When this code was written the duplicity didn't matter, but with all the
SLRU-bank stuff we just added, it has become excessive. Turn it into a
simpler loop with no code duplication. Also add a test so that this
code becomes covered.
Discussion: https://postgr.es/m/202403041517.3a35jw53os65@alvherre.pgsql
More precisely, what we do here is make the SLRU cache sizes
configurable with new GUCs, so that sites with high concurrency and big
ranges of transactions in flight (resp. multixacts/subtransactions) can
benefit from bigger caches. In order for this to work with good
performance, two additional changes are made:
1. the cache is divided in "banks" (to borrow terminology from CPU
caches), and algorithms such as eviction buffer search only affect
one specific bank. This forestalls the problem that linear searching
for a specific buffer across the whole cache takes too long: we only
have to search the specific bank, whose size is small. This work is
authored by Andrey Borodin.
2. Change the locking regime for the SLRU banks, so that each bank uses
a separate LWLock. This allows for increased scalability. This work
is authored by Dilip Kumar. (A part of this was previously committed as
d172b717c6f4.)
Special care is taken so that the algorithms that can potentially
traverse more than one bank release one bank's lock before acquiring the
next. This should happen rarely, but particularly clog.c's group commit
feature needed code adjustment to cope with this. I (Álvaro) also added
lots of comments to make sure the design is sound.
The new GUCs match the names introduced by bcdfa5f2e2 in the
pg_stat_slru view.
The default values for these parameters are similar to the previous
sizes of each SLRU. commit_ts, clog and subtrans accept value 0, which
means to adjust by dividing shared_buffers by 512 (so 2MB for every 1GB
of shared_buffers), with a cap of 8MB. (A new slru.c function
SimpleLruAutotuneBuffers() was added to support this.) The cap was
previously 1MB for clog, so for sites with more than 512MB of shared
memory the total memory used increases, which is likely a good tradeoff.
However, other SLRUs (notably multixact ones) retain smaller sizes and
don't support a configured value of 0. These values based on
shared_buffers may need to be revisited, but that's an easy change.
There was some resistance to adding these new GUCs: it would be better
to adjust to memory pressure automatically somehow, for example by
stealing memory from shared_buffers (where the caches can grow and
shrink naturally). However, doing that seems to be a much larger
project and one which has made virtually no progress in several years,
and because this is such a pain point for so many users, here we take
the pragmatic approach.
Author: Andrey Borodin <x4mmm@yandex-team.ru>
Author: Dilip Kumar <dilipbalaut@gmail.com>
Reviewed-by: Amul Sul, Gilles Darold, Anastasia Lubennikova,
Ivan Lazarev, Robert Haas, Thomas Munro, Tomas Vondra,
Yura Sokolov, Васильев Дмитрий (Dmitry Vasiliev).
Discussion: https://postgr.es/m/2BEC2B3F-9B61-4C1D-9FB5-5FAB0F05EF86@yandex-team.ru
Discussion: https://postgr.es/m/CAFiTN-vzDvNz=ExGXz6gdyjtzGixKSqs0mKHMmaQ8sOSEFZ33A@mail.gmail.com
The new names are intended to match those in an upcoming patch that adds
a few GUCs to configure the SLRU buffer sizes.
Backwards compatibility concern: this changes the accepted names for
function pg_stat_slru_rest(). Since this function recognizes "any other
string" as a request to reset the entry for "other", this means that
calling it with the old names would silently reset "other" instead of
doing nothing or throwing an error.
Reviewed-by: Andrey M. Borodin <x4mmm@yandex-team.ru>
Discussion: https://postgr.es/m/202402261616.dlriae7b6emv@alvherre.pgsql
We've had repeated bugs in the area of handling SLRU wraparound in the past,
some of which have caused data loss. Switching to an indexing system for SLRUs
that does not wrap around should allow us to get rid of a whole bunch
of problems and improve the overall reliability of the system.
This particular patch however only changes the indexing and doesn't address
the wraparound per se. This is going to be done in the following patches.
Author: Maxim Orlov, Aleksander Alekseev, Alexander Korotkov, Teodor Sigaev
Author: Nikita Glukhov, Pavel Borisov, Yura Sokolov
Reviewed-by: Jacob Champion, Heikki Linnakangas, Alexander Korotkov
Reviewed-by: Japin Li, Pavel Borisov, Tom Lane, Peter Eisentraut, Andres Freund
Reviewed-by: Andrey Borodin, Dilip Kumar, Aleksander Alekseev
Discussion: https://postgr.es/m/CACG%3DezZe1NQSCnfHOr78AtAZxJZeCvxrts0ygrxYwe%3DpyyjVWA%40mail.gmail.com
Discussion: https://postgr.es/m/CAJ7c6TPDOYBYrnCAeyndkBktO0WG2xSdYduTF0nxq%2BvfkmTF5Q%40mail.gmail.com
This reverts commit 06f5295 as per issues with this approach, both in
terms of efficiency impact and stability. First, contrary to the
single-item cache for transaction IDs in transam.c, the cache may finish
by not be hit for a long time, and without an invalidation mechanism to
clear it, it would cause inconsistent results on wraparound for
example. Second, the use of SubTransGetTopmostTransaction() for the
caching has a limited impact on performance. SubTransGetParent() could
have more impact, though the benchmarking of the single-item approach
still needs to be proved, particularly under the conditions where SLRU
lookups are stressed in parallel with overflowed snapshots (aka more
than 64 subxids generated, for example).
After discussion with Andres Freund.
Discussion: https://postgr.es/m/20220524235250.gtt3uu5zktfkr4hv@alap3.anarazel.de
This change affects SubTransGetTopmostTransaction(), used to find the
topmost transaction ID of a given transaction ID. The cache is able to
store one value, so as we can save the backend from unnecessary lookups
at pg_subtrans/ on repetitive calls of this routine. There is a similar
practice in transam.c, for example.
Author: Simon Riggs
Reviewed-by: Andrey Borodin, Julien Rouhaud
Discussion: https://postgr.es/m/CANbhV-G8Co=yq4v4BkW7MJDqVt68K_8A48nAZ_+8UQS7LrwLEQ@mail.gmail.com
Every core SLRU wraps around. With the exception of pg_notify, the wrap
point can fall in the middle of a page. Account for this in the
PagePrecedes callback specification and in SimpleLruTruncate()'s use of
said callback. Update each callback implementation to fit the new
specification. This changes SerialPagePrecedesLogically() from the
style of asyncQueuePagePrecedes() to the style of CLOGPagePrecedes().
(Whereas pg_clog and pg_serial share a key space, pg_serial is nothing
like pg_notify.) The bug fixed here has the same symptoms and user
followup steps as 592a589a04. Back-patch
to 9.5 (all supported versions).
Reviewed by Andrey Borodin and (in earlier versions) by Tom Lane.
Discussion: https://postgr.es/m/20190202083822.GC32531@gust.leadboat.com
Previously, we called fsync() after writing out individual pg_xact,
pg_multixact and pg_commit_ts pages due to cache pressure, leading to
regular I/O stalls in user backends and recovery. Collapse requests for
the same file into a single system call as part of the next checkpoint,
as we already did for relation files, using the infrastructure developed
by commit 3eb77eba. This can cause a significant improvement to
recovery performance, especially when it's otherwise CPU-bound.
Hoist ProcessSyncRequests() up into CheckPointGuts() to make it clearer
that it applies to all the SLRU mini-buffer-pools as well as the main
buffer pool. Rearrange things so that data collected in CheckpointStats
includes SLRU activity.
Also remove the Shutdown{CLOG,CommitTS,SUBTRANS,MultiXact}() functions,
because they were redundant after the shutdown checkpoint that
immediately precedes them. (I'm not sure if they were ever needed, but
they aren't now.)
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us> (parts)
Tested-by: Jakub Wartak <Jakub.Wartak@tomtom.com>
Discussion: https://postgr.es/m/CA+hUKGLJ=84YT+NvhkEEDAuUtVHMfQ9i-N7k_o50JmQ6Rpj_OQ@mail.gmail.com
The SimpleLruTruncate() header comment states the new coding rule. To
achieve this, add locktype "frozenid" and two LWLocks. This closes a
rare opportunity for data loss, which manifested as "apparent
wraparound" or "could not access status of transaction" errors. Data
loss is more likely in pg_multixact, due to released branches' thin
margin between multiStopLimit and multiWrapLimit. If a user's physical
replication primary logged ": apparent wraparound" messages, the user
should rebuild standbys of that primary regardless of symptoms. At less
risk is a cluster having emitted "not accepting commands" errors or
"must be vacuumed" warnings at some point. One can test a cluster for
this data loss by running VACUUM FREEZE in every database. Back-patch
to 9.5 (all supported versions).
Discussion: https://postgr.es/m/20190218073103.GA1434723@rfd.leadboat.com
Including Full in variable names duplicates the type information and
leads to overly long names. As FullTransactionId cannot accidentally
be casted to TransactionId that does not seem necessary.
Author: Andres Freund
Discussion: https://postgr.es/m/20200724011143.jccsyvsvymuiqfxu@alap3.anarazel.de
Originally, the names assigned to SLRUs had no purpose other than
being shmem lookup keys, so not a lot of thought went into them.
As of v13, though, we're exposing them in the pg_stat_slru view and
the pg_stat_reset_slru function, so it seems advisable to take a bit
more care. Rename them to names based on the associated on-disk
storage directories (which fortunately we *did* think about, to some
extent; since those are also visible to DBAs, consistency seems like
a good thing). Also rename the associated LWLocks, since those names
are likewise user-exposed now as wait event names.
For the most part I only touched symbols used in the respective modules'
SimpleLruInit() calls, not the names of other related objects. This
renaming could have been taken further, and maybe someday we will do so.
But for now it seems undesirable to change the names of any globally
visible functions or structs, so some inconsistency is unavoidable.
(But I *did* terminate "oldserxid" with prejudice, as I found that
name both unreadable and not descriptive of the SLRU's contents.)
Table 27.12 needs re-alphabetization now, but I'll leave that till
after the other LWLock renamings I have in mind.
Discussion: https://postgr.es/m/28683.1589405363@sss.pgh.pa.us
Instead of inferring epoch progress from xids and checkpoints,
introduce a 64 bit FullTransactionId type and use it to track xid
generation. This fixes an unlikely bug where the epoch is reported
incorrectly if the range of active xids wraps around more than once
between checkpoints.
The only user-visible effect of this commit is to correct the epoch
used by txid_current() and txid_status(), also visible with
pg_controldata, in those rare circumstances. It also creates some
basic infrastructure so that later patches can use 64 bit
transaction IDs in more places.
The new type is a struct that we pass by value, as a form of strong
typedef. This prevents the sort of accidental confusion between
TransactionId and FullTransactionId that would be possible if we
were to use a plain old uint64.
Author: Thomas Munro
Reported-by: Amit Kapila
Reviewed-by: Andres Freund, Tom Lane, Heikki Linnakangas
Discussion: https://postgr.es/m/CAA4eK1%2BMv%2Bmb0HFfWM9Srtc6MVe160WFurXV68iAFMcagRZ0dQ%40mail.gmail.com
StartupSUBTRANS() incorrectly handled cases near the max pageid in the subtrans
data structure, which in some cases could lead to errors in startup for Hot
Standby.
This patch wraps the pageids correctly, avoiding any such errors.
Identified by exhaustive crash testing by Jeff Janes.
Jeff Janes
This makes it significantly easier to identify these lwlocks in
LWLOCK_STATS or Trace_lwlocks output. It's also arguably better
from a modularity standpoint, since lwlock.c no longer needs to
know anything about the LWLock needs of the higher-level SLRU
facility.
Ildus Kurbangaliev, reviewd by Álvaro Herrera and by me.
If there were no subtransactions (or multixacts) active, we would calculate
the oldestxid == next xid. That's correct, but if next XID happens to be
on the next pg_subtrans (pg_multixact) page, the page does not exist yet,
and SimpleLruTruncate will produce an "apparent wraparound" warning. The
warning is harmless in this case, but looks very alarming to users.
Backpatch to all supported versions. Patch and analysis by Thomas Munro.
SLRU_SEGMENTS_PER_PAGE -> SLRU_PAGES_PER_SEGMENT
I introduced this ancient typo in subtrans.c and later propagated it to
multixact.c. I fixed the latter in f741300c, but only back to 9.3;
backpatch to all supported branches for consistency.
Instead, declare a public wrapper of the sole function using it for
external callers, so that they don't have to always pass a NULL
argument.
Author: Kevin Grittner
Enabled by recovery_connections = on (default) and forcing archive recovery using a recovery.conf. Recovery processing now emulates the original transactions as they are replayed, providing full locking and MVCC behaviour for read only queries. Recovery must enter consistent state before connections are allowed, so there is a delay, typically short, before connections succeed. Replay of recovering transactions can conflict and in some cases deadlock with queries during recovery; these result in query cancellation after max_standby_delay seconds have expired. Infrastructure changes have minor effects on normal running, though introduce four new types of WAL record.
New test mode "make standbycheck" allows regression tests of static command behaviour on a standby server while in recovery. Typical and extreme dynamic behaviours have been checked via code inspection and manual testing. Few port specific behaviours have been utilised, though primary testing has been on Linux only so far.
This commit is the basic patch. Additional changes will follow in this release to enhance some aspects of behaviour, notably improved handling of conflicts, deadlock detection and query cancellation. Changes to VACUUM FULL are also required.
Simon Riggs, with significant and lengthy review by Heikki Linnakangas, including streamlined redesign of snapshot creation and two-phase commit.
Important contributions from Florian Pflug, Mark Kirkwood, Merlin Moncure, Greg Stark, Gianni Ciolli, Gabriele Bartolini, Hannu Krosing, Robert Haas, Tatsuo Ishii, Hiroyuki Yamada plus support and feedback from many other community members.
snapmgmt.c file for the former. The header files have also been reorganized
in three parts: the most basic snapshot definitions are now in a new file
snapshot.h, and the also new snapmgmt.h keeps the definitions for snapmgmt.c.
tqual.h has been reduced to the bare minimum.
This patch is just a first step towards managing live snapshots within a
transaction; there is no functionality change.
Per my proposal to pgsql-patches on 20080318191940.GB27458@alvh.no-ip.org and
subsequent discussion.
before reporting a transaction committed. Data consistency is still
guaranteed (unlike setting fsync = off), but a crash may lose the effects
of the last few transactions. Patch by Simon, some editorialization by Tom.
