An out-of-memory error during expand_table() on a palloc-based hash table
would leave a partially-initialized entry in the table. This would not be
harmful for transient hash tables, since they'd get thrown away anyway at
transaction abort. But for long-lived hash tables, such as the relcache
hash, this would effectively corrupt the table, leading to crash or other
misbehavior later.
To fix, rearrange the order of operations so that table enlargement is
attempted before we insert a new entry, rather than after adding it
to the hash table.
Problem discovered by Hitoshi Harada, though this is a bit different
from his proposed patch.
Don't leak a file descriptor if the file is empty or we can't read its size.
Expect there to be a newline at the end of the last line, too. If there
isn't, ignore anything after the last newline. This makes it a tiny bit
more robust in case the file is appended to concurrently, so that we don't
return the last line if it hasn't been fully written yet. And this makes
the code a bit less obscure, anyway. Per Tom Lane's suggestion.
Backpatch to all supported branches.
If a potential equivalence clause references a variable from the nullable
side of an outer join, the planner needs to take care that derived clauses
are not pushed to below the outer join; else they may use the wrong value
for the variable. (The problem arises only with non-strict clauses, since
if an upper clause can be proven strict then the outer join will get
simplified to a plain join.) The planner attempted to prevent this type
of error by checking that potential equivalence clauses aren't
outerjoin-delayed as a whole, but actually we have to check each side
separately, since the two sides of the clause will get moved around
separately if it's treated as an equivalence. Bugs of this type can be
demonstrated as far back as 7.4, even though releases before 8.3 had only
a very ad-hoc notion of equivalence clauses.
In addition, we neglected to account for the possibility that such clauses
might have nonempty nullable_relids even when not outerjoin-delayed; so the
equivalence-class machinery lacked logic to compute correct nullable_relids
values for clauses it constructs. This oversight was harmless before 9.2
because we were only using RestrictInfo.nullable_relids for OR clauses;
but as of 9.2 it could result in pushing constructed equivalence clauses
to incorrect places. (This accounts for bug #7604 from Bill MacArthur.)
Fix the first problem by adding a new test check_equivalence_delay() in
distribute_qual_to_rels, and fix the second one by adding code in
equivclass.c and called functions to set correct nullable_relids for
generated clauses. Although I believe the second part of this is not
currently necessary before 9.2, I chose to back-patch it anyway, partly to
keep the logic similar across branches and partly because it seems possible
we might find other reasons why we need valid values of nullable_relids in
the older branches.
Add regression tests illustrating these problems. In 9.0 and up, also
add test cases checking that we can push constants through outer joins,
since we've broken that optimization before and I nearly broke it again
with an overly simplistic patch for this problem.
If postmaster changed postmaster.pid while pg_ctl was reading it, pg_ctl
could overrun the buffer it allocated for the file. Fix by reading the
whole file to memory with one read() call.
initdb contains an identical copy of the readfile() function, but the files
that initdb reads are static, not modified concurrently. Nevertheless, add
a simple bounds-check there, if only to silence static analysis tools.
Per report from Dave Vitek. Backpatch to all supported branches.
When hashing a subplan like "WHERE (a, b) NOT IN (SELECT x, y FROM ...)",
findPartialMatch() attempted to match rows using the hashtable's internal
equality operators, which of course are for x and y's datatypes. What we
need to use are the potentially cross-type operators for a=x, b=y, etc.
Failure to do that leads to wrong answers or even crashes. The scope for
problems is limited to cases where we have different types with compatible
hash functions (else we'd not be using a hashed subplan), but for example
int4 vs int8 can cause the problem.
Per bug #7597 from Bo Jensen. This has been wrong since the hashed-subplan
code was written, so patch all the way back.
Building a shlib on AIX requires use of the mkldexport.sh script, but we
failed to install that, preventing its use from non-source-tree contexts.
Also, Makefile.aix had the wrong idea about where to find the installed
copy of the postgres.imp symbol file used by AIX.
Per report from John Pierce. Patch all the way back, since this has been
broken since the beginning of PGXS.
I found that these functions tend to return -1 while leaving an empty error
message string in the PGconn, if they suffer some kind of I/O error on the
file. The reason is that lo_close, which thinks it's executed a perfectly
fine SQL command, clears the errorMessage. The minimum-change workaround
is to reorder operations here so that we don't fill the errorMessage until
after lo_close.
Instead of continuing if the next character is not an array boundary get_data()
used to continue only on finding a boundary so it was not able to read any
element after the first.
These reference pages still claimed that you have to be superuser to create
a database or schema owned by a different role. That was true before 8.1,
but it was changed in commits aa1110624c and
f91370cd2f to allow assignment of ownership
to any role you are a member of. However, at the time we were thinking of
that primarily as a change to the ALTER OWNER rules, so the need to touch
these two CREATE ref pages got missed.
Apparently this was considered in the original code (see commit
cec3b0a9) but I failed to notice that such entries would always be
skipped by the database check at the start of the loop.
Per bugs #7578 by Nikolay, #6116 by tushar.qa@gmail.com.
The tar output module did some very ugly and ultimately incorrect hacking
on COPY commands to try to get them to work in the context of restoring a
deconstructed tar archive. In particular, it would fail altogether for
table names containing any upper-case characters, since it smashed the
command string to lower-case before modifying it (and, just to add insult
to injury, did that in a way that would fail in multibyte encodings).
I don't see any particular value in being flexible about the case of the
command keywords, since the string will just have been created by
dumpTableData, so let's get rid of the whole case-folding thing.
Also, it doesn't seem to meet the POLA for the script to restore data only
in COPY mode, so add \i commands to make it have comparable behavior in
--inserts mode.
Noted while looking at the tar-output code in connection with Brian
Weaver's patch.
Back-patch portions of commit 05b555d12b.
We need to patch pg_restore to accept either version of the magic string,
in hopes of avoiding compatibility problems when 9.3 comes out. I also
fixed pg_dump to write the correct 2-block EOF marker, since that won't
create a compatibility problem with pg_restore and it could help with some
versions of tar.
Brian Weaver and Tom Lane
The syntax "su -c 'command' username" is not accepted by all versions of
su, for example not OpenBSD's. More portable is "su username -c
'command'". So change runtime.sgml to recommend that syntax. Also,
add a -D switch to the OpenBSD example script, for consistency with other
examples. Per Denis Lapshin and Gábor Hidvégi.
Somewhere along the line, somebody decided to remove all trace of this
notation from the documentation text. It was still in the command syntax
synopses, or at least some of them, but with no indication what it meant.
This will not do, as evidenced by the confusion apparent in bug #7543;
even if the notation is now unnecessary, people will find it in legacy
SQL code and need to know what it does.
The documentation mentioned setting autovacuum_freeze_max_age to
"its maximum allowed value of a little less than two billion".
This led to a post asking about the exact maximum allowed value,
which is precisely two billion, not "a little less".
Based on question by Radovan Jablonovsky. Backpatch to 8.3.
Back-patch commits 9afc648111 and
b8fbbcf37f. The first of these is really
a minor code cleanup to save a few cycles, but it turns out to provide
a workaround for the misoptimization problem described in bug #7516.
The second commit adds a regression test case.
Back-patch the fix to all active branches. The test case only works
as far back as 9.0, because it relies on plpgsql which isn't installed
by default before that. (I didn't have success modifying it into an
all-plperl form that still provoked a crash, though this may just reflect
my lack of Perl-fu.)
validate_plperl_function() supposed that it could free an old
plperl_proc_desc struct immediately upon detecting that it was stale.
However, if a plperl function is called recursively, this could result
in deleting the struct out from under an outer invocation, leading to
misbehavior or crashes. Add a simple reference-count mechanism to
ensure that such structs are freed only when the last reference goes
away.
Per investigation of bug #7516 from Marko Tiikkaja. I am not certain
that this error explains his report, because he says he didn't have
any recursive calls --- but it's hard to see how else it could have
crashed right there. In any case, this definitely fixes some problems
in the area.
Back-patch to all active branches.
The planner previously assumed that parameter Vars having the same absolute
query level, varno, and varattno could safely be assigned the same runtime
PARAM_EXEC slot, even though they might be different Vars appearing in
different subqueries. This was (probably) safe before the introduction of
CTEs, but the lazy-evalution mechanism used for CTEs means that a CTE can
be executed during execution of some other subquery, causing the lifespan
of Params at the same syntactic nesting level as the CTE to overlap with
use of the same slots inside the CTE. In 9.1 we created additional hazards
by using the same parameter-assignment technology for nestloop inner scan
parameters, but it was broken before that, as illustrated by the added
regression test.
To fix, restructure the planner's management of PlannerParamItems so that
items having different semantic lifespans are kept rigorously separated.
This will probably result in complex queries using more runtime PARAM_EXEC
slots than before, but the slots are cheap enough that this hardly matters.
Also, stop generating PlannerParamItems containing Params for subquery
outputs: all we really need to do is reserve the PARAM_EXEC slot number,
and that now only takes incrementing a counter. The planning code is
simpler and probably faster than before, as well as being more correct.
Per report from Vik Reykja.
Back-patch of commit 46c508fbcf into all
branches that support WITH.
Give the correct name of the GUC parameter being complained of.
Also, emit a more suitable SQLSTATE (INVALID_PARAMETER_VALUE,
not the default INTERNAL_ERROR).
Gurjeet Singh, errcode adjustment by me
pg_upgrade opened the output from pg_dumpall in text mode and
wrote the split files in text mode. This caused unwanted eating
of intended carriage returns on input and production of spurious
carriage returns on output. To avoid this, open all these files
in binary mode. On non-Windows platforms, this change has no
effect.
Backpatch to 9.0. On 9.0 and 9.1, we also switch from redirecting
pg_dumpall's output to using pg_dumpall's -f switch, for the same
reason.
Perl, for some unaccountable reason, believes it's a good idea to reset
SIGFPE handling to SIG_IGN. Which wouldn't be a good idea even if it
worked; but on some platforms (Linux at least) it doesn't work at all,
instead resulting in forced process termination if the signal occurs.
Given the lack of other complaints, it seems safe to assume that Perl
never actually provokes SIGFPE and so there is no value in the setting
anyway. Hence, reset it to our normal handler after initializing Perl.
Report, analysis and patch by Andres Freund.
pg_upgrade produces a platform-specific script to remove the old
directory, but on Windows it has not been making sure that the
paths it writes as arguments for rmdir and del use the backslash
path separator, which will cause these scripts to fail.
The fix is backpatched to Release 9.0.
This back-ports commits c8ba697a4b and
e5db11c558, which fix one definite and one
speculative bug in gistchoose, and make the code a lot more intelligible as
well. In 9.2 only, this also affects the largely-copied-and-pasted logic
in gistRelocateBuildBuffersOnSplit.
The impact of the bugs was that the functions might make poor decisions
as to which index tree branch to push a new entry down into, resulting in
GiST index bloat and poor performance. The fixes rectify these decisions
for future insertions, but a REINDEX would be needed to clean up any
existing index bloat.
Alexander Korotkov, Robert Haas, Tom Lane
The existing documentation in Linux Memory Overcommit seemed to
assume that PostgreSQL itself could never be the problem, or at
least it didn't tell you what to do about it.
Per discussion with Craig Ringer and Kevin Grittner.
If we revoke a grant option from some role X, but X still holds the option
via another grant, we should not recursively revoke the privilege from
role(s) Y that X had granted it to. This was supposedly fixed as one
aspect of commit 4b2dafcc0b, but I must not
have tested it, because in fact that code never worked: it forgot to shift
the grant-option bits back over when masking the bits being revoked.
Per bug #6728 from Daniel German. Back-patch to all active branches,
since this has been wrong since 8.0.
The previous coding essentially assumed that nodes would be rescanned in
the same order they were initialized in; or at least that the "leader" of
a group of CTEscans would be rescanned before any others were required to
execute. Unfortunately, that isn't even a little bit true. It's possible
to devise queries in which the leader isn't rescanned until other CTEscans
on the same CTE have run to completion, or even in which the leader never
gets a rescan call at all.
The fix makes the leader specially responsible only for initial creation
and final destruction of the tuplestore; rescan resets are now a
symmetrically shared responsibility. This means that we might reset the
tuplestore multiple times when restarting a plan subtree containing
multiple CTEscans; but resetting an already-empty tuplestore is cheap
enough that that doesn't seem like a problem.
Per report from Adam Mackler; the new regression test cases are based on
his example query.
Back-patch to 8.4 where CTE scans were introduced.
libxslt offers the ability to read and write both files and URLs through
stylesheet commands, thus allowing unprivileged database users to both read
and write data with the privileges of the database server. Disable that
through proper use of libxslt's security options.
Also, remove xslt_process()'s ability to fetch documents and stylesheets
from external files/URLs. While this was a documented "feature", it was
long regarded as a terrible idea. The fix for CVE-2012-3489 broke that
capability, and rather than expend effort on trying to fix it, we're just
going to summarily remove it.
While the ability to write as well as read makes this security hole
considerably worse than CVE-2012-3489, the problem is mitigated by the fact
that xslt_process() is not available unless contrib/xml2 is installed,
and the longstanding warnings about security risks from that should have
discouraged prudent DBAs from installing it in security-exposed databases.
Reported and fixed by Peter Eisentraut.
Security: CVE-2012-3488
xml_parse() would attempt to fetch external files or URLs as needed to
resolve DTD and entity references in an XML value, thus allowing
unprivileged database users to attempt to fetch data with the privileges
of the database server. While the external data wouldn't get returned
directly to the user, portions of it could be exposed in error messages
if the data didn't parse as valid XML; and in any case the mere ability
to check existence of a file might be useful to an attacker.
The ideal solution to this would still allow fetching of references that
are listed in the host system's XML catalogs, so that documents can be
validated according to installed DTDs. However, doing that with the
available libxml2 APIs appears complex and error-prone, so we're not going
to risk it in a security patch that necessarily hasn't gotten wide review.
So this patch merely shuts off all access, causing any external fetch to
silently expand to an empty string. A future patch may improve this.
In HEAD and 9.2, also suppress warnings about undefined entities, which
would otherwise occur as a result of not loading referenced DTDs. Previous
branches don't show such warnings anyway, due to different error handling
arrangements.
Credit to Noah Misch for first reporting the problem, and for much work
towards a solution, though this simplistic approach was not his preference.
Also thanks to Daniel Veillard for consultation.
Security: CVE-2012-3489
DST law changes in Morocco; Tokelau has relocated to the other side of
the International Date Line; and apparently Olson had Tokelau's GMT
offset wrong by an hour even before that.
There are also a large number of non-significant changes in this update.
Upstream took the opportunity to remove trailing whitespace, and the
SCCS-style version numbers on the individual files are gone too.
Should be limited to the maximum number of connections excluding
autovacuum workers, not including.
Add similar check for max_wal_senders, which should never be higher than
max_connections.
This alternative expected output file is required when using SQL_ASCII
as the client and server encoding. The python encoding conversion used to
throw an error on that, but it is now accepted and you get the UTF-8
representation of the string. I thought that case was already covered by
the other expected output files, but the buildfarm says otherwise.
This is only required on REL9_2_STABLE. In 9.1, we explicitly set
client_encoding to UTF-8 to avoid this.
We used to convert the unicode object directly to a string in the server
encoding by calling Python's PyUnicode_AsEncodedString function. In other
words, we used Python's routines to do the encoding. However, that has a
few problems. First of all, it required keeping a mapping table of Python
encoding names and PostgreSQL encodings. But the real killer was that Python
doesn't support EUC_TW and MULE_INTERNAL encodings at all.
Instead, convert the Python unicode object to UTF-8, and use PostgreSQL's
encoding conversion functions to convert from UTF-8 to server encoding. We
were already doing the same in the other direction in PLyUnicode_FromString,
so this is more consistent, too.
Note: This makes SQL_ASCII to behave more leniently. We used to map
SQL_ASCII to Python's 'ascii', which on Python means strict 7-bit ASCII
only, so you got an error if the python string contained anything but pure
ASCII. You no longer get an error; you get the UTF-8 representation of the
string instead.
Backpatch to 9.0, where these conversions were introduced.
Jan Urbański
