A report from Andrew Dunstan showed that an ecpglib breakage that
causes repeated query failures could lead to infinite loops in some
ecpg test scripts, because they contain "while(1)" loops with no
exit condition other than successful test completion. That might
be all right for manual testing, but it seems entirely unacceptable
for automated test environments such as our buildfarm. We don't
want buildfarm owners to have to intervene manually when a test
goes wrong.
To fix, just change all those while(1) loops to exit after at most
100 iterations (which is more than any of them expect to iterate).
This seems sufficient since we'd see discrepancies in the test output
if any loop executed the wrong number of times.
I tested this by dint of intentionally breaking ecpg_do_prologue
to always fail, and verifying that the tests still got to completion.
Back-patch to all supported branches, since the whole point of this
exercise is to protect the buildfarm against future mistakes.
Discussion: https://postgr.es/m/18693.1548302004@sss.pgh.pa.us
In commit ecfd55795, I removed sqlda.c's checks for ndigits != 0 on the
grounds that we should duplicate the state of the numeric value's digit
buffer even when all the digits are zeroes. However, that still isn't
quite right, because another possible state of the digit buffer is
buf == digits == NULL (this occurs for a NaN). As the code now stands,
it'll invoke memcpy with a NULL source address and zero bytecount,
which we know a few platforms crash on. Hence, reinstate the no-copy
short-circuit, but make it test specifically for buf != NULL rather than
some other condition. In hindsight, the ndigits test (added by commit
f2ae9f9c3) was almost certainly meant to fix the NaN case not the
all-zeroes case as the associated thread alleged.
As before, back-patch to all supported versions.
Discussion: https://postgr.es/m/1803D792815FC24D871C00D17AE95905C71161@g01jpexmbkw24
Numeric values with leading zeroes were incorrectly copied into a
SQLDA (SQL Descriptor Area), leading to wrong results in ECPG programs.
Report and patch by Daisuke Higuchi. Back-patch to all supported
versions.
Discussion: https://postgr.es/m/1803D792815FC24D871C00D17AE95905C71161@g01jpexmbkw24
Back-patch commit dddfc4cb2, which broke LDFLAGS and related Makefile
variables into two parts, one for within-build-tree library references and
one for external libraries, to ensure that the order of -L flags has all
of the former before all of the latter. This turns out to fix a problem
recently noted on buildfarm member peripatus, that we attempted to
incorporate code from libpgport.a into a shared library. That will fail on
platforms that are sticky about putting non-PIC code into shared libraries.
(It's quite surprising we hadn't seen such failures before, since the code
in question has been like that for a long time.)
I think that peripatus' problem could have been fixed with just a subset
of this patch; but since the previous issue of accidentally linking to the
wrong copy of a Postgres shlib seems likely to bite people in the field,
let's just back-patch the whole change. Now that commit dddfc4cb2 has
survived some beta testing, I'm less afraid to back-patch it than I was
at the time.
This also fixes undesired inclusion of "-DFRONTEND" in pg_config's CPPFLAGS
output (in 9.6 and up) and undesired inclusion of "-L../../src/common" in
its LDFLAGS output (in all supported branches).
Back-patch to v10 and older branches; this is already in v11.
Discussion: https://postgr.es/m/20180704234304.bq2dxispefl65odz@ler-imac.local
On Windows, it is sometimes important for corresponding malloc() and
free() calls to be made from the same DLL, since some build options can
result in multiple allocators being active at the same time. For that
reason we already provided PQfreemem(). This commit adds a similar
function for freeing string results allocated by the pgtypes library.
Author: Takayuki Tsunakawa
Reviewed-by: Kyotaro Horiguchi
Discussion: https://postgr.es/m/0A3221C70F24FB45833433255569204D1F8AD5D6%40G01JPEXMBYT05
The "l" (ell) width spec means something in the corresponding scanf usage,
but not here. While modern POSIX says that applying "l" to "f" and other
floating format specs is a no-op, SUSv2 says it's undefined. Buildfarm
experience says that some old compilers emit warnings about it, and at
least one old stdio implementation (mingw's "ANSI" option) actually
produces wrong answers and/or crashes.
Discussion: https://postgr.es/m/21670.1526769114@sss.pgh.pa.us
Discussion: https://postgr.es/m/c085e1da-0d64-1c15-242d-c921f32e0d5c@dunslane.net
This will only actually exercise the "long long" code paths on platforms
where "long" is 32 bits --- otherwise, the SQL bigint type maps to
plain "long", and we will test that code path instead. But that's
probably sufficient coverage, and anyway we weren't testing either
code path before.
Dang Minh Huong, tweaked a bit by me
Discussion: https://postgr.es/m/151935568942.1461.14623890240535309745@wrigleys.postgresql.org
This suite had been a proper superset of the regular ecpg test suite,
but the three newest tests didn't reach it. To make this less likely to
recur, delete the extra schedule file and pass the TCP-specific test on
the command line. Back-patch to 9.3 (all supported versions).
Since commit 868898739a8da9ab74c105b8349b7b5c711f265a, it has assumed
"localhost" resolves to both ::1 and 127.0.0.1. We gain nothing from
that assumption, and it does not hold in a default installation of Red
Hat Enterprise Linux 5. Back-patch to 9.3 (all supported versions).
Makefile.global assigns this prerequisite to every target named "check",
but similar targets must mention it explicitly. Affected targets
failed, tested $PATH binaries, or tested a stale temporary installation.
The src/test/modules examples worked properly when called as "make -C
src/test/modules/$FOO check", but "make -j" allowed the test to start
before the temporary installation was in place. Back-patch to 9.5,
where commit dcae5faccab64776376d354decda0017c648bb53 introduced the
shared temp-install.
To ensure that "make installcheck" can be used safely against an existing
installation, we need to be careful about what global object names
(database, role, and tablespace names) we use; otherwise we might
accidentally clobber important objects. There's been a weak consensus that
test databases should have names including "regression", and that test role
names should start with "regress_", but we didn't have any particular rule
about tablespace names; and neither of the other rules was followed with
any consistency either.
This commit moves us a long way towards having a hard-and-fast rule that
regression test databases must have names including "regression", and that
test role and tablespace names must start with "regress_". It's not
completely there because I did not touch some test cases in rolenames.sql
that test creation of special role names like "session_user". That will
require some rethinking of exactly what we want to test, whereas the intent
of this patch is just to hit all the cases in which the needed renamings
are cosmetic.
There is no enforcement mechanism in this patch either, but if we don't
add one we can expect that the tests will soon be violating the convention
again. Again, that's not such a cosmetic change and it will require
discussion. (But I did use a quick-hack enforcement patch to find these
cases.)
Discussion: <16638.1468620817@sss.pgh.pa.us>
Before, make check-world would create a new temporary installation for
each test suite, which is slow and wasteful. Instead, we now create one
test installation that is used by all test suites that are part of a
make run.
The management of the temporary installation is removed from pg_regress
and handled in the makefiles. This allows for better control, and
unifies the code with that of test suites not run through pg_regress.
review and msvc support by Michael Paquier <michael.paquier@gmail.com>
more review by Fabien Coelho <coelho@cri.ensmp.fr>
When ecpg was rewritten to the new protocol version not all variable types
were corrected. This patch rewrites the code for these types to fix that. It
also fixes the documentation to correctly tell the status of array handling.
strncpy() has a well-deserved reputation for being unsafe, so make an
effort to get rid of nearly all occurrences in HEAD.
A large fraction of the remaining uses were passing length less than or
equal to the known strlen() of the source, in which case no null-padding
can occur and the behavior is equivalent to memcpy(), though doubtless
slower and certainly harder to reason about. So just use memcpy() in
these cases.
In other cases, use either StrNCpy() or strlcpy() as appropriate (depending
on whether padding to the full length of the destination buffer seems
useful).
I left a few strncpy() calls alone in the src/timezone/ code, to keep it
in sync with upstream (the IANA tzcode distribution). There are also a
few such calls in ecpg that could possibly do with more analysis.
AFAICT, none of these changes are more than cosmetic, except for the four
occurrences in fe-secure-openssl.c, which are in fact buggy: an overlength
source leads to a non-null-terminated destination buffer and ensuing
misbehavior. These don't seem like security issues, first because no stack
clobber is possible and second because if your values of sslcert etc are
coming from untrusted sources then you've got problems way worse than this.
Still, it's undesirable to have unpredictable behavior for overlength
inputs, so back-patch those four changes to all active branches.
Cygwin builds require this of dependencies pertaining to pattern rules.
On Cygwin, stat("foo") in the absence of a file with that exact name can
locate foo.exe. While GNU make uses stat() for dependencies of ordinary
rules, it uses readdir() to assess dependencies of pattern rules.
Therefore, a pattern rule dependency should match any underlying file
name exactly. Back-patch to 9.4, where the dependency was introduced.
In support of this, have the MSVC build follow GNU make in preferring
GNUmakefile over Makefile when a directory contains both.
Michael Paquier, reviewed by MauMau.
Prominent binaries already had this metadata. A handful of minor
binaries, such as pg_regress.exe, still lack it; efforts to eliminate
such exceptions are welcome.
Michael Paquier, reviewed by MauMau.
Give passwords to each user created in support of an ECPG connection
test case. Use SET SESSION AUTHORIZATION, not a fresh connection, to
reduce privileges during a dblink test case.
To test against such a server, both the "make installcheck-world"
environment and the postmaster environment must provide the default
user's password; $PGPASSFILE is the principal way to do so. (The
postmaster environment needs it for dblink and postgres_fdw tests.)
Ensure that ecpg preprocessor output files are rebuilt when re-testing
after a change in the ecpg preprocessor itself, or a change in any of
several include files that get copied verbatim into the output files.
The lack of these dependencies was what created problems for Kevin Grittner
after the recent pgindent run. There's no way for --enable-depend to
discover these dependencies automatically, so we've gotta put them into
the Makefiles by hand.
While at it, reduce the amount of duplication in the ecpg invocations.
Commit 4318daecc959886d001a6e79c6ea853e8b1dfb4b broke it. The change in
sub-second precision at extreme dates is normal. The inconsistent
truncation vs. rounding is essentially a bug, albeit a longstanding one.
Back-patch to 8.4, like the causative commit.
It's easy to forget using SYSTEMQUOTEs when constructing command strings
for system() or popen(). Even if we fix all the places missing it now, it is
bound to be forgotten again in the future. Introduce wrapper functions that
do the the extra quoting for you, and get rid of SYSTEMQUOTEs in all the
callers.
We previosly used SYSTEMQUOTEs in all the hard-coded command strings, and
this doesn't change the behavior of those. But user-supplied commands, like
archive_command, restore_command, COPY TO/FROM PROGRAM calls, as well as
pgbench's \shell, will now gain an extra pair of quotes. That is desirable,
but if you have existing scripts or config files that include an extra
pair of quotes, those might need to be adjusted.
Reviewed by Amit Kapila and Tom Lane
Many server functions use the MAXDATELEN constant to size a buffer for
parsing or displaying a datetime value. It was much too small for the
longest possible interval output and slightly too small for certain
valid timestamp input, particularly input with a long timezone name.
The long input was rejected needlessly; the long output caused
interval_out() to overrun its buffer. ECPG's pgtypes library has a copy
of the vulnerable functions, which bore the same vulnerabilities along
with some of its own. In contrast to the server, certain long inputs
caused stack overflow rather than failing cleanly. Back-patch to 8.4
(all supported versions).
Reported by Daniel Schüssler, reviewed by Tom Lane.
Security: CVE-2014-0063
Split the rather long ecpg_execute() function into ecpg_build_params(),
ecpg_autostart_transaction(), a smaller ecpg_execute() and
ecpg_process_output(). There is no user-visible change here, only code
reorganization to support future patches.
Author: Zoltán Böszörményi
Reviewed by Antonin Houska. Larger, older versions of this patch were
reviewed by Noah Misch and Michael Meskes.
This splits ECPGdo() into ecpg_prologue(), ecpg_do() and
ecpg_epilogue(), and renames free_params() into ecpg_free_params() and
exports it. This makes it possible for future code to use these
routines for their own purposes.
There is no user-visible functionality change here, only code
reorganization.
Zoltán Böszörményi
Reviewed by Antonin Houska. Larger, older versions of this patch were
reviewed by Noah Misch and Michael Meskes.
While working on most platforms the old way sometimes created alignment
problems. This should fix it. Also the regresion tests were updated to test for
the reported case.
Report and fix by MauMau <maumau307@gmail.com>
Commit 9b4d52f2095be96ca238ce41f6963ec56376491f failed to notice
that pg_regress_ecpg needed updating.
This patch was independently submitted by both David Rowley
and Andres Freund.
asprintf(), aside from not being particularly portable, has a fundamentally
badly-designed API; the psprintf() function that was added in passing in
the previous patch has a much better API choice. Moreover, the NetBSD
implementation that was borrowed for the previous patch doesn't work with
non-C99-compliant vsnprintf, which is something we still have to cope with
on some platforms; and it depends on va_copy which isn't all that portable
either. Get rid of that code in favor of an implementation similar to what
we've used for many years in stringinfo.c. Also, move it into libpgcommon
since it's not really libpgport material.
I think this patch will be enough to turn the buildfarm green again, but
there's still cosmetic work left to do, namely get rid of pg_asprintf()
in favor of using psprintf(). That will come in a followon patch.
Add asprintf(), pg_asprintf(), and psprintf() to simplify string
allocation and composition. Replacement implementations taken from
NetBSD.
Reviewed-by: Álvaro Herrera <alvherre@2ndquadrant.com>
Reviewed-by: Asif Naeem <anaeem.it@gmail.com>
