Don't move parenthesized lines to the left, even if that means they
flow past the right margin.
By default, BSD indent lines up statement continuation lines that are
within parentheses so that they start just to the right of the preceding
left parenthesis. However, traditionally, if that resulted in the
continuation line extending to the right of the desired right margin,
then indent would push it left just far enough to not overrun the margin,
if it could do so without making the continuation line start to the left of
the current statement indent. That makes for a weird mix of indentations
unless one has been completely rigid about never violating the 80-column
limit.
This behavior has been pretty universally panned by Postgres developers.
Hence, disable it with indent's new -lpl switch, so that parenthesized
lines are always lined up with the preceding left paren.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
Change pg_bsd_indent to follow upstream rules for placement of comments
to the right of code, and remove pgindent hack that caused comments
following #endif to not obey the general rule.
Commit e3860ffa4d wasn't actually using
the published version of pg_bsd_indent, but a hacked-up version that
tried to minimize the amount of movement of comments to the right of
code. The situation of interest is where such a comment has to be
moved to the right of its default placement at column 33 because there's
code there. BSD indent has always moved right in units of tab stops
in such cases --- but in the previous incarnation, indent was working
in 8-space tab stops, while now it knows we use 4-space tabs. So the
net result is that in about half the cases, such comments are placed
one tab stop left of before. This is better all around: it leaves
more room on the line for comment text, and it means that in such
cases the comment uniformly starts at the next 4-space tab stop after
the code, rather than sometimes one and sometimes two tabs after.
Also, ensure that comments following #endif are indented the same
as comments following other preprocessor commands such as #else.
That inconsistency turns out to have been self-inflicted damage
from a poorly-thought-through post-indent "fixup" in pgindent.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
The new indent version includes numerous fixes thanks to Piotr Stefaniak.
The main changes visible in this commit are:
* Nicer formatting of function-pointer declarations.
* No longer unexpectedly removes spaces in expressions using casts,
sizeof, or offsetof.
* No longer wants to add a space in "struct structname *varname", as
well as some similar cases for const- or volatile-qualified pointers.
* Declarations using PG_USED_FOR_ASSERTS_ONLY are formatted more nicely.
* Fixes bug where comments following declarations were sometimes placed
with no space separating them from the code.
* Fixes some odd decisions for comments following case labels.
* Fixes some cases where comments following code were indented to less
than the expected column 33.
On the less good side, it now tends to put more whitespace around typedef
names that are not listed in typedefs.list. This might encourage us to
put more effort into typedef name collection; it's not really a bug in
indent itself.
There are more changes coming after this round, having to do with comment
indentation and alignment of lines appearing within parentheses. I wanted
to limit the size of the diffs to something that could be reviewed without
one's eyes completely glazing over, so it seemed better to split up the
changes as much as practical.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
Per discussion, "location" is a rather vague term that could refer to
multiple concepts. "LSN" is an unambiguous term for WAL locations and
should be preferred. Some function names, view column names, and function
output argument names used "lsn" already, but others used "location",
as well as yet other terms such as "wal_position". Since we've already
renamed a lot of things in this area from "xlog" to "wal" for v10,
we may as well incur a bit more compatibility pain and make these names
all consistent.
David Rowley, minor additional docs hacking by me
Discussion: https://postgr.es/m/CAKJS1f8O0njDKe8ePFQ-LK5-EjwThsDws6ohJ-+c6nWK+oUxtg@mail.gmail.com
Storing passwords in plaintext hasn't been a good idea for a very long
time, if ever. Now seems like a good time to finally forbid it, since we're
messing with this in PostgreSQL 10 anyway.
Remove the CREATE/ALTER USER UNENCRYPTED PASSSWORD 'foo' syntax, since
storing passwords unencrypted is no longer supported. ENCRYPTED PASSWORD
'foo' is still accepted, but ENCRYPTED is now just a noise-word, it does
the same as just PASSWORD 'foo'.
Likewise, remove the --unencrypted option from createuser, but accept
--encrypted as a no-op for backward compatibility. AFAICS, --encrypted was
a no-op even before this patch, because createuser encrypted the password
before sending it to the server even if --encrypted was not specified. It
added the ENCRYPTED keyword to the SQL command, but since the password was
already in encrypted form, it didn't make any difference. The documentation
was not clear on whether that was intended or not, but it's moot now.
Also, while password_encryption='on' is still accepted as an alias for
'md5', it is now marked as hidden, so that it is not listed as an accepted
value in error hints, for example. That's not directly related to removing
'plain', but it seems better this way.
Reviewed by Michael Paquier
Discussion: https://www.postgresql.org/message-id/16e9b768-fd78-0b12-cfc1-7b6b7f238fde@iki.fi
This goes together with the changes made to enable replication on the
sending side by default (wal_level, max_wal_senders etc) by making the
receiving stadby node also enable it by default.
Huong Dangminh
Per discussion, plain "scram" is confusing because we actually implement
SCRAM-SHA-256 rather than the original SCRAM that uses SHA-1 as the hash
algorithm. If we add support for SCRAM-SHA-512 or some other mechanism in
the SCRAM family in the future, that would become even more confusing.
Most of the internal files and functions still use just "scram" as a
shorthand for SCRMA-SHA-256, but I did change PASSWORD_TYPE_SCRAM to
PASSWORD_TYPE_SCRAM_SHA_256, as that could potentially be used by 3rd
party extensions that hook into the password-check hook.
Michael Paquier did this in an earlier version of the SCRAM patch set
already, but I didn't include that in the version that was committed.
Discussion: https://www.postgresql.org/message-id/fde71ff1-5858-90c8-99a9-1c2427e7bafb@iki.fi
To prevent future bugs along the lines of the one corrected by commit
8ff518699f, or find any that remain
in the current code, add an Assert() that the difference between
parallel_register_count and parallel_terminate_count is in a sane
range.
Kuntal Ghosh, with considerable tidying-up by me, per a suggestion
from Neha Khatri. Reviewed by Tomas Vondra.
Discussion: http://postgr.es/m/CAFO0U+-E8yzchwVnvn5BeRDPgX2z9vZUxQ8dxx9c0XFGBC7N1Q@mail.gmail.com
This commit also does
- add REPLICATION_SUBSCRIBERS into config_group
- mark max_logical_replication_workers and max_sync_workers_per_subscription
as REPLICATION_SUBSCRIBERS parameters
- move those parameters into "Subscribers" section in postgresql.conf.sample
Author: Masahiko Sawada, Petr Jelinek and me
Reported-by: Masahiko Sawada
Discussion: http://postgr.es/m/CAD21AoAonSCoa=v=87ZO3vhfUZA1k_E2XRNHTt=xioWGUa+0ug@mail.gmail.com
This extends the castNode() notation introduced by commit 5bcab1114 to
provide, in one step, extraction of a list cell's pointer and coercion to
a concrete node type. For example, "lfirst_node(Foo, lc)" is the same
as "castNode(Foo, lfirst(lc))". Almost half of the uses of castNode
that have appeared so far include a list extraction call, so this is
pretty widely useful, and it saves a few more keystrokes compared to the
old way.
As with the previous patch, back-patch the addition of these macros to
pg_list.h, so that the notation will be available when back-patching.
Patch by me, after an idea of Andrew Gierth's.
Discussion: https://postgr.es/m/14197.1491841216@sss.pgh.pa.us
Defaults match the fixed behavior of prior releases, but now DBAs
have better options to tune serializable workloads.
It might be nice to be able to set this per relation, but that part
will need to wait for another release.
Author: Dagfinn Ilmari Mannsåker
Previously they were defined using multiples of XLogSegSize.
Remove GUC_UNIT_XSEGS. Introduce GUC_UNIT_MB
Extracted from patch series on XLogSegSize infrastructure.
Beena Emerson
A QueryEnvironment concept is added, which allows new types of
objects to be passed into queries from parsing on through
execution. At this point, the only thing implemented is a
collection of EphemeralNamedRelation objects -- relations which
can be referenced by name in queries, but do not exist in the
catalogs. The only type of ENR implemented is NamedTuplestore, but
provision is made to add more types fairly easily.
An ENR can carry its own TupleDesc or reference a relation in the
catalogs by relid.
Although these features can be used without SPI, convenience
functions are added to SPI so that ENRs can easily be used by code
run through SPI.
The initial use of all this is going to be transition tables in
AFTER triggers, but that will be added to each PL as a separate
commit.
An incidental effect of this patch is to produce a more informative
error message if an attempt is made to modify the contents of a CTE
from a referencing DML statement. No tests previously covered that
possibility, so one is added.
Kevin Grittner and Thomas Munro
Reviewed by Heikki Linnakangas, David Fetter, and Thomas Munro
with valuable comments and suggestions from many others
Three nologin roles with non-overlapping privs are created by default
* pg_read_all_settings - read all GUCs.
* pg_read_all_stats - pg_stat_*, pg_database_size(), pg_tablespace_size()
* pg_stat_scan_tables - may lock/scan tables
Top level role - pg_monitor includes all of the above by default, plus others
Author: Dave Page
Reviewed-by: Stephen Frost, Robert Haas, Peter Eisentraut, Simon Riggs
The previous default 'pg_log' might have indicated by its "pg_" prefix
that it is an internal system directory. The new default is more in
line with the typical naming of directories with user-facing log files.
Together with the renaming of pg_clog and pg_xlog, this should clear up
that difference.
Author: Andreas Karlsson <andreas@proxel.se>
Add functionality for a new subscription to copy the initial data in the
tables and then sync with the ongoing apply process.
For the copying, add a new internal COPY option to have the COPY source
data provided by a callback function. The initial data copy works on
the subscriber by receiving COPY data from the publisher and then
providing it locally into a COPY that writes to the destination table.
A WAL receiver can now execute full SQL commands. This is used here to
obtain information about tables and publications.
Several new options were added to CREATE and ALTER SUBSCRIPTION to
control whether and when initial table syncing happens.
Change pg_dump option --no-create-subscription-slots to
--no-subscription-connect and use the new CREATE SUBSCRIPTION
... NOCONNECT option for that.
Author: Petr Jelinek <petr.jelinek@2ndquadrant.com>
Tested-by: Erik Rijkers <er@xs4all.nl>
This makes almost all core code follow the policy introduced in the
previous commit. Specific decisions:
- Text search support functions with char* and length arguments, such as
prsstart and lexize, may receive unaligned strings. I doubt
maintainers of non-core text search code will notice.
- Use plain VARDATA() on values detoasted or synthesized earlier in the
same function. Use VARDATA_ANY() on varlenas sourced outside the
function, even if they happen to always have four-byte headers. As an
exception, retain the universal practice of using VARDATA() on return
values of SendFunctionCall().
- Retain PG_GETARG_BYTEA_P() in pageinspect. (Page images are too large
for a one-byte header, so this misses no optimization.) Sites that do
not call get_page_from_raw() typically need the four-byte alignment.
- For now, do not change btree_gist. Its use of four-byte headers in
memory is partly entangled with storage of 4-byte headers inside
GBT_VARKEY, on disk.
- For now, do not change gtrgm_consistent() or gtrgm_distance(). They
incorporate the varlena header into a cache, and there are multiple
credible implementation strategies to consider.
Like Gather, we spawn multiple workers and run the same plan in each
one; however, Gather Merge is used when each worker produces the same
output ordering and we want to preserve that output ordering while
merging together the streams of tuples from various workers. (In a
way, Gather Merge is like a hybrid of Gather and MergeAppend.)
This works out to a win if it saves us from having to perform an
expensive Sort. In cases where only a small amount of data would need
to be sorted, it may actually be faster to use a regular Gather node
and then sort the results afterward, because Gather Merge sometimes
needs to wait synchronously for tuples whereas a pure Gather generally
doesn't. But if this avoids an expensive sort then it's a win.
Rushabh Lathia, reviewed and tested by Amit Kapila, Thomas Munro,
and Neha Sharma, and reviewed and revised by me.
Discussion: http://postgr.es/m/CAGPqQf09oPX-cQRpBKS0Gq49Z+m6KBxgxd_p9gX8CKk_d75HoQ@mail.gmail.com
This introduces a new generic SASL authentication method, similar to the
GSS and SSPI methods. The server first tells the client which SASL
authentication mechanism to use, and then the mechanism-specific SASL
messages are exchanged in AuthenticationSASLcontinue and PasswordMessage
messages. Only SCRAM-SHA-256 is supported at the moment, but this allows
adding more SASL mechanisms in the future, without changing the overall
protocol.
Support for channel binding, aka SCRAM-SHA-256-PLUS is left for later.
The SASLPrep algorithm, for pre-processing the password, is not yet
implemented. That could cause trouble, if you use a password with
non-ASCII characters, and a client library that does implement SASLprep.
That will hopefully be added later.
Authorization identities, as specified in the SCRAM-SHA-256 specification,
are ignored. SET SESSION AUTHORIZATION provides more or less the same
functionality, anyway.
If a user doesn't exist, perform a "mock" authentication, by constructing
an authentic-looking challenge on the fly. The challenge is derived from
a new system-wide random value, "mock authentication nonce", which is
created at initdb, and stored in the control file. We go through these
motions, in order to not give away the information on whether the user
exists, to unauthenticated users.
Bumps PG_CONTROL_VERSION, because of the new field in control file.
Patch by Michael Paquier and Heikki Linnakangas, reviewed at different
stages by Robert Haas, Stephen Frost, David Steele, Aleksander Alekseev,
and many others.
Discussion: https://www.postgresql.org/message-id/CAB7nPqRbR3GmFYdedCAhzukfKrgBLTLtMvENOmPrVWREsZkF8g%40mail.gmail.com
Discussion: https://www.postgresql.org/message-id/CAB7nPqSMXU35g%3DW9X74HVeQp0uvgJxvYOuA4A-A3M%2B0wfEBv-w%40mail.gmail.com
Discussion: https://www.postgresql.org/message-id/55192AFE.6080106@iki.fi
We don't need it any more.
pg_controldata continues to report that date/time type storage is
"64-bit integers", but that's now a hard-wired behavior not something
it sees in the data. This avoids breaking pg_upgrade, and perhaps other
utilities that inspect pg_control this way. Ditto for pg_resetwal.
I chose to remove the "bigint_timestamps" output column of
pg_control_init(), though, as that function hasn't been around long
and probably doesn't have ossified users.
Discussion: https://postgr.es/m/26788.1487455319@sss.pgh.pa.us
When min_parallel_relation_size was added, the only supported type
of parallel scan was a parallel sequential scan, but there are
pending patches for parallel index scan, parallel index-only scan,
and parallel bitmap heap scan. Those patches introduce two new
types of complications: first, what's relevant is not really the
total size of the relation but the portion of it that we will scan;
and second, index pages and heap pages shouldn't necessarily be
treated in exactly the same way. Typically, the number of index
pages will be quite small, but that doesn't necessarily mean that
a parallel index scan can't pay off.
Therefore, we introduce min_parallel_table_scan_size, which works
out a degree of parallelism for scans based on the number of table
pages that will be scanned (and which is therefore equivalent to
min_parallel_relation_size for parallel sequential scans) and also
min_parallel_index_scan_size which can be used to work out a degree
of parallelism based on the number of index pages that will be
scanned.
Amit Kapila and Robert Haas
Discussion: http://postgr.es/m/CAA4eK1KowGSYYVpd2qPpaPPA5R90r++QwDFbrRECTE9H_HvpOg@mail.gmail.com
Discussion: http://postgr.es/m/CAA4eK1+TnM4pXQbvn7OXqam+k_HZqb0ROZUMxOiL6DWJYCyYow@mail.gmail.com
When the new GUC wal_consistency_checking is set to a non-empty value,
it triggers recording of additional full-page images, which are
compared on the standby against the results of applying the WAL record
(without regard to those full-page images). Allowable differences
such as hints are masked out, and the resulting pages are compared;
any difference results in a FATAL error on the standby.
Kuntal Ghosh, based on earlier patches by Michael Paquier and Heikki
Linnakangas. Extensively reviewed and revised by Michael Paquier and
by me, with additional reviews and comments from Amit Kapila, Álvaro
Herrera, Simon Riggs, and Peter Eisentraut.
There is no particularly good reason to limit this value to 1000,
so increase the limit to INT_MAX / 2, the same limit we use for
shared_buffers. It's not clear how much practical effect larger
settings will have, but there seems no harm in letting people try it.
Jim Nasby, less a comment change I stripped out.
Discussion: http://postgr.es/m/f6e58a22-030b-eb8a-5457-f62fb08d701c@BlueTreble.com
This is useful infrastructure for an upcoming proposed patch to
allow the WAL segment size to be changed at initdb time; tools like
pg_basebackup need the ability to interrogate the server setting.
But it also doesn't seem like a bad thing to have independently of
that; it may find other uses in the future.
Robert Haas and Beena Emerson. (The original patch here was by
Beena, but I rewrote it to such a degree that most of the code
being committed here is mine.)
Discussion: http://postgr.es/m/CA+TgmobNo4qz06wHEmy9DszAre3dYx-WNhHSCbU9SAwf+9Ft6g@mail.gmail.com
This changes the default values of the following parameters:
wal_level = replica
max_wal_senders = 10
max_replication_slots = 10
in order to make it possible to make a backup and set up simple
replication on the default settings, without requiring a system restart.
Discussion: https://postgr.es/m/CABUevEy4PR_EAvZEzsbF5s+V0eEvw7shJ2t-AUwbHOjT+yRb3A@mail.gmail.com
Reviewed by Peter Eisentraut. Benchmark help from Tomas Vondra.
It is no longer necessary to restart the server to enable, disable,
or reconfigure SSL. Instead, we just create a new SSL_CTX struct
(by re-reading all relevant files) whenever we get SIGHUP. Testing
shows that this is fast enough that it shouldn't be a problem.
In conjunction with that, downgrade the logic that complains about
pg_hba.conf "hostssl" lines when SSL isn't active: now that's just
a warning condition not an error.
An issue that still needs to be addressed is what shall we do with
passphrase-protected server keys? As this stands, the server would
demand the passphrase again on every SIGHUP, which is certainly
impractical. But the case was only barely supported before, so that
does not seem a sufficient reason to hold up committing this patch.
Andreas Karlsson, reviewed by Michael Banck and Michael Paquier
Discussion: https://postgr.es/m/556A6E8A.9030400@proxel.se
This feature is also known as "quorum commit" especially in discussion
on pgsql-hackers.
This commit adds the following new syntaxes into synchronous_standby_names
GUC. By using FIRST and ANY keywords, users can specify the method to
choose synchronous standbys from the listed servers.
FIRST num_sync (standby_name [, ...])
ANY num_sync (standby_name [, ...])
The keyword FIRST specifies a priority-based synchronous replication
which was available also in 9.6 or before. This method makes transaction
commits wait until their WAL records are replicated to num_sync
synchronous standbys chosen based on their priorities.
The keyword ANY specifies a quorum-based synchronous replication
and makes transaction commits wait until their WAL records are
replicated to *at least* num_sync listed standbys. In this method,
the values of sync_state.pg_stat_replication for the listed standbys
are reported as "quorum". The priority is still assigned to each standby,
but not used in this method.
The existing syntaxes having neither FIRST nor ANY keyword are still
supported. They are the same as new syntax with FIRST keyword, i.e.,
a priorirty-based synchronous replication.
Author: Masahiko Sawada
Reviewed-By: Michael Paquier, Amit Kapila and me
Discussion: <CAD21AoAACi9NeC_ecm+Vahm+MMA6nYh=Kqs3KB3np+MBOS_gZg@mail.gmail.com>
Many thanks to the various individuals who were involved in
discussing and developing this feature.
Commit b460f5d669 -- at my suggestion --
increased the default value of max_worker_processes from 8 to 16, on
the theory that this would be harmless and convenient for users.
Unfortunately, this caused some buildfarm machines with low connection
limits to start failing, so apparently it's not harmless after all.
This adds a new routine, pg_strong_random() for generating random bytes,
for use in both frontend and backend. At the moment, it's only used in
the backend, but the upcoming SCRAM authentication patches need strong
random numbers in libpq as well.
pg_strong_random() is based on, and replaces, the existing implementation
in pgcrypto. It can acquire strong random numbers from a number of sources,
depending on what's available:
- OpenSSL RAND_bytes(), if built with OpenSSL
- On Windows, the native cryptographic functions are used
- /dev/urandom
Unlike the current pgcrypto function, the source is chosen by configure.
That makes it easier to test different implementations, and ensures that
we don't accidentally fall back to a less secure implementation, if the
primary source fails. All of those methods are quite reliable, it would be
pretty surprising for them to fail, so we'd rather find out by failing
hard.
If no strong random source is available, we fall back to using erand48(),
seeded from current timestamp, like PostmasterRandom() was. That isn't
cryptographically secure, but allows us to still work on platforms that
don't have any of the above stronger sources. Because it's not very secure,
the built-in implementation is only used if explicitly requested with
--disable-strong-random.
This replaces the more complicated Fortuna algorithm we used to have in
pgcrypto, which is unfortunate, but all modern platforms have /dev/urandom,
so it doesn't seem worth the maintenance effort to keep that. pgcrypto
functions that require strong random numbers will be disabled with
--disable-strong-random.
Original patch by Magnus Hagander, tons of further work by Michael Paquier
and me.
Discussion: https://www.postgresql.org/message-id/CAB7nPqRy3krN8quR9XujMVVHYtXJ0_60nqgVc6oUk8ygyVkZsA@mail.gmail.com
Discussion: https://www.postgresql.org/message-id/CAB7nPqRWkNYRRPJA7-cF+LfroYV10pvjdz6GNvxk-Eee9FypKA@mail.gmail.com
Increase the default value of the existing max_worker_processes GUC
from 8 to 16, and add a new max_parallel_workers GUC with a maximum
of 8. This way, even if the maximum amount of parallel query is
happening, there is still room for background workers that do other
things, as originally envisioned when max_worker_processes was added.
Julien Rouhaud, reviewed by Amit Kapila and by revised by me.
Instead of confusingly stating platform-dependent defaults for these
parameters in the comments in postgresql.conf.sample (with the main
entry being a lie on Linux), teach initdb to install the correct
platform-dependent value in postgresql.conf, similarly to the way
we handle other platform-dependent defaults. This won't do anything
for existing 9.6 installations, but since it's effectively only a
documentation improvement, that seems OK.
Since this requires initdb to have access to the default values,
move the #define's for those to pg_config_manual.h; the original
placement in bufmgr.h is unworkable because that file can't be
included by frontend programs.
Adjust the default value for wal_writer_flush_after so that it is 1MB
regardless of XLOG_BLCKSZ, conforming to what is stated in both the
SGML docs and postgresql.conf. (We could alternatively make it scale
with XLOG_BLCKSZ, but I'm not sure I see the point.)
Copy-edit related SGML documentation.
Fabien Coelho and Tom Lane, per a gripe from Tomas Vondra.
Discussion: <30ebc6e3-8358-09cf-44a8-578252938424@2ndquadrant.com>
The serialization code dumped core for a string-valued GUC whose value
is NULL, which is a legal state. The infrastructure isn't capable of
transmitting that state exactly, but fortunately, transmitting an empty
string instead should be close enough (compare, eg, commit e45e990e4).
The code potentially underestimated the space required to format a
real-valued variable, both because it made an unwarranted assumption that
%g output would never be longer than %e output, and because it didn't count
right even for %e format. In practice this would pretty much always be
masked by overestimates for other variables, but it's still wrong.
Also fix boundary-case error in read_gucstate, incorrect handling of the
case where guc_sourcefile is non-NULL but zero length (not clear that can
happen, but if it did, this code would get totally confused), and
confusingly useless check for a NULL result from read_gucstate.
Andreas Seltenreich discovered the core dump; other issues noted while
reading nearby code. Back-patch to 9.5 where this code was introduced.
Michael Paquier and Tom Lane
Discussion: <871sy78wno.fsf@credativ.de>
The intent of the test is to check whether XLOG_SEG_SIZE is in a
particular range, but actually in one case it compares XLOG_BLCKSZ
by mistake. Repair.
Commit 88e9823026 introduced this
faulty test.
Kuntal Ghosh, reviewed by Michael Paquier.
