Var coming out of its
righthand side must be NULL, not only the joining column(s). Also,
it's still gonna be null after being passed up through higher joins,
whether they're outer joins or not. I was misled by a faulty analogy
to reduce_outer_joins() in the original coding. But consider
select * from a left join b on a.x = b.y where b.y is null and b.z is null;
The first IS NULL condition justifies deciding that the join is an antijoin
(if the = is strict) and then the second one is just plain redundant.
unique for a particular query, if the index predicate is satisfied. This
requires a bit of reordering of operations so that we check the predicates
before doing any selectivity estimates, but shouldn't really cause any
noticeable slowdown. Per a comment from Michal Politowski.
keys when considering a semi or anti join. This requires estimating the
selectivity of the merge qual as though it were a regular inner join condition.
To allow caching both that and the real outer-join-aware selectivity, split
RestrictInfo.this_selec into two fields.
This fixes one of the problems reported by Kevin Grittner.
the cheapest-total inner path as a new candidate while truncating the
sort key list, if it already matched the full sort key list. This is
too much of a corner case to be worth back-patching, since it's unusual
for the cheapest total path to be sorted, and anyway no real harm is
done (except in JOIN_SEMI/ANTI cases where cost_mergejoin is a bit
broken at the moment). But it wasn't behaving as intended, so fix it.
Noted while examining a test case from Kevin Grittner. This error doesn't
explain his issue, but it does explain why "set enable_seqscan = off"
seemed to reproduce it for me.
that are set up for execution with ExecPrepareExpr rather than going through
the full planner process. By introducing an explicit notion of "expression
planning", this patch also lays a bit of groundwork for maybe someday
allowing sub-selects in standalone expressions.
the default. This setting enables constraint exclusion checks only for
appendrel members (ie, inheritance children and UNION ALL arms), which are
the cases in which constraint exclusion is most likely to be useful. Avoiding
the overhead for simple queries that are unlikely to benefit should bring
the cost down to the point where this is a reasonable default setting.
Per today's discussion.
