pg_dumpall acquires a new -F/--format option, with the same meanings as
pg_dump. The default is p, meaning plain text. For any other value, a
directory is created containing two files, globals.data and map.dat. The
first contains SQL for restoring the global data, and the second
contains a map from oids to database names. It will also contain a
subdirectory called databases, inside which it will create archives in
the specified format, named using the database oids.
In these casess the -f argument is required.
If pg_restore encounters a directory containing globals.dat, and no
toc.dat, it restores the global settings and then restores each
database.
pg_restore acquires two new options: -g/--globals-only which suppresses
restoration of any databases, and --exclude-database which inhibits
restoration of particualr database(s) in the same way the same option
works in pg_dumpall.
Author: Mahendra Singh Thalor <mahi6run@gmail.com>
Co-authored-by: Andrew Dunstan <andrew@dunslane.net>
Reviewed-by: jian he <jian.universality@gmail.com>
Reviewed-by: Srinath Reddy <srinath2133@gmail.com>
Reviewed-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/cb103623-8ee6-4ba5-a2c9-f32e3a4933fa@dunslane.net
This new option instructs pg_recvlogical to create the logical
replication slot with the failover option enabled. It can be used in
conjunction with the --create-slot option.
Author: Hayato Kuroda <kuroda.hayato@fujitsu.com>
Reviewed-by: Michael Banck <mbanck@gmx.net>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Discussion: https://postgr.es/m/OSCPR01MB14966C54097FC83AF19F3516BF5AC2@OSCPR01MB14966.jpnprd01.prod.outlook.com
Teach nbtree multi-column index scans to opportunistically skip over
irrelevant sections of the index given a query with no "=" conditions on
one or more prefix index columns. When nbtree is passed input scan keys
derived from a predicate "WHERE b = 5", new nbtree preprocessing steps
output "WHERE a = ANY(<every possible 'a' value>) AND b = 5" scan keys.
That is, preprocessing generates a "skip array" (and an output scan key)
for the omitted prefix column "a", which makes it safe to mark the scan
key on "b" as required to continue the scan. The scan is therefore able
to repeatedly reposition itself by applying both the "a" and "b" keys.
A skip array has "elements" that are generated procedurally and on
demand, but otherwise works just like a regular ScalarArrayOp array.
Preprocessing can freely add a skip array before or after any input
ScalarArrayOp arrays. Index scans with a skip array decide when and
where to reposition the scan using the same approach as any other scan
with array keys. This design builds on the design for array advancement
and primitive scan scheduling added to Postgres 17 by commit 5bf748b8.
Testing has shown that skip scans of an index with a low cardinality
skipped prefix column can be multiple orders of magnitude faster than an
equivalent full index scan (or sequential scan). In general, the
cardinality of the scan's skipped column(s) limits the number of leaf
pages that can be skipped over.
The core B-Tree operator classes on most discrete types generate their
array elements with the help of their own custom skip support routine.
This infrastructure gives nbtree a way to generate the next required
array element by incrementing (or decrementing) the current array value.
It can reduce the number of index descents in cases where the next
possible indexable value frequently turns out to be the next value
stored in the index. Opclasses that lack a skip support routine fall
back on having nbtree "increment" (or "decrement") a skip array's
current element by setting the NEXT (or PRIOR) scan key flag, without
directly changing the scan key's sk_argument. These sentinel values
behave just like any other value from an array -- though they can never
locate equal index tuples (they can only locate the next group of index
tuples containing the next set of non-sentinel values that the scan's
arrays need to advance to).
A skip array's range is constrained by "contradictory" inequality keys.
For example, a skip array on "x" will only generate the values 1 and 2
given a qual such as "WHERE x BETWEEN 1 AND 2 AND y = 66". Such a skip
array qual usually has near-identical performance characteristics to a
comparable SAOP qual "WHERE x = ANY('{1, 2}') AND y = 66". However,
improved performance isn't guaranteed. Much depends on physical index
characteristics.
B-Tree preprocessing is optimistic about skipping working out: it
applies static, generic rules when determining where to generate skip
arrays, which assumes that the runtime overhead of maintaining skip
arrays will pay for itself -- or lead to only a modest performance loss.
As things stand, these assumptions are much too optimistic: skip array
maintenance will lead to unacceptable regressions with unsympathetic
queries (queries whose scan can't skip over many irrelevant leaf pages).
An upcoming commit will address the problems in this area by enhancing
_bt_readpage's approach to saving cycles on scan key evaluation, making
it work in a way that directly considers the needs of = array keys
(particularly = skip array keys).
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Masahiro Ikeda <masahiro.ikeda@nttdata.com>
Reviewed-By: Heikki Linnakangas <heikki.linnakangas@iki.fi>
Reviewed-By: Matthias van de Meent <boekewurm+postgres@gmail.com>
Reviewed-By: Tomas Vondra <tomas@vondra.me>
Reviewed-By: Aleksander Alekseev <aleksander@timescale.com>
Reviewed-By: Alena Rybakina <a.rybakina@postgrespro.ru>
Discussion: https://postgr.es/m/CAH2-Wzmn1YsLzOGgjAQZdn1STSG_y8qP__vggTaPAYXJP+G4bw@mail.gmail.com
Previously, "COPY table TO" command worked only with plain tables and
did not support materialized views, even when they were populated and
had physical storage. To copy rows from materialized views,
"COPY (query) TO" command had to be used, instead.
This commit extends "COPY table TO" to support populated materialized
views directly, improving usability and performance, as "COPY table TO"
is generally faster than "COPY (query) TO". Note that copying from
unpopulated materialized views will still result in an error.
Author: jian he <jian.universality@gmail.com>
Reviewed-by: Kirill Reshke <reshkekirill@gmail.com>
Reviewed-by: David G. Johnston <david.g.johnston@gmail.com>
Reviewed-by: Vignesh C <vignesh21@gmail.com>
Reviewed-by: Fujii Masao <masao.fujii@gmail.com>
Discussion: https://postgr.es/m/CACJufxHVxnyRYy67hiPePNCPwVBMzhTQ6FaL9_Te5On9udG=yg@mail.gmail.com
Previously, ALTER DEFAULT PRIVILEGES did not support large objects.
This meant that to grant privileges to users other than the owner,
permissions had to be manually assigned each time a large object
was created, which was inconvenient.
This commit extends ALTER DEFAULT PRIVILEGES to allow defining default
access privileges for large objects. With this change, specified privileges
will automatically apply to newly created large objects, making privilege
management more efficient.
As a side effect, this commit introduces the new keyword OBJECTS
since it's used in the syntax of ALTER DEFAULT PRIVILEGES.
Original patch by Haruka Takatsuka, with some fixes and tests by Yugo Nagata,
and rebased by Laurenz Albe.
Author: Takatsuka Haruka <harukat@sraoss.co.jp>
Co-authored-by: Yugo Nagata <nagata@sraoss.co.jp>
Co-authored-by: Laurenz Albe <laurenz.albe@cybertec.at>
Reviewed-by: Masao Fujii <masao.fujii@gmail.com>
Discussion: https://postgr.es/m/20240424115242.236b499b2bed5b7a27f7a418@sraoss.co.jp
The documentation for the special value "system" for sslrootcert could
be misinterpreted to mean the default operating system CA store, which
it may be, but it's defined to be the default CA store of the SSL lib
used.
Backpatch down to v16 where support for the system value was added.
Author: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: George MacKerron <george@mackerron.co.uk>
Discussion: https://postgr.es/m/B3CBBAA3-6EA3-4AB7-8619-4BBFAB93DDB4@yesql.se
Backpatch-through: 16
Previously, invalidated logical and physical replication slots could
be copied using the pg_copy_logical_replication_slot and
pg_copy_physical_replication_slot functions. Replication slots that
were invalidated for reasons other than WAL removal retained their
restart_lsn. This meant that a new slot copied from an invalidated
slot could have a restart_lsn pointing to a WAL segment that might
have already been removed.
This commit restricts the copying of invalidated replication slots.
Backpatch to v16, where slots could retain their restart_lsn when
invalidated for reasons other than WAL removal.
For v15 and earlier, this check is not required since slots can only
be invalidated due to WAL removal, and existing checks already handle
this issue.
Author: Shlok Kyal <shlok.kyal.oss@gmail.com>
Reviewed-by: vignesh C <vignesh21@gmail.com>
Reviewed-by: Zhijie Hou <houzj.fnst@fujitsu.com>
Reviewed-by: Peter Smith <smithpb2250@gmail.com>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Discussion: https://postgr.es/m/CANhcyEU65aH0VYnLiu%3DOhNNxhnhNhwcXBeT-jvRe1OiJTo_Ayg%40mail.gmail.com
Backpatch-through: 16
This adds a new connection parameter which instructs libpq to
write out keymaterial clientside into a file in order to make
connection debugging with Wireshark and similar tools possible.
The file format used is the standardized NSS format.
Author: Abhishek Chanda <abhishek.becs@gmail.com>
Co-authored-by: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Jacob Champion <jacob.champion@enterprisedb.com>
Discussion: https://postgr.es/m/CAKiP-K85C8uQbzXKWf5wHQPkuygGUGcufke713iHmYWOe9q2dA@mail.gmail.com
This enables sortsupport in the btree_gist extension for faster builds
of gist indexes.
Sorted gist index build strategy is the new default now. Regression
tests are unchanged (except for one small change in the 'enum' test to
add coverage for enum values added later) and are using the sorted
build strategy instead.
One version of this was committed a long time ago already, in commit
9f984ba6d2, but it was quickly reverted because of buildfarm
failures. The failures were presumably caused by some small bugs, but
we never got around to debug and commit it again. This patch was
written from scratch, implementing the same idea, with some fragments
and ideas from the original patch.
Author: Bernd Helmle <mailings@oopsware.de>
Author: Andrey Borodin <x4mmm@yandex-team.ru>
Discussion: https://www.postgresql.org/message-id/64d324ce2a6d535d3f0f3baeeea7b25beff82ce4.camel@oopsware.de
The issue is that the transactions prepared before two-phase decoding is
enabled can fail to replicate to the subscriber after being committed on a
promoted standby following a failover. This is because the two_phase_at
field of a slot, which tracks the LSN from which two-phase decoding
starts, is not synchronized to standby servers. Without two_phase_at, the
logical decoding might incorrectly identify prepared transaction as
already replicated to the subscriber after promotion of standby server,
causing them to be skipped.
To address the issue on HEAD, the two_phase_at field of the slot is
exposed by the pg_replication_slots view and allows the slot
synchronization to copy this value to the corresponding synced slot on the
standby server.
This bug is likely to occur if the user toggles the two_phase option to
true after initial slot creation. Given that altering the two_phase option
of a replication slot is not allowed in PostgreSQL 17, this bug is less
likely to occur. We can't change the view/function definition in
backbranch so we can't push the same fix but we are brainstorming an
appropriate solution for PG17.
Author: Zhijie Hou <houzj.fnst@fujitsu.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Discussion: https://postgr.es/m/TYAPR01MB5724CC7C288535BBCEEE65DA94A72@TYAPR01MB5724.jpnprd01.prod.outlook.com
In the historical implementation of SQL functions (if they don't get
inlined), we built plans for all the contained queries at first call
within an outer query, and then re-used those plans for the duration
of the outer query, and then forgot everything. This was not ideal,
not least because the plans could not be customized to specific values
of the function's parameters. Our plancache infrastructure seems
mature enough to be used here. That will solve both the problem with
not being able to build custom plans and the problem with not being
able to share work across successive outer queries.
Aside from those performance concerns, this change fixes a
longstanding bugaboo with SQL functions: you could not write DDL that
would affect later statements in the same function. That's mostly
still true with new-style SQL functions, since the results of parse
analysis are baked into the stored query trees (and protected by
dependency records). But for old-style SQL functions, it will now
work much as it does with PL/pgSQL functions, because we delay parse
analysis and planning of each query until we're ready to run it.
Some edge cases that require replanning are now handled better too;
see for example the new rowsecurity test, where we now detect an RLS
context change that was previously missed.
One other edge-case change that might be worthy of a release note
is that we now insist that a SQL function's result be generated
by the physically-last query within it. Previously, if the last
original query was deleted by a DO INSTEAD NOTHING rule, we'd be
willing to take the result from the preceding query instead.
This behavior was undocumented except in source-code comments,
and it seems hard to believe that anyone's relying on it.
Along the way to this feature, we needed a few infrastructure changes:
* The plancache can now take either a raw parse tree or an
analyzed-but-not-rewritten Query as the starting point for a
CachedPlanSource. If given a Query, it is caller's responsibility
that nothing will happen to invalidate that form of the query.
We use this for new-style SQL functions, where what's in pg_proc is
serialized Query(s) and we trust the dependency mechanism to disallow
DDL that would break those.
* The plancache now offers a way to invoke a post-rewrite callback
to examine/modify the rewritten parse tree when it is rebuilding
the parse trees after a cache invalidation. We need this because
SQL functions sometimes adjust the parse tree to make its output
exactly match the declared result type; if the plan gets rebuilt,
that has to be re-done.
* There is a new backend module utils/cache/funccache.c that
abstracts the idea of caching data about a specific function
usage (a particular function and set of input data types).
The code in it is moved almost verbatim from PL/pgSQL, which
has done that for a long time. We use that logic now for
SQL-language functions too, and maybe other PLs will have use
for it in the future.
Author: Alexander Pyhalov <a.pyhalov@postgrespro.ru>
Co-authored-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Pavel Stehule <pavel.stehule@gmail.com>
Discussion: https://postgr.es/m/8216639.NyiUUSuA9g@aivenlaptop
Move the discussion on protocol versions and version negotiation to a
new "Protocol versions" section. Add a table listing all the different
protocol versions, starting from the obsolete protocol version 2, and
the PostgreSQL versions that support each.
Discussion: https://www.postgresql.org/message-id/69f53970-1d55-4165-9151-6fb524e36af9@iki.fi
Currently, the cancel request key is a 32-bit token, which isn't very
much entropy. If you want to cancel another session's query, you can
brute-force it. In most environments, an unauthorized cancellation of
a query isn't very serious, but it nevertheless would be nice to have
more protection from it. Hence make the key longer, to make it harder
to guess.
The longer cancellation keys are generated when using the new protocol
version 3.2. For connections using version 3.0, short 4-bytes keys are
still used.
The new longer key length is not hardcoded in the protocol anymore,
the client is expected to deal with variable length keys, up to 256
bytes. This flexibility allows e.g. a connection pooler to add more
information to the cancel key, which might be useful for finding the
connection.
Reviewed-by: Jelte Fennema-Nio <postgres@jeltef.nl>
Reviewed-by: Robert Haas <robertmhaas@gmail.com> (earlier versions)
Discussion: https://www.postgresql.org/message-id/508d0505-8b7a-4864-a681-e7e5edfe32aa@iki.fi
All supported version of the PostgreSQL server send the
NegotiateProtocolVersion message when an unsupported minor protocol
version is requested by a client. But many other applications that
implement the PostgreSQL protocol (connection poolers, or other
databases) do not, and the same is true for PostgreSQL server versions
older than 9.3. Connecting to such other applications thus fails if a
client requests a protocol version different than 3.0.
This patch adds a max_protocol_version connection option to libpq that
specifies the protocol version that libpq should request from the
server. Currently only 3.0 is supported, but that will change in a
future commit that bumps the protocol version. Even after that version
bump the default will likely stay 3.0 for the time being. Once more of
the ecosystem supports the NegotiateProtocolVersion message we might
want to change the default to the latest minor version.
This also adds the similar min_protocol_version connection option, to
allow the client to specify that connecting should fail if a lower
protocol version is attempted by the server. This can be used to
ensure that certain protocol features are used, which can be
particularly useful if those features impact security.
Author: Jelte Fennema-Nio <postgres@jeltef.nl>
Reviewed-by: Robert Haas <robertmhaas@gmail.com> (earlier versions)
Discussion: https://www.postgresql.org/message-id/CAGECzQTfc_O%2BHXqAo5_-xG4r3EFVsTefUeQzSvhEyyLDba-O9w@mail.gmail.com
Discussion: https://www.postgresql.org/message-id/CAGECzQRbAGqJnnJJxTdKewTsNOovUt4bsx3NFfofz3m2j-t7tA@mail.gmail.com
The reasoning for why all the message formats are parseable without
the explicit message length field is anachronistic; the real reason is
that protocol version 2 did not have a message length field. There's
nothing wrong with relying on the message length, like we do in the
CopyData messags, even though it often still makes sense to have
length fields for individual parts in messages.
Discussion: https://www.postgresql.org/message-id/02a4eed2-98f0-4796-9d4f-12128ff44fe0@iki.fi
This expands the NOT ENFORCED constraint flag, previously only
supported for CHECK constraints (commit ca87c415e2f), to foreign key
constraints.
Normally, when a foreign key constraint is created on a table, action
and check triggers are added to maintain data integrity. With this
patch, if a constraint is marked as NOT ENFORCED, integrity checks are
no longer required, making these triggers unnecessary. Consequently,
when creating a NOT ENFORCED foreign key constraint, triggers will not
be created, and the constraint will be marked as NOT VALID.
Similarly, if an existing foreign key constraint is changed to NOT
ENFORCED, the associated triggers will be dropped, and the constraint
will also be marked as NOT VALID. Conversely, if a NOT ENFORCED
foreign key constraint is changed to ENFORCED, the necessary triggers
will be created, and the will be changed to VALID by performing
necessary validation.
Since not-enforced foreign key constraints have no triggers, the
shortcut used for example in psql and pg_dump to skip looking for
foreign keys if the relation is known not to have triggers no longer
applies. (It already didn't work for partitioned tables.)
Author: Amul Sul <sulamul@gmail.com>
Reviewed-by: Joel Jacobson <joel@compiler.org>
Reviewed-by: Andrew Dunstan <andrew@dunslane.net>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Reviewed-by: jian he <jian.universality@gmail.com>
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Ashutosh Bapat <ashutosh.bapat.oss@gmail.com>
Reviewed-by: Isaac Morland <isaac.morland@gmail.com>
Reviewed-by: Alexandra Wang <alexandra.wang.oss@gmail.com>
Tested-by: Triveni N <triveni.n@enterprisedb.com>
Discussion: https://www.postgresql.org/message-id/flat/CAAJ_b962c5AcYW9KUt_R_ER5qs3fUGbe4az-SP-vuwPS-w-AGA@mail.gmail.com
Even after reaching the minimum recovery point, if there are long-lived
write transactions with 64 subtransactions on the primary, the recovery
snapshot may not yet be ready for hot standby, delaying read-only
connections on the standby. Previously, when read-only connections were
not accepted due to this condition, the following error message was logged:
FATAL: the database system is not yet accepting connections
DETAIL: Consistent recovery state has not been yet reached.
This DETAIL message was misleading because the following message was
already logged in this case:
LOG: consistent recovery state reached
This contradiction, i.e., indicating that the recovery state was consistent
while also stating it wasn’t, caused confusion.
This commit improves the error message to better reflect the actual state:
FATAL: the database system is not yet accepting connections
DETAIL: Recovery snapshot is not yet ready for hot standby.
HINT: To enable hot standby, close write transactions with more than 64 subtransactions on the primary server.
To implement this, the commit introduces a new postmaster signal,
PMSIGNAL_RECOVERY_CONSISTENT. When the startup process reaches
a consistent recovery state, it sends this signal to the postmaster,
allowing it to correctly recognize that state.
Since this is not a clear bug, the change is applied only to the master
branch and is not back-patched.
Author: Atsushi Torikoshi <torikoshia@oss.nttdata.com>
Co-authored-by: Fujii Masao <masao.fujii@gmail.com>
Reviewed-by: Yugo Nagata <nagata@sraoss.co.jp>
Discussion: https://postgr.es/m/02db8cd8e1f527a8b999b94a4bee3165@oss.nttdata.com
Create a function that will sort the elements of an array
according to the element type's sort order. If the array
has more than one dimension, the sub-arrays of the first
dimension are sorted per normal array-comparison rules,
leaving their contents alone.
In support of this, add pg_type.typarray to the set of fields
cached by the typcache.
Author: Junwang Zhao <zhjwpku@gmail.com>
Co-authored-by: Jian He <jian.universality@gmail.com>
Reviewed-by: Aleksander Alekseev <aleksander@timescale.com>
Discussion: https://postgr.es/m/CAEG8a3J41a4dpw_-F94fF-JPRXYxw-GfsgoGotKcjs9LVfEEvw@mail.gmail.com
--copy-file-range and --swap were not mentioned in a few places
that discuss the available file transfer modes. This entire page
would likely benefit from an overhaul, but that's v19 material at
this point.
Oversights in commits d93627bcbe and 626d7236b6.
These are fairly basic, but better than nothing. While there are several
opportunities to link to these entries, this patch does not add any. They will
however be referenced by future patches.
Reviewed-by: Noah Misch <noah@leadboat.com>
Discussion: https://postgr.es/m/20250326183102.92.nmisch@google.com
hot_standby_feedback mechanics assume that clocks are synchronized,
but it was not clear from documentation.
Author: Jakub Wartak <jakub.wartak@enterprisedb.com>
Reviewed-by: Euler Taveira <euler@eulerto.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Reviewed-by: vignesh C <vignesh21@gmail.com>
Discussion: https://postgr.es/m/CAKZiRmwBcALLrDgCyEhHP1enUxtPMjyNM_d1A2Lng3_6Rf4Qfw%40mail.gmail.com
Previously effective_io_concurrency and maintenance_io_concurrency could not
be set above 0 on machines without fadvise support. AIO enables IO concurrency
without such support, via io_method=worker.
Currently only subsystems using the read stream API will take advantage of
this. Other users of maintenance_io_concurrency (like recovery prefetching)
which leverage OS advice directly will not benefit from this change. In those
cases, maintenance_io_concurrency will have no effect on I/O behavior.
Author: Melanie Plageman <melanieplageman@gmail.com>
Reviewed-by: Noah Misch <noah@leadboat.com>
Discussion: https://postgr.es/m/CAAKRu_atGgZePo=_g6T3cNtfMf0QxpvoUh5OUqa_cnPdhLd=gw@mail.gmail.com
With AIO it does not make sense anymore to track the time for each individual
IO, as multiple IOs can be in-flight at the same time. Instead we now track
the time spent *waiting* for IOs.
This should be reflected in the docs. While, so far, we only do a subset of
reads, and no other operations, via AIO, describing the GUC and view columns
as measuring IO waits is accurate for synchronous and asynchronous IO.
Reviewed-by: Noah Misch <noah@leadboat.com>
Discussion: https://postgr.es/m/5dzyoduxlvfg55oqtjyjehez5uoq6hnwgzor4kkybkfdgkj7ag@rbi4gsmzaczk
Adds a new function, validating two kinds of invariants on a GIN index:
- parent-child consistency: Paths in a GIN graph have to contain
consistent keys. Tuples on parent pages consistently include tuples
from child pages; parent tuples do not require any adjustments.
- balanced-tree / graph: Each internal page has at least one downlink,
and can reference either only leaf pages or only internal pages.
The GIN verification is based on work by Grigory Kryachko, reworked by
Heikki Linnakangas and with various improvements by Andrey Borodin.
Investigation and fixes for multiple bugs by Kirill Reshke.
Author: Grigory Kryachko <GSKryachko@gmail.com>
Author: Heikki Linnakangas <hlinnaka@iki.fi>
Author: Andrey Borodin <amborodin@acm.org>
Reviewed-By: José Villanova <jose.arthur@gmail.com>
Reviewed-By: Aleksander Alekseev <aleksander@timescale.com>
Reviewed-By: Nikolay Samokhvalov <samokhvalov@gmail.com>
Reviewed-By: Andres Freund <andres@anarazel.de>
Reviewed-By: Tomas Vondra <tomas.vondra@enterprisedb.com>
Reviewed-By: Kirill Reshke <reshkekirill@gmail.com>
Reviewed-By: Mark Dilger <mark.dilger@enterprisedb.com>
Reviewed-By: Peter Geoghegan <pg@bowt.ie>
Discussion: https://postgr.es/m/45AC9B0A-2B45-40EE-B08F-BDCF5739D1E1%40yandex-team.ru
The '--all' option indicates that the tool queries the source server
(publisher) for all databases and creates subscriptions on the target
server (subscriber) for databases with matching names. Without this user
needs to explicitly specify all databases by using -d option for each
database.
This simplifies converting a physical standby to a logical subscriber,
particularly during upgrades.
The options '--database', '--publication', '--subscription', and
'--replication-slot' cannot be used when '--all' is specified.
Author: Shubham Khanna <khannashubham1197@gmail.com>
Reviewed-by: vignesh C <vignesh21@gmail.com>
Reviewed-by: Ashutosh Bapat <ashutosh.bapat.oss@gmail.com>
Reviewed-by: Euler Taveira <euler@eulerto.com>
Reviewed-by: Hayato Kuroda <kuroda.hayato@fujitsu.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Reviewed-by: Peter Smith <smithpb2250@gmail.com>
Reviewed-by: Shlok Kyal <shlok.kyal.oss@gmail.com>
Discussion: https://postgr.es/m/CAHv8RjKhA=_h5vAbozzJ1Opnv=KXYQHQ-fJyaMfqfRqPpnC2bA@mail.gmail.com
Commit 62d712ecfd94 introduced the capability to calculate the same
queryId for queries with different lengths of constants in a list for an
IN clause. This behavior was originally enabled with a GUC
query_id_squash_values. After a discussion about the value of such a
GUC, it was decided to back out of the use of a GUC and make the
squashing behavior the only available option.
Author: Sami Imseih <samimseih@gmail.com>
Discussion: https://postgr.es/m/Z-LZyygkkNyA8-kR@msg.df7cb.de
Discussion: https://postgr.es/m/CA+q6zcVTK-3C-8NWV1oY2NZrvtnMCDqnyYYyk1T7WMUG65MeOQ@mail.gmail.com
Commit d45597f72fe5 introduced the ability to change a not-null
constraint from NO INHERIT to INHERIT and vice versa, but we included
the SET noise word in the syntax for it. The SET turns out not to be
necessary and goes against what the SQL standard says for other ALTER
TABLE subcommands, so remove it.
This changes the way this command is processed for constraint types
other than not-null, so there are some error message changes.
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Reviewed-by: Suraj Kharage <suraj.kharage@enterprisedb.com>
Discussion: https://postgr.es/m/202503251602.vsxaehsyaoac@alvherre.pgsql
The implementation of FSM for indexes is simpler than heap, where 0 is
used to track if a page is in-use and (BLCKSZ - 1) if a page is free.
One comment in indexfsm.c and one description in the documentation of
pg_freespacemap were incorrect about that.
Author: Alex Friedman <alexf01@gmail.com>
Discussion: https://postgr.es/m/71eef655-c192-453f-ac45-2772fec2cb04@gmail.com
Backpatch-through: 13
Performing AIO using io_uring can be considerably faster than
io_method=worker, particularly when lots of small IOs are issued, as
a) the context-switch overhead for worker based AIO becomes more significant
b) the number of IO workers can become limiting
io_uring, however, is linux specific and requires an additional compile-time
dependency (liburing).
This implementation is fairly simple and there are substantial optimization
opportunities.
The description of the existing AIO_IO_COMPLETION wait event is updated to
make the difference between it and the new AIO_IO_URING_EXECUTION clearer.
Reviewed-by: Noah Misch <noah@leadboat.com>
Reviewed-by: Jakub Wartak <jakub.wartak@enterprisedb.com>
Discussion: https://postgr.es/m/uvrtrknj4kdytuboidbhwclo4gxhswwcpgadptsjvjqcluzmah%40brqs62irg4dt
Discussion: https://postgr.es/m/20210223100344.llw5an2aklengrmn@alap3.anarazel.de
Discussion: https://postgr.es/m/stj36ea6yyhoxtqkhpieia2z4krnam7qyetc57rfezgk4zgapf@gcnactj4z56m
Ephemeral inconsistencies across multiple attributes of pg_stat_activity
can exist as the system is designed to be efficient with a low overhead.
This question is raised by users from time to time based on the data
read in the view, so let's add a note in the docs about this
possibility.
Author: Alex Friedman <alexf01@gmail.com>
Reviewed-by: Sami Imseih <samimseih@gmail.com>
Discussion: https://postgr.es/m/8a275154-a654-44b0-ab37-197802f04c7b@gmail.com
It added bogus whitespace at the end of a line in the documentation.
It should not have done that.
The pg_overexplain tests must SET debug_parallel_query = false,
not just RESET debug_parallel_query, or we get failures on test
machines that make debug_parallel_query = true the defualt.
There's a fair amount of information in the Plan and PlanState trees
that isn't printed by any existing EXPLAIN option. This means that,
when working on the planner, it's often necessary to rely on facilities
such as debug_print_plan, which produce excessively voluminous
output. Hence, use the new EXPLAIN extension facilities to implement
EXPLAIN (DEBUG) and EXPLAIN (RANGE_TABLE) as extensions to the core
EXPLAIN facility.
A great deal more could be done here, and the specific choices about
what to print and how are definitely arguable, but this is at least
a starting point for discussion and a jumping-off point for possible
future improvements.
Reviewed-by: Sami Imseih <samimseih@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviweed-by: Andrei Lepikhov <lepihov@gmail.com> (who didn't like it)
Discussion: http://postgr.es/m/CA+TgmoZfvQUBWQ2P8iO30jywhfEAKyNzMZSR+uc2xr9PZBw6eQ@mail.gmail.com
This macro allows dynamically loaded shared libraries (modules) to
provide a wired-in module name and version, and possibly other
compile-time-constant fields in future. This information can be
retrieved with the new pg_get_loaded_modules() function.
This feature is expected to be particularly useful for modules
that do not have any exposed SQL functionality and thus are
not associated with a SQL-level extension object. But even for
modules that do belong to extensions, being able to verify the
actual code version can be useful.
Author: Andrei Lepikhov <lepihov@gmail.com>
Reviewed-by: Yurii Rashkovskii <yrashk@omnigres.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/dd4d1b59-d0fe-49d5-b28f-1e463b68fa32@gmail.com
This enables SCRAM authentication for dblink (using dblink_fdw) when
connecting to a foreign server without having to store a plain-text
password on user mapping options
This uses the same approach as it was implemented for postgres_fdw in
commit 761c79508e7. (It also contains the equivalent of the
subsequent fixes 76563f88cfb and d2028e9bbc1.)
Author: Matheus Alcantara <mths.dev@pm.me>
Reviewed-by: Jacob Champion <jacob.champion@enterprisedb.com>
Discussion: https://www.postgresql.org/message-id/flat/CAFY6G8ercA1KES%3DE_0__R9QCTR805TTyYr1No8qF8ZxmMg8z2Q%40mail.gmail.com
These are useful general-purpose math functions which are included in
POSIX and C99, and are commonly included in other math libraries, so
expose them as SQL-callable functions.
Author: Dean Rasheed <dean.a.rasheed@gmail.com>
Reviewed-by: Stepan Neretin <sncfmgg@gmail.com>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Dmitry Koval <d.koval@postgrespro.ru>
Reviewed-by: Alexandra Wang <alexandra.wang.oss@gmail.com>
Discussion: https://postgr.es/m/CAEZATCXpGyfjXCirFk9au+FvM0y2Ah+2-0WSJx7MO368ysNUPA@mail.gmail.com
custom_query_jumble (introduced in 5ac462e2b7ac as a node field
attribute) is now assigned to the expanded reference name "eref" of
RangeTblEntry, adding in the query jumble computation the non-qualified
aliased relation name, without the list of column names. The relation
OID is removed from the query jumbling.
The effects of this change can be seen in the tests added by
3430215fe35f, where pg_stat_statements (PGSS) entries are now grouped
using the relation name, ignoring the relation search_path may point at.
For example, these two relations are different, but are now grouped in a
single PGSS entry as they are assigned the same query ID:
CREATE TABLE foo1.tab (a int);
CREATE TABLE foo2.tab (b int);
SET search_path = 'foo1';
SELECT count(*) FROM tab;
SET search_path = 'foo2';
SELECT count(*) FROM tab;
SELECT count(*) FROM foo1.tab;
SELECT count(*) FROM foo2.tab;
SELECT query, calls FROM pg_stat_statements WHERE query ~ 'FROM tab';
query | calls
--------------------------+-------
SELECT count(*) FROM tab | 4
(1 row)
It is still possible to use an alias in the FROM clause to split these.
This behavior is useful for relations re-created with the same name,
where queries based on such relations would be grouped in the same
PGSS entry. For permanent schemas, it should not really matter in
practice. The main benefit is for workloads that use a lot of temporary
relations, which are usually re-created with the same name continuously.
These can be a heavy source of bloat in PGSS depending on the workload.
Such entries can now be grouped together, improving the user experience.
The original idea from Christoph Berg used catalog lookups to find
temporary relations, something that the query jumble has never done, and
it could cause some performance regressions. The idea to use
RangeTblEntry.eref and the relation name, applying the same rules for
all relations, temporary and not temporary, has been proposed by Tom
Lane. The documentation additions have been suggested by Sami Imseih.
Author: Michael Paquier <michael@paquier.xyz>
Co-authored-by: Sami Imseih <samimseih@gmail.com>
Reviewed-by: Christoph Berg <myon@debian.org>
Reviewed-by: Lukas Fittl <lukas@fittl.com>
Reviewed-by: Sami Imseih <samimseih@gmail.com>
Discussion: https://postgr.es/m/Z9iWXKGwkm8RAC93@msg.df7cb.de
By adding the positive variants of options, in addition to the
negative variants that already exist, users can be explicit about what
pg_dump should produce.
Discussion: https://postgr.es/m/bd0513e4b1ea2b2f2d06f02720c6579711cb62a6.camel@j-davis.com
Reviewed-by: Corey Huinker <corey.huinker@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
This new option instructs pg_upgrade to move the data directories
from the old cluster to the new cluster and then to replace the
catalog files with those generated for the new cluster. This mode
can outperform --link, --clone, --copy, and --copy-file-range,
especially on clusters with many relations.
However, this mode creates many garbage files in the old cluster,
which can prolong the file synchronization step if
--sync-method=syncfs is used. To handle that, we recommend using
--sync-method=fsync with this mode, and pg_upgrade internally uses
"initdb --sync-only --no-sync-data-files" for file synchronization.
pg_upgrade will synchronize the catalog files as they are
transferred. We assume that the database files transferred from
the old cluster were synchronized prior to upgrade.
This mode also complicates reverting to the old cluster, so we
recommend restoring from backup upon failure during or after file
transfer. We did consider teaching pg_upgrade how to generate a
revert script for such failures, but we decided against it due to
the rarity of failing during file transfer, the complexity of
generating the script, and the potential for misusing the script.
The new mode is limited to clusters located in the same file
system. With some effort, we could probably support upgrades
between different file systems, but this mode is unlikely to offer
much benefit if we have to copy the files across file system
boundaries.
It is also limited to upgrades from version 10 or newer. There are
a few known obstacles for using swap mode to upgrade from older
versions. For example, the visibility map format changed in v9.6,
and the sequence tuple format changed in v10. In fact, swap mode
omits the --sequence-data option in its uses of pg_dump and instead
reuses the old cluster's sequence data files. While teaching swap
mode to deal with these kinds of changes is surely possible (and we
may have to deal with similar problems in the future, anyway), it
doesn't seem worth the effort to support upgrades from
long-unsupported versions.
Reviewed-by: Greg Sabino Mullane <htamfids@gmail.com>
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Discussion: https://postgr.es/m/Zyvop-LxLXBLrZil%40nathan
This new option instructs pg_dump to dump sequence data when the
--no-data, --schema-only, or --statistics-only option is specified.
This was originally considered for commit a7e5457db8, but it was
left out at that time because there was no known use-case. A
follow-up commit will use this to optimize pg_upgrade's file
transfer step.
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Discussion: https://postgr.es/m/Zyvop-LxLXBLrZil%40nathan
This new option instructs initdb to skip synchronizing any files
in database directories, the database directories themselves, and
the tablespace directories, i.e., everything in the base/
subdirectory and any other tablespace directories. Other files,
such as those in pg_wal/ and pg_xact/, will still be synchronized
unless --no-sync is also specified. --no-sync-data-files is
primarily intended for internal use by tools that separately ensure
the skipped files are synchronized to disk. A follow-up commit
will use this to help optimize pg_upgrade's file transfer step.
The --sync-method=fsync implementation of this option makes use of
a new exclude_dir parameter for walkdir(). When not NULL,
exclude_dir specifies a directory to skip processing. The
--sync-method=syncfs implementation of this option just skips
synchronizing the non-default tablespace directories. This means
that initdb will still synchronize some or all of the database
files, but there's not much we can do about that.
Discussion: https://postgr.es/m/Zyvop-LxLXBLrZil%40nathan
For import and export, use schemaname/relname rather than
regclass.
This is more natural during export, fits with the other arguments
better, and it gives better control over error handling in case we
need to downgrade more errors to warnings.
Also, use text for the argument types for schemaname, relname, and
attname so that casts to "name" are not required.
Author: Corey Huinker <corey.huinker@gmail.com>
Discussion: https://postgr.es/m/CADkLM=ceOSsx_=oe73QQ-BxUFR2Cwqum7-UP_fPe22DBY0NerA@mail.gmail.com
The default interval for \watch to wait between executing queries,
when executed without a specified interval, was hardcoded to two
seconds. This adds the new variable WATCH_INTERVAL which is used
to set the default interval, making it configurable for the user.
This makes \watch the first command which has a user configurable
default setting.
Author: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Kirill Reshke <reshkekirill@gmail.com>
Reviewed-by: Masahiro Ikeda <ikedamsh@oss.nttdata.com>
Reviewed-by: Laurenz Albe <laurenz.albe@cybertec.at>
Reviewed-by: Greg Sabino Mullane <htamfids@gmail.com>
Reviewed-by: Ashutosh Bapat <ashutosh.bapat.oss@gmail.com>
Discussion: https://postgr.es/m/B2FD26B4-8F64-4552-A603-5CC3DF1C7103@yesql.se
