Instead of having five separate GUC structs, one for each type, with
the generic part contained in each of them, flip it around and have
one common struct, with the type-specific part has a subfield.
The very original GUC design had type-specific structs and
type-specific lists, and the membership in one of the lists defined
the type. But now the structs themselves know the type (from the
.vartype field), and they are all loaded into a common hash table at
run time, and so this original separation no longer makes sense. It
creates a bunch of inconsistencies in the code about whether the
type-specific or the generic struct is the primary struct, and a lot
of casting in between, which makes certain assumptions about the
struct layouts.
After the change, all these casts are gone and all the data is
accessed via normal field references. Also, various code is
simplified because only one kind of struct needs to be processed.
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Discussion: https://www.postgresql.org/message-id/flat/8fdfb91e-60fb-44fa-8df6-f5dea47353c9@eisentraut.org
MSVC in C11 mode supports the standard restrict qualifier, so we don't
need the workaround naming pg_restrict anymore.
Even though restrict is in C99 and should be supported by all
supported compilers, we keep the configure test and the hardcoded
redirection to __restrict, because that will also work in C++ in all
supported compilers. (restrict is not part of the C++ standard.)
For backward compatibility for extensions, we keep a #define of
pg_restrict around, but our own code doesn't use it anymore.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/0e3d8644-c01d-4374-86ea-9f0a987981f0%40eisentraut.org
XLogRecordAssemble() may be called multiple times before inserting a
record in XLogInsertRecord(), and the amount of FPIs generated inside
a record whose insertion is attempted multiple times may vary.
The logic added in f9a09aa295 touched directly pgWalUsage in
XLogRecordAssemble(), meaning that it could be possible for pgWalUsage
to be incremented multiple times for a single record. This commit
changes the code to use the same logic as the number of FPIs added to a
record, where XLogRecordAssemble() returns this information and feeds it
to XLogInsertRecord(), updating pgWalUsage only when a record is
inserted.
Reported-by: Shinya Kato <shinya11.kato@gmail.com>
Discussion: https://postgr.es/m/CAOzEurSiSr+rusd0GzVy8Bt30QwLTK=ugVMnF6=5WhsSrukvvw@mail.gmail.com
This new counter, called "wal_fpi_bytes", tracks the total amount in
bytes of full page images (FPIs) generated in WAL. This data becomes
available globally via pg_stat_wal, and for backend statistics via
pg_stat_get_backend_wal().
Previously, this information could only be retrieved with pg_waldump or
pg_walinspect, which may not be available depending on the environment,
and are expensive to execute. It offers hints about how much FPIs
impact the WAL generated, which could be a large percentage for some
workloads, as well as the effects of wal_compression or page holes.
Bump catalog version.
Bump PGSTAT_FILE_FORMAT_ID, due to the addition of wal_fpi_bytes in
PgStat_WalCounters.
Author: Shinya Kato <shinya11.kato@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/CAOzEurQtZEAfg6P0kU3Wa-f9BWQOi0RzJEMPN56wNTOmJLmfaQ@mail.gmail.com
This type is just char * underneath, it provides no real value, no
type safety, and just makes the code one level more mysterious. It is
more idiomatic to refer to blobs of memory by a combination of void *
and size_t, so change it to that.
Also, since this type hides the pointerness, we can't apply qualifiers
to what is pointed to, which requires some unconstify nonsense. This
change allows fixing that.
Extension code that uses the Item type can change its code to use
void * to be backward compatible.
Reviewed-by: Nathan Bossart <nathandbossart@gmail.com>
Reviewed-by: Peter Geoghegan <pg@bowt.ie>
Discussion: https://www.postgresql.org/message-id/flat/c75cccf5-5709-407b-a36a-2ae6570be766@eisentraut.org
This patch adds support for a new SQL command:
ALTER SUBSCRIPTION ... REFRESH SEQUENCES
This command updates the sequence entries present in the
pg_subscription_rel catalog table with the INIT state to trigger
resynchronization.
In addition to the new command, the following subscription commands have
been enhanced to automatically refresh sequence mappings:
ALTER SUBSCRIPTION ... REFRESH PUBLICATION
ALTER SUBSCRIPTION ... ADD PUBLICATION
ALTER SUBSCRIPTION ... DROP PUBLICATION
ALTER SUBSCRIPTION ... SET PUBLICATION
These commands will perform the following actions:
Add newly published sequences that are not yet part of the subscription.
Remove sequences that are no longer included in the publication.
This ensures that sequence replication remains aligned with the current
state of the publication on the publisher side.
Note that the actual synchronization of sequence data/values will be
handled in a subsequent patch that introduces a dedicated sequence sync
worker.
Author: Vignesh C <vignesh21@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Reviewed-by: shveta malik <shveta.malik@gmail.com>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-by: Hayato Kuroda <kuroda.hayato@fujitsu.com>
Reviewed-by: Dilip Kumar <dilipbalaut@gmail.com>
Reviewed-by: Peter Smith <smithpb2250@gmail.com>
Reviewed-by: Nisha Moond <nisha.moond412@gmail.com>
Reviewed-by: Shlok Kyal <shlok.kyal.oss@gmail.com>
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Reviewed-by: Hou Zhijie <houzj.fnst@fujitsu.com>
Discussion: https://postgr.es/m/CAA4eK1LC+KJiAkSrpE_NwvNdidw9F2os7GERUeSxSKv71gXysQ@mail.gmail.com
Previously, if primary_slot_name was set to an invalid slot name and
the configuration file was reloaded, both the postmaster and all other
backend processes reported a WARNING. With many processes running,
this could produce a flood of duplicate messages. The problem was that
the GUC check hook for primary_slot_name reported errors at WARNING
level via ereport().
This commit changes the check hook to use GUC_check_errdetail() and
GUC_check_errhint() for error reporting. As with other GUC parameters,
this causes non-postmaster processes to log the message at DEBUG3,
so by default, only the postmaster's message appears in the log file.
Backpatch to all supported versions.
Author: Fujii Masao <masao.fujii@gmail.com>
Reviewed-by: Chao Li <lic@highgo.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Reviewed-by: Álvaro Herrera <alvherre@kurilemu.de>
Reviewed-by: Hayato Kuroda <kuroda.hayato@fujitsu.com>
Discussion: https://postgr.es/m/CAHGQGwFud-cvthCTfusBfKHBS6Jj6kdAPTdLWKvP2qjUX6L_wA@mail.gmail.com
Backpatch-through: 13
This fixes an unlikely issue when fetching GROUPING SET results from
their internally stored hash tables. It was possible in rare cases that
the hash iterator would be set up incorrectly which could result in a
crash.
This was introduced in 4d143509c, so backpatch to v18.
Many thanks to Yuri Zamyatin for reporting and helping to debug this
issue.
Bug: #19078
Reported-by: Yuri Zamyatin <yuri@yrz.am>
Author: David Rowley <dgrowleyml@gmail.com>
Reviewed-by: Jeff Davis <pgsql@j-davis.com>
Discussion: https://postgr.es/m/19078-dfd62f840a2c0766@postgresql.org
Backpatch-through: 18
Per-character pg_locale_t APIs. Useful for tsearch parsing and
potentially other places.
Significant overlap with the regc_wc_isalpha() and related functions
in regc_pg_locale.c, but this change leaves those intact for
now.
Discussion: https://postgr.es/m/0151ad01239e2cc7b3139644358cf8f7b9622ff7.camel@j-davis.com
Presently, these functions look up the relation's OID, lock it, and
then check privileges. Not only does this approach provide no
guarantee that the locked relation matches the arguments of the
lookup, but it also allows users to briefly lock relations for
which they do not have privileges, which might enable
denial-of-service attacks. This commit adjusts these functions to
use RangeVarGetRelidExtended(), which is purpose-built to avoid
both of these issues. The new RangeVarGetRelidCallback function is
somewhat complicated because it must handle both tables and
indexes, and for indexes, we must check privileges on the parent
table and lock it first. Also, it needs to handle a couple of
extremely unlikely race conditions involving concurrent OID reuse.
A downside of this change is that the coding doesn't allow for
locking indexes in AccessShare mode anymore; everything is locked
in ShareUpdateExclusive mode. Per discussion, the original choice
of lock levels was intended for a now defunct implementation that
used in-place updates, so we believe this change is okay.
Reviewed-by: Jeff Davis <pgsql@j-davis.com>
Discussion: https://postgr.es/m/Z8zwVmGzXyDdkAXj%40nathan
Backpatch-through: 18
The log output functionality of log_autovacuum_min_duration applies to
both VACUUM and ANALYZE, so it is not possible to separate the VACUUM
and ANALYZE log output thresholds. Logs are likely to be output only for
VACUUM and not for ANALYZE.
Therefore, we decided to separate the threshold for log output of VACUUM
by autovacuum (log_autovacuum_min_duration) and the threshold for log
output of ANALYZE by autovacuum (log_autoanalyze_min_duration).
Author: Shinya Kato <shinya11.kato@gmail.com>
Reviewed-by: Kasahara Tatsuhito <kasaharatt@oss.nttdata.com>
Discussion: https://www.postgresql.org/message-id/flat/CAOzEurQtfV4MxJiWT-XDnimEeZAY+rgzVSLe8YsyEKhZcajzSA@mail.gmail.com
If inside an EPQ recheck, ExecScanFetch would run the recheck method
function for foreign/custom joins even if they aren't descendant nodes
in the EPQ recheck plan tree, which is problematic at least in the
foreign-join case, because such a foreign join isn't guaranteed to have
an alternative local-join plan required for running the recheck method
function; in the postgres_fdw case this could lead to a segmentation
fault or an assert failure in an assert-enabled build when running the
recheck method function.
Even if inside an EPQ recheck, any scan nodes that aren't descendant
ones in the EPQ recheck plan tree should be normally processed by using
the access method function; fix by modifying ExecScanFetch so that if
inside an EPQ recheck, it runs the recheck method function for
foreign/custom joins that are descendant nodes in the EPQ recheck plan
tree as before and runs the access method function for foreign/custom
joins that aren't.
This fix also adds to postgres_fdw an isolation test for an EPQ recheck
that caused issues stated above.
Oversight in commit 385f337c9.
Reported-by: Kristian Lejao <kristianlejao@gmail.com>
Author: Masahiko Sawada <sawada.mshk@gmail.com>
Co-authored-by: Etsuro Fujita <etsuro.fujita@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Etsuro Fujita <etsuro.fujita@gmail.com>
Discussion: https://postgr.es/m/CAD21AoBpo6Gx55FBOW+9s5X=nUw3Xpq64v35fpDEKsTERnc4TQ@mail.gmail.com
Backpatch-through: 13
get_pg_version() is able to return a version number, that can be used
for comparisons based on PG_VERSION_NUM. A macro is added to convert
the result to a major version number, to work with PG_MAJORVERSION_NUM.
It is possible to pass to the routine an optional argument, where the
contents retrieved from PG_VERSION are saved. This requirement matters
for some of the frontend code (one example: pg_upgrade wants that for
tablespace paths with a version number strictly older than v10).
This will be used by a set of follow-up patches, to be consumed in
various frontend tools that duplicate a logic similar to do what this
new routine does, like:
- pg_resetwal
- pg_combinebackup
- pg_createsubscriber
- pg_upgrade
This routine supports both the post-v10 version number and the older
flavor (aka 9.6), as required at least by pg_upgrade.
Author: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Discussion: https://postgr.es/m/aOiirvWJzwdVCXph@paquier.xyz
Instead of emitting a separate XLOG_HEAP2_VISIBLE WAL record for each
page that becomes all-visible in vacuum's third phase, specify the VM
changes in the already emitted XLOG_HEAP2_PRUNE_VACUUM_CLEANUP record.
Visibility checks are now performed before marking dead items unused.
This is safe because the heap page is held under exclusive lock for the
entire operation.
This reduces the number of WAL records generated by VACUUM phase III by
up to 50%.
Author: Melanie Plageman <melanieplageman@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Reviewed-by: Kirill Reshke <reshkekirill@gmail.com>
Discussion: https://postgr.es/m/flat/CAAKRu_ZMw6Npd_qm2KM%2BFwQ3cMOMx1Dh3VMhp8-V7SOLxdK9-g%40mail.gmail.com
log_error() would probably fail completely if used, and would
certainly print garbage for anything that needed to be interpolated
into the message, because it was failing to use the correct printing
subroutine for a va_list argument.
This bug likely went undetected because the error cases this code
is used for are rarely exercised - they only occur when Windows
security API calls fail catastrophically (out of memory, security
subsystem corruption, etc).
The FRONTEND variant can be fixed just by calling vfprintf()
instead of fprintf(). However, there was no va_list variant
of write_stderr(), so create one by refactoring that function.
Following the usual naming convention for such things, call
it vwrite_stderr().
Author: Bryan Green <dbryan.green@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CAF+pBj8goe4fRmZ0V3Cs6eyWzYLvK+HvFLYEYWG=TzaM+tWPnw@mail.gmail.com
Backpatch-through: 13
This patch adds support for the ALL SEQUENCES clause in publications,
enabling synchronization/replication of all sequences that is useful for
upgrades.
Publications can now include all sequences via FOR ALL SEQUENCES.
psql enhancements:
\d shows publications for a given sequence.
\dRp indicates if a publication includes all sequences.
ALL SEQUENCES can be combined with ALL TABLES, but not with other options
like TABLE or TABLES IN SCHEMA. We can extend support for more granular
clauses in future.
The view pg_publication_sequences provides information about the mapping
between publications and sequences.
This patch enables publishing of sequences; subscriber-side support will
be added in upcoming patches.
Author: vignesh C <vignesh21@gmail.com>
Author: Tomas Vondra <tomas@vondra.me>
Reviewed-by: shveta malik <shveta.malik@gmail.com>
Reviewed-by: Dilip Kumar <dilipbalaut@gmail.com>
Reviewed-by: Peter Smith <smithpb2250@gmail.com>
Reviewed-by: Hayato Kuroda <kuroda.hayato@fujitsu.com>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-by: Nisha Moond <nisha.moond412@gmail.com>
Reviewed-by: Shlok Kyal <shlok.kyal.oss@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Discussion: https://postgr.es/m/CAA4eK1LC+KJiAkSrpE_NwvNdidw9F2os7GERUeSxSKv71gXysQ@mail.gmail.com
Previously StrategyGetBuffer() acquired the buffer header spinlock for every
buffer, whether it was reusable or not. If reusable, it'd be returned, with
the lock held, to GetVictimBuffer(), which then would pin the buffer with
PinBuffer_Locked(). That's somewhat violating the spirit of the guidelines for
holding spinlocks (i.e. that they are only held for a few lines of consecutive
code) and necessitates using PinBuffer_Locked(), which scales worse than
PinBuffer() due to holding the spinlock. This alone makes it worth changing
the code.
However, the main reason to change this is that a future commit will make
PinBuffer_Locked() slower (due to making UnlockBufHdr() slower), to gain
scalability for the much more common case of pinning a pre-existing buffer. By
pinning the buffer with a single atomic operation, iff the buffer is reusable,
we avoid any potential regression for miss-heavy workloads. There strictly are
fewer atomic operations for each potential buffer after this change.
The price for this improvement is that freelist.c needs two CAS loops and
needs to be able to set up the resource accounting for pinned buffers. The
latter is achieved by exposing a new function for that purpose from bufmgr.c,
that seems better than exposing the entire private refcount infrastructure.
The improvement seems worth the complexity.
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Reviewed-by: Matthias van de Meent <boekewurm+postgres@gmail.com>
Discussion: https://postgr.es/m/fvfmkr5kk4nyex56ejgxj3uzi63isfxovp2biecb4bspbjrze7@az2pljabhnff
We're planning to merge buffer content locks into BufferDesc.state. To reduce
the size of that patch, centralize calls to BufferDescriptorGetContentLock().
The biggest part of the change is in assertions, by introducing
BufferIsLockedByMe[InMode]() (and removing BufferIsExclusiveLocked()). This
seems like an improvement even without aforementioned plans.
Additionally replace some direct calls to LWLockAcquire() with calls to
LockBuffer().
Reviewed-by: Matthias van de Meent <boekewurm+postgres@gmail.com>
Discussion: https://postgr.es/m/fvfmkr5kk4nyex56ejgxj3uzi63isfxovp2biecb4bspbjrze7@az2pljabhnff
In the same spirit as 3bf905692, assume that all compilers we still
support provide the NAN macro, and get rid of workarounds for that.
The C standard allows implementations to omit NAN if the underlying
float arithmetic lacks quiet (non-signaling) NaNs. However, we've
required that feature for years: the workarounds only supported
lack of the macro, not lack of the functionality. I put in a
compile-time #error if there's no macro, just for clarity.
Also fix up the copies of these functions in ecpglib, and leave
a breadcrumb for the next hacker who touches them.
History of the hacks being removed here can be found in commits
1bc2d544b, 4d17a2146, cec8394b5.
Author: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/1952095.1759764279@sss.pgh.pa.us
These hooks allow plugins to get control at the earliest point at
which the PlannerGlobal object is fully initialized, and then just
before it gets destroyed. This is useful in combination with the
extendable plan state facilities (see extendplan.h) and perhaps for
other purposes as well.
Reviewed-by: Andrei Lepikhov <lepihov@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: http://postgr.es/m/CA+TgmoYWKHU2hKr62Toyzh-kTDEnMDeLw7gkOOnjL-TnOUq0kQ@mail.gmail.com
This allows extensions to have access to any data they've stored
in the ExplainState during planning. Unfortunately, it won't help
with EXPLAIN EXECUTE is used, but since that case is less common,
this still seems like an improvement.
Since planner() has quite a few arguments now, also add some
documentation of those arguments and the return value.
Author: Robert Haas <rhaas@postgresql.org>
Co-authored-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Andrei Lepikhov <lepihov@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: http://postgr.es/m/CA+TgmoYWKHU2hKr62Toyzh-kTDEnMDeLw7gkOOnjL-TnOUq0kQ@mail.gmail.com
