The standby_slot_names GUC allows the specification of physical standby
slots that must be synchronized before the logical walsenders associated
with logical failover slots. However, for this purpose, the GUC name is
too generic.
Author: Hou Zhijie
Reviewed-by: Bertrand Drouvot, Masahiko Sawada
Backpatch-through: 17
Discussion: https://postgr.es/m/ZnWeUgdHong93fQN@momjian.us
As coded, an injection point could be loaded into the local cache
without the LWLock InjectionPointLock taken, hence a point detached and
re-attached concurrently of a point running calling InjectionPointRun()
may finish by loading a callback it did no set initially. Based on all
the cases discussed until now on the lists, it is fine to delay the lock
release until the callback is run, so let's do that.
While on it, remove a useless LWLockRelease() called before an error in
InjectionPointAttach().
Per discussion with Heikki Linnakangas and Noah Misch.
Discussion: https://postgr.es/m/e1ffb822-054e-4006-ac06-50532767f75b@iki.fi
They were under "File Locations", which doesn't make sense. Move them
to Resource Usage / Memory, which matches their categorization in the
source code and in the documentation.
After further review, we want to move in the direction of always
quoting GUC names in error messages, rather than the previous (PG16)
wildly mixed practice or the intermittent (mid-PG17) idea of doing
this depending on how possibly confusing the GUC name is.
This commit applies appropriate quotes to (almost?) all mentions of
GUC names in error messages. It partially supersedes a243569bf6 and
8d9978a717, which had moved things a bit in the opposite direction
but which then were abandoned in a partial state.
Author: Peter Smith <smithpb2250@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/CAHut%2BPv-kSN8SkxSdoHano_wPubqcg5789ejhCDZAcLFceBR-w%40mail.gmail.com
This commit extends the backend-side infrastructure of injection points
so as it becomes possible to register some input data when attaching a
point. This private data can be registered with the function name and
the library name of the callback when attaching a point, then it is
given as input argument to the callback. This gives the possibility for
modules to pass down custom data at runtime when attaching a point
without managing that internally, in a manner consistent with the
callback entry retrieved from the hash shmem table storing the injection
point data.
InjectionPointAttach() gains two arguments, to be able to define the
private data contents and its size.
A follow-up commit will rely on this infrastructure to close a race
condition with the injection point detach in the module
injection_points.
While on it, this changes InjectionPointDetach() to return a boolean,
returning false if a point cannot be detached. This has been mentioned
by Noah as useful when it comes to implement more complex tests with
concurrent point detach, solid with the automatic detach done for local
points in the test module.
Documentation is adjusted in consequence.
Per discussion with Noah Misch.
Reviewed-by: Noah Misch
Discussion: https://postgr.es/m/20240509031553.47@rfd.leadboat.com
The new "log_connection_negotiation" server option causes the server
to print messages to the log when it receives a SSLRequest or
GSSENCRequest packet from the client. Together with "log_connections",
it gives a trace of how a connection and encryption is
negotiatated. Use the option in the libpq_encryption test, to verify
in more detail how libpq negotiates encryption with different
gssencmode and sslmode options.
This revealed a couple of cases where libpq retries encryption or
authentication, when it should already know that it cannot succeed. I
marked them with XXX comments in the test tables. They only happen
when the connection was going to fail anyway, and only with rare
combinations of options, so they're not serious.
Discussion: https://www.postgresql.org/message-id/CAEze2Wja8VUoZygCepwUeiCrWa4jP316k0mvJrOW4PFmWP0Tcw@mail.gmail.com
Replace (expr op C1) OR (expr op C2) ... with expr op ANY(ARRAY[C1, C2, ...])
on the preliminary stage of optimization when we are still working with the
expression tree.
Here Cn is a n-th constant expression, 'expr' is non-constant expression, 'op'
is an operator which returns boolean result and has a commuter (for the case
of reverse order of constant and non-constant parts of the expression,
like 'Cn op expr').
Sometimes it can lead to not optimal plan. This is why there is a
or_to_any_transform_limit GUC. It specifies a threshold value of length of
arguments in an OR expression that triggers the OR-to-ANY transformation.
Generally, more groupable OR arguments mean that transformation will be more
likely to win than to lose.
Discussion: https://postgr.es/m/567ED6CA.2040504%40sigaev.ru
Author: Alena Rybakina <lena.ribackina@yandex.ru>
Author: Andrey Lepikhov <a.lepikhov@postgrespro.ru>
Reviewed-by: Peter Geoghegan <pg@bowt.ie>
Reviewed-by: Ranier Vilela <ranier.vf@gmail.com>
Reviewed-by: Alexander Korotkov <aekorotkov@gmail.com>
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Reviewed-by: Jian He <jian.universality@gmail.com>
The BAS_VACUUM ring size has been 256kB since commit d526575f introduced
the mechanism 17 years ago. Commit 1cbbee03 recently made it
configurable but retained the traditional default. The correct default
size has been debated for years, but 256kB is certainly very small.
VACUUM soon needs to write back data it dirtied only 32 blocks ago,
which usually requires flushing the WAL. New experiments in prefetching
pages for VACUUM exacerbated the problem by crashing into dirty data
even sooner. Let's make the default 2MB. That's 1.6% of the default
toy buffer pool size, and 0.2% of 1GB, which would be a considered a
small shared_buffers setting for a real system these days. Users are
still free to set the GUC to a different value.
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20240403221257.md4gfki3z75cdyf6%40awork3.anarazel.de
Discussion: https://postgr.es/m/CA%2BhUKGLY4Q4ZY4f1rvnFtv6%2BPkjNf8MejdPkcju3Qii9DYqqcQ%40mail.gmail.com
Break ReadBuffer() up into two steps. StartReadBuffers() and
WaitReadBuffers() give us two main advantages:
1. Multiple consecutive blocks can be read with one system call.
2. Advice (hints of future reads) can optionally be issued to the
kernel ahead of time.
The traditional ReadBuffer() function is now implemented in terms of
those functions, to avoid duplication.
A new GUC io_combine_limit is defined, and the functions for limiting
per-backend pin counts are made into public APIs. Those are provided
for use by callers of StartReadBuffers(), when deciding how many buffers
to read at once. The following commit will add a higher level mechanism
for doing that automatically with a practical interface.
With some more infrastructure in later work, StartReadBuffers() could
be extended to start real asynchronous I/O instead of just issuing
advice and leaving WaitReadBuffers() to do the work synchronously.
Author: Thomas Munro <thomas.munro@gmail.com>
Author: Andres Freund <andres@anarazel.de> (some optimization tweaks)
Reviewed-by: Melanie Plageman <melanieplageman@gmail.com>
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Reviewed-by: Nazir Bilal Yavuz <byavuz81@gmail.com>
Reviewed-by: Dilip Kumar <dilipbalaut@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Tested-by: Tomas Vondra <tomas.vondra@enterprisedb.com>
Discussion: https://postgr.es/m/CA+hUKGJkOiOCa+mag4BF+zHo7qo=o9CFheB8=g6uT5TUm2gkvA@mail.gmail.com
This is marked PGC_SIGHUP, so it can only be set in a configuration
file, not anywhere else; and it is also marked GUC_DISALLOW_IN_AUTO_FILE,
so it can't be set using ALTER SYSTEM. When set to false, the
ALTER SYSTEM command is disallowed.
There was considerable concern that this would be misinterpreted as
a security feature, which it is not, because a determined superuser
has various ways of bypassing it. Hence, a lot of work has gone into
wordsmithing the documentation, in the hopes of avoiding any such
confusion.
Jelte Fennemia-Nio and Gabriele Bartolini, with wording suggestions
for the documentation from many others.
Discussion: http://postgr.es/m/CA%2BVUV5rEKt2%2BCdC_KUaPoihMu%2Bi5ChT4WVNTr4CD5-xXZUfuQw%40mail.gmail.com
The user-facing name is "Other Platforms and Clients", but the
internal name seems too focused on clients specifically, especially
given the plan to add a new setting to this session that is about
platform or deployment model compatibility rather than client
compatibility.
Jelte Fennema-Nio
Discussion: http://postgr.es/m/CAGECzQTfMbDiM6W3av+3weSnHxJvPmuTEcjxVvSt91sQBdOxuQ@mail.gmail.com
The musl dynamic linker saves a pointer to the process' environment
value of LD_LIBRARY_PATH very early in startup. When we move/clobber
the environment to make more room for ps status strings, we clobber
that value and thereby prevent libraries from being found via
LD_LIBRARY_PATH, which breaks the use of a temporary installation
for testing purposes. To fix, stop collecting usable space for
ps status if we notice that the variable we are about to clobber
is LD_LIBRARY_PATH. This will result in some reduction in how long
the ps status can be, but it's only likely to occur in temporary
test contexts, so it doesn't seem like a big problem. In any case,
we don't have to do it if we see we are on glibc, which surely is
where the majority of our Linux testing is done.
Thomas Munro, Bruce Momjian, and Tom Lane, per report from Wolfgang
Walther. Back-patch to all supported branches, with the hope that
we'll set up a buildfarm animal to test on this platform.
Discussion: https://postgr.es/m/fddd1cd6-dc16-40a2-9eb5-d7fef2101488@technowledgy.de
This commit limits the maximum value of wal_summary_keep_time to
INT_MAX / SECS_PER_MINUTE to avoid overflow when it is converted to
seconds. In passing, use the HOURS_PER_DAY, MINS_PER_HOUR, and
SECS_PER_MINUTE macros in the code for this GUC instead of hard-
coding those values.
Discussion: https://postgr.es/m/20240314210010.GA3056455%40nathanxps13
Most callers of strerror() are removed from the backend code. The
remaining callers require special handling with a saved errno from a
previous system call. The frontend code still needs strerror() where
error states need to be handled outside of fprintf.
Note that pg_regress is not changed to use %m as the TAP output may
clobber errno, since those functions call fprintf() and friends before
evaluating the format string.
Support for %m in src/port/snprintf.c has been added in d6c55de1f9,
hence all the stable branches currently supported include it.
Author: Dagfinn Ilmari Mannsåker
Discussion: https://postgr.es/m/87sf13jhuw.fsf@wibble.ilmari.org
This patch provides a way to ensure that physical standbys that are
potential failover candidates have received and flushed changes before
the primary server making them visible to subscribers. Doing so guarantees
that the promoted standby server is not lagging behind the subscribers
when a failover is necessary.
The logical walsender now guarantees that all local changes are sent and
flushed to the standby servers corresponding to the replication slots
specified in 'standby_slot_names' before sending those changes to the
subscriber.
Additionally, the SQL functions pg_logical_slot_get_changes,
pg_logical_slot_peek_changes and pg_replication_slot_advance are modified
to ensure that they process changes for failover slots only after physical
slots specified in 'standby_slot_names' have confirmed WAL receipt for those.
Author: Hou Zhijie and Shveta Malik
Reviewed-by: Masahiko Sawada, Peter Smith, Bertrand Drouvot, Ajin Cherian, Nisha Moond, Amit Kapila
Discussion: https://postgr.es/m/514f6f2f-6833-4539-39f1-96cd1e011f23@enterprisedb.com
Use GUC_ACTION_SAVE rather than GUC_ACTION_SET, necessary for working
with parallel query.
Now that the call requires more arguments, wrap the call in a new
function to avoid code duplication and offer a place for a comment.
Discussion: https://postgr.es/m/E1rhJpO-0027Wf-9L@gemulon.postgresql.org
as determined by include-what-you-use (IWYU)
While IWYU also suggests to *add* a bunch of #include's (which is its
main purpose), this patch does not do that. In some cases, a more
specific #include replaces another less specific one.
Some manual adjustments of the automatic result:
- IWYU currently doesn't know about includes that provide global
variable declarations (like -Wmissing-variable-declarations), so
those includes are being kept manually.
- All includes for port(ability) headers are being kept for now, to
play it safe.
- No changes of catalog/pg_foo.h to catalog/pg_foo_d.h, to keep the
patch from exploding in size.
Note that this patch touches just *.c files, so nothing declared in
header files changes in hidden ways.
As a small example, in src/backend/access/transam/rmgr.c, some IWYU
pragma annotations are added to handle a special case there.
Discussion: https://www.postgresql.org/message-id/flat/af837490-6b2f-46df-ba05-37ea6a6653fc%40eisentraut.org
More precisely, what we do here is make the SLRU cache sizes
configurable with new GUCs, so that sites with high concurrency and big
ranges of transactions in flight (resp. multixacts/subtransactions) can
benefit from bigger caches. In order for this to work with good
performance, two additional changes are made:
1. the cache is divided in "banks" (to borrow terminology from CPU
caches), and algorithms such as eviction buffer search only affect
one specific bank. This forestalls the problem that linear searching
for a specific buffer across the whole cache takes too long: we only
have to search the specific bank, whose size is small. This work is
authored by Andrey Borodin.
2. Change the locking regime for the SLRU banks, so that each bank uses
a separate LWLock. This allows for increased scalability. This work
is authored by Dilip Kumar. (A part of this was previously committed as
d172b717c6f4.)
Special care is taken so that the algorithms that can potentially
traverse more than one bank release one bank's lock before acquiring the
next. This should happen rarely, but particularly clog.c's group commit
feature needed code adjustment to cope with this. I (Álvaro) also added
lots of comments to make sure the design is sound.
The new GUCs match the names introduced by bcdfa5f2e2 in the
pg_stat_slru view.
The default values for these parameters are similar to the previous
sizes of each SLRU. commit_ts, clog and subtrans accept value 0, which
means to adjust by dividing shared_buffers by 512 (so 2MB for every 1GB
of shared_buffers), with a cap of 8MB. (A new slru.c function
SimpleLruAutotuneBuffers() was added to support this.) The cap was
previously 1MB for clog, so for sites with more than 512MB of shared
memory the total memory used increases, which is likely a good tradeoff.
However, other SLRUs (notably multixact ones) retain smaller sizes and
don't support a configured value of 0. These values based on
shared_buffers may need to be revisited, but that's an easy change.
There was some resistance to adding these new GUCs: it would be better
to adjust to memory pressure automatically somehow, for example by
stealing memory from shared_buffers (where the caches can grow and
shrink naturally). However, doing that seems to be a much larger
project and one which has made virtually no progress in several years,
and because this is such a pain point for so many users, here we take
the pragmatic approach.
Author: Andrey Borodin <x4mmm@yandex-team.ru>
Author: Dilip Kumar <dilipbalaut@gmail.com>
Reviewed-by: Amul Sul, Gilles Darold, Anastasia Lubennikova,
Ivan Lazarev, Robert Haas, Thomas Munro, Tomas Vondra,
Yura Sokolov, Васильев Дмитрий (Dmitry Vasiliev).
Discussion: https://postgr.es/m/2BEC2B3F-9B61-4C1D-9FB5-5FAB0F05EF86@yandex-team.ru
Discussion: https://postgr.es/m/CAFiTN-vzDvNz=ExGXz6gdyjtzGixKSqs0mKHMmaQ8sOSEFZ33A@mail.gmail.com
There isn't a lot of user demand for AIX support, we have a bunch of
hacks to work around AIX-specific compiler bugs and idiosyncrasies,
and no one has stepped up to the plate to properly maintain it.
Remove support for AIX to get rid of that maintenance overhead. It's
still supported for stable versions.
The acute issue that triggered this decision was that after commit
8af2565248, the AIX buildfarm members have been hitting this
assertion:
TRAP: failed Assert("(uintptr_t) buffer == TYPEALIGN(PG_IO_ALIGN_SIZE, buffer)"), File: "md.c", Line: 472, PID: 2949728
Apperently the "pg_attribute_aligned(a)" attribute doesn't work on AIX
for values larger than PG_IO_ALIGN_SIZE, for a static const variable.
That could be worked around, but we decided to just drop the AIX support
instead.
Discussion: https://www.postgresql.org/message-id/20240224172345.32@rfd.leadboat.com
Reviewed-by: Andres Freund, Noah Misch, Thomas Munro
This is in the same spirit as ef5e2e9085, updating this time some
arrays in parser.c, relpath.c, guc_tables.c and pg_dump_sort.c so as the
order of their elements has no need to match the enum structures they
are based on anymore.
Author: Jelte Fennema-Nio
Reviewed-by: Jian He, Japin Li
Discussion: https://postgr.es/m/CAGECzQT3caUbcCcszNewCCmMbCuyP7XNAm60J3ybd6PN5kH2Dw@mail.gmail.com
By enabling slot synchronization, all the failover logical replication
slots on the primary (assuming configurations are appropriate) are
automatically created on the physical standbys and are synced
periodically. The slot sync worker on the standby server pings the primary
server at regular intervals to get the necessary failover logical slots
information and create/update the slots locally. The slots that no longer
require synchronization are automatically dropped by the worker.
The nap time of the worker is tuned according to the activity on the
primary. The slot sync worker waits for some time before the next
synchronization, with the duration varying based on whether any slots were
updated during the last cycle.
A new parameter sync_replication_slots enables or disables this new
process.
On promotion, the slot sync worker is shut down by the startup process to
drop any temporary slots acquired by the slot sync worker and to prevent
the worker from trying to fetch the failover slots.
A functionality to allow logical walsenders to wait for the physical will
be done in a subsequent commit.
Author: Shveta Malik, Hou Zhijie based on design inputs by Masahiko Sawada and Amit Kapila
Reviewed-by: Masahiko Sawada, Bertrand Drouvot, Peter Smith, Dilip Kumar, Ajin Cherian, Nisha Moond, Kuroda Hayato, Amit Kapila
Discussion: https://postgr.es/m/514f6f2f-6833-4539-39f1-96cd1e011f23@enterprisedb.com
Presently, we rely on each individual signal handler to save the
initial value of errno and then restore it before returning if
needed. This is easily forgotten and, if missed, often goes
undetected for a long time.
In commit 3b00fdba9f, we introduced a wrapper signal handler
function that checks whether MyProcPid matches getpid(). This
commit moves the aforementioned errno restoration code from the
individual signal handlers to the new wrapper handler so that we no
longer need to worry about missing it.
Reviewed-by: Andres Freund, Noah Misch
Discussion: https://postgr.es/m/20231121212008.GA3742740%40nathanxps13
This commit fixes an error message that failed to show the correct
function and library names when a function cannot be loaded.
While on it, adjust the call to load_external_function() so as this
ERROR can be reached, by making load_external_function() return NULL
rather than fail if a function cannot be found for a given injection
point.
Thinkos in d86d20f0ba.
1. The memcpy()s in InjectionPointAttach() would copy garbage from
beyond the end of input string to the buffer in shared memory. You
won't usually notice, but if there is not enough valid mapped memory
beyond the end of the string, the read of unmapped memory will
segfault. This was flagged by the Cirrus CI build with address
sanitizer enabled.
2. The memcpy() in injection_point_cache_add() failed to copy the NULL
terminator.
Discussion: https://www.postgresql.org/message-id/0615a424-b726-4157-afa7-4245629f9512%40iki.fi
Injection points are a new facility that makes possible for developers
to run custom code in pre-defined code paths. Its goal is to provide
ways to design and run advanced tests, for cases like:
- Race conditions, where processes need to do actions in a controlled
ordered manner.
- Forcing a state, like an ERROR, FATAL or even PANIC for OOM, to force
recovery, etc.
- Arbitrary sleeps.
This implements some basics, and there are plans to extend it more in
the future depending on what's required. Hence, this commit adds a set
of routines in the backend that allows developers to attach, detach and
run injection points:
- A code path calling an injection point can be declared with the macro
INJECTION_POINT(name).
- InjectionPointAttach() and InjectionPointDetach() to respectively
attach and detach a callback to/from an injection point. An injection
point name is registered in a shmem hash table with a library name and a
function name, which will be used to load the callback attached to an
injection point when its code path is run.
Injection point names are just strings, so as an injection point can be
declared and run by out-of-core extensions and modules, with callbacks
defined in external libraries.
This facility is hidden behind a dedicated switch for ./configure and
meson, disabled by default.
Note that backends use a local cache to store callbacks already loaded,
cleaning up their cache if a callback has found to be removed on a
best-effort basis. This could be refined further but any tests but what
we have here was fine with the tests I've written while implementing
these backend APIs.
Author: Michael Paquier, with doc suggestions from Ashutosh Bapat.
Reviewed-by: Ashutosh Bapat, Nathan Bossart, Álvaro Herrera, Dilip
Kumar, Amul Sul, Nazir Bilal Yavuz
Discussion: https://postgr.es/m/ZTiV8tn_MIb_H2rE@paquier.xyz
When evaluating a query with a multi-column GROUP BY clause, we can minimize
sort operations or avoid them if we synchronize the order of GROUP BY clauses
with the ORDER BY sort clause or sort order, which comes from the underlying
query tree. Grouping does not imply any ordering, so we can compare
the keys in arbitrary order, and a Hash Agg leverages this. But for Group Agg,
we simply compared keys in the order specified in the query. This commit
explores alternative ordering of the keys, trying to find a cheaper one.
The ordering of group keys may interact with other parts of the query, some of
which may not be known while planning the grouping. For example, there may be
an explicit ORDER BY clause or some other ordering-dependent operation higher up
in the query, and using the same ordering may allow using either incremental
sort or even eliminating the sort entirely.
The patch always keeps the ordering specified in the query, assuming the user
might have additional insights.
This introduces a new GUC enable_group_by_reordering so that the optimization
may be disabled if needed.
Discussion: https://postgr.es/m/7c79e6a5-8597-74e8-0671-1c39d124c9d6%40sigaev.ru
Author: Andrei Lepikhov, Teodor Sigaev
Reviewed-by: Tomas Vondra, Claudio Freire, Gavin Flower, Dmitry Dolgov
Reviewed-by: Robert Haas, Pavel Borisov, David Rowley, Zhihong Yu
Reviewed-by: Tom Lane, Alexander Korotkov, Richard Guo, Alena Rybakina
In commit 3e51b278d I (tgl) caused initdb to leave lc_messages and
other lc_xxx GUCs commented-out in the installed postgresql.conf file
if they were going to be set to 'C'. This was a hack for cosmetic
purposes, and it was buggy because lc_messages' wired-in default is
not 'C' but '' (empty string). That led to --no-locale not having
the expected effect, since the postmaster would then obtain
lc_messages from its startup environment.
Let's just revert to the prior behavior of always de-commenting the
lc_xxx entries; the argument for changing that longstanding behavior
was weak in the first place.
Also, fix postgresql.conf.sample's erroneous claim that the default
value of lc_messages is 'C'. I suspect that was what misled me into
making this mistake in the first place.
Report and patch by Kyotaro Horiguchi. Back-patch to v16 where
the problem was introduced.
Discussion: https://postgr.es/m/20231122.162700.1995154567625541112.horikyota.ntt@gmail.com
When enabled (default off), this logs a backtrace anytime elog() or an
equivalent ereport() for internal errors is called.
This is not well covered by the existing backtrace_functions, because
there are many equally-worded low-level errors in many functions. And
if you find out where the error is, then you need to manually rewrite
the elog() to ereport() to attach the errbacktrace(), which is
annoying. Having a backtrace automatically on every elog() call could
be very helpful during development for various kinds of common errors
from palloc, syscache, node support, etc.
Discussion: https://www.postgresql.org/message-id/flat/ba76c6bc-f03f-4285-bf16-47759cfcab9e@eisentraut.org
set_config_option() bails out early if it detects that the option to
be set is PGC_BACKEND or PGC_SU_BACKEND class and we're reading the
config file in a postmaster child; we don't want to apply any new
value in such a case. That's fine as far as it goes, but it fails
to consider the requirements of the pg_file_settings view: for that,
we need to check validity of the value even though we have no
intention to apply it. Because we didn't, even very silly values
for affected GUCs would be reported as valid by the view. There
are only half a dozen such GUCs, which perhaps explains why this
got overlooked for so long.
Fix by continuing when changeVal is false; this parallels the logic
in some other early-exit paths.
Also, the check added by commit 924bcf4f1 to prevent GUC changes in
parallel workers seems a few bricks shy of a load: it's evidently
assuming that ereport(elevel, ...) won't return. Make sure we
bail out if it does. The lack of trouble reports suggests that
this is only a latent bug, i.e. parallel workers don't actually
reach here with elevel < ERROR. (Per the code coverage report,
we never reach here at all in the regression suite.) But we clearly
don't want to risk proceeding if that does happen.
Per report from Rıdvan Korkmaz. These are ancient bugs, so back-patch
to all supported branches.
Discussion: https://postgr.es/m/2089235.1703617353@sss.pgh.pa.us
When active, this process writes WAL summary files to
$PGDATA/pg_wal/summaries. Each summary file contains information for a
certain range of LSNs on a certain TLI. For each relation, it stores a
"limit block" which is 0 if a relation is created or destroyed within
a certain range of WAL records, or otherwise the shortest length to
which the relation was truncated during that range of WAL records, or
otherwise InvalidBlockNumber. In addition, it stores a list of blocks
which have been modified during that range of WAL records, but
excluding blocks which were removed by truncation after they were
modified and never subsequently modified again.
In other words, it tells us which blocks need to copied in case of an
incremental backup covering that range of WAL records. But this
doesn't yet add the capability to actually perform an incremental
backup; the next patch will do that.
A new parameter summarize_wal enables or disables this new background
process. The background process also automatically deletes summary
files that are older than wal_summarize_keep_time, if that parameter
has a non-zero value and the summarizer is configured to run.
Patch by me, with some design help from Dilip Kumar and Andres Freund.
Reviewed by Matthias van de Meent, Dilip Kumar, Jakub Wartak, Peter
Eisentraut, and Álvaro Herrera.
Discussion: http://postgr.es/m/CA+TgmoYOYZfMCyOXFyC-P+-mdrZqm5pP2N7S-r0z3_402h9rsA@mail.gmail.com
This GUC was intended as a debugging help in the 9.0 area when hot
standby and streaming replication were being developped, able to offer
more information at LOG level rather than DEBUGn. There are more tools
available these days that are able to offer rather equivalent
information, like pg_waldump introduced in 9.3. It is not obvious how
this facility is useful these days, so let's remove it.
Author: Bharath Rupireddy
Discussion: https://postgr.es/m/ZXEXEAUVFrvpquSd@paquier.xyz
Quotes are applied to GUCs in a very inconsistent way across the code
base, with a mix of double quotes or no quotes used. This commit
removes double quotes around all the GUC names that are obviously
referred to as parameters with non-English words (use of underscore,
mixed case, etc).
This is the result of a discussion with Álvaro Herrera, Nathan Bossart,
Laurenz Albe, Peter Eisentraut, Tom Lane and Daniel Gustafsson.
Author: Peter Smith
Discussion: https://postgr.es/m/CAHut+Pv-kSN8SkxSdoHano_wPubqcg5789ejhCDZAcLFceBR-w@mail.gmail.com
