is available during datatype input in Bind message processing. I put the
PopActiveSnapshot() or equivalent just before PortalDefineQuery, which is
an unsafe spot for it (in 8.3 and later) because we are carrying a plancache
refcount that hasn't yet been assigned to the portal. Any error thrown there
would result in leaking the refcount. It's not exactly likely that
PopActiveSnapshot would throw an elog, perhaps, but it could happen.
Reorder the code and add another comment warning not to do that.
when they are invoked by the parser. We had been setting up a snapshot at
plan time but really it needs to be done earlier, before parse analysis.
Per report from Dmitry Koterov.
Also fix two related problems discovered while poking at this one:
exec_bind_message called datatype input functions without establishing a
snapshot, and SET CONSTRAINTS IMMEDIATE could call trigger functions without
establishing a snapshot.
Backpatch to 8.2. The underlying problem goes much further back, but it is
masked in 8.1 and before because we didn't attempt to invoke domain check
constraints within datatype input. It would only be exposed if a C-language
datatype input function used the snapshot; which evidently none do, or we'd
have heard complaints sooner. Since this code has changed a lot over time,
a back-patch is hardly risk-free, and so I'm disinclined to patch further
than absolutely necessary.
replication patch needs a signal, but we've already used SIGUSR1 and
SIGUSR2 in normal backends. This patch allows reusing SIGUSR1 for that,
and for other purposes too if the need arises.
that a Portal is a useful and sufficient additional argument for
CreateDestReceiver --- it just isn't, in most cases. Instead formalize
the approach of passing any needed parameters to the receiver separately.
One unexpected benefit of this change is that we can declare typedef Portal
in a less surprising location.
This patch is just code rearrangement and doesn't change any functionality.
I'll tackle the HOLD-cursor-vs-toast problem in a follow-on patch.
free space information is stored in a dedicated FSM relation fork, with each
relation (except for hash indexes; they don't use FSM).
This eliminates the max_fsm_relations and max_fsm_pages GUC options; remove any
trace of them from the backend, initdb, and documentation.
Rewrite contrib/pg_freespacemap to match the new FSM implementation. Also
introduce a new variant of the get_raw_page(regclass, int4, int4) function in
contrib/pageinspect that let's you to return pages from any relation fork, and
a new fsm_page_contents() function to inspect the new FSM pages.
debug_print_plan to appear at LOG message level, not DEBUG1 as historically.
Make debug_pretty_print default to on. Also, cause plans generated via
EXPLAIN to be subject to debug_print_plan. This is all to make
debug_print_plan a reasonably comfortable substitute for the former behavior
of EXPLAIN VERBOSE.
a portal are never NULL, but reliably provide the source text of the query.
It turns out that there was only one place that was really taking a short-cut,
which was the 'EXECUTE' utility statement. That doesn't seem like a
sufficiently critical performance hotspot to justify not offering a guarantee
of validity of the portal source text. Fix it to copy the source text over
from the cached plan. Add Asserts in the places that set up cached plans and
portals to reject null source strings, and simplify a bunch of places that
formerly needed to guard against nulls.
There may be a few places that cons up statements for execution without
having any source text at all; I found one such in ConvertTriggerToFK().
It seems sufficient to inject a phony source string in such a case,
for instance
ProcessUtility((Node *) atstmt,
"(generated ALTER TABLE ADD FOREIGN KEY command)",
NULL, false, None_Receiver, NULL);
We should take a second look at the usage of debug_query_string,
particularly the recently added current_query() SQL function.
ITAGAKI Takahiro and Tom Lane
functions.
Note that because this patch changes FmgrInfo, any external C functions
you might be testing with 8.4 will need to be recompiled.
Patch by Martin Pihlak, some editorialization by me (principally, removing
tracking of getrusage() numbers)
There are two ways to track a snapshot: there's the "registered" list, which
is used for arbitrary long-lived snapshots; and there's the "active stack",
which is used for the snapshot that is considered "active" at any time.
This also allows users of snapshots to stop worrying about snapshot memory
allocation and freeing, and about using PG_TRY blocks around ActiveSnapshot
assignment. This is all done automatically now.
As a consequence, this allows us to reset MyProc->xmin when there are no
more snapshots registered in the current backend, reducing the impact that
long-running transactions have on VACUUM.
unnecessary #include lines in it. Also, move some tuple routine prototypes and
macros to htup.h, which allows removal of heapam.h inclusion from some .c
files.
For this to work, a new header file access/sysattr.h needed to be created,
initially containing attribute numbers of system columns, for pg_dump usage.
While at it, make contrib ltree, intarray and hstore header files more
consistent with our header style.
responsible for copying the query string into the new Portal. Such copying
is unnecessary in the common code path through exec_simple_query, and in
this case it can be enormously expensive because the string might contain
a large number of individual commands; we were copying the entire, long
string for each command, resulting in O(N^2) behavior for N commands.
(This is the cause of bug #4079.) A second problem with it is that
PortalDefineQuery really can't risk error, because if it elog's before
having set up the Portal, we will leak the plancache refcount that the
caller is trying to hand off to the portal. So go back to the design in
which the caller is responsible for making sure everything is copied into
the portal if necessary.
snapmgmt.c file for the former. The header files have also been reorganized
in three parts: the most basic snapshot definitions are now in a new file
snapshot.h, and the also new snapmgmt.h keeps the definitions for snapmgmt.c.
tqual.h has been reduced to the bare minimum.
This patch is just a first step towards managing live snapshots within a
transaction; there is no functionality change.
Per my proposal to pgsql-patches on 20080318191940.GB27458@alvh.no-ip.org and
subsequent discussion.
(probably NULL) before exiting. Up to now it's just left the variable as it
set it, which means that after we're done processing the current client
message, ActiveSnapshot is probably pointing at garbage (because this function
is typically run in MessageContext which will get reset). There doesn't seem
to have been any code path in which that mattered before 8.3, but now the
plancache module might try to use the stale value if the next client message
is a Bind for a prepared statement that is in need of replanning. Per report
from Alex Hunsaker.
variables to it. More need to be converted, but I wanted to get this in
before it conflicts with too much...
Other than just centralising the text-to-int conversion for parameters,
this allows the pg_settings view to contain a list of available options
and allows an error hint to show what values are allowed.
whether to execute an immediate interrupt, rather than testing whether
LockWaitCancel() cancelled a lock wait. The old way misclassified the case
where we were blocked in ProcWaitForSignal(), and arguably would misclassify
any other future additions of new ImmediateInterruptOK states too. This
allows reverting the old kluge that gave LockWaitCancel() a return value,
since no callers care anymore. Improve comments in the various
implementations of PGSemaphoreLock() to explain that on some platforms, the
assumption that semop() exits after a signal is wrong, and so we must ensure
that the signal handler itself throws elog if we want cancel or die interrupts
to be effective. Per testing related to bug #3883, though this patch doesn't
solve those problems fully.
Perhaps this change should be back-patched, but since pre-8.3 branches aren't
really relying on autovacuum to respond to SIGINT, it doesn't seem critical
for them.
were reporting ERROR for interactive assignments and LOG for other cases,
some were saying nothing for non-interactive cases, and a few did yet other
things. Make them use a new function GUC_complaint_elevel() to establish
a reasonably uniform policy about how to report. There are still a few
edge cases such as assign_search_path(), but it's much better than before.
Per gripe from Devrim Gunduz and subsequent discussion.
As noted by Alvaro, it'd be better to fold these custom messages into the
standard "invalid parameter value" complaint from guc.c, perhaps as the DETAIL
field. However that will require more redesign than seems prudent for 8.3.
This is a relatively safe, low-impact change that we can afford to risk now.
so that we will be able to create a cookie for all processes for CSVlogs.
It is set wherever MyProcPid is set. Take the opportunity to remove the now
unnecessary session-only restriction on the %s and %c escapes in log_line_prefix.
SIGQUIT) will be recognized and processed while waiting for input,
rather than only after something has been typed. Also make SIGQUIT
do the same thing as SIGTERM in single-user mode, ie, do a normal
shutdown and exit. Since it's relatively easy to provoke SIGQUIT
from the keyboard, people may try that instead of control-D, and we'd
rather this leads to orderly shutdown. Per report from Leon Mergen
and subsequent discussion.
continue with the schedule. Change current uses of SIGINT to abort a worker
into SIGTERM, which keeps the old behaviour of terminating the process.
Patch from ITAGAKI Takahiro, with some editorializing of my own.
(which now deals only in optimizable statements), and put that code
into a new file parser/parse_utilcmd.c. This helps clarify and enforce
the design rule that utility statements shouldn't be processed during
the regular parse analysis phase; all interpretation of their meaning
should happen after they are given to ProcessUtility to execute.
(We need this because we don't retain any locks for a utility statement
that's in a plan cache, nor have any way to detect that it's stale.)
We are also able to simplify the API for parse_analyze() and related
routines, because they will now always return exactly one Query structure.
In passing, fix bug #3403 concerning trying to add a serial column to
an existing temp table (this is largely Heikki's work, but we needed
all that restructuring to make it safe).
a replan. I had originally thought this was not necessary, but the new
SPI facilities create a path whereby queries planned with non-default
options can get into the cache, so it is necessary.
access to the planner's cursor-related planning options, and provide new
FETCH/MOVE routines that allow access to the full power of those commands.
Small refactoring of planner(), pg_plan_query(), and pg_plan_queries()
APIs to make it convenient to pass the planning options down from SPI.
This is the core-code portion of Pavel Stehule's patch for scrollable
cursor support in plpgsql; I'll review and apply the plpgsql changes
separately.
of a multi-statement simple-Query message. This bug goes all the way
back, but unfortunately is not nearly so easy to fix in existing releases;
it is only the recent ProcessUtility API change that makes it fixable in
HEAD. Per report from William Garrison.
module and teach PREPARE and protocol-level prepared statements to use it.
In service of this, rearrange utility-statement processing so that parse
analysis does not assume table schemas can't change before execution for
utility statements (necessary because we don't attempt to re-acquire locks
for utility statements when reusing a stored plan). This requires some
refactoring of the ProcessUtility API, but it ends up cleaner anyway,
for instance we can get rid of the QueryContext global.
Still to do: fix up SPI and related code to use the plan cache; I'm tempted to
try to make SQL functions use it too. Also, there are at least some aspects
of system state that we want to ensure remain the same during a replan as in
the original processing; search_path certainly ought to behave that way for
instance, and perhaps there are others.
fixup various places in the tree that were clearing a StringInfo by hand.
Making this function a part of the API simplifies client code slightly,
and avoids needlessly peeking inside the StringInfo interface.
log_min_messages does; and arrange to suppress the duplicative output
that would otherwise result from log_statement and log_duration messages.
Bruce Momjian and Tom Lane.
storing mostly-redundant Query trees in prepared statements, portals, etc.
To replace Query, a new node type called PlannedStmt is inserted by the
planner at the top of a completed plan tree; this carries just the fields of
Query that are still needed at runtime. The statement lists kept in portals
etc. now consist of intermixed PlannedStmt and bare utility-statement nodes
--- no Query. This incidentally allows us to remove some fields from Query
and Plan nodes that shouldn't have been there in the first place.
Still to do: simplify the execution-time range table; at the moment the
range table passed to the executor still contains Query trees for subqueries.
initdb forced due to change of stored rules.
equal functions are checked for raw parse trees as well as post-analysis
trees. This was never very important before, but the upcoming plan cache
control module will need to be able to do copyObject() on raw parse trees.
continuously, and requests vacuum runs of "autovacuum workers" to postmaster.
The workers do the actual vacuum work. This allows for future improvements,
like allowing multiple autovacuum jobs running in parallel.
For now, the code keeps the original behavior of having a single autovac
process at any time by sleeping until the previous worker has finished.
an optarg). Add some comments noting that code in three different files has
to be kept in sync. Fix erroneous description of -S switch (it sets work_mem
not silent_mode), and do some light copy-editing elsewhere in postgres-ref.
Windows), arrange for each postmaster child process to be its own process
group leader, and deliver signals SIGINT, SIGTERM, SIGQUIT to the whole
process group not only the direct child process. This provides saner behavior
for archive and recovery scripts; in particular, it's possible to shut down a
warm-standby recovery server using "pg_ctl stop -m immediate", since delivery
of SIGQUIT to the startup subprocess will result in killing the waiting
recovery_command. Also, this makes Query Cancel and statement_timeout apply
to scripts being run from backends via system(). (There is no support in the
core backend for that, but it's widely done using untrusted PLs.) Per gripe
from Stephen Harris and subsequent discussion.
promoted to FATAL) end in exit(1) not exit(0). Then change the postmaster to
allow exit(1) without a system-wide panic, but not for the startup subprocess
or the bgwriter. There were a couple of places that were using exit(1) to
deliberately force a system-wide panic; adjust these to be exit(2) instead.
This fixes the problem noted back in July that if the startup process exits
with elog(ERROR), the postmaster would think everything is hunky-dory and
proceed to start up. Alternative solutions such as trying to run the entire
startup process as a critical section seem less clean, primarily because of
the fact that a fair amount of startup code is shared by all postmaster
children in the EXEC_BACKEND case. We'd need an ugly special case somewhere
near the head of main.c to make it work if it's the child process's
responsibility to determine what happens; and what's the point when the
postmaster already treats different children differently?
if available (which it usually should be), during processing of Bind
and Execute protocol messages. This improves usefulness of
log_min_error_statement logging for extended query protocol.
