per previous discussion on pghackers. Most of the duplicate code in
different AMs' ambuild routines has been moved out to a common routine
in index.c; this means that all index types now do the right things about
inserting recently-dead tuples, etc. (I also removed support for EXTEND
INDEX in the ambuild routines, since that's about to go away anyway, and
it cluttered the code a lot.) The retail indextuple deletion routines have
been replaced by a "bulk delete" routine in which the indexscan is inside
the access method. I haven't pushed this change as far as it should go yet,
but it should allow considerable simplification of the internal bookkeeping
for deletions. Also, add flag columns to pg_am to eliminate various
hardcoded tests on AM OIDs, and remove unused pg_am columns.
Fix rtree and gist index types to not attempt to store NULLs; before this,
gist usually crashed, while rtree managed not to crash but computed wacko
bounding boxes for NULL entries (which might have had something to do with
the performance problems we've heard about occasionally).
Add AtEOXact routines to hash, rtree, and gist, all of which have static
state that needs to be reset after an error. We discovered this need long
ago for btree, but missed the other guys.
Oh, one more thing: concurrent VACUUM is now the default.
in cases of qualified rules as well as unqualified ones. Tweak rules
test to avoid cluttering output with dummy SELECT results. Update
documentation to match code.
pg_stats to provide controlled (and, hopefully, more readable) access
to statistics. Comments on definition of pg_stats welcome.
I didn't force initdb, but the rules regress test will fail until you
do one.
Tom Lane). For the moment, only the OID/name variants are provided.
I didn't force initdb, but the additions to the 'privileges' regress
test won't pass until you do one.
inet(text), cidr(text): convert a text value into inet/cidr
set_masklen(inet): set masklen on the inet value
Patch also contains regression checks for these functions.
Alex Pilosov
It "make"s and "make check"s clean against current cvs tip.
There are now both Text and Name variants, and the regression test support
is rolled into the patch. Note that to be complete wrt Name based variants,
there are now 12 user visible versions of has_table_privilege:
has_table_privilege(Text usename, Text relname, Text priv_type)
has_table_privilege(Text usename, Name relname, Text priv_type)
has_table_privilege(Name usename, Text relname, Text priv_type)
has_table_privilege(Name usename, Name relname, Text priv_type)
has_table_privilege(Text relname, Text priv_type) /* assumes current_user */
has_table_privilege(Name relname, Text priv_type) /* assumes current_user */
has_table_privilege(Text usename, Oid reloid, Text priv_type)
has_table_privilege(Name usename, Oid reloid, Text priv_type)
has_table_privilege(Oid reloid, Text priv_type) /* assumes current_user */
has_table_privilege(Oid usesysid, Text relname, Text priv_type)
has_table_privilege(Oid usesysid, Name relname, Text priv_type)
has_table_privilege(Oid usesysid, Oid reloid, Text priv_type)
For the Text based inputs, a new internal function, get_Name is used
(shamelessly copied from get_seq_name in sequence.c) to downcase if not
quoted, or remove quotes if quoted, and truncate. I also added a few test
cases for the downcasing, quote removal, and Name based variants to the
regression test.
Joe Conway
pg_database now has unique indexes on oid and on datname.
pg_shadow now has unique indexes on usename and on usesysid.
pg_am now has unique index on oid.
pg_opclass now has unique index on oid.
pg_amproc now has unique index on amid+amopclaid+amprocnum.
Remove pg_rewrite's unnecessary index on oid, delete unused RULEOID syscache.
Remove index on pg_listener and associated syscache for performance reasons
(caching rows that are certain to change before you need 'em again is
rather pointless).
Change pg_attrdef's nonunique index on adrelid into a unique index on
adrelid+adnum.
Fix various incorrect settings of pg_class.relisshared, make that the
primary reference point for whether a relation is shared or not.
IsSharedSystemRelationName() is now only consulted to initialize relisshared
during initial creation of tables and indexes. In theory we might now
support shared user relations, though it's not clear how one would get
entries for them into pg_class &etc of multiple databases.
Fix recently reported bug that pg_attribute rows created for an index all have
the same OID. (Proof that non-unique OID doesn't matter unless it's
actually used to do lookups ;-))
There's no need to treat pg_trigger, pg_attrdef, pg_relcheck as bootstrap
relations. Convert them into plain system catalogs without hardwired
entries in pg_class and friends.
Unify global.bki and template1.bki into a single init script postgres.bki,
since the alleged distinction between them was misleading and pointless.
Not to mention that it didn't work for setting up indexes on shared
system relations.
Rationalize locking of pg_shadow, pg_group, pg_attrdef (no need to use
AccessExclusiveLock where ExclusiveLock or even RowExclusiveLock will do).
Also, hold locks until transaction commit where necessary.
for GRANT/REVOKE is now just that, not "CHANGE".
On the way, migrate some of the aclitem internal representation away from
the parser and build a real parse tree instead. Also add some 'const'
qualifiers.
right, but it failed to get the padding case right.
This was obscured by subsequent application of bpchar() in all but one
regression test case, and that one didn't fail in an obvious way ---
trailing blanks are hard to see. Add another test case to make it
more obvious if it breaks again.
when added by alter table add constraint. The first file
patches backend/commands/command.c and the latter is a patch
to the alter table regression test.
Stephan Szabo
to do that, but inconsistently.) Make bit type reject too short input,
too, per SQL. Since it no longer zero pads, 'zpbit*' has been renamed to
'bit*' in the source, hence initdb.
create_index_paths are not immediately discarded, but are available for
subsequent planner work. This allows avoiding redundant syscache lookups
in several places. Change interface to operator selectivity estimation
procedures to allow faster and more flexible estimation.
Initdb forced due to change of pg_proc entries for selectivity functions!
in referencing and referenced columns of an fk constraint
aren't comparable using '=' at constraint definition time
rather than insert/update time.
Stephan Szabo
a separate statement (though it can still be invoked as part of VACUUM, too).
pg_statistic redesigned to be more flexible about what statistics are
stored. ANALYZE now collects a list of several of the most common values,
not just one, plus a histogram (not just the min and max values). Random
sampling is used to make the process reasonably fast even on very large
tables. The number of values and histogram bins collected is now
user-settable via an ALTER TABLE command.
There is more still to do; the new stats are not being used everywhere
they could be in the planner. But the remaining changes for this project
should be localized, and the behavior is already better than before.
A not-very-related change is that sorting now makes use of btree comparison
routines if it can find one, rather than invoking '<' twice.
give consistent results for all datatypes. Types float4, float8, and
numeric were broken for NaN values; abstime, timestamp, and interval
were broken for INVALID values; timetz was just plain broken (some
possible pairs of values were neither < nor = nor >). Also clean up
text, bpchar, varchar, and bit/varbit to eliminate duplicate code and
thereby reduce the probability of similar inconsistencies arising in
the future.
(which failed miserably during DST) to just compare against a time
derived from a timestamp value.
Certainly not a direct check for a correct result, but should work
at any time of year.
in CREATE TABLE, but give a warning notice. Clean up inconsistent
handling of defaults and NOT NULL flags from multiply-inherited columns.
Per pghackers discussion 28-Mar through 30-Mar.
I posted this to the list a few days ago, but it was not addressed. Can
someone please make the changes to the src/test/regress/resultmap?
Thanks.
- brandon
option of CREATE DATABASE. In pg_regress, create regression database
from template0 to ensure that any installation-local cruft in template1
will not mess up the tests.
as previously discussed.
It makes AIX and IRIX not use DST for dates before 1970.
The following expected files need to be removed from the regression tests,
they contain wrong results and are not needed any more.
src/test/regress/expected/horology-1947-PDT.out
src/test/regress/expected/tinterval-1947-PDT.out
src/test/regress/expected/abstime-1947-PDT.out
Zeugswetter Andreas
are now separate files "postgres.h" and "postgres_fe.h", which are meant
to be the primary include files for backend .c files and frontend .c files
respectively. By default, only include files meant for frontend use are
installed into the installation include directory. There is a new make
target 'make install-all-headers' that adds the whole content of the
src/include tree to the installed fileset, for use by people who want to
develop server-side code without keeping the complete source tree on hand.
Cleaned up a whole lot of crufty and inconsistent header inclusions.
regression tests for Pgsql 7.1beta3 pass. This is very similr to the one I
submitted back in July for Linux/Alpha. Apparently non-x86 Linux machines
like to compute nth place float point digits like Sun/Solaris does?
Otherwise, 7.1beta3 runs without problems (i.e. all other
regression tests pass) on my Sparc 20 running Debian GNU/Linux 2.2.
Ryan Kirkpatrick
truncating to integer. Remove regress test that checks whether
4567890123456789 can be converted to float without loss; since that's
52 bits, it's on the hairy edge of failing with IEEE float8s, and indeed
rint seems to give platform-dependent results for it.
