IDENT_USERNAME_MAX is the maximum length of the information returned
by an ident server, per RFC 1413. Using it as the buffer size in peer
authentication is inappropriate. It was done here because of the
historical relationship between peer and ident authentication. To
reduce confusion between the two authenticaton methods and disentangle
their code, use a dynamically allocated buffer instead.
Discussion: https://www.postgresql.org/message-id/flat/c798fba5-8b71-4f27-c78e-37714037ea31%402ndquadrant.com
For historical reasons, the functions for peer authentication were
grouped under ident authentication. But they are really completely
separate, so give them their own section headings.
The additional newline seems to have accidentally been introduced in
2c03216d83, in 9.5. The newline is only issued when an FPW is
present for the block reference.
While there could be an argument that removing the newlines in the
back branches could cause a problem for somebody parsing the
pg_waldump output, the likelihood of that seems small enough. It seems
at least equally likely that the randomness of when newlines are
issued causes problems.
Author: Andres Freund
Discussion: https://postgr.es/m/20191029233341.4gnyau7e5v2lh5sc@alap3.anarazel.de
Backpatch: 9.5, like 2c03216d83.
When cancelling REINDEX CONCURRENTLY after swapping the old and new
indexes (for example interruption at step 5), the old index remains
around and is marked as invalid. The old index should also be manually
droppable to clean up the parent relation from any invalid indexes still
remaining. For a partition index reindexed, pg_class.relispartition was
not getting updated, causing the index to not be droppable as DROP INDEX
would look for dependencies in a partition tree, which do not exist
anymore after the swap phase is done.
The fix here is simple: when swapping the old and new indexes, make sure
that pg_class.relispartition is correctly switched, similarly to what is
done for the index name.
Reported-by: Justin Pryzby
Author: Michael Paquier
Discussion: https://postgr.es/m/20191015164047.GA22729@telsasoft.com
Backpatch-through: 12
Teach get_expr_result_type() to manufacture a tuple descriptor directly
from a RowExpr node. If the RowExpr has type RECORD, this is the only
way to get a tupdesc for its result, since even if the rowtype has been
blessed, we don't have its typmod available at this point. (If the
RowExpr has some named composite type, we continue to let the existing
code handle it, since the RowExpr might well not have the correct column
names embedded in it.)
This fixes assorted corner cases illustrated by the added regression
tests.
Discussion: https://postgr.es/m/10872.1572202006@sss.pgh.pa.us
Historically, psql consulted COMSPEC to spawn a shell in its \! command,
but we just invoked "cmd" when spawning shells in pg_ctl and pg_regress.
It seems better to rely on the environment variable, if it's set,
in all cases.
It's debatable whether this is a bug fix or just a behavioral change,
so no back-patch.
Juan José Santamaría Flecha
Discussion: https://postgr.es/m/16080-5d7f03222469f717@postgresql.org
Commit 9556aa01c rearranged the innards of text_position() in a way
that would make it not work for empty search strings. Which is fine,
because all callers of that code special-case an empty pattern in
some way. However, the primary use-case (text_position itself) got
special-cased incorrectly: historically it's returned 1 not 0 for
an empty search string. Restore the historical behavior.
Per complaint from Austin Drenski (via Shay Rojansky).
Back-patch to v12 where it got broken.
Discussion: https://postgr.es/m/CADT4RqAz7oN4vkPir86Kg1_mQBmBxCp-L_=9vRpgSNPJf0KRkw@mail.gmail.com
When swapping the dependencies of the old and new indexes, the code has
been correctly switching all links in pg_depend from the old to the new
index for both referencing and referenced entries. However it forgot
the fact that the new index may itself have existing entries in
pg_depend, like references to the parent table attributes. This
resulted in duplicated entries in pg_depend after running REINDEX
CONCURRENTLY.
Fix this problem by removing any existing entries in pg_depend on the
new index before switching the dependencies of the old index to the new
one. More regression tests are added to check the consistency of
entries in pg_depend for indexes, including partition indexes.
Author: Michael Paquier
Discussion: https://postgr.es/m/20191025064318.GF8671@paquier.xyz
Backpatch-through: 12
9155580 has changed the value of the first fake LSN for unlogged
relations from 1 to FirstNormalUnloggedLSN (aka 1000), GiST requiring a
non-zero LSN on some pages to allow an interlocking logic to work, but
its value was still initialized to 1 at the beginning of recovery or
after running pg_resetwal. This fixes the initialization for both code
paths.
Author: Takayuki Tsunakawa
Reviewed-by: Dilip Kumar, Kyotaro Horiguchi, Michael Paquier
Discussion: https://postgr.es/m/OSBPR01MB2503CE851940C17DE44AE3D9FE6F0@OSBPR01MB2503.jpnprd01.prod.outlook.com
Backpatch-through: 12
Remove SQL_LANGUAGES, which was eliminated in SQL:2008, and
SQL_PACKAGES and SQL_SIZING_PROFILES, which were eliminated in
SQL:2011. Since they were dropped by the SQL standard, the
information in them was no longer updated and therefore no longer
useful.
This also removes the feature-package association information in
sql_feature_packages.txt, but for the time begin we are keeping the
information which features are in the Core package (that is, mandatory
SQL features). Maybe at some point someone wants to invent a way to
store that that does not involve using the "package" mechanism
anymore.
Discussion https://www.postgresql.org/message-id/flat/91334220-7900-071b-9327-0c6ecd012017%402ndquadrant.com
It appears that libxml2 doesn't bother to set the "children" field of
an XML_NAMESPACE_DECL node to null; that field just contains garbage.
In v10 and v11, this can result in a crash in XMLTABLE(). The rewrite
done in commit 251cf2e27 fixed this, somewhat accidentally, in v12.
We're not going to back-patch 251cf2e27, however. The case apparently
doesn't have wide use, so rather than risk introducing other problems,
just add a safety check to throw an error.
Even though no bug manifests in v12/HEAD, add the relevant test case
there too, to prevent future regressions.
Chapman Flack (per private report)
pgtypeslib_extern.h contained fallback definitions of "bool", "FALSE",
and "TRUE". The latter two are just plain unused, and have been for
awhile. The former came into play only if there wasn't a macro
definition of "bool", which is true only if we aren't using <stdbool.h>.
However, it then defined bool as "char"; since commit d26a810eb that
conflicts with c.h's desire to use "unsigned char". We'd missed seeing
any bad effects of that due to accidental header inclusion order choices,
but dddf4cdc3 exposed that it was problematic.
To fix, let's just get rid of these definitions. They should not be
needed because everyplace in Postgres should be relying on c.h to
provide a definition for type bool. (Note that despite its name,
pgtypeslib_extern.h isn't exposed to any outside code; we don't
install it.)
This doesn't fully resolve the issue, because ecpglib.h is doing
similar things, but that seems to require more thought to fix.
Back-patch to v12 where d26a810eb came in, to forestall any unpleasant
surprises from future back-patched bug fixes.
Discussion: https://postgr.es/m/CAA4eK1LmaKO7Du9M9Lo=kxGU8sB6aL8fa3sF6z6d5yYYVe3BuQ@mail.gmail.com
Commit f8e5f156b added private state in postgres.c to track whether
a statement timeout is running. This seems like bad design to me;
timeout.c's private state should be the single source of truth about
that. We already fixed one bug associated with failure to keep those
states in sync (cf. be42015fc), and I've got little faith that we
won't find more in future. So get rid of postgres.c's local variable
by exposing a way to ask timeout.c whether a timeout is running.
(Obviously, such an inquiry is subject to race conditions, but it
seems fine for the purpose at hand.)
To make get_timeout_active() as cheap as possible, add a flag in
the per-timeout struct showing whether that timeout is active.
This allows some small savings elsewhere in timeout.c, mainly
elimination of unnecessary searches of the active_timeouts array.
While at it, fix enable_statement_timeout to not call disable_timeout
when statement_timeout is 0 and the timeout is not running. This
avoids a useless deschedule-and-reschedule-timeouts cycle, which
represents a significant savings (at least one kernel call) when
there is any other active timeout. Right now, there usually isn't,
but there are proposals around to change that.
Discussion: https://postgr.es/m/16035-456e6e69ebfd4374@postgresql.org
Historically, we started the timer (if StatementTimeout > 0) at the
beginning of a simple-Query message and usually let it run until the
end, so that the timeout limit applied to the entire query string,
and intra-string changes of the statement_timeout GUC had no effect.
But, confusingly, a COMMIT within the string would reset the state
and allow a fresh timeout cycle to start with the current setting.
Commit f8e5f156b changed the behavior of statement_timeout for extended
query protocol, and as an apparently-unintended side effect, a change in
the statement_timeout GUC during a multi-statement simple-Query message
might have an effect immediately --- but only if it was going from
"disabled" to "enabled".
This is all pretty confusing, not to mention completely undocumented.
Let's change things so that the timeout is always reset between queries
of a multi-query string, whether they're transaction control commands
or not. Thus the active timeout setting is applied to each query in
the string, separately. This costs a few more cycles if statement_timeout
is active, but it provides much more intuitive behavior, especially if one
changes statement_timeout in one of the queries of the string.
Also, add something to the documentation to explain all this.
Per bug #16035 from Raj Mohite. Although this is a bug fix, I'm hesitant
to back-patch it; conceivably somebody has worked out the old behavior
and is depending on it. (But note that this change should make the
behavior less restrictive in most cases, since the timeout will now
be applied to shorter segments of code.)
Discussion: https://postgr.es/m/16035-456e6e69ebfd4374@postgresql.org
The commit dddf4cdc3 tries to ensure that the Postgres header file
inclusions are in order based on their ASCII value. However, in one of
the case there is a header file dependency due to which we can't maintain
such order.
Author: Amit Kapila
Discussion: https://postgr.es/m/E1iNpHW-000855-1u@gemulon.postgresql.org
Phases 2 (building the new index) and 3 (validating the new index)
checked for interrupts outside a transaction context, having as
consequence to not release session-level locks taken on the parent
relation and the old and new indexes processed. This could for example
be triggered with statement_timeout and a bad timing, and would issue
confusing error messages when shutting down the session still holding
the locks (note that an assertion failure would be triggered first), on
top of more issues with concurrent sessions trying to take a lock that
would interfere with the SHARE UPDATE EXCLUSIVE locks hold here.
This moves all the interruption checks inside a transaction context.
Note that I have manually tested all interruptions to make sure that
invalid indexes can be cleaned up properly. Partition indexes still
have issues on their own with some missing dependency handling, which
will be dealt with in a follow-up patch.
Reported-by: Justin Pryzby
Author: Michael Paquier
Discussion: https://postgr.es/m/20191013025145.GC4475@telsasoft.com
Backpatch-through: 12
Commit a524f50d0f added
old_11_check_for_sql_identifier_data_type_usage(), but it did not use
the clearer database error list format added to the master branch in
commit 1634d36157. This commit fixes that.
Backpatch-through: master
In the first transaction run for REINDEX CONCURRENTLY, a thinko in the
existing logic caused two session locks to be taken on the old index,
causing the session lock on the newly-created index to be missed. This
made possible concurrent DDL commands (like ALTER INDEX) on the new
index while REINDEX CONCURRENTLY was processing from the point where the
first internal transaction committed.
This issue has been discovered while digging into another bug.
Author: Michael Paquier
Discussion: https://postgr.es/m/20191021074323.GB1869@paquier.xyz
Backpatch-through: 12
8ae0d47 marked those options as obsolete back in 2005, with the options
removed from the documentation. This removes the last references to
both options in the code which were kept around for compatibility
purposes with past commands.
Author: Alexander Lakhin
Discussion: https://postgr.es/m/5da284a2-62d9-e338-88d1-26ee5009d93e@gmail.com
A check was redundant. While on it, add an assertion to make sure that
the parsing routine is never called with a NULL input. All the code
paths currently calling the parsing routine are careful with NULL inputs
already, but future callers may forget that.
Reported-by: Peter Eisentraut, Lars Kanis
Discussion: https://postgr.es/m/ec64956b-4597-56b6-c3db-457d15250fe4@2ndquadrant.com
Backpatch-through: 12
Any callback set would have no meaning in the context of an exception.
As an autovacuum worker exits quickly in this context, this could be
only an issue within EmitErrorReport(), where the elog hook is for
example called. That's unlikely to going to be a problem, but let's be
clean and consistent with other code paths handling exceptions. This is
present since 2909419, which introduced autovacuum.
Author: Ashwin Agrawal
Reviewed-by: Tom Lane, Michael Paquier
Discussion: https://postgr.es/m/CALfoeisM+_+dgmAdAOHAu0k-ZpEHHqSSG=GRf3pKJGm8OqWX0w@mail.gmail.com
Backpatch-through: 9.4
While casting from timestamp to timestamptz we do timestamp2tm() then
tm2timestamp(). This commit eliminates call to tm2timestamp(). Instead, it
directly applies timezone offset to the original timestamp value. That makes
upcoming datetime overflow handling in jsonpath easier. That should also save
us some CPU cycles.
Discussion: https://postgr.es/m/CAPpHfdvRPRh_mTGar5WmDeRZ%3DU5dOXHdxspYYD%3D76m3knNGjXA%40mail.gmail.com
Author: Alexander Korotkov
Reviewed-by: Tom Lane
It emerges that recent versions of Windows (at least 2016 Standard)
spell this locale name as "Norwegian Bokmål_Norway.1252", defeating
our mapping code that translates "Norwegian (Bokmål)_Norway" to
something that's all-ASCII (cf commits db29620d4 and aa1d2fc5e).
Add another mapping entry to handle this spelling.
Per bug #16068 from Robert Ford. Like the previous patches,
back-patch to all supported branches.
Discussion: https://postgr.es/m/16068-4cb6eeaa7eb46d93@postgresql.org
Move the platform-dependent logic that sets CFLAGS_SL from
src/makefiles/Makefile.foo to src/template/foo, so that the value
is determined at configure time and thus is available while running
configure's tests.
On a couple of platforms this might save a few microseconds of build
time by eliminating a test that make otherwise has to do over and over.
Otherwise it's pretty much a wash for build purposes; in particular,
this makes no difference to anyone who might be overriding CFLAGS_SL
via a make option.
This patch in itself does nothing with the value and thus should not
change any behavior, though you'll probably have to re-run configure
to get a correctly updated Makefile.global. We'll use the new
configure variable in a follow-on patch.
Per gripe from Kyotaro Horiguchi. Back-patch to all supported branches,
because the follow-on patch is a portability bug fix.
Discussion: https://postgr.es/m/20191010.144533.263180400.horikyota.ntt@gmail.com
We memorize all internal and empty leaf pages in the 1st vacuum stage for
gist indexes. They are used in the 2nd stage, to delete all the empty
pages. There was a memory context page_set_context for this purpose, but
we never used it.
Reported-by: Amit Kapila
Author: Dilip Kumar
Reviewed-by: Amit Kapila
Backpatch-through: 12, where it got introduced
Discussion: https://postgr.es/m/CAA4eK1LGr+MN0xHZpJ2dfS8QNQ1a_aROKowZB+MPNep8FVtwAA@mail.gmail.com
The logic was correctly detecting a parsing failure, but the parsing
error did not get reported back to the client properly.
Reported-by: Ed Morley
Author: Lars Kanis
Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/a9b4cbd7-4ecb-06b2-ebd7-1739bbff3217@greiz-reinsdorf.de
Backpatch-through: 12
Commit e7a2217 has introduced stricter checks for integer values in
connection parameters for libpq. However this failed to correctly check
after trailing whitespaces, while leading whitespaces were discarded per
the use of strtol(3). This fixes and refactors the parsing logic to
handle both cases consistently. Note that trying to restrict the use of
trailing whitespaces can easily break connection strings like in ECPG
regression tests (these have allowed me to catch the parsing bug with
connect_timeout).
Author: Michael Paquier
Reviewed-by: Lars Kanis
Discussion: https://postgr.es/m/a9b4cbd7-4ecb-06b2-ebd7-1739bbff3217@greiz-reinsdorf.de
Backpatch-through: 12
There were some leftovers from ancient ad-hoc ways to build on
Windows, prior to the standardization on MSVC and MinGW. We don't
need to build a lib$(NAME)ddll.def (debug build, as opposed to
lib$(NAME)dll.def) for MinGW, since nothing uses that. We also don't
need to build the regular .def file during distprep, since the MinGW
build environment is perfectly capable of creating that normally at
build time.
Discussion: https://www.postgresql.org/message-id/flat/0f9db9f8-47b8-a48b-6ccc-15b22b412316%402ndquadrant.com
Without "b", a variant of the tas() code miscompiles on macOS 10.4.
This may also fix a compilation failure involving macOS 10.1. Today's
compilers have been allocating acceptable registers with or without this
change, but this future-proofs the code by precisely conveying the
acceptable registers. Back-patch to 9.4 (all supported versions).
Reviewed by Tom Lane.
Discussion: https://postgr.es/m/20191009063900.GA4066266@rfd.leadboat.com
Since pluggable storage has been introduced, those two routines have
been replaced by table_open/close, with some compatibility macros still
present to allow extensions to compile correctly with v12.
Some code paths using the old routines still remained, so replace them.
Based on the discussion done, the consensus reached is that it is better
to remove those compatibility macros so as nothing new uses the old
routines, so remove also the compatibility macros.
Discussion: https://postgr.es/m/20191017014706.GF5605@paquier.xyz
recovery_min_apply_delay parameter is intended for use with streaming
replication deployments. However, the document clearly explains that
the parameter will be honored in all cases if it's specified. So it should
take effect even if in archive recovery. But, previously, archive recovery
with recovery_min_apply_delay enabled always failed, and caused assertion
failure if --enable-caasert is enabled.
The cause of this problem is that; the ownership of recoveryWakeupLatch
that recovery_min_apply_delay uses was taken only when standby mode
is requested. So unowned latch could be used in archive recovery, and
which caused the failure.
This commit changes recovery code so that the ownership of
recoveryWakeupLatch is taken even in archive recovery. Which prevents
archive recovery with recovery_min_apply_delay from failing.
Back-patch to v9.4 where recovery_min_apply_delay was added.
Author: Fujii Masao
Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/CAHGQGwEyD6HdZLfdWc+95g=VQFPR4zQL4n+yHxQgGEGjaSVheQ@mail.gmail.com
In v11 or before, this setting could not take effect in crash recovery
because it's specified in recovery.conf and crash recovery always
starts without recovery.conf. But commit 2dedf4d9a8 integrated
recovery.conf into postgresql.conf and which unexpectedly allowed
this setting to take effect even in crash recovery. This is definitely
not good behavior.
To fix the issue, this commit makes crash recovery always ignore
recovery_min_apply_delay setting.
Back-patch to v12 where the issue was added.
Author: Fujii Masao
Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/CAHGQGwEyD6HdZLfdWc+95g=VQFPR4zQL4n+yHxQgGEGjaSVheQ@mail.gmail.com
Discussion: https://postgr.es/m/e445616d-023e-a268-8aa1-67b8b335340c@pgmasters.net
