This prevents the word "waiting" from briefly disappearing from the ps
status line when ResolveRecoveryConflictWithVirtualXIDs begins a new
iteration of the outer loop.
Along the way, remove some useless pgstat_report_waiting() calls;
the startup process doesn't appear in pg_stat_activity.
Fujii Masao
Purely cosmetic patch to make our coding standards more consistent ---
we were doing symbolic some places and octal other places. This patch
fixes all C-coded uses of mkdir, chmod, and umask. There might be some
other calls I missed. Inconsistency noted while researching tablespace
directory permissions issue.
First, avoid scanning the whole ProcArray once we know there
are at least commit_siblings active; second, skip the check
altogether if commit_siblings = 0.
Greg Smith
an old transaction running in the master, and a lot of transactions have
started and finished since, and a WAL-record is written in the gap between
the creating the running-xacts snapshot and WAL-logging it, recovery will fail
with "too many KnownAssignedXids" error. This bug was reported by
Joachim Wieland on Nov 19th.
In the same scenario, when fewer transactions have started so that all the
xids fit in KnownAssignedXids despite the first bug, a more serious bug
arises. We incorrectly initialize the clog code with the oldest still running
transaction, and when we see the WAL record belonging to a transaction with
an XID larger than one that committed already before the checkpoint we're
recovering from, we zero the clog page containing the already committed
transaction, leading to data loss.
In hindsight, trying to track xids in the known-assigned-xids array before
seeing the running-xacts record was too complicated. To fix that, hold
XidGenLock while the running-xacts snapshot is taken and WAL-logged. That
ensures that no transaction can begin or end in that gap, so that in recvoery
we know that the snapshot contains all transactions running at that point in
WAL.
removing an infrequently occurring race condition in Hot Standby.
An xid must be assigned before a lock appears in shared memory,
rather than immediately after, else GetRunningTransactionLocks()
may see InvalidTransactionId, causing assertion failures during
lock processing on standby.
Bug report and diagnosis by Fujii Masao, fix by me.
Similar conflicts were already avoided for related record types.
Massive over-caution resulted in a usability bug. Clear theoretical
basis for doing this is now confirmed by me.
Request to remove from Heikki (twice), over-caution by me.
dynamic pool of event handles, we can permanently assign one for each
shared latch. Thanks to that, we no longer need a separate shared memory
block for latches, and we don't need to know in advance how many shared
latches there is, so you no longer need to remember to update
NumSharedLatches when you introduce a new latch to the system.
wait until it is set. Latches can be used to reliably wait until a signal
arrives, which is hard otherwise because signals don't interrupt select()
on some platforms, and even when they do, there's race conditions.
On Unix, latches use the so called self-pipe trick under the covers to
implement the sleep until the latch is set, without race conditions. On
Windows, Windows events are used.
Use the new latch abstraction to sleep in walsender, so that as soon as
a transaction finishes, walsender is woken up to immediately send the WAL
to the standby. This reduces the latency between master and standby, which
is good.
Preliminary work by Fujii Masao. The latch implementation is by me, with
helpful comments from many people.
There is no reason that proc.c should have to get involved in this dirty hack
for letting the postmaster know which children are walsenders. Revert that
file to the way it was, and confine the kluge to pmsignal.c and postmaster.c.
Per gripe from Fujii Masao, though this is not exactly his proposed patch.
Categorize as DEVELOPER_OPTIONS and set context PGC_SIGHUP, as per Fujii,
but set the default to LOG because higher values aren't really sensible
(see the code for trace_recovery()). Fix the documentation to agree with
the code and to try to explain what the variable actually does. Get rid
of no-op calls trace_recovery(LOG), which accomplish nothing except to
demonstrate that this option confuses even its author.
to have different values in different processes of the primary server.
Also put it into the "Streaming Replication" GUC category; it doesn't belong
in "Standby Servers" because you use it on the master not the standby.
In passing also correct guc.c's idea of wal_keep_segments' category.
max_standby_streaming_delay, and revise the implementation to avoid assuming
that timestamps found in WAL records can meaningfully be compared to clock
time on the standby server. Instead, the delay limits are compared to the
elapsed time since we last obtained a new WAL segment from archive or since
we were last "caught up" to WAL data arriving via streaming replication.
This avoids problems with clock skew between primary and standby, as well
as other corner cases that the original coding would misbehave in, such
as the primary server having significant idle time between transactions.
Per my complaint some time ago and considerable ensuing discussion.
Do some desultory editing on the hot standby documentation, too.
During Hot Standby we need to check for buffer pin deadlocks when the
Startup process begins to wait, in case it never wakes up again. We
previously made the deadlock check immediately on the basis it was
cheap, though clearer thinking and prima facie evidence shows that
was too simple. Refactor existing code to make it easy to add in
deferral of deadlock check until deadlock_timeout allowing a good
reduction in deadlock checks since far few buffer pins are held for
that duration. It's worth doing anyway, though major goal is to
prevent further reports of context switching with high numbers of
users on occasional tests.
of requirements and documentation on LogStandbySnapshot(). Fixes
two minor bugs reported by Tom Lane that would lead to an incorrect
snapshot after transaction wraparound. Also fix two other problems
discovered that would give incorrect snapshots in certain cases.
ProcArrayApplyRecoveryInfo() substantially rewritten. Some minor
refactoring of xact_redo_apply() and ExpireTreeKnownAssignedTransactionIds().
MaxStandbyDelay. Use the GUC units mechanism for the value, and choose more
appropriate timestamp functions for performing tests with it. Make the
ps_activity manipulation in ResolveRecoveryConflictWithVirtualXIDs have
behavior similar to ps_activity code elsewhere, notably not updating the
display when update_process_title is off and not truncating the display
contents at an arbitrarily-chosen length. Improve the docs to be explicit
about what MaxStandbyDelay actually measures, viz the difference between
primary and standby servers' clocks, and the possible hazards if their clocks
aren't in sync.
confusion with streaming-replication settings. Also, change its default
value to "off", because of concern about executing new and poorly-tested
code during ordinary non-replicating operation. Per discussion.
In passing do some minor editing of related documentation.
rather than returning NULL for some-but-not-all failures as they used to.
Remove now-redundant tests for NULL from call sites.
We had to do something about this because many call sites were failing to
check for NULL; and changing it like this seems a lot more useful and
mistake-proof than adding checks to the call sites without them.
archival or hot standby should be WAL-logged, instead of deducing that from
other options like archive_mode. This replaces recovery_connections GUC in
the primary, where it now has no effect, but it's still used in the standby
to enable/disable hot standby.
Remove the WAL-logging of "unlogged operations", like creating an index
without WAL-logging and fsyncing it at the end. Instead, we keep a copy of
the wal_mode setting and the settings that affect how much shared memory a
hot standby server needs to track master transactions (max_connections,
max_prepared_xacts, max_locks_per_xact) in pg_control. Whenever the settings
change, at server restart, write a WAL record noting the new settings and
update pg_control. This allows us to notice the change in those settings in
the standby at the right moment, they used to be included in checkpoint
records, but that meant that a changed value was not reflected in the
standby until the first checkpoint after the change.
Bump PG_CONTROL_VERSION and XLOG_PAGE_MAGIC. Whack XLOG_PAGE_MAGIC back to
the sequence it used to follow, before hot standby and subsequent patches
changed it to 0x9003.
and be more tense about the locking requirements for it, to improve performance
in Hot Standby mode. In passing fix a few bugs and improve a number of
comments in the existing HS code.
Simon Riggs, with some editorialization by Tom
to handling of btree delete records mean that all snapshot
conflicts on standby now have a valid, useful latestRemovedXid.
Our earlier approach using LW_EXCLUSIVE was useful when we didnt
always have a valid value, though is no longer useful or necessary.
Asserts added to code path to prove and ensure this is the case.
This will reduce contention and improve performance of larger Hot
Standby servers.
through normal backends. Makes code clearer also, since we
avoid various Assert()s. Performance of snapshots taken
during recovery no longer depends upon number of read-only
backends.
so that we won't try to attach any context printouts to messages that get
emitted while exiting. Per report from Dennis Koegel, the context functions
won't necessarily work after we've started shutting down the backend, and it
seems possible that debug_query_string could be pointing at freed storage
as well. The context information doesn't seem particularly relevant to
such messages anyway, so there's little lost by suppressing it.
Back-patch to all supported branches. I can only demonstrate a crash with
log_disconnections messages back to 8.1, but the risk seems real in 8.0 and
before anyway.
In addition, add support for a "payload" string to be passed along with
each notify event.
This implementation should be significantly more efficient than the old one,
and is also more compatible with Hot Standby usage. There is not yet any
facility for HS slaves to receive notifications generated on the master,
although such a thing is possible in future.
Joachim Wieland, reviewed by Jeff Davis; also hacked on by me.
process. If startup waits on a buffer pin we send a request to all
backends to cancel themselves if they are holding the buffer pin
required and they are also waiting on a lock. If not, startup waits
until max_standby_delay before cancelling any backend waiting for
the requested buffer pin.
stage of required deadlock detection to allow re-enabling max_standby_delay
setting of -1, which is now essential in the absence of improved relation-
specific conflict resoluton. Requested by Greg Stark et al.
records for heap and btree. Minor change, mostly API changes to
pass through the required values. This is a simple change though
also provides the refactoring required for further enhancements
to conflict processing using the relOid. Changes only have effect
during Hot Standby.
woken by alarm we send SIGUSR1 to all backends requesting that they
check to see if they are blocking Startup process. If so, they throw
ERROR/FATAL as for other conflict resolutions. Deadlock stop gap
removed. max_standby_delay = -1 option removed to prevent deadlock.
Discuss the reasons for the lock type we hold on ProcArrayLock while deriving
the conflict list. Cover the idea of false positive conflicts and seemingly
strange effects on snapshot derivation.
