constants through full joins, as in
select * from tenk1 a full join tenk1 b using (unique1)
where unique1 = 42;
which should generate a fairly cheap plan where we apply the constraint
unique1 = 42 in each relation scan. This had been broken by my patch of
2008-06-27, which is now reverted in favor of a more invasive but hopefully
less incorrect approach. That patch was meant to prevent incorrect extraction
of OR'd indexclauses from OR conditions above an outer join. To do that
correctly we need more information than the outerjoin_delay flag can provide,
so add a nullable_relids field to RestrictInfo that records exactly which
relations are nulled by outer joins that are underneath a particular qual
clause. A side benefit is that we can make the test in create_or_index_quals
more specific: it is now smart enough to extract an OR'd indexclause into the
outer side of an outer join, even though it must not do so in the inner side.
The old coding couldn't distinguish these cases so it could not do either.
by the planning process. This prevents the "failed to locate grouping columns"
error recently reported by Dickson Guedes. That happens because planning
replaces SubLinks by SubPlans in the subquery's targetlist, and exprTypmod()
is smarter about the former than the latter, causing the apparent type of
the subquery's output columns to change. This seems to be a deficiency we
should fix in exprTypmod(), but that will be a much more invasive patch
with possible side-effects elsewhere, so I'll do that only in HEAD.
Back-patch to 8.3. Arguably the lack of a copying step is broken/dangerous
all the way back, but in the absence of known problems I'll refrain from
making the older branches pay the extra cost. (The reason this particular
symptom didn't appear before is that exprTypmod() wasn't smart about SubLinks
either, until 8.3.)
outer join clauses. Given, say,
... from a left join b on a.a1 = b.b1 where a.a1 = 42;
we'll deduce a clause b.b1 = 42 and then mark the original join clause
redundant (we can't remove it completely for reasons I don't feel like
squeezing into this log entry). However the original implementation of
that wasn't bulletproof, because clause_selectivity() wouldn't honor
this_selec if given nonzero varRelid --- which in practice meant that
it worked as desired *except* when considering index scan quals. Which
resulted in bogus underestimation of the size of the indexscan result for
an inner indexscan in an outer join, and consequently a possibly bad
choice of indexscan vs. bitmap scan. Fix by introducing an explicit test
into clause_selectivity(). Also, to make sure we don't trigger that test
in corner cases, change the convention to be that this_selec > 1, not
this_selec = 1, means it's been marked redundant. Per trouble report from
Scara Maccai.
Back-patch to 8.2, where the problem was introduced.
we extended the appendrel mechanism to support UNION ALL optimization. The
reason nobody noticed was that we are not actually using attr_needed data for
appendrel children; hence it seems more reasonable to rip it out than fix it.
Back-patch to 8.2 because an Assert failure is possible in corner cases.
Per examination of an example from Jim Nasby.
In HEAD, also get rid of AppendRelInfo.col_mappings, which is quite inadequate
to represent UNION ALL situations; depend entirely on translated_vars instead.
btree. We can't easily tell whether clauses generated from the equivalence
class could be used with such an index, so just assume that they might be.
This bit of over-optimization prevented use of non-btree indexes for nestloop
inner indexscans, in any case where the join uses an equality operator that
is also a btree operator --- which in particular is typically true for hash
indexes. Noted while trying to test the current hash index patch.
eval_const_expressions needs to be passed the PlannerInfo ("root") structure,
because in some cases we want it to substitute values for Param nodes.
(So "constant" is not so constant as all that ...) This mistake partially
disabled optimization of unnamed extended-Query statements in 8.3: in
particular the LIKE-to-indexscan optimization would never be applied if the
LIKE pattern was passed as a parameter, and constraint exclusion depending
on a parameter value didn't work either.
knowledge up through any joins it participates in. We were doing that already
in some special cases but not in the general case. Also, defend against zero
row estimates for the input relations in cost_mergejoin --- this fix may have
eliminated the only scenario in which that can happen, but be safe. Per
report from Alex Solovey.
for unhandled clause types ought to be 0.5, not 1.0. I fear I introduced
this silliness due to misreading the intent of the very-poorly-structured
code that was there when we inherited the file from Berkeley. The lack
of sanity in this behavior was exposed by an example from Sim Zacks.
(Arguably this is a bug fix and should be back-patched, but I'm a bit
hesitant to introduce a possible planner behavior change in the back
branches; it might detune queries that worked acceptably in the past.)
While at it, make estimation for DistinctExpr do something marginally
realistic, rather than just defaulting.
clauseless joins of relations that have unexploited join clauses. Rather
than looking at every other base relation in the query, the correct thing is
to examine the other relations in the "initial_rels" list of the current
make_rel_from_joinlist() invocation, because those are what we actually have
the ability to join against. This might be a subset of the whole query in
cases where join_collapse_limit or from_collapse_limit or full joins have
prevented merging the whole query into a single join problem. This is a bit
untidy because we have to pass those rels down through a new PlannerInfo
field, but it's necessary. Per bug #3865 from Oleg Kharin.
of poorer planning in 8.3 than 8.2:
1. After pushing a constant across an outer join --- ie, given
"a LEFT JOIN b ON (a.x = b.y) WHERE a.x = 42", we can deduce that b.y is
sort of equal to 42, in the sense that we needn't fetch any b rows where
it isn't 42 --- loop to see if any additional deductions can be made.
Previous releases did that by recursing, but I had mistakenly thought that
this was no longer necessary given the EquivalenceClass machinery.
2. Allow pushing constants across outer join conditions even if the
condition is outerjoin_delayed due to a lower outer join. This is safe
as long as the condition is strict and we re-test it at the upper join.
3. Keep the outer-join clause even if we successfully push a constant
across it. This is *necessary* in the outerjoin_delayed case, but
even in the simple case, it seems better to do this to ensure that the
join search order heuristics will consider the join as reasonable to
make. Mark such a clause as having selectivity 1.0, though, since it's
not going to eliminate very many rows after application of the constant
condition.
4. Tweak have_relevant_eclass_joinclause to report that two relations
are joinable when they have vars that are equated to the same constant.
We won't actually generate any joinclause from such an EquivalenceClass,
but again it seems that in such a case it's a good idea to consider
the join as worth costing out.
5. Fix a bug in select_mergejoin_clauses that was exposed by these
changes: we have to reject candidate mergejoin clauses if either side was
equated to a constant, because we can't construct a canonical pathkey list
for such a clause. This is an implementation restriction that might be
worth fixing someday, but it doesn't seem critical to get it done for 8.3.
the two join variables at both ends: not only trailing rows that need not be
scanned because there cannot be a match on the other side, but initial rows
that will be scanned without possibly having a match. This allows a more
realistic estimate of startup cost to be made, per recent pgsql-performance
discussion. In passing, fix a couple of bugs that had crept into
mergejoinscansel: it was not quite up to speed for the task of estimating
descending-order scans, which is a new requirement in 8.3.
clauselist_selectivity skip some analysis that's useless when there's only
one clause in the given list. Actually this can win even for not-so-simple
queries, because we also apply clauselist_selectivity to sublists such as the
quals matching an index; which are likely to have only a single entry even
when the total query is quite complicated.
where the EquivalenceClass machinery is unable to deduce anything more from a
simple "var = const" qual clause. There are probably some more cases where
this could be done, but this seems to take care of most of the added overhead
for simple queries. Per gripe from Guillaume Smet.
In passing, fix a problem that was exposed by this change:
reconsider_outer_join_clause and friends were passing the wrong relids to
build_implied_join_equality, resulting in RestrictInfos with the wrong
required_relids. This mistake was masked in typical cases since the bogus
RestrictInfos would never have escaped from the EquivalenceClass machinery,
but I think there might be corner cases involving "broken" ECs where there
would have been a visible failure even without the new optimization. In any
case the code was certainly not operating as intended.
predictable manner; in particular that if you say ORDER BY output-column-ref,
it will in fact sort by that specific column even if there are multiple
syntactic matches. An example is
SELECT random() AS a, random() AS b FROM ... ORDER BY b, a;
While the use-case for this might be a bit debatable, it worked as expected
in earlier releases, so we should preserve the behavior for 8.3. Per my
recent proposal.
While at it, fix convert_subquery_pathkeys() to handle RelabelType stripping
in both directions; it needs this for the same reasons make_sort_from_pathkeys
does.
to be able to discard top-level RelabelType nodes on *both* sides of the
equivalence-class-to-target-list comparison, since make_pathkey_from_sortinfo
might either add or remove a RelabelType. Also fix the latter to do the
removal case cleanly. Per example from Peter.
make_greater_string() try harder to generate a string that's actually greater
than its input string. Before we just assumed that making a string that was
memcmp-greater was enough, but it is easy to generate examples where this is
not so when the locale is not C. Instead, loop until the relevant comparison
function agrees that the generated string is greater than the input.
Unfortunately this is probably not enough to guarantee that the generated
string is greater than all extensions of the input, so we cannot relax the
restriction to C locale for the LIKE/regex index optimization. But it should
at least improve the odds of getting a useful selectivity estimate in
prefix_selectivity(). Per example from Guillaume Smet.
Backpatch to 8.1, mainly because that's what the complainant is using...
RelabelType nodes when the sort key is binary-compatible with the sort
operator rather than having exactly its input type. We did this correctly
for index columns but not sort keys, leading to failure to notice that
a varchar index matches an ORDER BY request. This requires a bit more work
in make_sort_from_pathkeys, but not anyplace else that I can find.
Per bug report and subsequent discussion.
This doubles the planning workload for mergejoins while not actually
accomplishing much. The only useful case is where one of the directions
matches the query's ORDER BY request; therefore, put a thumb on the scales
in that direction, and otherwise arbitrarily consider only the ASC direction.
(This is a lot easier now than it would've been before 8.3, since we have
more semantic knowledge embedded in PathKeys now.)
if either of the input relations can legally be joined to any other rels using
join clauses. This avoids uselessly (and expensively) considering a lot of
really stupid join paths when there is a join restriction with a large
footprint, that is, lots of relations inside its LHS or RHS. My patch of
15-Feb-2007 had been causing the code to consider joining *every* combination
of rels inside such a group, which is exponentially bad :-(. With this
behavior, clauseless bushy joins will be done if necessary, but they'll be
put off as long as possible. Per report from Jakub Ouhrabka.
Backpatch to 8.2. We might someday want to backpatch to 8.1 as well, but 8.1
does not have the problem for OUTER JOIN nests, only for IN-clauses, so it's
not clear anyone's very likely to hit it in practice; and the current patch
doesn't apply cleanly to 8.1.
then-delete on the current cursor row. The basic fix is that nodeTidscan.c
has to apply heap_get_latest_tid() to the current-scan-TID obtained from the
cursor query; this ensures we get the latest row version to work with.
However, since that only works if the query plan is a TID scan, we also have
to hack the planner to make sure only that type of plan will be selected.
(Formerly, the planner might decide to apply a seqscan if the table is very
small. This change is probably a Good Thing anyway, since it's hard to see
how a seqscan could really win.) That means the execQual.c code to support
CurrentOfExpr as a regular expression type is dead code, so replace it with
just an elog(). Also, add regression tests covering these cases. Note
that the added tests expose the fact that re-fetching an updated row
misbehaves if the cursor used FOR UPDATE. That's an independent bug that
should be fixed later. Per report from Dharmendra Goyal.
join search order portion of the planner; this is specifically intended to
simplify developing a replacement for GEQO planning. Patch by Julius
Stroffek, editorialized on by me. I renamed make_one_rel_by_joins to
standard_join_search and make_rels_by_joins to join_search_one_level to better
reflect their place within this scheme.
(because they are uncorrelated with the immediate parent query). We were
charging the full run cost to the parent node, disregarding the fact that
only one row need be fetched for EXISTS. While this would only be a
cosmetic issue in most cases, it might possibly affect planning outcomes
if the parent query were itself a subquery to some upper query.
Per recent discussion with Steve Crawford.
the number of rows likely to be produced by a query such as
SELECT * FROM t1 LEFT JOIN t2 USING (key) WHERE t2.key IS NULL;
What this is doing is selecting for t1 rows with no match in t2, and thus
it may produce a significant number of rows even if the t2.key table column
contains no nulls at all. 8.2 thinks the table column's null fraction is
relevant and thus may estimate no rows out, which results in terrible plans
if there are more joins above this one. A proper fix for this will involve
passing much more information about the context of a clause to the selectivity
estimator functions than we ever have. There's no time left to write such a
patch for 8.3, and it wouldn't be back-patchable into 8.2 anyway. Instead,
put in an ad-hoc test to defeat the normal table-stats-based estimation when
an IS NULL test is evaluated at an outer join, and just use a constant
estimate instead --- I went with 0.5 for lack of a better idea. This won't
catch every case but it will catch the typical ways of writing such queries,
and it seems unlikely to make things worse for other queries.
ORDER BY <constant> as redundant. One is that this means query_planner()
has to canonicalize pathkeys even when the query jointree is empty;
the canonicalization was always a no-op in such cases before, but no more.
Also, we have to guard against thinking that a set-returning function is
"constant" for this purpose. Add a couple of regression tests for these
evidently under-tested cases. Per report from Greg Stark and subsequent
experimentation.
Along the way, allow FOR UPDATE in non-WITH-HOLD cursors; there may once
have been a reason to disallow that, but it seems to work now, and it's
really rather necessary if you want to select a row via a cursor and then
update it in a concurrent-safe fashion.
Original patch by Arul Shaji, rather heavily editorialized by Tom Lane.
from the other string-category types; this eliminates a lot of surprising
interpretations that the parser could formerly make when there was no directly
applicable operator.
Create a general mechanism that supports casts to and from the standard string
types (text,varchar,bpchar) for *every* datatype, by invoking the datatype's
I/O functions. These new casts are assignment-only in the to-string direction,
explicit-only in the other, and therefore should create no surprising behavior.
Remove a bunch of thereby-obsoleted datatype-specific casting functions.
The "general mechanism" is a new expression node type CoerceViaIO that can
actually convert between *any* two datatypes if their external text
representations are compatible. This is more general than needed for the
immediate feature, but might be useful in plpgsql or other places in future.
This commit does nothing about the issue that applying the concatenation
operator || to non-text types will now fail, often with strange error messages
due to misinterpreting the operator as array concatenation. Since it often
(not always) worked before, we should either make it succeed or at least give
a more user-friendly error; but details are still under debate.
Peter Eisentraut and Tom Lane
index key columns always have the type expected by the index's associated
operators, ie, we add RelabelType nodes when dealing with binary-compatible
index opclasses. This is needed to get varchar indexes to play nicely with
the new EquivalenceClass machinery, as per recent gripe from Josh Berkus that
CVS HEAD was failing to match a varchar index column to a constant restriction
in the query.
It seems likely that this change will allow removal of a lot of ugly ad-hoc
RelabelType-stripping that the planner has traditionally done while matching
expressions to other expressions, but I'll worry about that some other day.
inheritance child of an UPDATE/DELETE target relation can be excluded by
constraints. I had rearranged some code in set_append_rel_pathlist() to
avoid "useless" work when a child is excluded, but overdid it and left
the child with no cheapest_path entry, causing possible failure later
if the appendrel was involved in a join. Also, it seems that the dummy
plan generated by inheritance_planner() when all branches are excluded
has to be a bit less dummy now than was required in 8.2.
Per report from Jan Wieck. Add his test case to the regression tests.
cheapest-startup-cost innerjoin indexscans, and make joinpath.c consider
both of these (when different) as the inside of a nestloop join. The
original design was based on the assumption that indexscan paths always
have negligible startup cost, and so total cost is the only important
figure of merit; an assumption that's obviously broken by bitmap
indexscans. This oversight could lead to choosing poor plans in cases
where fast-start behavior is more important than total cost, such as
LIMIT and IN queries. 8.1-vintage brain fade exposed by an example from
Chuck D.
is using mark/restore but not rewind or backward-scan capability. Insert a
materialize plan node between a mergejoin and its inner child if the inner
child is a sort that is expected to spill to disk. The materialize shields
the sort from the need to do mark/restore and thereby allows it to perform
its final merge pass on-the-fly; while the materialize itself is normally
cheap since it won't spill to disk unless the number of tuples with equal
key values exceeds work_mem.
Greg Stark, with some kibitzing from Tom Lane.
need be returned. We keep a heap of the current best N tuples and sift-up
new tuples into it as we scan the input. For M input tuples this means
only about M*log(N) comparisons instead of M*log(M), not to mention a lot
less workspace when N is small --- avoiding spill-to-disk for large M
is actually the most attractive thing about it. Patch includes planner
and executor support for invoking this facility in ORDER BY ... LIMIT
queries. Greg Stark, with some editorialization by moi.
are mostly excluded by constraints: do the CE test a bit earlier to save
some adjust_appendrel_attrs() work on excluded children, and arrange to
use array indexing rather than rt_fetch() to fetch RTEs in the main body
of the planner. The latter is something I'd wanted to do for awhile anyway,
but seeing list_nth_cell() as 35% of the runtime gets one's attention.
competing alternatives for indexes to use in a bitmap scan. The former
coding took estimated selectivity as an overriding factor, causing it to
sometimes choose indexes that were much slower to scan than ones with a
slightly worse selectivity. It was also too narrow-minded about which
combinations of indexes to consider ANDing. The rewrite makes it pay more
attention to index scan cost than selectivity; this seems sane since it's
impossible to have very bad selectivity with low cost, whereas the reverse
isn't true. Also, we now consider each index alone, as well as adding
each index to an AND-group led by each prior index, for a total of about
O(N^2) rather than O(N) combinations considered. This makes the results
much less dependent on the exact order in which the indexes are
considered. It's still a lot cheaper than an O(2^N) exhaustive search.
A prefilter step eliminates all but the cheapest of those indexes using
the same set of WHERE conditions, to keep the effective value of N down in
scenarios where the DBA has created lots of partially-redundant indexes.
possibly be any useful pathkeys --- to wit, queries with neither any
join clauses nor any ORDER BY request. It's nearly free to check for
this case and it saves a useful fraction of the planning time for simple
queries.
seen by code inspecting the expression. The best way to do this seems
to be to drop the original representation as a function invocation, and
instead make a special expression node type that represents applying
the element-type coercion function to each array element. In this way
the element function is exposed and will be checked for volatility.
Per report from Guillaume Smet.
First, genericcostestimate() was being way too liberal about including
partial-index conditions in its selectivity estimate, resulting in
substantial underestimates for situations such as an indexqual "x = 42"
used with an index on x "WHERE x >= 40 AND x < 50". While the code is
intentionally set up to favor selecting partial indexes when available,
this was too much...
Second, choose_bitmap_and() was likewise easily fooled by cases of this
type, since it would similarly think that the partial index had selectivity
independent of the indexqual.
Fixed by using predicate_implied_by() rather than simple equality checks
to determine redundancy. This is a good deal more expensive but I don't
see much alternative. At least the extra cost is only paid when there's
actually a partial index under consideration.
Per report from Jeff Davis. I'm not going to risk back-patching this,
though.
available information about the typmod of an expression; namely, Const,
ArrayRef, ArrayExpr, and EXPR and ARRAY SubLinks. In the ArrayExpr and
SubLink cases it wasn't really the data structure's fault, but exprTypmod()
being lazy. This seems like a good idea in view of the expected increase in
typmod usage from Teodor's work to allow user-defined types to have typmods.
In particular this responds to the concerns we had about eliminating the
special-purpose hack that exprTypmod() used to have for BPCHAR Consts.
We can now tell whether or not such a Const has been cast to a specific
length, and report or display properly if so.
initdb forced due to changes in stored rules.
useless substructure for its RangeTblEntry nodes. (I chose to keep using the
same struct node type and just zero out the link fields for unneeded info,
rather than making a separate ExecRangeTblEntry type --- it seemed too
fragile to have two different rangetable representations.)
Along the way, put subplans into a list in the toplevel PlannedStmt node,
and have SubPlan nodes refer to them by list index instead of direct pointers.
Vadim wanted to do that years ago, but I never understood what he was on about
until now. It makes things a *whole* lot more robust, because we can stop
worrying about duplicate processing of subplans during expression tree
traversals. That's been a constant source of bugs, and it's finally gone.
There are some consequent simplifications yet to be made, like not using
a separate EState for subplans in the executor, but I'll tackle that later.
storing mostly-redundant Query trees in prepared statements, portals, etc.
To replace Query, a new node type called PlannedStmt is inserted by the
planner at the top of a completed plan tree; this carries just the fields of
Query that are still needed at runtime. The statement lists kept in portals
etc. now consist of intermixed PlannedStmt and bare utility-statement nodes
--- no Query. This incidentally allows us to remove some fields from Query
and Plan nodes that shouldn't have been there in the first place.
Still to do: simplify the execution-time range table; at the moment the
range table passed to the executor still contains Query trees for subqueries.
initdb forced due to change of stored rules.
this code was last gone over, there wasn't really any alternative to
globals because we didn't have the PlannerInfo struct being passed all
through the planner code. Now that we do, we can restructure things
to avoid non-reentrancy. I'm fooling with this because otherwise I'd
have had to add another global variable for the planned compact
range table list.
considered when it is necessary to do so because of a join-order restriction
(that is, an outer-join or IN-subselect construct). The former coding was a
bit ad-hoc and inconsistent, and it missed some cases, as exposed by Mario
Weilguni's recent bug report. His specific problem was that an IN could be
turned into a "clauseless" join due to constant-propagation removing the IN's
joinclause, and if the IN's subselect involved more than one relation and
there was more than one such IN linking to the same upper relation, then the
only valid join orders involve "bushy" plans but we would fail to consider the
specific paths needed to get there. (See the example case added to the join
regression test.) On examining the code I wonder if there weren't some other
problem cases too; in particular it seems that GEQO was defending against a
different set of corner cases than the main planner was. There was also an
efficiency problem, in that when we did realize we needed a clauseless join
because of an IN, we'd consider clauseless joins against every other relation
whether this was sensible or not. It seems a better design is to use the
outer-join and in-clause lists as a backup heuristic, just as the rule of
joining only where there are joinclauses is a heuristic: we'll join two
relations if they have a usable joinclause *or* this might be necessary to
satisfy an outer-join or IN-clause join order restriction. I refactored the
code to have just one place considering this instead of three, and made sure
that it covered all the cases that any of them had been considering.
Backpatch as far as 8.1 (which has only the IN-clause form of the disease).
By rights 8.0 and 7.4 should have the bug too, but they accidentally fail
to fail, because the joininfo structure used in those releases preserves some
memory of there having once been a joinclause between the inner and outer
sides of an IN, and so it leads the code in the right direction anyway.
I'll be conservative and not touch them.
that overlap an outer join's min_righthand but aren't fully contained in it,
to support joining within the RHS after having performed an outer join that
can commute with this one. Aside from the direct fix in make_join_rel(),
fix has_join_restriction() and GEQO's desirable_join() to consider this
possibility. Per report from Ian Harding.
