1df5875 has changed the way dependencies are dropped for this command
with inheritance trees, which impacts sepgsql. This just updates the
regression test output to take care of the failures and adapt to the new
code.
Reported by buildfarm member rhinoceros.
Author: Michael Paquier
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/20191013101331.GC1434@paquier.xyz
Backpatch-through: 12
In-core relation options can use a custom lock mode since 47167b7, that
has lowered the lock available for some autovacuum parameters. However
it forgot to consider custom relation options. This causes failures
with ALTER TABLE SET when changing a custom relation option, as its lock
is not defined. The existing APIs to define a custom reloption does not
allow to define a custom lock mode, so enforce its initialization to
AccessExclusiveMode which should be safe enough in all cases. An
upcoming patch will extend the existing APIs to allow a custom lock mode
to be defined.
The problem can be reproduced with bloom indexes, so add a test there.
Reported-by: Nikolay Sharplov
Analyzed-by: Thomas Munro, Michael Paquier
Author: Michael Paquier
Reviewed-by: Kuntal Ghosh
Discussion: https://postgr.es/m/20190920013831.GD1844@paquier.xyz
Backpatch-through: 9.6
contrib/amcheck failed to consider the possibility that unlogged
relations will not have any main relation fork files when running in hot
standby mode. This led to low-level "can't happen" errors that complain
about the absence of a relfilenode file.
To fix, simply skip verification of unlogged index relations during
recovery. In passing, add a direct check for the presence of a main
fork just before verification proper begins, so that we cleanly verify
the presence of the main relation fork file.
Author: Andrey Borodin, Peter Geoghegan
Reported-By: Andrey Borodin
Diagnosed-By: Andrey Borodin
Discussion: https://postgr.es/m/DA9B33AC-53CB-4643-96D4-7A0BBC037FA1@yandex-team.ru
Backpatch: 10-, where amcheck was introduced.
contrib/intarray considers "arraycol <@ constant-array" to be indexable,
but its GiST opclass code fails to reliably find index entries for empty
array values (which of course should trivially match such queries).
This is because the test condition to see whether we should descend
through a non-leaf node is wrong.
Unfortunately, empty array entries could be anywhere in the index,
as these index opclasses are currently designed. So there's no way
to fix this except by lobotomizing <@ indexscans to scan the whole
index ... which is what this patch does. That's pretty unfortunate:
the performance is now actually worse than a seqscan, in most cases.
We'd be better off to remove <@ from the GiST opclasses entirely,
and perhaps a future non-back-patchable patch will do so.
In the meantime, applications whose performance is adversely impacted
have a couple of options. They could switch to a GIN index, which
doesn't have this bug, or they could replace "arraycol <@ constant-array"
with "arraycol <@ constant-array AND arraycol && constant-array".
That will provide about the same performance as before, and it will find
all non-empty subsets of the given constant-array, which is all that
could reliably be expected of the query before.
While at it, add some more regression test cases to improve code
coverage of contrib/intarray.
In passing, adjust resize_intArrayType so that when it's returning an
empty array, it uses construct_empty_array for that rather than
cowboy hacking on the input array. While the hack produces an array
that looks valid for most purposes, it isn't bitwise equal to empty
arrays produced by other code paths, which could have subtle odd
effects. I don't think this code path is performance-critical
enough to justify such shortcuts. (Back-patch this part only as far
as v11; before commit 01783ac36 we were not careful about this in
other intarray code paths either.)
Back-patch the <@ fixes to all supported versions, since this was
broken from day one.
Patch by me; thanks to Alexander Korotkov for review.
Discussion: https://postgr.es/m/458.1565114141@sss.pgh.pa.us
Perl has multiple internal representations of "undef", and just
testing for SvTYPE(x) == SVt_NULL doesn't recognize all of them,
leading to "cannot transform this Perl type to jsonb" errors.
Use the approved test SvOK() instead.
Report and patch by Ivan Panchenko. Back-patch to v11 where
this module was added.
Discussion: https://postgr.es/m/1564783533.324795401@f193.i.mail.ru
When piling up loading of modules using check_password_hook_type,
loading passwordcheck would remove any trace of a previously-loaded
hook. Unloading the module would also cause previous hooks to be
entirely gone.
Reported-by: Rafael Castro
Author: Michael Paquier
Reviewed-by: Daniel Gustafsson
Discussion: https://postgr.es/m/15932-78f48f9ef166778c@postgresql.org
Backpatch-through: 9.4
As of Fedora 30, it seems that the system-provided macros for setting
up user privileges in SELinux policies don't grant the ability to read
/etc/passwd, as they formerly did. This restriction breaks psql
(which tries to use getpwuid() to obtain the user name it's running
under) and thereby the contrib/sepgsql regression test. Add explicit
specifications that we need the right to read /etc/passwd.
Mike Palmiotto, per a report from me. Back-patch to all supported
branches.
Discussion: https://postgr.es/m/23856.1563381159@sss.pgh.pa.us
Solely relying on a relation's reltuples/relpages estimate to size the
Bloom filters used by amcheck verification makes verification less
effective when the estimates are very stale. In extreme cases,
verification options that use Bloom filters internally could be totally
ineffective, without users receiving any clear indication that certain
types of corruption might easily be missed.
To fix, use RelationGetNumberOfBlocks() instead of relpages to size the
downlink block Bloom filter. Use the same RelationGetNumberOfBlocks()
value to derive a minimum size for the heapallindexed Bloom filter,
rather than completely trusting reltuples. Verification will still be
reasonably effective when the projected/estimated number of Bloom filter
elements is at least 1/5 of the final number of elements, which is
assured by the new sizing logic.
Reported-By: Alexander Korotkov
Discussion: https://postgr.es/m/CAH2-Wzk0ke2J42KrNYBKu0Xovjy-sU5ub7PWjgpbsKdAQcL4OA@mail.gmail.com
Backpatch: 11-, where downlink/heapallindexed verification were added.
In commit 18555b132 we tentatively established a rule that regression
tests should use names containing "regression" for databases, and names
starting with "regress_" for all other globally-visible object names, so
as to circumscribe the side-effects that "make installcheck" could have on
an existing installation. However, no enforcement mechanism was created,
so it's unsurprising that some new violations have crept in since then.
In fact, a whole new *category* of violations has crept in, to wit we now
also have globally-visible subscription and replication origin names, and
"make installcheck" could very easily clobber user-created objects of
those types. So it's past time to do something about this.
This commit sanitizes the tests enough that they will pass (i.e. not
generate any visible warnings) with the enforcement mechanism I'll add
in the next commit. There are some TAP tests that still trigger the
warnings, but the warnings do not cause test failure. Since these tests
do not actually run against a pre-existing installation, there's no need
to worry whether they could conflict with user-created objects.
The problem with rolenames.sql testing special role names like "user"
is still there, and is dealt with only very cosmetically in this patch
(by hiding the warnings :-(). What we actually need to do to be safe is
to take that test script out of "make installcheck" altogether, but that
seems like material for a separate patch.
Discussion: https://postgr.es/m/16638.1468620817@sss.pgh.pa.us
Commit aa09cd242 modified estimate_path_cost_size() so that it reuses
cached costs of a basic foreign path for a given foreign-base/join
relation when costing pre-sorted foreign paths for that relation, but it
incorrectly re-computed retrieved_rows, an estimated number of rows
fetched from the remote side, which is needed for costing both the basic
and pre-sorted foreign paths. To fix, handle retrieved_rows the same way
as the cached costs: store in that relation's fpinfo the retrieved_rows
estimate computed for costing the basic foreign path, and reuse it when
costing the pre-sorted foreign paths. Also, reuse the rows/width
estimates stored in that relation's fpinfo when costing the pre-sorted
foreign paths, to make the code consistent.
In commit ffab494a4, to extend the costing mentioned above to the
foreign-grouping case, I made a change to add_foreign_grouping_paths() to
store in a given foreign-grouped relation's RelOptInfo the rows estimate
for that relation for reuse, but this patch makes that change unnecessary
since we already store the row estimate in that relation's fpinfo, which
this patch reuses when costing a foreign path for that relation with the
sortClause ordering; remove that change.
In passing, fix thinko in commit 7012b132d: in estimate_path_cost_size(),
the width estimate for a given foreign-grouped relation to be stored in
that relation's fpinfo was reset incorrectly when costing a basic foreign
path for that relation with local stats.
Apply the patch to HEAD only to avoid destabilizing existing plan choices.
Author: Etsuro Fujita
Discussion: https://postgr.es/m/CAPmGK17jaJLPDEkgnP2VmkOg=5wT8YQ1CqssU8JRpZ_NSE+dqQ@mail.gmail.com
Previously, in postgresPlanForeignModify, we planned an UPDATE operation
on a foreign table so that we transmit only columns that were explicitly
targets of the UPDATE, so as to avoid unnecessary data transmission, but
if there were BEFORE ROW UPDATE triggers on the foreign table, those
triggers might change values for non-target columns, in which case we
would miss sending changed values for those columns. Prevent optimizing
away transmitting all columns if there are BEFORE ROW UPDATE triggers on
the foreign table.
This is an oversight in commit 7cbe57c34 which added triggers on foreign
tables, so apply the patch all the way back to 9.4 where that came in.
Author: Shohei Mochizuki
Reviewed-by: Amit Langote
Discussion: https://postgr.es/m/201905270152.x4R1q3qi014550@toshiba.co.jp
Descriptions of pg_trgm GUC options have % replaced with %% like it was
a printf-like format. But that's not needed since they are just plain strings.
This commit fixed that. Backpatch to last supported version since this error
present from the beginning.
Reported-by: Masahiko Sawada
Discussion: https://postgr.es/m/CAD21AoAgPKODUsu9gqUFiNqEOAqedStxJ-a0sapsJXWWAVp%3Dxg%40mail.gmail.com
Backpatch-through: 9.4
It's harmless to call PQfreemem() with a NULL argument, so the only
consequence was that if allocating 'schema' failed, but allocating 'table'
or 'field' succeeded, we would leak a bit of memory. That's highly
unlikely to happen, so this is just academical, but let's get it right.
Per bug #15838 from Timur Birsh. Backpatch back to 9.5, where the
PQfreemem() calls were introduced.
Discussion: https://www.postgresql.org/message-id/15838-3221652c72c5e69d@postgresql.org
A parallel worker process should not be making any decisions of its
own about whether to auto-explain. If the parent session process
passed down flags asking for instrumentation data, do that, otherwise
not. Trying to enable instrumentation anyway leads to bugs like the
"could not find key N in shm TOC" failure reported in bug #15821
from Christian Hofstaedtler.
We can implement this cheaply by piggybacking on the existing logic
for not doing anything when we've chosen not to sample a statement.
While at it, clean up some tin-eared coding related to the sampling
feature, including an off-by-one error that meant that asking for 1.0
sampling rate didn't actually result in sampling every statement.
Although the specific case reported here only manifested in >= v11,
I believe that related misbehaviors can be demonstrated in any version
that has parallel query; and the off-by-one error is certainly there
back to 9.6 where that feature was added. So back-patch to 9.6.
Discussion: https://postgr.es/m/15821-5eb422e980594075@postgresql.org
Perl likes to redefine the _() macro:
#ifdef CAN_PROTOTYPE
#define _(args) args
#else ...
There was lots not to like about the way we dealt with this before:
1. Instead of taking care of the conflict centrally in plperl.h, we
expected every one of its ever-growing number of includers to do so.
This is duplicative and error-prone in itself, plus it means that
plperl.h fails to meet the expectation of being compilable standalone,
resulting in macro-redefinition warnings in cpluspluscheck.
2. We left _() with its Perl definition, meaning that if someone tried
to use it in any Perl-related extension, it would silently fail to
provide run-time translation. I don't see any live bugs of this ilk,
but it's clearly a hard-to-notice bug waiting to happen.
So fix that by centralizing the cleanup logic, making it match what
we're already doing for other macro conflicts with Perl. Since we only
expect plperl.h to be included by extensions not core code, we should
redefine _() as dgettext() not gettext().
This is still using the 2.0 version of pg_bsd_indent.
I thought it would be good to commit this separately,
so as to document the differences between 2.0 and 2.1 behavior.
Discussion: https://postgr.es/m/16296.1558103386@sss.pgh.pa.us
75445c1 has caused various failures in tests across the tree after
updating some error messages, so fix the newly-expected output.
Author: Michael Paquier
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/8332.1558048838@sss.pgh.pa.us
The term "item pointer" should not be used to refer to ItemIdData
variables, since that is needlessly ambiguous. Only
ItemPointerData/ItemPointer variables should be called item pointers.
To fix, establish the convention that ItemIdData variables should always
be referred to either as "item identifiers" or "line pointers". The
term "item identifier" already predominates in docs and translatable
messages, and so should be the preferred alternative there.
Discussion: https://postgr.es/m/CAH2-Wz=c=MZQjUzde3o9+2PLAPuHTpVZPPdYxN=E4ndQ2--8ew@mail.gmail.com
In commit 7012b132d0, which added support for aggregate pushdown in
postgres_fdw, the expense of evaluating the final scan/join target
computed by make_group_input_target() was not accounted for at all in
costing aggregate pushdown paths with local statistics. The right fix
for this would be to have a separate upper stage to adjust the final
scan/join relation (see comments for apply_scanjoin_target_to_paths());
but for now, fix by adding the tlist eval cost when costing aggregate
pushdown paths with local statistics.
Apply this to HEAD only to avoid destabilizing existing plan choices.
Author: Etsuro Fujita
Reviewed-By: Antonin Houska
Discussion: https://postgr.es/m/5C66A056.60007%40lab.ntt.co.jp
The right way for IsCatalogRelation/Class to behave is to return true
for OIDs less than FirstBootstrapObjectId (not FirstNormalObjectId),
without any of the ad-hoc fooling around with schema membership.
The previous code was wrong because (1) it claimed that
information_schema tables were not catalog relations but their toast
tables were, which is silly; and (2) if you dropped and recreated
information_schema, which is a supported operation, the behavior
changed. That's even sillier. With this definition, "catalog
relations" are exactly the ones traceable to the postgres.bki data,
which seems like what we want.
With this simplification, we don't actually need access to the pg_class
tuple to identify a catalog relation; we only need its OID. Hence,
replace IsCatalogClass with "IsCatalogRelationOid(oid)". But keep
IsCatalogRelation as a convenience function.
This allows fixing some arguably-wrong semantics in contrib/sepgsql and
ReindexRelationConcurrently, which were using an IsSystemNamespace test
where what they really should be using is IsCatalogRelationOid. The
previous coding failed to protect toast tables of system catalogs, and
also was not on board with the general principle that user-created tables
do not become catalogs just by virtue of being renamed into pg_catalog.
We can also get rid of a messy hack in ReindexMultipleTables.
While we're at it, also rename IsSystemNamespace to IsCatalogNamespace,
because the previous name invited confusion with the more expansive
semantics used by IsSystemRelation/Class.
Also improve the comments in catalog.c.
There are a few remaining places in replication-related code that are
special-casing OIDs below FirstNormalObjectId. I'm inclined to think
those are wrong too, and if there should be any special case it should
just extend to FirstBootstrapObjectId. But first we need to debate
whether a FOR ALL TABLES publication should include information_schema.
Discussion: https://postgr.es/m/21697.1557092753@sss.pgh.pa.us
Discussion: https://postgr.es/m/15150.1557257111@sss.pgh.pa.us
This feature was using a process local map to track the first few blocks
in the relation. The map was reset each time we get the block with enough
freespace. It was discussed that it would be better to track this map on
a per-relation basis in relcache and then invalidate the same whenever
vacuum frees up some space in the page or when FSM is created. The new
design would be better both in terms of API design and performance.
List of commits reverted, in reverse chronological order:
06c8a5090e Improve code comments in b0eaa4c51b.
13e8643bfc During pg_upgrade, conditionally skip transfer of FSMs.
6f918159a9 Add more tests for FSM.
9c32e4c350 Clear the local map when not used.
29d108cdec Update the documentation for FSM behavior..
08ecdfe7e5 Make FSM test portable.
b0eaa4c51b Avoid creation of the free space map for small heap relations.
Discussion: https://postgr.es/m/20190416180452.3pm6uegx54iitbt5@alap3.anarazel.de
When reindexing individual indexes on pg_class it was possible to
either trigger an assertion failure:
TRAP: FailedAssertion("!(!ReindexIsProcessingIndex(((index)->rd_id)))
That's because reindex_index() called SetReindexProcessing() - which
enables an asserts ensuring no index insertions happen into the index
- before calling RelationSetNewRelfilenode(). That not correct for
indexes on pg_class, because RelationSetNewRelfilenode() updates the
relevant pg_class row, which needs to update the indexes.
The are two reasons this wasn't noticed earlier. Firstly the bug
doesn't trigger when reindexing all of pg_class, as reindex_relation
has code "hiding" all yet-to-be-reindexed indexes. Secondly, the bug
only triggers when the the update to pg_class doesn't turn out to be a
HOT update - otherwise there's no index insertion to trigger the
bug. Most of the time there's enough space, making this bug hard to
trigger.
To fix, move RelationSetNewRelfilenode() to before the
SetReindexProcessing() (and, together with some other code, to outside
of the PG_TRY()).
To make sure the error checking intended by SetReindexProcessing() is
more robust, modify CatalogIndexInsert() to check
ReindexIsProcessingIndex() even when the update is a HOT update.
Also add a few regression tests for REINDEXing of system catalogs.
The last two improvements would have prevented some of the issues
fixed in 5c1560606dc4c from being introduced in the first place.
Reported-By: Michael Paquier
Diagnosed-By: Tom Lane and Andres Freund
Author: Andres Freund
Reviewed-By: Tom Lane
Discussion: https://postgr.es/m/20190418011430.GA19133@paquier.xyz
Backpatch: 9.4-, the bug is present in all branches
foreign_grouping_ok() is willing to put fairly arbitrary expressions into
the targetlist of a remote SELECT that's doing grouping or aggregation on
the remote side, including expressions that have no foreign component to
them at all. This is possibly a bit dubious from an efficiency standpoint;
but it rises to the level of a crash-causing bug if the expression is just
a Param or non-foreign Var. In that case, the expression will necessarily
also appear in the fdw_exprs list of values we need to send to the remote
server, and then setrefs.c's set_foreignscan_references will mistakenly
replace the fdw_exprs entry with a Var referencing the targetlist result.
The root cause of this problem is bad design in commit e7cb7ee14: it put
logic into set_foreignscan_references that IMV is postgres_fdw-specific,
and yet this bug shows that it isn't postgres_fdw-specific enough. The
transformation being done on fdw_exprs assumes that fdw_exprs is to be
evaluated with the fdw_scan_tlist as input, which is not how postgres_fdw
uses it; yet it could be the right thing for some other FDW. (In the
bigger picture, setrefs.c has no business assuming this for the other
expression fields of a ForeignScan either.)
The right fix therefore would be to expand the FDW API so that the
FDW could inform setrefs.c how it intends to evaluate these various
expressions. We can't change that in the back branches though, and we
also can't just summarily change setrefs.c's behavior there, or we're
likely to break external FDWs.
As a stopgap, therefore, hack up postgres_fdw so that it won't attempt
to send targetlist entries that look exactly like the fdw_exprs entries
they'd produce. In most cases this actually produces a superior plan,
IMO, with less data needing to be transmitted and returned; so we probably
ought to think harder about whether we should ship tlist expressions at
all when they don't contain any foreign Vars or Aggs. But that's an
optimization not a bug fix so I left it for later. One case where this
produces an inferior plan is where the expression in question is actually
a GROUP BY expression: then the restriction prevents us from using remote
grouping. It might be possible to work around that (since that would
reduce to group-by-a-constant on the remote side); but it seems like a
pretty unlikely corner case, so I'm not sure it's worth expending effort
solely to improve that. In any case the right long-term answer is to fix
the API as sketched above, and then revert this hack.
Per bug #15781 from Sean Johnston. Back-patch to v10 where the problem
was introduced.
Discussion: https://postgr.es/m/15781-2601b1002bad087c@postgresql.org
Adopt a more defensive approach to accessing index tuples in
contrib/amcheck: verify that each line pointer looks sane before
accessing associated tuple using pointer arithmetic based on line
pointer's offset. This avoids undefined behavior and assertion failures
in cases where line pointers are corrupt.
Issue spotted following a complaint about an assertion failure by
Grigory Smolkin, which involved a test harness that deliberately
corrupts indexes.
This is arguably a bugfix, but no backpatch given the lack of field
reports beyond Grigory's.
Discussion: https://postgr.es/m/CAH2-WzmkurhCqnyLHxk0VkOZqd49+ZZsp1xAJOg7j2x7dmp_XQ@mail.gmail.com
Commit 3d956d9562 added support for update row movement in postgres_fdw.
This patch fixes the following issues introduced by that commit:
* When a remote partition chosen to insert routed rows into was also an
UPDATE subplan target rel that would be updated later, the UPDATE that
used a direct modification plan modified those routed rows incorrectly
because those routed rows were visible to the later UPDATE command.
The right fix for this would be to have some way in postgres_fdw in
which the later UPDATE command ignores those routed rows, but it seems
hard to do so with the current infrastructure. For now throw an error
in that case.
* When a remote partition chosen to insert routed rows into was also an
UPDATE subplan target rel, fmstate created for the UPDATE that used a
non-direct modification plan was mistakenly overridden by another
fmstate created for inserting those routed rows into the partition.
This caused 1) server crash when the partition would be updated later,
and 2) resource leak when the partition had been already updated. To
avoid that, adjust the treatment of the fmstate for the inserting. As
for #1, since we would also have the incorrectness issue as mentioned
above, error out in that case as well.
Update the docs to mention that postgres_fdw currently does not handle
the case where a remote partition chosen to insert a routed row into is
also an UPDATE subplan target rel that will be updated later.
Author: Amit Langote and Etsuro Fujita
Reviewed-by: Amit Langote
Backpatch-through: 11 where row movement in postgres_fdw was added
Discussion: https://postgr.es/m/21e7eaa4-0d4d-20c2-a1f7-c7e96f4ce440@lab.ntt.co.jp
As reported by Tom, when ExecStoreMinimalTuple() had to perform a
conversion to store the minimal tuple in the slot, it forgot to
respect the shouldFree flag, and leaked the tuple into the current
memory context if true. Fix that by freeing the tuple in that case.
Looking at the relevant code made me (Andres) realize that not having
the shouldFree parameter to ExecForceStoreHeapTuple() was a bad
idea. Some callers had to locally implement the necessary logic, and
in one case it was missing, creating a potential per-group leak in
non-hashed aggregation.
The choice to not free the tuple in ExecComputeStoredGenerated() is
not pretty, but not introduced by this commit - I'll start a separate
discussion about it.
Reported-By: Tom Lane
Discussion: https://postgr.es/m/366.1555382816@sss.pgh.pa.us
Such calls can confuse the reader as strcmp() uses an integer as result.
The places patched here have been spotted by Thomas Munro, David Rowley
and myself.
Author: Michael Paquier
Reviewed-by: David Rowley
Discussion: https://postgr.es/m/20190411021946.GG2728@paquier.xyz
Fix some places where we might fail to do Py_DECREF() on a Python
object (thereby leaking it for the rest of the session). Almost
all of the risks were in error-recovery paths, which we don't really
expect to hit anyway. Hence, while this is definitely a bug fix,
it doesn't quite seem worth back-patching.
Nikita Glukhov, Michael Paquier, Tom Lane
Discussion: https://postgr.es/m/28053a7d-10d8-fc23-b05c-b4749c873f63@postgrespro.ru
Similarly to the set of parameters for keepalive, a connection parameter
for libpq is added as well as a backend GUC, called tcp_user_timeout.
Increasing the TCP user timeout is useful to allow a connection to
survive extended periods without end-to-end connection, and decreasing
it allows application to fail faster. By default, the parameter is 0,
which makes the connection use the system default, and follows a logic
close to the keepalive parameters in its handling. When connecting
through a Unix-socket domain, the parameters have no effect.
Author: Ryohei Nagaura
Reviewed-by: Fabien Coelho, Robert Haas, Kyotaro Horiguchi, Kirk
Jamison, Mikalai Keida, Takayuki Tsunakawa, Andrei Yahorau
Discussion: https://postgr.es/m/EDA4195584F5064680D8130B1CA91C45367328@G01JPEXMBYT04
This allows the user to create duplicates of existing replication slots,
either logical or physical, and even changing properties such as whether
they are temporary or the output plugin used.
There are multiple uses for this, such as initializing multiple replicas
using the slot for one base backup; when doing investigation of logical
replication issues; and to select a different output plugins.
Author: Masahiko Sawada
Reviewed-by: Michael Paquier, Andres Freund, Petr Jelinek
Discussion: https://postgr.es/m/CAD21AoAm7XX8y_tOPP6j4Nzzch12FvA1wPqiO690RCk+uYVstg@mail.gmail.com
Commit c1afd175, which added support for rootdescend verification to
amcheck, added only minimal regression test coverage. Address this by
making sure that rootdescend verification is run on a multi-level index.
In passing, simplify some of the regression tests that exercise
multi-level nbtree page deletion.
Both issues spotted while rereviewing coverage of the nbtree patch
series using gcov.
Since file_fdw uses COPY internally, but COPY doesn't allow listing
generated columns in its column list, we need to make sure that we
don't add generated columns to the column lists internally generated
by file_fdw.
Reported-by: Erik Rijkers <er@xs4all.nl>
Query planning is affected by a number of configuration options, and it
may be crucial to know which of those options were set to non-default
values. With this patch you can say EXPLAIN (SETTINGS ON) to include
that information in the query plan. Only options affecting planning,
with values different from the built-in default are printed.
This patch also adds auto_explain.log_settings option, providing the
same capability in auto_explain module.
Author: Tomas Vondra
Reviewed-by: Rafia Sabih, John Naylor
Discussion: https://postgr.es/m/e1791b4c-df9c-be02-edc5-7c8874944be0@2ndquadrant.com
This uses the progress reporting infrastructure added by c16dc1aca5e0,
adding support for CREATE INDEX and CREATE INDEX CONCURRENTLY.
There are two pieces to this: one is index-AM-agnostic, and the other is
AM-specific. The latter is fairly elaborate for btrees, including
reportage for parallel index builds and the separate phases that btree
index creation uses; other index AMs, which are much simpler in their
building procedures, have simplistic reporting only, but that seems
sufficient, at least for non-concurrent builds.
The index-AM-agnostic part is fairly complete, providing insight into
the CONCURRENTLY wait phases as well as block-based progress during the
index validation table scan. (The index validation index scan requires
patching each AM, which has not been included here.)
Reviewers: Rahila Syed, Pavan Deolasee, Tatsuro Yamada
Discussion: https://postgr.es/m/20181220220022.mg63bhk26zdpvmcj@alvherre.pgsql
