I realized that the third overflow case I posited in commit b0e9e4d76
actually should be handled in a different way: rather than tolerating
the idea that the quotient could round to 1, we should clamp so that
the output cannot be more than "count" when we know that the operand is
less than bound2. That being the case, we don't need an overflow-aware
increment in that code path, which leads me to revert the movement of
the pg_add_s32_overflow() call. (The diff in width_bucket_float8
might be easier to read by comparing against b0e9e4d76^.)
What's more, width_bucket_numeric also has this problem of the quotient
potentially rounding to 1, so add a clamp there too.
As before, I'm not quite convinced that a back-patch is warranted.
Discussion: https://postgr.es/m/391415.1680268470@sss.pgh.pa.us
In instr_time.h it is stated that:
* When summing multiple measurements, it's recommended to leave the
* running sum in instr_time form (ie, use INSTR_TIME_ADD or
* INSTR_TIME_ACCUM_DIFF) and convert to a result format only at the end.
The reason for that is that converting to microseconds is not cheap, and can
loose precision. Therefore this commit changes 'PendingWalStats' to use
'instr_time' instead of 'PgStat_Counter' while accumulating 'wal_write_time'
and 'wal_sync_time'.
Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-by: Melanie Plageman <melanieplageman@gmail.com>
Discussion: https://postgr.es/m/1feedb83-7aa9-cb4b-5086-598349d3f555@gmail.com
The original coding of this function paid little attention to the
possibility of overflow. There were actually three different hazards:
1. The range from bound1 to bound2 could exceed DBL_MAX, which on
IEEE-compliant machines produces +Infinity in the subtraction.
At best we'd lose all precision in the result, and at worst
produce NaN due to dividing Inf/Inf. The range can't exceed
twice DBL_MAX though, so we can fix this case by scaling all the
inputs by 0.5.
2. We computed count * (operand - bound1), which is also at risk of
float overflow, before dividing. Safer is to do the division first,
producing a quotient that should be in [0,1), and even after allowing
for roundoff error can't be outside [0,1]; then multiplying by count
can't produce a result overflowing an int. (width_bucket_numeric does
the multiplication first on the grounds that that improves accuracy of
its result, but I don't think that a similar argument can be made in
float arithmetic.)
3. If the division result does round to 1, and count is INT_MAX,
the final addition of 1 would overflow an int. We took care
of that in the operand >= bound2 case but did not consider that
it could be possible in the main path. Fix that by moving the
overflow-aware addition of 1 so it is done that way in all cases.
The fix for point 2 creates a possibility that values very close to
a bucket boundary will be rounded differently than they were before.
I'm not troubled by that for HEAD, but it is an argument against
putting this into the stable branches. Given that the cases being
fixed here are fairly extreme and unlikely to be hit in normal use,
it seems best not to back-patch.
Mats Kindahl and Tom Lane
Discussion: https://postgr.es/m/17876-61f280d1601f978d@postgresql.org
In ancient times, these belonged to arguments or fields that were
actually of type long, but now they are not anymore, so this "L"
decoration is just confusing. (Some other 0L and other "L" constants
remain, where they are actually associated with a long type.)
For ICU collations, ensure that the locale's language exists in ICU,
and that the locale can be opened.
Basic validation helps avoid minor mistakes and misspellings, which
often fall back to the root locale instead of the intended
locale. It's even more important to avoid such mistakes in ICU
versions 54 and earlier, where the same (misspelled) locale string
could fall back to different locales depending on the environment.
Discussion: https://postgr.es/m/11b1eeb7e7667fdd4178497aeb796c48d26e69b9.camel@j-davis.com
Discussion: https://postgr.es/m/df2efad0cae7c65180df8e5ebb709e5eb4f2a82b.camel@j-davis.com
Reviewed-by: Peter Eisentraut
To support older ICU versions, we rely on
icu_set_collation_attributes() to do error checking that is handled
directly by ucol_open() in newer ICU versions. Commit 3b50275b12
introduced a slight inconsistency, where the error report includes the
fixed-up locale string, rather than the locale string passed to
pg_ucol_open().
Refactor slightly so that pg_ucol_open() handles the errors from both
ucol_open() and icu_set_collation_attributes(), making it easier to
see any differences between the error reports. It also makes
pg_ucol_open() responsible for closing the UCollator on error, which
seems like the right place.
Discussion: https://postgr.es/m/04182066-7655-344a-b8b7-040b1b2490fb%40enterprisedb.com
Reviewed-by: Peter Eisentraut
Two new macros are added with their respective functions switched to
use them. These are for functions with millisecond stats, with and
without "xact" in their names (for the stats that can be tracked within
a transaction).
While on it, prefix the macro for float8 on database entries with "_MS",
as it does a us->ms conversion, based on a suggestion from Andres
Freund.
Author: Bertrand Drouvot
Discussion: https://postgr.es/m/6e2efb4f-6fd0-807e-f6bf-94207db8183a@gmail.com
Replace the hardcoded value with a GUC such that the iteration
count can be raised in order to increase protection against
brute-force attacks. The hardcoded value for SCRAM iteration
count was defined to be 4096, which is taken from RFC 7677, so
set the default for the GUC to 4096 to match. In RFC 7677 the
recommendation is at least 15000 iterations but 4096 is listed
as a SHOULD requirement given that it's estimated to yield a
0.5s processing time on a mobile handset of the time of RFC
writing (late 2015).
Raising the iteration count of SCRAM will make stored passwords
more resilient to brute-force attacks at a higher computational
cost during connection establishment. Lowering the count will
reduce computational overhead during connections at the tradeoff
of reducing strength against brute-force attacks.
There are however platforms where even a modest iteration count
yields a too high computational overhead, with weaker password
encryption schemes chosen as a result. In these situations,
SCRAM with a very low iteration count still gives benefits over
weaker schemes like md5, so we allow the iteration count to be
set to one at the low end.
The new GUC is intentionally generically named such that it can
be made to support future SCRAM standards should they emerge.
At that point the value can be made into key:value pairs with
an undefined key as a default which will be backwards compatible
with this.
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Jonathan S. Katz <jkatz@postgresql.org>
Discussion: https://postgr.es/m/F72E7BC7-189F-4B17-BF47-9735EB72C364@yesql.se
The nested-arrays code path in ExecEvalArrayExpr() used palloc to
allocate the result array, whereas every other array-creating function
has used palloc0 since 18c0b4ecc. This mostly works, but unused bits
past the end of the nulls bitmap may end up undefined. That causes
valgrind complaints with -DWRITE_READ_PARSE_PLAN_TREES, and could
cause planner misbehavior as cited in 18c0b4ecc. There seems no very
good reason why we should strive to avoid palloc0 in just this one case,
so fix it the easy way with s/palloc/palloc0/.
While looking at that I noted that we also failed to check for overflow
of "nbytes" and "nitems" while summing the sizes of the sub-arrays,
potentially allowing a crash due to undersized output allocation.
For "nbytes", follow the policy used by other array-munging code of
checking for overflow after each addition. (As elsewhere, the last
addition of the array's overhead space doesn't need an extra check,
since palloc itself will catch a value between 1Gb and 2Gb.)
For "nitems", there's no very good reason to sum the inputs at all,
since we can perfectly well use ArrayGetNItems' result instead of
ignoring it.
Per discussion of this bug, also remove redundant zeroing of the
nulls bitmap in array_set_element and array_set_slice.
Patch by Alexander Lakhin and myself, per bug #17858 from Alexander
Lakhin; thanks also to Richard Guo. These bugs are a dozen years old,
so back-patch to all supported branches.
Discussion: https://postgr.es/m/17858-8fd287fd3663d051@postgresql.org
When extracting an attr from a cached tuple in the syscache with
SysCacheGetAttr the isnull parameter must be checked in case the
attr cannot be NULL. For cases when this is known beforehand, a
wrapper is introduced which perform the errorhandling internally
on behalf of the caller, invoking an elog in case of a NULL attr.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Reviewed-by: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/AD76405E-DB45-46B6-941F-17B1EB3A9076@yesql.se
The "partitions_total" and "partitions_done" fields were updated
as though the current level of partitioning was the only one.
In multi-level cases, not only could partitions_total change
over the course of the command, but partitions_done could go
backwards or exceed the currently-reported partitions_total.
Fix by setting partitions_total to the total number of direct
and indirect children once at command start, and then just
incrementing partitions_done at appropriate points. Invent
a new progress monitoring function "pgstat_progress_incr_param"
to simplify doing the latter. We can avoid adding cost for the
former when doing CREATE INDEX, because ProcessUtility already
enumerates the children and it's pretty easy to pass the count
down to DefineIndex. In principle the same could be done in
ALTER TABLE, but that's structurally difficult; for now, just
eat the cost of an extra find_all_inheritors scan in that case.
Ilya Gladyshev and Justin Pryzby
Discussion: https://postgr.es/m/a15f904a70924ffa4ca25c3c744cff31e0e6e143.camel@gmail.com
ICU versions 53 and earlier rely on icu_set_collation_attributes() to
process the attributes in the locale string. Avoid leaking the
already-opened UCollator object if an error is encountered.
Discussion: https://postgr.es/m/04182066-7655-344a-b8b7-040b1b2490fb%40enterprisedb.com
Reviewed-by: Peter Eisentraut
The fields of NLSVERSIONINFOEX are of type DWORD, which is unsigned
long, so the results of the computations being printed are also of
type unsigned long.
This commit renames the members of a few pgstat structures related to
functions and relations, by respectively removing their prefix "f_" and
"t_". The statistics for functions and relations and handled in their
own file, and pgstatfuncs.c associates each field in a structure
variable named based on the object type handled, so no information is
lost with this rename.
This will help with some of the refactoring aimed for pgstatfuncs.c, as
this makes more consistent the field names with the SQL functions
retrieving them.
Author: Bertrand Drouvot
Reviewed-by: Michael Paquier, Melanie Plageman
Discussion: https://postgr.es/m/9142f62a-a422-145c-bde0-b5bc498a4ada@gmail.com
Add pgstat counter to track row updates that result in the successor
version going to a new heap page, leaving behind an original version
whose t_ctid points to the new version. The current count is shown by
the n_tup_newpage_upd column of each of the pg_stat_*_tables views.
The new n_tup_newpage_upd column complements the existing n_tup_hot_upd
and n_tup_upd columns. Tables that have high n_tup_newpage_upd values
(relative to n_tup_upd) are good candidates for tuning heap fillfactor.
Corey Huinker, with small tweaks by me.
Author: Corey Huinker <corey.huinker@gmail.com>
Reviewed-By: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CADkLM=ded21M9iZ36hHm-vj2rE2d=zcKpUQMds__Xm2pxLfHKA@mail.gmail.com
The "und" locale is an alternative spelling of the root locale, but it
was not recognized until ICU 55. To maintain common behavior across
all supported ICU versions, check for "und" and replace with "root"
before opening.
Previously, the lack of support for "und" was dangerous, because
versions 54 and older fall back to the environment when a locale is
not found. If the user specified "und" for the language (which is
expected and documented), it could not only resolve to the wrong
collator, but it could unexpectedly change (which could lead to
corrupt indexes).
This effectively reverts commit d72900bded, which worked around the
problem for the built-in "unicode" collation, and is no longer
necessary.
Discussion: https://postgr.es/m/60da0cecfb512a78b8666b31631a636215d8ce73.camel@j-davis.com
Discussion: https://postgr.es/m/0c6fa66f2753217d2a40480a96bd2ccf023536a1.camel@j-davis.com
Reviewed-by: Peter Eisentraut
Hide details of supporting older ICU versions in a wrapper
function. The current code only needs to handle
icu_set_collation_attributes(), but a subsequent commit will add
additional version-specific code.
Discussion: https://postgr.es/m/7ee414ad-deb5-1144-8a0e-b34ae3b71cd5@enterprisedb.com
Reviewed-by: Peter Eisentraut
* Commit 3048898e dropped -ING from PHJ wait event names. Update the
corresponding barrier phases names to match.
* Rename the "DONE" phases to "FREE". That's symmetrical with
"ALLOCATE", and names the activity that actually happens in that phase
(as we do for the other phases) rather than a state. The bug fixed by
commit 8d578b9b might have been more obvious with this name.
* Rename the batch/bucket growth barriers' "ALLOCATE" phases to
"REALLOCATE", a better description of what they do.
* Update the high level comments about phases to highlight phases
are executed by a single process with an asterisk (mostly memory
management phases).
No behavior change, as this is just improving internal identifiers. The
only user-visible sign of this is that a couple of wait events' display
names change from "...Allocate" to "...Reallocate" in pg_stat_activity,
to stay in sync with the internal names.
Reviewed-by: Melanie Plageman <melanieplageman@gmail.com>
Discussion: https://postgr.es/m/CA%2BhUKG%2BMDpwF2Eo2LAvzd%3DpOh81wUTsrwU1uAwR-v6OGBB6%2B7g%40mail.gmail.com
When determining whether an index update may be skipped by using HOT, we
can ignore attributes indexed by block summarizing indexes without
references to individual tuples that need to be cleaned up.
A new type TU_UpdateIndexes provides a signal to the executor to
determine which indexes to update - no indexes, all indexes, or only the
summarizing indexes.
This also removes rd_indexattr list, and replaces it with rd_attrsvalid
flag. The list was not used anywhere, and a simple flag is sufficient.
This was originally committed as 5753d4ee32, but then got reverted by
e3fcca0d0d because of correctness issues.
Original patch by Josef Simanek, various fixes and improvements by Tomas
Vondra and me.
Authors: Matthias van de Meent, Josef Simanek, Tomas Vondra
Reviewed-by: Tomas Vondra, Alvaro Herrera
Discussion: https://postgr.es/m/05ebcb44-f383-86e3-4f31-0a97a55634cf@enterprisedb.com
Discussion: https://postgr.es/m/CAFp7QwpMRGcDAQumN7onN9HjrJ3u4X3ZRXdGFT0K5G2JWvnbWg%40mail.gmail.com
Add versions of timestamptz + interval, timestamptz - interval, and
generate_series(timestamptz, ...) in which a timezone can be specified
explicitly instead of defaulting to the TimeZone GUC setting.
The new functions for the first two are named date_add and
date_subtract. This might seem too generic, but we could use
overloading to add additional variants if that seems useful.
Along the way, improve the docs' pretty inadequate explanation
of how timestamptz +- interval works.
Przemysław Sztoch and Gurjeet Singh; cosmetic changes and most of
the docs work by me
Discussion: https://postgr.es/m/01a84551-48dd-1359-bf7e-f6b0203a6bd0@sztoch.pl
We already had five copies of essentially the same logic, and an
upcoming patch introduces yet another use-case. That's past my
threshold of pain, so introduce a common subroutine. There's not
that much net code savings, but the chance of typos should go down.
Inspired by a patch from Przemysław Sztoch, but different in detail.
Discussion: https://postgr.es/m/01a84551-48dd-1359-bf7e-f6b0203a6bd0@sztoch.pl
Check whether the datctype is C to determine whether t_isspace() and
related functions use isspace() or iswspace().
Previously, t_isspace() checked whether the database default collation
was C; which is incorrect when the default collation uses the ICU
provider.
Discussion: https://postgr.es/m/79e4354d9eccfdb00483146a6b9f6295202e7890.camel@j-davis.com
Reviewed-by: Peter Eisentraut
Backpatch-through: 15
gcc 12+ has complaints like the following:
../../../../../pgsql/src/backend/utils/adt/network.c: In function 'inetnot':
../../../../../pgsql/src/backend/utils/adt/network.c:1893:34: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
1893 | pdst[nb] = ~pip[nb];
| ~~~~~~~~~^~~~~~~~~~
../../../../../pgsql/src/include/utils/inet.h:27:23: note: at offset -1 into destination object 'ipaddr' of size 16
27 | unsigned char ipaddr[16]; /* up to 128 bits of address */
| ^~~~~~
../../../../../pgsql/src/include/utils/inet.h:27:23: note: at offset -1 into destination object 'ipaddr' of size 16
This is due to a compiler bug:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=104986
It has been a year since the bug has been reported without getting fixed. As
the warnings are verbose and use of gcc 12 is becoming more common, it seems
worth working around the bug. Particularly because a simple reformulation of
the loop condition fixes the issue and isn't any less readable.
Author: Tom Lane <tgl@sss.pgh.pa.us>
Author: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/144536.1648326206@sss.pgh.pa.us
Backpatch: 11-
DecodeDateTime and DecodeTimeOnly had support for date input in the
style "Y2023M03D16", which the comments claimed to be an "ISO" format.
However, so far as I can find there is no such format in ISO 8601;
they write units before numbers in intervals, but not in datetimes.
Furthermore, the lesser-known ISO 8601-2 spec actually defines an
incompatible format "2023Y03M16D". None of our documentation mentions
such a format either. So let's just drop it.
That leaves us with only two cases for a prefix unit specifier in
datetimes: Julian dates written as Jnnnn, and the "T" separator
defined by ISO 8601. Add checks to catch misuse of these specifiers,
that is consecutive specifiers or a dangling specifier at the end of
the string. We do not however disallow a specifier that is separated
from the field that it disambiguates (by noise words or unrelated
fields). That being the case, remove some overly-aggressive error
checks from the ISOTIME cases.
Joseph Koshakow, editorialized a bit by me; thanks also to
Peter Eisentraut for some standards-reading.
Discussion: https://postgr.es/m/CAAvxfHf2Q1gKLiHGnuPOiyf0ASvKUM4BnMfsXuwgtYEb_Gx0Zw@mail.gmail.com
The user receiving the message might not understand where the
server's "current directory" is. "Data directory" seems clearer.
(This would not be good for frontend code, but both of these
messages are only issued in the backend.)
Kyotaro Horiguchi
Discussion: https://postgr.es/m/20230316.111646.1564684434328830712.horikyota.ntt@gmail.com
This structure included only PgStat_FunctionCounts, and removing it
facilitates some upcoming refactoring for pgstatfuncs.c to use more
macros rather that mostly-duplicated functions.
Author: Bertrand Drouvot
Reviewed-by: Nathan Bossart
Discussion: https://postgr.es/m/11d531fe-52fc-c6ea-7e8e-62f1b6ec626e@gmail.com
This adds the ability to pretty-print XML documents ... according to
libxml's somewhat idiosyncratic notions of what's pretty, anyway.
One notable divergence from a strict reading of the spec is that
libxml is willing to collapse empty nodes "<node></node>" to just
"<node/>", whereas SQL and the underlying XML spec say that this
option should only result in whitespace tweaks. Nonetheless,
it seems close enough to justify using the SQL-standard syntax.
Jim Jones, reviewed by Peter Smith and myself
Discussion: https://postgr.es/m/2f5df461-dad8-6d7d-4568-08e10608a69b@uni-muenster.de
The band-aid applied in commit f0bedf3e4 turns out to still need
some work: it made sure we didn't set Np->last_relevant too small
(to the left of the decimal point), but it didn't prevent setting
it too large (off the end of the partially-converted string).
This could result in fetching data beyond the end of the allocated
space, which with very bad luck could cause a SIGSEGV, though
I don't see any hazard of interesting memory disclosure.
Per bug #17839 from Thiago Nunes. The bug's pretty ancient,
so back-patch to all supported versions.
Discussion: https://postgr.es/m/17839-aada50db24d7b0da@postgresql.org
Expose the standard error functions as SQL-callable functions. These
are expected to be useful to people working with normal distributions,
and we use them here to test the distribution from random_normal().
Since these functions are defined in the POSIX and C99 standards, they
should in theory be available on all supported platforms. If that
turns out not to be the case, more work will be needed.
On all platforms tested so far, using extra_float_digits = -1 in the
regression tests is sufficient to allow for variations between
implementations. However, past experience has shown that there are
almost certainly going to be additional unexpected portability issues,
so these tests may well need further adjustments, based on the
buildfarm results.
Dean Rasheed, reviewed by Nathan Bossart and Thomas Munro.
Discussion: https://postgr.es/m/CAEZATCXv5fi7+Vu-POiyai+ucF95+YMcCMafxV+eZuN1B-=MkQ@mail.gmail.com
The majority of error exit cases in json_lex_string() failed to
set lex->token_terminator, causing problems for the error context
reporting code: it would see token_terminator less than token_start
and do something more or less nuts. In v14 and up the end result
could be as bad as a crash in report_json_context(). Older
versions accidentally avoided that fate; but all versions produce
error context lines that are far less useful than intended,
because they'd stop at the end of the prior token instead of
continuing to where the actually-bad input is.
To fix, invent some macros that make it less notationally painful
to do the right thing. Also add documentation about what the
function is actually required to do; and in >= v14, add an assertion
in report_json_context about token_terminator being sufficiently
far advanced.
Per report from Nikolay Shaplov. Back-patch to all supported
versions.
Discussion: https://postgr.es/m/7332649.x5DLKWyVIX@thinkpad-pgpro
Datetime input formerly accepted combinations such as
'1995-08-06 infinity', but this seems like a clear error.
Reject any combination of regular y/m/d/h/m/s fields with
these special tokens.
Joseph Koshakow, reviewed by Keisuke Kuroda and myself
Discussion: https://postgr.es/m/CAAvxfHdm8wwXwG_FFRaJ1nTHiMWb7YXS2YKCzCt8Q0a2ZoMcHg@mail.gmail.com
Add support for non-decimal integer literals and underscores in
numeric literals to SQL JSON path language. This follows the rules of
ECMAScript, as referred to by the SQL standard.
Internally, all the numeric literal parsing of jsonpath goes through
numeric_in, which already supports all this, so this patch is just a
bit of lexer work and some tests and documentation.
Reviewed-by: Dean Rasheed <dean.a.rasheed@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/b11b25bb-6ec1-d42f-cedd-311eae59e1fb@enterprisedb.com
Open long-lived data and WAL file descriptors with O_CLOEXEC. This flag
was introduced by SUSv4 (POSIX.1-2008), and by now all of our target
Unix systems have it. Our open() implementation for Windows already had
that behavior, so provide a dummy O_CLOEXEC flag on that platform.
For now, callers of open() and the "thin" wrappers in fd.c that deal in
raw descriptors need to pass in O_CLOEXEC explicitly if desired. This
commit does that for WAL files, and automatically for everything
accessed via VFDs including SMgrRelation and BufFile. (With more
discussion we might decide to turn it on automatically for the thin
open()-wrappers too to avoid risk of missing places that need it, but
these are typically used for short-lived descriptors where we don't
expect to fork/exec, and it's remotely possible that extensions could be
using these APIs and passing descriptors to subprograms deliberately, so
that hasn't been done here.)
Do the same for sockets and the postmaster pipe with FD_CLOEXEC. (Later
commits might use modern interfaces to remove these extra fcntl() calls
and more where possible, but we'll need them as a fallback for a couple
of systems, so do it that way in this initial commit.)
With this change, subprograms executed for archiving, copying etc will
no longer have access to the server's descriptors, other than the ones
that we decide to pass down.
Reviewed-by: Andres Freund <andres@anarazel.de> (earlier version)
Discussion: https://postgr.es/m/CA%2BhUKGKb6FsAdQWcRL35KJsftv%2B9zXqQbzwkfRf1i0J2e57%2BhQ%40mail.gmail.com
This is usually harmless, but if you were very unlucky it could
provoke a segfault due to the "to" string being right up against
the end of memory. Found via valgrind testing (so we might've
found it earlier, except that our regression tests lacked any
exercise of translate()'s deletion feature).
Fix by switching the order of the test-for-end-of-string and
advance-pointer steps. While here, compute "to_ptr + tolen"
just once. (Smarter compilers might figure that out for
themselves, but let's just make sure.)
Report and fix by Daniil Anisimov, in bug #17816.
Discussion: https://postgr.es/m/17816-70f3d2764e88a108@postgresql.org
pg_input_error_info() is now a SQL function able to return a row with
more than just the error message generated for incorrect data type
inputs when these are able to handle soft failures, returning more
contents of ErrorData, as of:
- The error message (same as before).
- The error detail, if set.
- The error hint, if set.
- SQL error code.
All the regression tests that relied on pg_input_error_message() are
updated to reflect the effects of the rename.
Per discussion with Tom Lane and Andrew Dunstan.
Author: Nathan Bossart
Discussion: https://postgr.es/m/139a68e1-bd1f-a9a7-b5fe-0be9845c6311@dunslane.net
