command id is the cmin, when it can in fact be a combo cid. That made rows
incorrectly invisible to a transaction where a tuple was deleted by multiple
aborted subtransactions.
Report and patch Karl Schnaitter. Back-patch to 8.3, where combo cids was
introduced.
a target type that isn't acceptable, the code failed to raise the proper
error. The result instead was to return a NULL expression tree, which
in a quick test led to a 'cache lookup failed for type 0' error later.
Patch 8.3 only --- I fixed this in HEAD as part of recent locations patch.
when its input is constant and the element coercion function is immutable
(or nonexistent, ie, binary-coercible case). This is an oversight in the
8.3 implementation of ArrayCoerceExpr, and its result is that certain cases
involving IN or NOT IN with constants don't get optimized as they should be.
Per experimentation with an example from Ow Mun Heng.
at once and ItemPointers are collected in memory.
Remove tuple's killing by killtuple() if tuple was moved to another
page - it could produce unaceptable overhead.
Backpatch up to 8.1 because the bug was introduced by GiST's concurrency support.
Per Microsoft knowledge base article Q201213, early versions of
Windows fail when we do this. Later versions of Windows appear
to have a higher limit than 64Kb, but do still fail on large
sends, so we unconditionally limit it for all versions.
Patch from Tom Lane.
returns NULL instead of a PGresult. The former coding would fail, which
is OK, but it neglected to give you the PQerrorMessage that might tell
you why. In the oldest branches, there was another problem: it'd sometimes
report PQerrorMessage from the wrong connection.
parent, not only those with RangeTblRefs. We need them in ExecCheckRTPerms.
Report by Brendan O'Shea. Back-patch to 8.2, where pull_up_simple_union_all
was introduced.
REINDEX DATABASE including same) is done before a session has done any other
update on pg_class, the pg_class relcache entry was left with an incorrect
setting of rd_indexattr, because the indexed-attributes set would be first
demanded at a time when we'd forced a partial list of indexes into the
pg_class entry, and it would remain cached after that. This could result
in incorrect decisions about HOT-update safety later in the same session.
In practice, since only pg_class_relname_nsp_index would be missed out,
only ALTER TABLE RENAME and ALTER TABLE SET SCHEMA could trigger a problem.
Per report and test case from Ondrej Jirman.
INSERT or UPDATE will match the target table's current rowtype. In pre-8.3
releases inconsistency can arise with stale cached plans, as reported by
Merlin Moncure. (We patched the equivalent hazard on the SELECT side in Feb
2007; I'm not sure why we thought there was no risk on the insertion side.)
In 8.3 and HEAD this problem should be impossible due to plan cache
invalidation management, but it seems prudent to make the check anyway.
Back-patch as far as 8.0. 7.x versions lack ALTER COLUMN TYPE, so there
seems no way to abuse a stale plan comparably.
would work, but in fact it didn't return the same rows when moving backwards
as when moving forwards. This would have no visible effect in a DISTINCT
query (at least assuming the column datatypes use a strong definition of
equality), but it gave entirely wrong answers for DISTINCT ON queries.
read when the --temp-config argument is bad. Noted while wondering why
buildfarm member dungbeetle is failing ... this isn't why, but it is why
the error report isn't very helpful ...
the alreadyDeleted list has to be passed down through
deleteDependentObjects(), else objects that are deleted via auto/internal
dependencies don't get reported back up to performMultipleDeletions().
Depending on the visitation order, this could cause the code to try to delete
an already-deleted object, leading to strange errors in DROP OWNED (typically
"cache lookup failed for relation NNNNN" or similar). Per bug #4289.
Patch for back branches only. This code has recently been rewritten in HEAD,
and doesn't have this particular bug anymore.
bug #4290. The fundamental bug is that masking extParam by outer_params,
as finalize_plan had been doing, caused us to lose the information that
an initPlan depended on the output of a sibling initPlan. On reflection
the best thing to do seemed to be not to try to adjust outer_params for
this case but get rid of it entirely. The only thing it was really doing
for us was to filter out param IDs associated with SubPlan nodes, and that
can be done (with greater accuracy) while processing individual SubPlan
nodes in finalize_primnode. This approach was vindicated by the discovery
that the masking method was hiding a second bug: SS_finalize_plan failed to
remove extParam bits for initPlan output params that were referenced in the
main plan tree (it only got rid of those referenced by other initPlans).
It's not clear that this caused any real problems, given the limited use
of extParam by the executor, but it's certainly not what was intended.
I originally thought that there was also a problem with needing to include
indirect dependencies on external params in initPlans' param sets, but it
turns out that the executor handles this correctly so long as the depended-on
initPlan is earlier in the initPlans list than the one using its output.
That seems a bit of a fragile assumption, but it is true at the moment,
so I just documented it in some code comments rather than making what would
be rather invasive changes to remove the assumption.
Back-patch to 8.1. Previous versions don't have the case of initPlans
referring to other initPlans' outputs, so while the existing logic is still
questionable for them, there are not any known bugs to be fixed. So I'll
refrain from changing them for now.
log message at newlines cost O(N^2) for very long messages with few or no
newlines. For messages in the megabyte range this became the dominant cost.
Per gripe from Achilleas Mantzios.
Patch all the way back, since this is a safe change with no portability
risks. I am also thinking of increasing PG_SYSLOG_LIMIT, but that should
be done separately.
results always contribute two groups, regardless of the expression contents.
This is very substantially more accurate than the regular heuristic for
certain boolean tests like "col IS NULL". Per gripe from Sam Mason.
Back-patch to all supported releases, since the behavior of
estimate_num_groups() hasn't changed all that much since 7.4.
the timezone argument as a timezone abbreviation, and only try it as a full
timezone name if that fails. The zic database has four zones (CET, EET, MET,
WET) that are full daylight-savings zones and yet have names that are the
same as their abbreviations for standard time, resulting in ambiguity.
In the timestamp input functions we resolve the ambiguity by preferring the
abbreviation, and AT TIME ZONE should work the same way. (No functionality
is lost because the zic database also has other names for these zones, eg
Europe/Zurich.) Per gripe from Jaromir Talir.
Backpatch to 8.1. Older releases did not have the issue because AT TIME ZONE
only accepted abbreviations not zone names. (Thus, this patch also arguably
fixes a compatibility botch introduced at 8.1: in ambiguous cases we now
behave the same as 8.0 did.)
variable that has units. Per report from Stefan Kaltenbrunner.
Backport to 8.2. I also backported my patch of 2007-06-21 that prevented
comparable overflows on the input side, since that now seems to have enough
field track record to be back-patched safely. That patch included addition
of hints listing the available unit names, which I did not bother to strip
out of it --- this will make a little more work for the translators, but
they can copy the translation from 8.3, and anyway an untranslated hint
is better than no hint.
timezone setting in the current year and for 100 years back, rather than
always examining years 1904-2004. The original coding would have problems
distinguishing zones whose behavior diverged only after 2004; which is a
situation we will surely face sometime, if it's not out there already.
In passing, also prevent selection of the dummy "Factory" timezone, even
if that's exactly what the system is using. Reporting time as GMT seems
better than that.
of any lower outer join, even if it also references the non-nullable side and
so could not get pushed below the outer join anyway. We need this in case
the clause is an OR clause: if it doesn't get marked outerjoin_delayed,
create_or_index_quals() could pull an indexable restriction for the nullable
side out of it, leading to wrong results as demonstrated by today's bug
report from toruvinn. (See added regression test case for an example.)
In principle this has been wrong for quite a while. In practice I don't
think any branch before 8.3 can really show the failure, because
create_or_index_quals() will only pull out indexable conditions, and before
8.3 those were always strict. So though we might have improperly generated
null-extended rows in the outer join, they'd get discarded from the result
anyway. The gating factor that makes the failure visible is that 8.3
considers "col IS NULL" to be indexable. Hence I'm not going to risk
back-patching further than 8.3.
by installing an error context subroutine that will provide the file name
and line number for all errors detected while reading a config file.
Some of the reader routines were already doing that in an ad-hoc way for
errors detected directly in the reader, but it didn't help for problems
detected in subroutines, such as encoding violations.
Back-patch to 8.3 because 8.3 is where people will be trying to debug
configuration files.
that it depends on for replan-forcing purposes. We need to consider plain OID
constants too, because eval_const_expressions folds a RelabelType atop a Const
to just a Const. This change could result in OID values that aren't really
for tables getting added to the dependency list, but the worst-case
consequence would be occasional useless replans. Per report from Gabriele
Messineo.
1. Directly reading interp->result is deprecated in Tcl 8.0 and later;
you're supposed to use Tcl_GetStringResult. This code finally broke with
Tcl 8.5, because Tcl_GetVar can now have side-effects on interp->result even
though it preserves the logical state of the result. (There's arguably a
Tcl issue here, because Tcl_GetVar could invalidate the pointer result of a
just-preceding Tcl_GetStringResult, but I doubt the Tcl guys will see it as
a bug.)
2. We were being sloppy about the encoding of the result: some places would
push database-encoding data into the Tcl result, which should not happen,
and we were assuming that any error result coming back from Tcl was in the
database encoding, which is not a good assumption.
3. There were a lot of calls of Tcl_SetResult that uselessly specified
TCL_VOLATILE for constant strings. This is only a minor performance issue,
but I fixed it in passing since I had to look at all the calls anyway.
#2 is a live bug regardless of which Tcl version you are interested in,
so back-patch even to branches that are unlikely to be used with Tcl 8.5.
I went back as far as 8.0, which is as far as the patch applied easily;
7.4 was using a different error processing scheme that has got its own
problems :-(
the problem happened in. These are all supposedly can't-happen cases, but
when they do happen it's useful to know where.
Back-patch to 8.3, but not further because the patch doesn't apply cleanly
further back. Given the lack of response to my proposal of this, there
doesn't seem to be enough interest to justify much back-porting effort.
CacheInvalidateRelcache() crashes if called in WAL recovery, because the
invalidation infrastructure hasn't been initialized yet.
Back-patch to 8.2, where the bug was introduced.
