detect case that next page in log came from an older run than the prior
page. This avoids the necessity to re-zero the log after recovery from
a crash, which is good because we need not risk destroying valuable log
information.
This forces another initdb since yesterday :-(. Need to get that log
reset utility done...
* Store two past checkpoint locations, not just one, in pg_control.
On startup, we fall back to the older checkpoint if the newer one
is unreadable. Also, a physical copy of the newest checkpoint record
is kept in pg_control for possible use in disaster recovery (ie,
complete loss of pg_xlog). Also add a version number for pg_control
itself. Remove archdir from pg_control; it ought to be a GUC
parameter, not a special case (not that it's implemented yet anyway).
* Suppress successive checkpoint records when nothing has been entered
in the WAL log since the last one. This is not so much to avoid I/O
as to make it actually useful to keep track of the last two
checkpoints. If the things are right next to each other then there's
not a lot of redundancy gained...
* Change CRC scheme to a true 64-bit CRC, not a pair of 32-bit CRCs
on alternate bytes. Polynomial borrowed from ECMA DLT1 standard.
* Fix XLOG record length handling so that it will work at BLCKSZ = 32k.
* Change XID allocation to work more like OID allocation. (This is of
dubious necessity, but I think it's a good idea anyway.)
* Fix a number of minor bugs, such as off-by-one logic for XLOG file
wraparound at the 4 gig mark.
* Add documentation and clean up some coding infelicities; move file
format declarations out to include files where planned contrib
utilities can get at them.
* Checkpoint will now occur every CHECKPOINT_SEGMENTS log segments or
every CHECKPOINT_TIMEOUT seconds, whichever comes first. It is also
possible to force a checkpoint by sending SIGUSR1 to the postmaster
(undocumented feature...)
* Defend against kill -9 postmaster by storing shmem block's key and ID
in postmaster.pid lockfile, and checking at startup to ensure that no
processes are still connected to old shmem block (if it still exists).
* Switch backends to accept SIGQUIT rather than SIGUSR1 for emergency
stop, for symmetry with postmaster and xlog utilities. Clean up signal
handling in bootstrap.c so that xlog utilities launched by postmaster
will react to signals better.
* Standalone bootstrap now grabs lockfile in target directory, as added
insurance against running it in parallel with live postmaster.
tuples inserted/deleted/updated in a single transaction. On my machine,
this reduced the time to delete 80000 tuples in a foreign-key-referencing
table from ~15min to ~8sec.
of a counted input string. Marinos Yannikos' recent crash report turns
out to be due to applying pg_ascii2wchar_with_len to a TEXT object that
is smack up against the end of memory. This is the second just-barely-
reproducible bug report I have seen that traces to some bit of code
fetching one more byte than it is allowed to. Let's be more careful
out there, boys and girls.
While at it, I changed the code to not risk a similar crash when there
is a truncated multibyte character at the end of an input string. The
output in this case might not be the most reasonable output possible;
if anyone wants to improve it further, step right up...
succeeds or not. Revise rtree page split algorithm to take care about
making a feasible split --- ie, will the incoming tuple actually fit?
Failure to make a feasible split, combined with failure to notice the
failure, account for Jim Stone's recent bug report. I suspect that
hash and gist indices may have the same type of bug, but at least now
we'll get error messages rather than silent failures if so. Also clean
up rtree code to use Datum rather than char* where appropriate.
when user does another FETCH after reaching end of data, or another
FETCH backwards after reaching start. This is needed because some plan
nodes are not very robust about being called again after they've already
returned NULL; for example, MergeJoin will crash in some states but not
others. While the ideal approach would be for them all to handle this
correctly, it seems foolish to assume that no such bugs would creep in
again once cleaned up. Therefore, the most robust answer is to prevent
the situation from arising at all.
vacuum analyze on pg_type fails if bogus entries remain in pg_operator.
Here is a sample script to reproduce the problem.
drop table t1;
create table t1(i int);
drop function foo(t1,t1);
create function foo(t1,t1) returns bool as 'select true' language 'sql';
create operator = (
leftarg = t1,
rightarg = t1,
commutator = =,
procedure = foo
);
drop table t1;
vacuum analyze;
only if at least N other backends currently have open transactions. This
is not a great deal of intelligence about whether a delay might be
profitable ... but it beats no intelligence at all. Note that the default
COMMIT_DELAY is still zero --- this new code does nothing unless that
setting is changed.
Also, mark ENABLEFSYNC as a system-wide setting. It's no longer safe to
allow that to be set per-backend, since we may be relying on some other
backend's fsync to have synced the WAL log.
does not lead to a one-second delay, but to an immediate EINVAL failure.
This causes CHECKPOINT to crash with s_lock_stuck much too quickly :-(.
Fix by breaking down the requested wait div/mod 1e6.
> Is there one LOCKMETHODCTL for every backend? I thought there was only
> one of them.
>>
>> You're right, that line is erroneous; it should read
>>
>> size += MAX_LOCK_METHODS * MAXALIGN(sizeof(LOCKMETHODCTL));
>>
>> Not a significant error but it should be changed for clarity ...
in Turkish locale. Keywords are now checked under pure ASCII case-folding
rules ('A'-'Z'->'a'-'z' and nothing else). However, once a word is
determined not to be a keyword, it will be case-folded under the current
locale, same as before. See pghackers discussion 20-Feb-01.
waste of cycles on single-CPU machines, and of dubious utility on multi-CPU
machines too.
Tweak s_lock_stuck so that caller can specify timeout interval, and
increase interval before declaring stuck spinlock for buffer locks and XLOG
locks.
On systems that have fdatasync(), use that rather than fsync() to sync WAL
log writes. Ensure that WAL file is entirely allocated during XLogFileInit.
either wrong or unnecessary in most cases, and on systems where setting
status takes a kernel call, the overhead of setting status three times
per command rather than two is annoying.
1. If there is exactly one pg_operator entry of the right name and oprkind,
oper() and related routines would return that entry whether its input type
had anything to do with the request or not. This is just premature
optimization: we shouldn't return the single candidate until after we verify
that it really is a valid candidate, ie, is at least coercion-compatible
with the given types.
2. oper() and related routines only promise a coercion-compatible result.
Unfortunately, there were quite a few callers that assumed the returned
operator is binary-compatible with the given datatype; they would proceed
to call it without making any datatype coercions. These callers include
sorting, grouping, aggregation, and VACUUM ANALYZE. In general I think
it is appropriate for these callers to require an exact or binary-compatible
match, so I've added a new routine compatible_oper() that only succeeds if
it can find an operator that doesn't require any run-time conversions.
Callers now call oper() or compatible_oper() depending on whether they are
prepared to deal with type conversion or not.
The upshot of these bugs is revealed by the following silliness in PL/Tcl's
selftest: it creates an operator @< on int4, and then tries to use it to
sort a char(N) column. The system would let it do that :-( (and evidently
has done so since 6.3 :-( :-(). The result in this case was just a silly
sort order, but the reverse combination would've provoked coredump from
trying to dereference integers. With this fix you get more reasonable
behavior:
pltcl_test=# select * from T_pkey1 order by key1, key2 using @<;
ERROR: Unable to identify an operator '@<' for types 'bpchar' and 'bpchar'
You will have to retype this query using an explicit cast
compressed storage works perfectly well. Might as well have a coherent
strategy for applying it, rather than the haphazard store-what-you-get
approach that was in the code before. The strategy I've set up here is
to attempt compression of any compressible index value exceeding
BLCKSZ/16, or about 500 bytes by default.
the old ones were not small enough to ensure r-tree and gist indexes would
get picked when available. These numbers are totally bogus anyway, but
in the absence of any real estimation technique, we'd like to select
indexes when available ...
such as
SELECT f1 FROM foo UNION SELECT ... ORDER BY upper(f1)
to draw
'ORDER BY on a UNION/INTERSECT/EXCEPT result must be on one of the result columns'
rather than the uninformative 'f1 not found' we were producing before.
Eventually this should actually work, but that looks much too hard to try
to implement in late beta...
