When I committed d0d44049d (Account for optimized MinMax aggregates
during SS_finalize_plan), I didn't have a test case showing that it
was fixing any reachable bug. Here is one, based on bug #18465 from
Hal Takahara. Without the fix, all rows of the result show the same
"min" value, because the aggregate doesn't get recalculated.
Committed despite beta1 release freeze, with the concurrence of
pgsql-release.
Discussion: https://postgr.es/m/18465-2fae927718976b22@postgresql.org
Discussion: https://postgr.es/m/2391880.1689025003@sss.pgh.pa.us
In commit da256a4a7, I manually added some typedef names to the
buildfarm-generated list so as not to cause any formatting regressions
compared to the prior manually-updated list.
About half of the additions were injection-point-related names.
It turns out that those were missing because none of the buildfarm
animals contributing typedef lists were building with
--enable-injection-points. I rectified that on my animal sifaka,
and now those are in the list available from the buildfarm.
The other half were typedefs that didn't show up in the generated list
because our method for collecting that doesn't catch names that are
not used to declare any C variables or fields. Such a typedef name
doesn't really add a lot of value, so we decided to get rid of them,
and that's now been done in commits 110eb4aef and be5942aee. (Note:
I'm pretty sure there are some remaining cases of that, but we've
already accepted the ensuing odd formatting of the typedef declaration
itself. The present fixes only dealt with typedefs that had been
manually added to typedefs.list during the v17 development cycle.)
Hence, we can now install a verbatim copy of the buildfarm's list
and not have it affect anything. The only change is to add
InjectionPointCallback, which I'd omitted from da256a4a7 because
it chanced not to affect any pgindent decisions.
Discussion: https://postgr.es/m/1919000.1715815925@sss.pgh.pa.us
After further review, we want to move in the direction of always
quoting GUC names in error messages, rather than the previous (PG16)
wildly mixed practice or the intermittent (mid-PG17) idea of doing
this depending on how possibly confusing the GUC name is.
This commit applies appropriate quotes to (almost?) all mentions of
GUC names in error messages. It partially supersedes a243569bf65 and
8d9978a7176, which had moved things a bit in the opposite direction
but which then were abandoned in a partial state.
Author: Peter Smith <smithpb2250@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/CAHut%2BPv-kSN8SkxSdoHano_wPubqcg5789ejhCDZAcLFceBR-w%40mail.gmail.com
There were a few typedefs that were never used to define a variable or
field. This had the effect that the buildfarm's typedefs.list would
not include them, and so they would need to be re-added manually to
keep the overall pgindent result perfectly clean.
We can easily get rid of these typedefs to avoid the issue. In a few
cases, we just let the enum or struct stand on its own without a
typedef around it. In one case, an enum was abused to define flag
bits; that's better done with macro definitions.
This fixes all the remaining issues with missing entries in the
buildfarm's typedefs.list.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/1919000.1715815925@sss.pgh.pa.us
This enum was used to determine the first ID to use when assigning a
custom wait event for extensions, which is always 1. It was kept so
as it would be possible to add new in-core wait events in the category
"Extension". There is no such thing currently, so let's remove this
enum until a case justifying it pops up. This makes the code simpler
and easier to understand.
This has as effect to switch back autoprewarm.c to use PG_WAIT_EXTENSION
rather than WAIT_EVENT_EXTENSION, on par with v16 and older stable
branches.
Thinko in c9af05465307.
Reported-by: Peter Eisentraut
Discussion: https://postgr.es/m/195c6c45-abce-4331-be6a-e87724e1d060@eisentraut.org
Specifically, it terminates a background worker even if the caller
couldn't terminate the background worker with pg_terminate_backend().
Commit 3a9b18b3095366cd0c4305441d426d04572d88c1 neglected to update
this. Back-patch to v13, which introduced DROP DATABASE FORCE.
Reviewed by Amit Kapila. Reported by Kirill Reshke.
Discussion: https://postgr.es/m/20240429212756.60.nmisch@google.com
04e72ed617be pushed the skip fetch optimization (allowing bitmap heap
scans to operate like index-only scans if none of the underlying data is
needed) into heap AM implementations of bitmap table scan callbacks.
04e72ed617be added an assert that all tuples in blocks eligible for the
optimization had been NULL-filled and emitted by the end of the scan.
This assert is incorrect when not all tuples need be scanned to execute
the query; for example: a join in which not all inner tuples need to be
scanned before skipping to the next outer tuple.
Remove the assert and reset the field on which it previously asserted to
avoid incorrectly emitting NULL-filled tuples from a previous scan on
rescan.
Author: Melanie Plageman
Reviewed-by: Tomas Vondra, Michael Paquier, Alvaro Herrera
Reported-by: Melanie Plageman
Reproduced-by: Tomas Vondra, Richard Guo
Discussion: https://postgr.es/m/CAMbWs48orzZVXa7-vP9Nt7vQWLTE04Qy4PePaLQYsVNQgo6qRg%40mail.gmail.com
There were three problems with the sslnegotiation options:
1. The sslmode=prefer and sslnegotiation=requiredirect combination was
somewhat dangerous, as you might unintentionally fall back to
plaintext authentication when connecting to a pre-v17 server.
2. There was an asymmetry between 'postgres' and 'direct'
options. 'postgres' meant "try only traditional negotiation", while
'direct' meant "try direct first, and fall back to traditional
negotiation if it fails". That was apparent only if you knew that the
'requiredirect' mode also exists.
3. The "require" word in 'requiredirect' suggests that it's somehow
more strict or more secure, similar to sslmode. However, I don't
consider direct SSL connections to be a security feature.
To address these problems:
- Only allow sslnegotiation='direct' if sslmode='require' or
stronger. And for the record, Jacob and Robert felt that we should do
that (or have sslnegotiation='direct' imply sslmode='require') anyway,
regardless of the first issue.
- Remove the 'direct' mode that falls back to traditional negotiation,
and rename what was called 'requiredirect' to 'direct' instead. In
other words, there is no "try both methods" option anymore, 'postgres'
now means the traditional negotiation and 'direct' means a direct SSL
connection.
Reviewed-by: Jelte Fennema-Nio, Robert Haas, Jacob Champion
Discussion: https://www.postgresql.org/message-id/d3b1608a-a1b6-4eda-9ec5-ddb3e4375808%40iki.fi
The CREATE SUBSCRIPTION documentation mentions "false" is the default
option, so let's use true|false rather than on|off in the text which
talks about this option in the ALTER SUBSCRIPTION page.
The other boolean options mentioned in create_subscription.sgml use true
and false so it makes sense to be consistent with these. The "failover"
option is new to v17.
Author: Peter Smith
Discussion: https://postgr.es/m/CAHut+Ps-RqrggaJU5w85BbeQzw9CLmmLgADVJoJ=xx_4D5CWvw@mail.gmail.com
This feature set did not handle empty ranges correctly, and it's now
too late for PostgreSQL 17 to fix it.
The following commits are reverted:
6db4598fcb8 Add stratnum GiST support function
46a0cd4cefb Add temporal PRIMARY KEY and UNIQUE constraints
86232a49a43 Fix comment on gist_stratnum_btree
030e10ff1a3 Rename pg_constraint.conwithoutoverlaps to conperiod
a88c800deb6 Use daterange and YMD in without_overlaps tests instead of tsrange.
5577a71fb0c Use half-open interval notation in without_overlaps tests
34768ee3616 Add temporal FOREIGN KEY contraints
482e108cd38 Add test for REPLICA IDENTITY with a temporal key
c3db1f30cba doc: clarify PERIOD and WITHOUT OVERLAPS in CREATE TABLE
144c2ce0cc7 Fix ON CONFLICT DO NOTHING/UPDATE for temporal indexes
Discussion: https://www.postgresql.org/message-id/d0b64a7a-dfe4-4b84-a906-c7dedfa40a3e@eisentraut.org
Previously we searched for llvm-config-N and clang-N as well as the
unversioned names, and maintained a list of expected values of N. There
doesn't seem to be any reason to think that the default llvm-config and
clang won't be good enough, and if they aren't, they can be overridden
with LLVM_CONFIG and CLANG, so let's stop maintaining that list.
The list had not been updated since LLVM 7 with no complaints, so commit
820b5af73dc probably should have just removed it when dropping support
for 7, instead of trying to be helpful by bringing it up to date with
recent version numbers.
The Meson build system didn't have that, so no change there.
Suggested-by: Peter Eisentraut <peter@eisentraut.org>
Discussion: https://postgr.es/m/CA%2BhUKG%2BSOP-aR%3DYF_n0dtXGWeCy6x%2BCn-RMWURU5ySQdmeKW1Q%40mail.gmail.com
06286709e added a SERIALIZE option to EXPLAIN which included showing the
amount of kilobytes serialized. The calculation to convert bytes into
kilobytes wasn't consistent with how that's done in the rest of EXPLAIN.
Traditionally we round up to the nearest kB, but the new code rounded to
the nearest kB.
To fix this, invent a macro that does the conversion and use that macro
everywhere that requires this conversion.
Additionally, 5de890e36 added EXPLAIN (MEMORY) but included the memory
sizes in bytes. Convert these values to kilobytes to align with the
other memory related outputs.
In passing, swap out a "long" type in show_hash_info() and use a uint64
instead. We do support platforms where sizeof(Size) == 8 and
sizeof(long) == 4, so using a long there is questionable.
Reported-by: jian he
Reviewed-by: jian he
Discussion: https://www.postgresql.org/message-id/CACJufxE4Sp7xvgOwhqtFx5hS85AxMKobPWDo-xZHZVTpK3EBjA@mail.gmail.com
postgres --name=value and -c name=value are equivalents. This commit
expands the documentation of libpq's "option" connection parameter and
the server startup sequence for shell interactions to mention both
rather than only -c.
Extracted from a larger patch by the same authors.
Reported-by: Alexey Palazhchenko
Author: David Johnston, Aleksander Alekseev
Reviewed-by: Nathan Bossart, Peter Eisentraut, Álvaro Herrera
Discussion: https://postgr.es/m/CAJ7c6TMkuLiLfrA+EFCPYfhXoMKRxxssB5c86+ibxfaz6+=Sdg@mail.gmail.com
This README explains how to run pgindent, but it was written
for our former practice of running pgindent only infrequently.
Nowadays the plan is to keep the tree indent-clean all the time,
so the typical thing is to do an incremental pgindent run with
each commit. Revise to explain that as the normal case, and
the infrequent full-on process as a separate thing.
For now, pgperltidy is still a run-it-infrequently item.
9a974cbcba00 moved the query in binary_upgrade_set_pg_class_oids to the
outer level, but left the PQclear and query buffer destruction in the
is_index conditional. 353708e1fb2d fixed the leak of the query buffer
but left the PGresult leak. This moves clearing the result to the outer
level ensuring that it will be called.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/374550C1-F4ED-4D9D-9498-0FD029CCF674@yesql.se
Backpatch-through: v15
Underscores were added to numeric literals in faff8f8e47. This change
also affected the positional parameters (e.g., $1) rule, which uses
the same production for its digits. But this did not actually work,
because the digits for parameters are processed using atol(), which
does not handle underscores and ignores whatever it cannot parse.
The underscores notation is probably not useful for positional
parameters, so for simplicity revert that rule to its old form that
only accepts digits 0-9.
Author: Erik Wienhold <ewie@ewie.name>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://www.postgresql.org/message-id/flat/5d216d1c-91f6-4cbe-95e2-b4cbd930520c%40ewie.name
One is about subqueries becoming joins and the other is about optimizing
LIMIT by improving startup cost.
Reported-by: Andy Fan
Discussion: https://postgr.es/m/87h6f4ncc6.fsf@163.com
Reviewed-by: David Rowley
Backpatch-through: master
Most of the infrastructure for procedure arguments was already
okay with polymorphic output arguments, but it turns out that
CallStmtResultDesc() was a few bricks shy of a load here. It thought
all it needed to do was call build_function_result_tupdesc_t, but
that function specifically disclaims responsibility for resolving
polymorphic arguments. Failing to handle that doesn't seem to be
a problem for CALL in plpgsql, but CALL from plain SQL would get
errors like "cannot display a value of type anyelement", or even
crash outright.
In v14 and later we can simply examine the exposed types of the
CallStmt.outargs nodes to get the right type OIDs. But it's a lot
more complicated to fix in v12/v13, because those versions don't
have CallStmt.outargs, nor do they do expand_function_arguments
until ExecuteCallStmt runs. We have to duplicatively run
expand_function_arguments, and then re-determine which elements
of the args list are output arguments.
Per bug #18463 from Drew Kimball. Back-patch to all supported
versions, since it's busted in all of them.
Discussion: https://postgr.es/m/18463-f8cd77e12564d8a2@postgresql.org
Run renumber_oids.pl to move high-numbered OIDs down, as per pre-beta
tasks specified by RELEASE_CHANGES. For reference, the command was
./renumber_oids.pl --first-mapped-oid 8000 --target-oid 6300
Run pgindent, pgperltidy, and reformat-dat-files.
The pgindent part of this is pretty small, consisting mainly of
fixing up self-inflicted formatting damage from patches that
hadn't bothered to add their new typedefs to typedefs.list.
In order to keep it from making anything worse, I manually added
a dozen or so typedefs that appeared in the existing typedefs.list
but not in the buildfarm's list. Perhaps we should formalize that,
or better find a way to get those typedefs into the automatic list.
pgperltidy is as opinionated as always, and reformat-dat-files too.
Commit d6607016c7 moved all the jsonapi.c error messages into
token_error(). This needs to be added to the various nls.mk files
that use this. Since that makes token_error() effectively a globally
known symbol, the name seems a bit too general, so rename to
json_token_error() for more clarity.
When --auth was added to initdb in commit e7029b212755 it had support
for auth options separated by space from the auth type, like:
--auth pam <servicename>
--auth ident sameuser
Passing an option to the ident auth type was removed in 01c1a12a5bb4
which left the pam auth-options support in place. 8a02339e9ba3 broke
this by inverting a calculation in the strncmp arguments, which went
unnoticed for a long time. The ability to pass options to the auth
type was never documented.
Rather than fixing the support for an undocumented feature which has
been broken for all supported versions, and which only supports one
out of many auth types which can take options, it is removed.
Reported-by: Jingxian Li <aqktjcm@qq.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Aleksander Alekseev <aleksander@timescale.com>
Discussion: https://postgr.es/m/tencent_29731C7C7E6A2F9FB807C3A1DC3D81293C06@qq.com
When loglevel is set to LOG, allocated strings used in the error
message would leak. Fix by explicitly pfreeing them.
Author: Ranier Vilela <ranier.vf@gmail.com>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/CAEudQAqMeE0AHcOsOzZx51Z0eiFJAjhBPRFt+Bxi3ETXWen7ig@mail.gmail.com
1db689715 added debugging output to the partition_prune regression test
to help us figure out why buildfarm member Parula was occasionally
failing.
We've not seen any failures in around 4 weeks and the best guess as to
what the problem was is a compiler bug. Since there are no recent
failures, there's now no need to keep this debugging code, so revert it.
Discussion: https://postgr.es/m/CAApHDvqyLF881EvDtXT=ossa0i4ioJBtW2c0Wbouzt5d3HDb5Q@mail.gmail.com
