A test has been added to ensure that conflict-relevant data is not
prematurely removed when a concurrent prepared transaction is being
committed on the publisher.
This test introduces an injection point that simulates the presence of a
prepared transaction in the commit phase, validating that the system
correctly delays conflict slot advancement until the transaction is fully
committed.
Additionally, the test serves as a safeguard for developers, ensuring that
the acquisition of the commit timestamp does not occur before marking
DELAY_CHKPT_IN_COMMIT in RecordTransactionCommitPrepared.
Reported-by: Robert Haas <robertmhaas@gmail.com>
Author: Zhijie Hou <houzj.fnst@fujitsu.com>
Reviewed-by: shveta malik <shveta.malik@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Discussion: https://postgr.es/m/OS9PR01MB16913F67856B0DA2A909788129400A@OS9PR01MB16913.jpnprd01.prod.outlook.com
This commit fixes three issues:
1) When a disabled subscription is created with retain_dead_tuples set to true,
the launcher is not woken up immediately, which may lead to delays in creating
the conflict detection slot.
Creating the conflict detection slot is essential even when the subscription is
not enabled. This ensures that dead tuples are retained, which is necessary for
accurately identifying the type of conflict during replication.
2) Conflict-related data was unnecessarily retained when the subscription does
not have a table.
3) Conflict-relevant data could be prematurely removed before applying
prepared transactions on the publisher that are in the commit critical section.
This issue occurred because the backend executing COMMIT PREPARED was not
accounted for during the computation of oldestXid in the commit phase on
the publisher. As a result, the subscriber could advance the conflict
slot's xmin without waiting for such COMMIT PREPARED transactions to
complete.
We fixed this issue by identifying prepared transactions that are in the
commit critical section during computation of oldestXid in commit phase.
Author: Zhijie Hou <houzj.fnst@fujitsu.com>
Reviewed-by: shveta malik <shveta.malik@gmail.com>
Reviewed-by: Dilip Kumar <dilipbalaut@gmail.com>
Reviewed-by: Nisha Moond <nisha.moond412@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Discussion: https://postgr.es/m/OS9PR01MB16913DACB64E5721872AA5C02943BA@OS9PR01MB16913.jpnprd01.prod.outlook.com
Discussion: https://postgr.es/m/OS9PR01MB16913F67856B0DA2A909788129400A@OS9PR01MB16913.jpnprd01.prod.outlook.com
Logical replication requires reliable conflict detection to maintain data
consistency across nodes. To achieve this, we must prevent premature
removal of tuples deleted by other origins and their associated commit_ts
data by VACUUM, which could otherwise lead to incorrect conflict reporting
and resolution.
This patch introduces a mechanism to retain deleted tuples on the
subscriber during the application of concurrent transactions from remote
nodes. Retaining these tuples allows us to correctly ignore concurrent
updates to the same tuple. Without this, an UPDATE might be misinterpreted
as an INSERT during resolutions due to the absence of the original tuple.
Additionally, we ensure that origin metadata is not prematurely removed by
vacuum freeze, which is essential for detecting update_origin_differs and
delete_origin_differs conflicts.
To support this, a new replication slot named pg_conflict_detection is
created and maintained by the launcher on the subscriber. Each apply
worker tracks its own non-removable transaction ID, which the launcher
aggregates to determine the appropriate xmin for the slot, thereby
retaining necessary tuples.
Conflict information retention (deleted tuples and commit_ts) can be
enabled per subscription via the retain_conflict_info option. This is
disabled by default to avoid unnecessary overhead for configurations that
do not require conflict resolution or logging.
During upgrades, if any subscription on the old cluster has
retain_conflict_info enabled, a conflict detection slot will be created to
protect relevant tuples from deletion when the new cluster starts.
This is a foundational work to correctly detect update_deleted conflict
which will be done in a follow-up patch.
Author: Zhijie Hou <houzj.fnst@fujitsu.com>
Reviewed-by: shveta malik <shveta.malik@gmail.com>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-by: Dilip Kumar <dilipbalaut@gmail.com>
Reviewed-by: Nisha Moond <nisha.moond412@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Discussion: https://postgr.es/m/OS0PR01MB5716BE80DAEB0EE2A6A5D1F5949D2@OS0PR01MB5716.jpnprd01.prod.outlook.com
This commit standardizes the output format for LSNs to ensure consistent
representation across various tools and messages. Previously, LSNs were
inconsistently printed as `%X/%X` in some contexts, while others used
zero-padding. This often led to confusion when comparing.
To address this, the LSN format is now uniformly set to `%X/%08X`,
ensuring the lower 32-bit part is always zero-padded to eight
hexadecimal digits.
Author: Japin Li <japinli@hotmail.com>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-by: Álvaro Herrera <alvherre@kurilemu.de>
Discussion: https://postgr.es/m/ME0P300MB0445CA53CA0E4B8C1879AF84B641A@ME0P300MB0445.AUSP300.PROD.OUTLOOK.COM
This refactoring is a follow-up of the work done in 5a1dfde833, that
has switched 2PC file names to use FullTransactionIds when written on
disk. This will help with the integration of a follow-up solution
related to the handling of two-phase files during recovery, to address
older defects while reading these from disk after a crash.
This change is useful in itself as it reduces the need to build the
file names from epoch numbers and TransactionIds, because we can use
directly FullTransactionIds from which the 2PC file names are guessed.
So this avoids a lot of back-and-forth between the FullTransactionIds
retrieved from the file names and how these are passed around in the
internal 2PC logic.
Note that the core of the change is the use of a FullTransactionId
instead of a TransactionId in GlobalTransactionData, that tracks 2PC
file information in shared memory. The change in TwoPhaseCallback makes
this commit unfit for stable branches.
Noah has contributed a good chunk of this patch. I have spent some time
on it as well while working on the issues with two-phase state files and
recovery.
Author: Noah Misch <noah@leadboat.com>
Co-Authored-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/Z5sd5O9JO7NYNK-C@paquier.xyz
Discussion: https://postgr.es/m/20250116205254.65.nmisch@google.com
This commit reverts 8f67f994e8 (down to v13) and c3de0f9eed (down to
v17), as these are proving to not be completely correct regarding two
aspects:
- In v17 and newer branches, c3de0f9eed38's check for epoch handling is
incorrect, and does not correctly handle frozen epochs. A logic closer
to widen_snapshot_xid() should be used. The 2PC code should try to
integrate deeper with FullTransactionIds, 5a1dfde833 being not enough.
- In v13 and newer branches, 8f67f994e8 is a workaround for the real
issue, which is that we should not attempt CLOG lookups without reaching
consistency. This exists since 728bd991c3, and this is reachable with
ProcessTwoPhaseBuffer() called by restoreTwoPhaseData() at the beginning
of recovery.
Per discussion with Noah Misch.
Discussion: https://postgr.es/m/20250116010051.f3.nmisch@google.com
Backpatch-through: 13
At the beginning of recovery, an orphaned two-phase file in an epoch
different than the one defined in the checkpoint record could not be
removed based on the assumptions that AdjustToFullTransactionId() relies
on, assuming that all files would be either from the current epoch or
from the previous epoch.
If the checkpoint epoch was 0 while the 2PC file was orphaned and in the
future, AdjustToFullTransactionId() would underflow the epoch used to
build the 2PC file path. In non-assert builds, this would create a
WARNING message referring to a 2PC file with an epoch of "FFFFFFFF" (or
UINT32_MAX), as an effect of the underflow calculation, leaving the
orphaned file around.
Some tests are added with dummy 2PC files in the past and the future,
checking that these are properly removed.
Issue introduced by 5a1dfde833, that has switched two-phase state
files to use FullTransactionIds.
Reported-by: Vitaly Davydov
Author: Michael Paquier
Reviewed-by: Vitaly Davydov
Discussion: https://postgr.es/m/13b5b6-676c3080-4d-531db900@47931709
Backpatch-through: 17
Before 728bd991c3, that has improved the support for 2PC files during
recovery, the initial logic scanning files in pg_twophase was done so as
files in the future of the transaction ID horizon were checked first,
followed by a check if a transaction ID is aborted or committed which
could involve a pg_xact lookup. After this commit, these checks have
been done in reverse order.
Files detected as in the future do not have a state that can be checked
in pg_xact, hence this caused recovery to fail abruptly should an
orphaned 2PC file in the future of the transaction ID horizon exist in
pg_twophase at the beginning of recovery.
A test is added to check for this scenario, using an empty 2PC with a
transaction ID large enough to be in the future when running the test.
This test is added in 16 and older versions for now. 17 and newer
versions are impacted by a second bug caused by the addition of the
epoch in the 2PC file names. An equivalent test will be added in these
branches in a follow-up commit, once the second set of issues reported
are fixed.
Author: Vitaly Davydov, Michael Paquier
Discussion: https://postgr.es/m/11e597-676ab680-8d-374f23c0@145466129
Backpatch-through: 13
Commit 34486b609 effectively redefined isBackgroundWorker as meaning
"not a regular backend", whereas before it had the narrower
meaning of AmBackgroundWorkerProcess(). For clarity, rename the
field to isRegularBackend and invert its sense.
Discussion: https://postgr.es/m/1808397.1735156190@sss.pgh.pa.us
Cause parallel workers to not check datallowconn, rolcanlogin, and
ACL_CONNECT privileges. The leader already checked these things
(except for rolcanlogin which might have been checked for a different
role). Re-checking can accomplish little except to induce unexpected
failures in applications that might not even be aware that their query
has been parallelized. We already had the principle that parallel
workers rely on their leader to pass a valid set of authorization
information, so this change just extends that a bit further.
Also, modify the ReservedConnections, datconnlimit and rolconnlimit
logic so that these limits are only enforced against regular backends,
and only regular backends are counted while checking if the limits
were already reached. Previously, background processes that had an
assigned database or role were subject to these limits (with rather
random exclusions for autovac workers and walsenders), and the set of
existing processes that counted against each limit was quite haphazard
as well. The point of these limits, AFAICS, is to ensure the
availability of PGPROC slots for regular backends. Since all other
types of processes have their own separate pools of PGPROC slots, it
makes no sense either to enforce these limits against them or to count
them while enforcing the limit.
While edge-case failures of these sorts have been possible for a
long time, the problem got a good deal worse with commit 5a2fed911
(CVE-2024-10978), which caused parallel workers to make some of these
checks using the leader's current role where before we had used its
AuthenticatedUserId, thus allowing parallel queries to fail after
SET ROLE. The previous behavior was fairly accidental and I have
no desire to return to it.
This patch includes reverting 73c9f91a1, which was an emergency hack
to suppress these same checks in some cases. It wasn't complete,
as shown by a recent bug report from Laurenz Albe. We can also revert
fd4d93d26 and 492217301, which hacked around the same problems in one
regression test.
In passing, remove the special case for autovac workers in
CheckMyDatabase; it seems cleaner to have AutoVacWorkerMain pass
the INIT_PG_OVERRIDE_ALLOW_CONNS flag, now that that does what's
needed.
Like 5a2fed911, back-patch to supported branches (which sadly no
longer includes v12).
Discussion: https://postgr.es/m/1808397.1735156190@sss.pgh.pa.us
COMMIT PREPARED removes on-disk 2PC files near its end, but the state
checked if a file is on-disk or not gets read from shared memory while
not holding the two-phase state lock.
Because of that, there was a small window where a second backend doing a
PREPARE TRANSACTION could reuse the GlobalTransaction put back into the
2PC free list by the COMMIT PREPARED, overwriting the "ondisk" flag read
afterwards by the COMMIT PREPARED to decide if its on-disk two-phase
state file should be removed, preventing the file deletion.
This commit fixes this issue so as the "ondisk" flag in the
GlobalTransaction is read while holding the two-phase state lock, not
from shared memory after its entry has been added to the free list.
Orphaned two-phase state files flushed to disk after a checkpoint are
discarded at the beginning of recovery. However, a truncation of
pg_xact/ would make the startup process issue a FATAL when it cannot
read the SLRU page holding the state of the transaction whose 2PC file
was orphaned, which is a necessary step to decide if the 2PC file should
be removed or not. Removing manually the file would be necessary in
this case.
Issue introduced by effe7d9552, so backpatch all the way down.
Mea culpa.
Author: wuchengwen
Discussion: https://postgr.es/m/tencent_A7F059B5136A359625C7B2E4A386B3C3F007@qq.com
Backpatch-through: 12
The two_phase option is controlled by both the publisher (as a slot
option) and the subscriber (as a subscription option), so the slot option
must also be modified.
Changing the 'two_phase' option for a subscription from 'true' to 'false'
is permitted only when there are no pending prepared transactions
corresponding to that subscription. Otherwise, the changes of already
prepared transactions can be replicated again along with their corresponding
commit leading to duplicate data or errors.
To avoid data loss, the 'two_phase' option for a subscription can only be
changed from 'false' to 'true' once the initial data synchronization is
completed. Therefore this is performed later by the logical replication worker.
Author: Hayato Kuroda, Ajin Cherian, Amit Kapila
Reviewed-by: Peter Smith, Hou Zhijie, Amit Kapila, Vitaly Davydov, Vignesh C
Discussion: https://postgr.es/m/8fab8-65d74c80-1-2f28e880@39088166
We did not recover the subtransaction IDs of prepared transactions
when starting a hot standby from a shutdown checkpoint. As a result,
such subtransactions were considered as aborted, rather than
in-progress. That would lead to hint bits being set incorrectly, and
the subtransactions suddenly becoming visible to old snapshots when
the prepared transaction was committed.
To fix, update pg_subtrans with prepared transactions's subxids when
starting hot standby from a shutdown checkpoint. The snapshots taken
from that state need to be marked as "suboverflowed", so that we also
check the pg_subtrans.
Backport to all supported versions.
Discussion: https://www.postgresql.org/message-id/6b852e98-2d49-4ca1-9e95-db419a2696e0@iki.fi
After further review, we want to move in the direction of always
quoting GUC names in error messages, rather than the previous (PG16)
wildly mixed practice or the intermittent (mid-PG17) idea of doing
this depending on how possibly confusing the GUC name is.
This commit applies appropriate quotes to (almost?) all mentions of
GUC names in error messages. It partially supersedes a243569bf6 and
8d9978a717, which had moved things a bit in the opposite direction
but which then were abandoned in a partial state.
Author: Peter Smith <smithpb2250@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/CAHut%2BPv-kSN8SkxSdoHano_wPubqcg5789ejhCDZAcLFceBR-w%40mail.gmail.com
as determined by include-what-you-use (IWYU)
While IWYU also suggests to *add* a bunch of #include's (which is its
main purpose), this patch does not do that. In some cases, a more
specific #include replaces another less specific one.
Some manual adjustments of the automatic result:
- IWYU currently doesn't know about includes that provide global
variable declarations (like -Wmissing-variable-declarations), so
those includes are being kept manually.
- All includes for port(ability) headers are being kept for now, to
play it safe.
- No changes of catalog/pg_foo.h to catalog/pg_foo_d.h, to keep the
patch from exploding in size.
Note that this patch touches just *.c files, so nothing declared in
header files changes in hidden ways.
As a small example, in src/backend/access/transam/rmgr.c, some IWYU
pragma annotations are added to handle a special case there.
Discussion: https://www.postgresql.org/message-id/flat/af837490-6b2f-46df-ba05-37ea6a6653fc%40eisentraut.org
Now that BackendId was just another index into the proc array, it was
redundant with the 0-based proc numbers used in other places. Replace
all usage of backend IDs with proc numbers.
The only place where the term "backend id" remains is in a few pgstat
functions that expose backend IDs at the SQL level. Those IDs are now
in fact 0-based ProcNumbers too, but the documentation still calls
them "backend ids". That term still seems appropriate to describe what
the numbers are, so I let it be.
One user-visible effect is that pg_temp_0 is now a valid temp schema
name, for backend with ProcNumber 0.
Reviewed-by: Andres Freund
Discussion: https://www.postgresql.org/message-id/8171f1aa-496f-46a6-afc3-c46fe7a9b407@iki.fi
Previously, backend ID was an index into the ProcState array, in the
shared cache invalidation manager (sinvaladt.c). The entry in the
ProcState array was reserved at backend startup by scanning the array
for a free entry, and that was also when the backend got its backend
ID. Things become slightly simpler if we redefine backend ID to be the
index into the PGPROC array, and directly use it also as an index to
the ProcState array. This uses a little more memory, as we reserve a
few extra slots in the ProcState array for aux processes that don't
need them, but the simplicity is worth it.
Aux processes now also have a backend ID. This simplifies the
reservation of BackendStatusArray and ProcSignal slots.
You can now convert a backend ID into an index into the PGPROC array
simply by subtracting 1. We still use 0-based "pgprocnos" in various
places, for indexes into the PGPROC array, but the only difference now
is that backend IDs start at 1 while pgprocnos start at 0. (The next
commmit will get rid of the term "backend ID" altogether and make
everything 0-based.)
There is still a 'backendId' field in PGPROC, now part of 'vxid' which
encapsulates the backend ID and local transaction ID together. It's
needed for prepared xacts. For regular backends, the backendId is
always equal to pgprocno + 1, but for prepared xact PGPROC entries,
it's the ID of the original backend that processed the transaction.
Reviewed-by: Andres Freund, Reid Thompson
Discussion: https://www.postgresql.org/message-id/8171f1aa-496f-46a6-afc3-c46fe7a9b407@iki.fi
Switch from using TransactionId to FullTransactionId in naming of 2PC files.
Transaction state file in the pg_twophase directory now have extra 8 bytes in
the name to address an epoch of a given xid.
Author: Maxim Orlov, Aleksander Alekseev, Alexander Korotkov, Teodor Sigaev
Author: Nikita Glukhov, Pavel Borisov, Yura Sokolov
Reviewed-by: Jacob Champion, Heikki Linnakangas, Alexander Korotkov
Reviewed-by: Japin Li, Pavel Borisov, Tom Lane, Peter Eisentraut, Andres Freund
Reviewed-by: Andrey Borodin, Dilip Kumar, Aleksander Alekseev
Discussion: https://postgr.es/m/CACG%3DezZe1NQSCnfHOr78AtAZxJZeCvxrts0ygrxYwe%3DpyyjVWA%40mail.gmail.com
Discussion: https://postgr.es/m/CAJ7c6TPDOYBYrnCAeyndkBktO0WG2xSdYduTF0nxq%2BvfkmTF5Q%40mail.gmail.com
This has been missed in cb0cca1, noticed before buildfarm member koel
has been able to complain while poking at a different patch. Like the
other commit, backpatch all the way down to limit the odds of merge
conflicts.
Backpatch-through: 11
A crash in the middle of a checkpoint with some two-phase state data
already flushed to disk by this checkpoint could cause a follow-up crash
recovery to recover twice the same transaction, once from what has been
found in pg_twophase/ at the beginning of recovery and a second time
when replaying its corresponding record.
This would lead to FATAL failures in the startup process during
recovery, where the same transaction would have a state recovered twice
instead of once:
LOG: recovering prepared transaction 731 from shared memory
LOG: recovering prepared transaction 731 from shared memory
FATAL: lock ExclusiveLock on object 731/0/0 is already held
This issue is fixed by skipping the addition of any 2PC state coming
from a record whose equivalent 2PC state file has already been loaded in
TwoPhaseState at the beginning of recovery by restoreTwoPhaseData(),
which is OK as long as the system has not reached a consistent state.
The timing to get a messed up recovery processing is very racy, and
would very unlikely happen. The thread that has reported the issue has
demonstrated the bug using injection points to force a PANIC in the
middle of a checkpoint.
Issue introduced in 728bd99, so backpatch all the way down.
Reported-by: "suyu.cmj" <mengjuan.cmj@alibaba-inc.com>
Author: "suyu.cmj" <mengjuan.cmj@alibaba-inc.com>
Author: Michael Paquier
Discussion: https://postgr.es/m/109e6994-b971-48cb-84f6-829646f18b4c.mengjuan.cmj@alibaba-inc.com
Backpatch-through: 11
Until now LWLockDequeueSelf() sequentially searched the list of waiters to see
if the current proc is still is on the list of waiters, or has already been
removed. In extreme workloads, where the wait lists are very long, this leads
to a quadratic behavior. #backends iterating over a list #backends
long. Additionally, the likelihood of needing to call LWLockDequeueSelf() in
the first place also increases with the increased length of the wait queue, as
it becomes more likely that a lock is released while waiting for the wait list
lock, which is held for longer during lock release.
Due to the exponential back-off in perform_spin_delay() this is surprisingly
hard to detect. We should make that easier, e.g. by adding a wait event around
the pg_usleep() - but that's a separate patch.
The fix is simple - track whether a proc is currently waiting in the wait list
or already removed but waiting to be woken up in PGPROC->lwWaiting.
In some workloads with a lot of clients contending for a small number of
lwlocks (e.g. WALWriteLock), the fix can substantially increase throughput.
As the quadratic behavior arguably is a bug, we might want to decide to
backpatch this fix in the future.
Author: Andres Freund <andres@anarazel.de>
Reviewed-by: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Discussion: https://postgr.es/m/20221027165914.2hofzp4cvutj6gin@awork3.anarazel.de
Discussion: https://postgr.es/m/CALj2ACXktNbG=K8Xi7PSqbofTZozavhaxjatVc14iYaLu4Maag@mail.gmail.com
This replaces all MemSet() calls with struct initialization where that
is easily and obviously possible. (For example, some cases have to
worry about padding bits, so I left those.)
(The same could be done with appropriate memset() calls, but this
patch is part of an effort to phase out MemSet(), so it doesn't touch
memset() calls.)
Reviewed-by: Ranier Vilela <ranier.vf@gmail.com>
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://www.postgresql.org/message-id/9847b13c-b785-f4e2-75c3-12ec77a3b05c@enterprisedb.com
We have been using the term RelFileNode to refer to either (1) the
integer that is used to name the sequence of files for a certain relation
within the directory set aside for that tablespace/database combination;
or (2) that value plus the OIDs of the tablespace and database; or
occasionally (3) the whole series of files created for a relation
based on those values. Using the same name for more than one thing is
confusing.
Replace RelFileNode with RelFileNumber when we're talking about just the
single number, i.e. (1) from above, and with RelFileLocator when we're
talking about all the things that are needed to locate a relation's files
on disk, i.e. (2) from above. In the places where we refer to (3) as
a relfilenode, instead refer to "relation storage".
Since there is a ton of SQL code in the world that knows about
pg_class.relfilenode, don't change the name of that column, or of other
SQL-facing things that derive their name from it.
On the other hand, do adjust closely-related internal terminology. For
example, the structure member names dbNode and spcNode appear to be
derived from the fact that the structure itself was called RelFileNode,
so change those to dbOid and spcOid. Likewise, various variables with
names like rnode and relnode get renamed appropriately, according to
how they're being used in context.
Hopefully, this is clearer than before. It is also preparation for
future patches that intend to widen the relfilenumber fields from its
current width of 32 bits. Variables that store a relfilenumber are now
declared as type RelFileNumber rather than type Oid; right now, these
are the same, but that can now more easily be changed.
Dilip Kumar, per an idea from me. Reviewed also by Andres Freund.
I fixed some whitespace issues, changed a couple of words in a
comment, and made one other minor correction.
Discussion: http://postgr.es/m/CA+TgmoamOtXbVAQf9hWFzonUo6bhhjS6toZQd7HZ-pmojtAmag@mail.gmail.com
Discussion: http://postgr.es/m/CA+Tgmobp7+7kmi4gkq7Y+4AM9fTvL+O1oQ4-5gFTT+6Ng-dQ=g@mail.gmail.com
Discussion: http://postgr.es/m/CAFiTN-vTe79M8uDH1yprOU64MNFE+R3ODRuA+JWf27JbhY4hJw@mail.gmail.com
This reverts commits 0147fc7, 4567596, aa64f23, and 5ecd018.
There is no longer agreement that introducing this function
was the right way to address the problem. The consensus now
seems to favor trying to make a correct value for MaxBackends
available to mdules executing their _PG_init() functions.
Nathan Bossart
Discussion: http://postgr.es/m/20220323045229.i23skfscdbvrsuxa@jrouhaud
Before commit 412ad7a556, delayChkpt
was a Boolean. Now it's an integer. Extensions using it need to be
appropriately updated, so let's rename the field to make sure that
a hard compilation failure occurs.
Replacing delayChkpt with delayChkptFlags made a few comments extend
past 80 characters, so I reflowed them and changed some wording very
slightly.
The back-branches will need a different change to restore compatibility
with existing minor releases; this is just for master.
Per suggestion from Tom Lane.
Discussion: http://postgr.es/m/a7880f4d-1d74-582a-ada7-dad168d046d1@enterprisedb.com
One problematic part of the current statistics collector design is that there
is no reliable way of getting rid of statistics entries. Because of that
pgstat_vacuum_stat() (called by [auto-]vacuum) matches all stats for the
current database with the catalog contents and tries to drop now-superfluous
entries. That's quite expensive. What's worse, it doesn't work on physical
replicas, despite physical replicas collection statistics entries.
This commit introduces infrastructure to create / drop statistics entries
transactionally, together with the underlying catalog objects (functions,
relations, subscriptions). pgstat_xact.c maintains a list of stats entries
created / dropped transactionally in the current transaction. To ensure the
removal of statistics entries is durable dropped statistics entries are
included in commit / abort (and prepare) records, which also ensures that
stats entries are dropped on standbys.
Statistics entries created separately from creating the underlying catalog
object (e.g. when stats were previously lost due to an immediate restart)
are *not* WAL logged. However that can only happen outside of the transaction
creating the catalog object, so it does not lead to "leaked" statistics
entries.
For this to work, functions creating / dropping functions / relations /
subscriptions need to call into pgstat. For subscriptions this was already
done when dropping subscriptions, via pgstat_report_subscription_drop() (now
renamed to pgstat_drop_subscription()).
This commit does not actually drop stats yet, it just provides the
infrastructure. It is however a largely independent piece of infrastructure,
so committing it separately makes sense.
Bumps XLOG_PAGE_MAGIC.
Author: Andres Freund <andres@anarazel.de>
Reviewed-By: Thomas Munro <thomas.munro@gmail.com>
Reviewed-By: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://postgr.es/m/20220303021600.hs34ghqcw6zcokdh@alap3.anarazel.de
If TRUNCATE causes some buffers to be invalidated and thus the
checkpoint does not flush them, TRUNCATE must also ensure that the
corresponding files are truncated on disk. Otherwise, a replay
from the checkpoint might find that the buffers exist but have
the wrong contents, which may cause replay to fail.
Report by Teja Mupparti. Patch by Kyotaro Horiguchi, per a design
suggestion from Heikki Linnakangas, with some changes to the
comments by me. Review of this and a prior patch that approached
the issue differently by Heikki Linnakangas, Andres Freund, Álvaro
Herrera, Masahiko Sawada, and Tom Lane.
Discussion: http://postgr.es/m/BYAPR06MB6373BF50B469CA393C614257ABF00@BYAPR06MB6373.namprd06.prod.outlook.com
As of 1eb6d65, the origin data is optionally stored in a 2PC file
header, with the data filled in EndPrepare() even in the default case
where there is no origin data to add. This was inconsistent with all
the other fields of TwoPhaseFileHeader which are initialized in
StartPrepare(), so move the initialization of origin_lsn and
origin_timestamp there instead. The effect of missing the
initialization at this early stage is only cosmetic based on the current
logic of the code, but could have led to issues in the long-term, and it
is more consistent done this way.
Reported-by: Ranier Vilela
Discussion: https://postgr.es/m/CAEudQAooECJ+gU_RZB-yhioPOV94R4ucoHAf68PiJhLpgpVpBw@mail.gmail.com
Previously, it was really easy to write code that accessed MaxBackends
before we'd actually initialized it, especially when coding up an
extension. To make this less error-prune, introduce a new function
GetMaxBackends() which should be used to obtain the correct value.
This will ERROR if called too early. Demote the global variable to
a file-level static, so that nobody can peak at it directly.
Nathan Bossart. Idea by Andres Freund. Review by Greg Sabino Mullane,
by Michael Paquier (who had doubts about the approach), and by me.
Discussion: http://postgr.es/m/20210802224204.bckcikl45uezv5e4@alap3.anarazel.de
When using replication origins, pg_replication_origin_xact_setup() is an
optional choice to be able to set a LSN and a timestamp to mark the
origin, which would be additionally added to WAL for transaction commits
or aborts (including 2PC transactions). An assertion in the code path
of PREPARE TRANSACTION assumed that this data should always be set, so
it would trigger when using replication origins without setting up an
origin LSN. Some tests are added to cover more this kind of scenario.
Oversight in commit 1eb6d65.
Per discussion with Amit Kapila and Masahiko Sawada.
Discussion: https://postgr.es/m/YbbBfNSvMm5nIINV@paquier.xyz
Backpatch-through: 11
Buildfarm members kittiwake and tadarida have witnessed errors at this
site. The site discarded key facts. Back-patch to v10 (all supported
versions).
Reviewed by Michael Paquier and Tom Lane.
Discussion: https://postgr.es/m/20211107013157.GB790288@rfd.leadboat.com
All such code deals with this global variable in one of three ways.
Sometimes the same functions use it in more than one of these ways
at the same time.
First, sometimes it's an implicit argument to one or more functions
being called in xlog.c or elsewhere, and must be set to the
appropriate value before calling those functions lest they
misbehave. In those cases, it is now passed as an explicit argument
instead.
Second, sometimes it's used to obtain the current timeline after
the end of recovery, i.e. the timeline to which WAL is being
written and flushed. Such code now calls GetWALInsertionTimeLine()
or relies on the new out parameter added to GetFlushRecPtr().
Third, sometimes it's used during recovery to store the current
replay timeline. That can change, so such code must generally
update the value before each use. It can still do that, but must
now use a local variable instead.
The net effect of these changes is to reduce by a fair amount the
amount of code that is directly accessing this global variable.
That's good, because history has shown that we don't always think
clearly about which timeline ID it's supposed to contain at any
given point in time, or indeed, whether it has been or needs to
be initialized at any given point in the code.
Patch by me, reviewed and tested by Michael Paquier, Amul Sul, and
Álvaro Herrera.
Discussion: https://postgr.es/m/CA+TgmobfAAqhfWa1kaFBBFvX+5CjM=7TE=n4r4Q1o2bjbGYBpA@mail.gmail.com
The purpose of commit 8a54e12a38 was to
fix this, and it sufficed when the PREPARE TRANSACTION completed before
the CIC looked for lock conflicts. Otherwise, things still broke. As
before, in a cluster having used CIC while having enabled prepared
transactions, queries that use the resulting index can silently fail to
find rows. It may be necessary to reindex to recover from past
occurrences; REINDEX CONCURRENTLY suffices. Fix this for future index
builds by making CIC wait for arbitrarily-recent prepared transactions
and for ordinary transactions that may yet PREPARE TRANSACTION. As part
of that, have PREPARE TRANSACTION transfer locks to its dummy PGPROC
before it calls ProcArrayClearTransaction(). Back-patch to 9.6 (all
supported versions).
Andrey Borodin, reviewed (in earlier versions) by Andres Freund.
Discussion: https://postgr.es/m/01824242-AA92-4FE9-9BA7-AEBAFFEA3D0C@yandex-team.ru
To add support for streaming transactions at prepare time into the
built-in logical replication, we need to do the following things:
* Modify the output plugin (pgoutput) to implement the new two-phase API
callbacks, by leveraging the extended replication protocol.
* Modify the replication apply worker, to properly handle two-phase
transactions by replaying them on prepare.
* Add a new SUBSCRIPTION option "two_phase" to allow users to enable
two-phase transactions. We enable the two_phase once the initial data sync
is over.
We however must explicitly disable replication of two-phase transactions
during replication slot creation, even if the plugin supports it. We
don't need to replicate the changes accumulated during this phase,
and moreover, we don't have a replication connection open so we don't know
where to send the data anyway.
The streaming option is not allowed with this new two_phase option. This
can be done as a separate patch.
We don't allow to toggle two_phase option of a subscription because it can
lead to an inconsistent replica. For the same reason, we don't allow to
refresh the publication once the two_phase is enabled for a subscription
unless copy_data option is false.
Author: Peter Smith, Ajin Cherian and Amit Kapila based on previous work by Nikhil Sontakke and Stas Kelvich
Reviewed-by: Amit Kapila, Sawada Masahiko, Vignesh C, Dilip Kumar, Takamichi Osumi, Greg Nancarrow
Tested-By: Haiying Tang
Discussion: https://postgr.es/m/02DA5F5E-CECE-4D9C-8B4B-418077E2C010@postgrespro.ru
Discussion: https://postgr.es/m/CAA4eK1+opiV4aFTmWWUF9h_32=HfPOW9vZASHarT0UA5oBrtGw@mail.gmail.com
Also "make reformat-dat-files".
The only change worthy of note is that pgindent messed up the formatting
of launcher.c's struct LogicalRepWorkerId, which led me to notice that
that struct wasn't used at all anymore, so I just took it out.
This set of commits has some bugs with known fixes, but at this late
stage in the release cycle it seems best to revert and resubmit next
time, along with some new automated test coverage for this whole area.
Commits reverted:
dc88460c: Doc: Review for "Optionally prefetch referenced data in recovery."
1d257577: Optionally prefetch referenced data in recovery.
f003d9f8: Add circular WAL decoding buffer.
323cbe7c: Remove read_page callback from XLogReader.
Remove the new GUC group WAL_RECOVERY recently added by a55a9847, as the
corresponding section of config.sgml is now reverted.
Discussion: https://postgr.es/m/CAOuzzgrn7iKnFRsB4MHp3UisEQAGgZMbk_ViTN4HV4-Ksq8zCg%40mail.gmail.com
