transformCreateStmt() adjusts the transformed statement's RangeVar
to specify the target schema explicitly, for the express reason
of making sure that auxiliary statements derived by parse
transformation operate on the right table. But the refactoring
I did in commit 502898192 got this wrong and passed the untransformed
RangeVar to expandTableLikeClause(). This could lead to assertion
failures or weird misbehavior if the wrong table was accessed.
Per report from Alexander Lakhin. Like the previous patch, back-patch
to all supported branches.
Discussion: https://postgr.es/m/05051f9d-b32b-cb35-6735-0e9f2ab86b5f@gmail.com
Bring the signal handling for startup-packet collection into line
with the policy established in commits bedadc732 and 8e19a8264,
namely don't risk running atexit callbacks when handling SIGQUIT.
Ideally, we'd not do so for SIGTERM or timeout interrupts either,
but that change seems a bit too risky for the back branches.
For now, just improve the comments in this area to describe the risk.
Also relocate where BackendInitialize re-disables these interrupts,
to minimize the code span where they're active. This doesn't buy
a whole lot of safety, but it can't hurt.
In passing, rename startup_die() to remove confusion about whether
it is for the startup process.
Like the previous commits, back-patch to all supported branches.
Discussion: https://postgr.es/m/1850884.1599601164@sss.pgh.pa.us
Commit 8e19a8264 changed the SIGQUIT handlers of almost all server
processes not to run atexit callbacks. The archiver process was
skipped, perhaps because it's not connected to shared memory; but
it's just as true here that running atexit callbacks in a signal
handler is unsafe. So let's make it work like the rest.
In HEAD and v13, we can use the common SignalHandlerForCrashExit
handler. Before that, just tweak pgarch_exit to use _exit(2)
explicitly.
Like the previous commit, back-patch to all supported branches.
Kyotaro Horiguchi, back-patching by me
Discussion: https://postgr.es/m/1850884.1599601164@sss.pgh.pa.us
Partitioning tuple route code assumes that the partition chosen while
descending the partition hierarchy is always the correct one. This is
true except when the partition is the default partition and another
partition has been added concurrently: the partition constraint changes
and we don't recheck it. This can lead to tuples mistakenly being added
to the default partition that should have been rejected.
Fix by rechecking the default partition constraint while descending the
hierarchy.
An isolation test based on the reproduction steps described by Hao Wu
(with tweaks for extra coverage) is included.
Backpatch to 12, where this bug came in with 898e5e3290a7.
Reported by: Hao Wu <hawu@vmware.com>
Author: Amit Langote <amitlangote09@gmail.com>
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/CA+HiwqFqBmcSSap4sFnCBUEL_VfOMmEKaQ3gwUhyfa4c7J_-nA@mail.gmail.com
Discussion: https://postgr.es/m/DM5PR0501MB3910E97A9EDFB4C775CF3D75A42F0@DM5PR0501MB3910.namprd05.prod.outlook.com
We reported the wrong types when complaining that an aggregate's
moving-aggregate implementation is inconsistent with its regular
implementation.
This was wrong since the feature was introduced, so back-patch
to all supported branches.
Jeff Janes
Discussion: https://postgr.es/m/CAMkU=1x808LH=LPhZp9mNSP0Xd1xDqEd+XeGcvEe48dfE6xV=A@mail.gmail.com
This is duplicative of an lstat that was just done by the calling
function (traverse_datadir), besides which we weren't really doing
anything with the results. There's not much point in checking to
see if someone removed the file since the previous lstat, since the
FILE_ACTION_REMOVE code would have to deal with missing-file cases
anyway. Moreover, the "exists = false" assignment was a dead store;
nothing was done with that value later.
A syscall saved is a syscall earned, so back-patch to 9.5
where this code was introduced.
Discussion: https://postgr.es/m/1221796.1599329320@sss.pgh.pa.us
I happened to notice that the new test case I added in b55b4dad9
falls over if one runs "make check" repeatedly; though not in branches
after v10. That's because it was assuming that tmp_check/pgpass
wouldn't exist already. However, it's only been since v11 that the
Makefiles forcibly remove all of tmp_check/ before starting a TAP run.
This fix to unlink the file is therefore strictly necessary only in
v10 ... but it seems wisest to do it across the board, rather than
let the test rely on external logic to get the conditions right.
Commit 3f60f690f only partially fixed the broken-status-tracking
issue in LogicalRepApplyLoop: we need ping_sent to have the same
lifetime as last_recv_timestamp. The effects are much less serious
than what that commit fixed, though. AFAICS this would just lead to
extra ping requests being sent, once per second until the sender
responds. Still, it's a bug, so backpatch to v10 as before.
Discussion: https://postgr.es/m/959627.1599248476@sss.pgh.pa.us
If this data is not collected, pg_dump segfaults if asked for column
inserts.
Fix by Fabrízio de Royes Mello
Backpatch to release 12 where the bug was introduced.
The "DROP ACCESS METHOD gist2" test will require locking the index
to be dropped and then its table; while most ordinary operations
lock a table first then its index. While no concurrent test scripts
should be touching fast_emp4000, autovacuum might chance to be
processing that table when the DROP runs, resulting in a deadlock
failure. This is pretty rare but we see it in the buildfarm from
time to time.
To fix, acquire a lock on fast_emp4000 before issuing the DROP.
Since the point of the exercise is mostly to prevent buildfarm
failures, back-patch to 9.6 where this test was introduced.
Discussion: https://postgr.es/m/839004.1599185607@sss.pgh.pa.us
Because sigsetjmp() will restore the initial state with signals blocked,
the code path in bgworker.c for reporting an error and exiting would
execute that way. Usually this is fairly harmless; but if a parallel
worker had an error message exceeding the shared-memory communication
buffer size (16K) it would lock up, because it would wait for a
resume-sending signal from its parallel leader which it would never
detect.
To fix, just unblock signals at the appropriate point.
This can be shown to fail back to 9.6. The lack of parallel query
infrastructure makes it difficult to provide a simple test case for
9.5; but I'm pretty sure the issue exists in some form there as well,
so apply the code change there too.
Vignesh C, reviewed by Bharath Rupireddy, Robert Haas, and myself
Discussion: https://postgr.es/m/CALDaNm1d1hHPZUg3xU4XjtWBOLCrA+-2cJcLpw-cePZ=GgDVfA@mail.gmail.com
We were already raising an error for DROP INDEX CONCURRENTLY on a
partitioned table, albeit a different and confusing one:
ERROR: DROP INDEX CONCURRENTLY must be first action in transaction
Change that to throw a more comprehensible error:
ERROR: cannot drop partitioned index \"%s\" concurrently
Michael Paquier authored the test case for indexes on temporary
partitioned tables.
Backpatch to 11, where indexes on partitioned tables were added.
Reported-by: Jan Mussler <jan.mussler@zalando.de>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/16594-d2956ca909585067@postgresql.org
Historically there's been a hard-wired assumption here that no line of
a .pgpass file could be as long as NAMEDATALEN*5 bytes. That's a bit
shaky to start off with, because (a) there's no reason to suppose that
host names fit in NAMEDATALEN, and (b) this figure fails to allow for
backslash escape characters. However, it fails completely if someone
wants to use a very long password, and we're now hearing reports of
people wanting to use "security tokens" that can run up to several
hundred bytes. Another angle is that the file is specified to allow
comment lines, but there's no reason to assume that long comment lines
aren't possible.
Rather than guessing at what might be a more suitable limit, let's
replace the fixed-size buffer with an expansible PQExpBuffer. That
adds one malloc/free cycle to the typical use-case, but that's surely
pretty cheap relative to the I/O this code has to do.
Also, add TAP test cases to exercise this code, because there was no
test coverage before.
This reverts most of commit 2eb3bc588, as there's no longer a need for
a warning message about overlength .pgpass lines. (I kept the explicit
check for comment lines, though.)
In HEAD and v13, this also fixes an oversight in 74a308cf5: there's not
much point in explicit_bzero'ing the line buffer if we only do so in two
of the three exit paths.
Back-patch to all supported branches, except that the test case only
goes back to v10 where src/test/authentication/ was added.
Discussion: https://postgr.es/m/4187382.1598909041@sss.pgh.pa.us
collectMatchBitmap() needs to re-find the index tuple it was previously
looking at, after transiently dropping lock on the index page it's on.
The tuple should still exist and be at its prior position or somewhere
to the right of that, since ginvacuum never removes tuples but
concurrent insertions could add one. However, there was a thinko in
that logic, to the effect of expecting any inserted tuples to have the
same index "attnum" as what we'd been scanning. Since there's no
physical separation of tuples with different attnums, it's not terribly
hard to devise scenarios where this fails, leading to transient "lost
saved point in index" errors. (While I've duplicated this with manual
testing, it seems impossible to make a reproducible test case with our
available testing technology.)
Fix by just continuing the scan when the attnum doesn't match.
While here, improve the error message used if we do fail, so that it
matches the wording used in btree for a similar case.
collectMatchBitmap()'s posting-tree code path was previously not
exercised at all by our regression tests. While I can't make
a regression test that exhibits the bug, I can at least improve
the code coverage here, so do that. The test case I made for this
is an extension of one added by 4b754d6c1, so it only works in
HEAD and v13; didn't seem worth trying hard to back-patch it.
Per bug #16595 from Jesse Kinkead. This has been broken since
multicolumn capability was added to GIN (commit 27cb66fdf),
so back-patch to all supported branches.
Discussion: https://postgr.es/m/16595-633118be8eef9ce2@postgresql.org
The trouble with doing this is that an apparently-constant subquery
output column isn't really constant if it is a grouping column that
appears in only some of the grouping sets. A qual using such a
column would be subject to incorrect const-folding after push-down,
as seen in bug #16585 from Paul Sivash.
To fix, just disable qual pushdown altogether if the sub-query has
nonempty groupingSets. While we could imagine far less restrictive
solutions, there is not much point in working harder right now,
because subquery_planner() won't move HAVING clauses to WHERE within
such a subquery. If the qual stays in HAVING it's not going to be
a lot more useful than if we'd kept it at the outer level.
Having said that, this restriction could be removed if we used a
parsetree representation that distinguished such outputs from actual
constants, which is something I hope to do in future. Hence, make
the patch a minimal addition rather than integrating it more tightly
(e.g. by renumbering the existing items in subquery_is_pushdown_safe's
comment).
Back-patch to 9.5 where grouping sets were introduced.
Discussion: https://postgr.es/m/16585-9d8c340d23ade8c1@postgresql.org
If a CREATE TABLE command uses both LIKE and traditional inheritance,
Vars in CHECK constraints and expression indexes that are absorbed
from a LIKE parent table tended to get mis-numbered, resulting in
wrong answers and/or bizarre error messages (though probably not any
actual crashes, thanks to validation occurring in the executor).
In v12 and up, the same could happen to Vars in GENERATED expressions,
even in cases with no LIKE clause but multiple traditional-inheritance
parents.
The cause of the problem for LIKE is that parse_utilcmd.c supposed
it could renumber such Vars correctly during transformCreateStmt(),
which it cannot since we have not yet accounted for columns added via
inheritance. Fix that by postponing processing of LIKE INCLUDING
CONSTRAINTS, DEFAULTS, GENERATED, INDEXES till after we've performed
DefineRelation().
The error with GENERATED and multiple inheritance is a simple oversight
in MergeAttributes(); it knows it has to renumber Vars in inherited
CHECK constraints, but forgot to apply the same processing to inherited
GENERATED expressions (a/k/a defaults).
Per bug #16272 from Tom Gottfried. The non-GENERATED variants of the
issue are ancient, presumably dating right back to the addition of
CREATE TABLE LIKE; hence back-patch to all supported branches.
Discussion: https://postgr.es/m/16272-6e32da020e9a9381@postgresql.org
Commit a477bfc1d fixed eval_const_expressions() to ensure that it
didn't generate unnecessary RelabelType nodes, but I failed to notice
that some other places in the planner had the same issue. Really
noplace in the planner should be using plain makeRelabelType(), for
fear of generating expressions that should be equal() to semantically
equivalent trees, but aren't.
An example is that because canonicalize_ec_expression() failed
to be careful about this, we could end up with an equivalence class
containing both a plain Const, and a Const-with-RelabelType
representing exactly the same value. So far as I can tell this led to
no visible misbehavior, but we did waste a bunch of cycles generating
and evaluating "Const = Const-with-RelabelType" to prove such entries
are redundant.
Hence, move the support function added by a477bfc1d to where it can
be more generally useful, and use it in the places where planner code
previously used makeRelabelType.
Back-patch to v12, like the previous patch. While I have no concrete
evidence of any real misbehavior here, it's certainly possible that
I overlooked a case where equivalent expressions that aren't equal()
could cause a user-visible problem. In any case carrying extra
RelabelType nodes through planning to execution isn't very desirable.
Discussion: https://postgr.es/m/1311836.1597781384@sss.pgh.pa.us
A number of client programs have a "--progress" option that when printing
to a TTY, updates the current line by printing a '\r' and overwriting it.
After the last line, '\n' needs to be printed to move the cursor to the
next line. pg_basebackup and pgbench got this right, but pg_rewind and
pg_checksums were slightly wrong. pg_rewind printed the newline to stdout
instead of stderr, and pg_checksums printed the newline even when not
printing to a TTY. Fix them, and also add a 'finished' argument to
pg_basebackup's progress_report() function, to keep it consistent with
the other programs.
Backpatch to v12. pg_rewind's newline was broken with the logging changes
in commit cc8d415117 in v12, and pg_checksums was introduced in v12.
Discussion: https://www.postgresql.org/message-id/82b539e5-ae33-34b0-1aee-22b3379fd3eb@iki.fi
Several PGXN modules reference LockTagType values; renumbering would
force a recompile of those modules. Oversight in back-patch of today's
commit 566372b3d6435639e4cc4476d79b8505a0297c87. Back-patch to released
branches, v12 through 9.5.
Reported by Tom Lane.
Discussion: https://postgr.es/m/921383.1597523945@sss.pgh.pa.us
The SimpleLruTruncate() header comment states the new coding rule. To
achieve this, add locktype "frozenid" and two LWLocks. This closes a
rare opportunity for data loss, which manifested as "apparent
wraparound" or "could not access status of transaction" errors. Data
loss is more likely in pg_multixact, due to released branches' thin
margin between multiStopLimit and multiWrapLimit. If a user's physical
replication primary logged ": apparent wraparound" messages, the user
should rebuild standbys of that primary regardless of symptoms. At less
risk is a cluster having emitted "not accepting commands" errors or
"must be vacuumed" warnings at some point. One can test a cluster for
this data loss by running VACUUM FREEZE in every database. Back-patch
to 9.5 (all supported versions).
Discussion: https://postgr.es/m/20190218073103.GA1434723@rfd.leadboat.com
nodeSubplan.c expects that the testexpr for a hashable ANY SubPlan
has the form of one or more OpExprs whose LHS is an expression of the
outer query's, while the RHS is an expression over Params representing
output columns of the subquery. However, the planner only went as far
as verifying that the clauses were all binary OpExprs. This works
99.99% of the time, because the clauses have the right shape when
emitted by the parser --- but it's possible for function inlining to
break that, as reported by PegoraroF10. To fix, teach the planner
to check that the LHS and RHS contain the right things, or more
accurately don't contain the wrong things. Given that this has been
broken for years without anyone noticing, it seems sufficient to just
give up hashing when it happens, rather than go to the trouble of
commuting the clauses back again (which wouldn't necessarily work
anyway).
While poking at that, I also noticed that nodeSubplan.c had a baked-in
assumption that the number of hash clauses is identical to the number
of subquery output columns. Again, that's fine as far as parser output
goes, but it's not hard to break it via function inlining. There seems
little reason for that assumption though --- AFAICS, the only thing
it's buying us is not having to store the number of hash clauses
explicitly. Adding code to the planner to reject such cases would take
more code than getting nodeSubplan.c to cope, so I fixed it that way.
This has been broken for as long as we've had hashable SubPlans,
so back-patch to all supported branches.
Discussion: https://postgr.es/m/1549209182255-0.post@n3.nabble.com
Parallel-restoring a foreign key that references a partitioned table
with several levels of partitions can fail:
pg_restore: while PROCESSING TOC:
pg_restore: from TOC entry 6684; 2606 29166 FK CONSTRAINT fk fk_a_fkey postgres
pg_restore: error: could not execute query: ERROR: there is no unique constraint matching given keys for referenced table "pk"
Command was: ALTER TABLE fkpart3.fk
ADD CONSTRAINT fk_a_fkey FOREIGN KEY (a) REFERENCES fkpart3.pk(a);
This happens in parallel restore mode because some index partitions
aren't yet attached to the topmost partitioned index that the FK uses,
and so the index is still invalid. The current code marks the FK as
dependent on the first level of index-attach dump objects; the bug is
fixed by recursively marking the FK on their children.
Backpatch to 12, where FKs to partitioned tables were introduced.
Reported-by: Tom Lane <tgl@sss.pgh.pa.us>
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/3170626.1594842723@sss.pgh.pa.us
Backpatch: 12-master
Up to now, upon receipt of a SIGTERM ("smart shutdown" command), the
postmaster has immediately killed all "optional" background processes,
and subsequently refused to launch new ones while it's waiting for
foreground client processes to exit. No doubt this seemed like an OK
policy at some point; but it's a pretty bad one now, because it makes
for a seriously degraded environment for the remaining clients:
* Parallel queries are killed, and new ones fail to launch. (And our
parallel-query infrastructure utterly fails to deal with the case
in a reasonable way --- it just hangs waiting for workers that are
not going to arrive. There is more work needed in that area IMO.)
* Autovacuum ceases to function. We can tolerate that for awhile,
but if bulk-update queries continue to run in the surviving client
sessions, there's eventually going to be a mess. In the worst case
the system could reach a forced shutdown to prevent XID wraparound.
* The bgwriter and walwriter are also stopped immediately, likely
resulting in performance degradation.
Hence, let's rearrange things so that the only immediate change in
behavior is refusing to let in new normal connections. Once the last
normal connection is gone, shut everything down as though we'd received
a "fast" shutdown. To implement this, remove the PM_WAIT_BACKUP and
PM_WAIT_READONLY states, instead staying in PM_RUN or PM_HOT_STANDBY
while normal connections remain. A subsidiary state variable tracks
whether or not we're letting in new connections in those states.
This also allows having just one copy of the logic for killing child
processes in smart and fast shutdown modes. I moved that logic into
PostmasterStateMachine() by inventing a new state PM_STOP_BACKENDS.
Back-patch to 9.6 where parallel query was added. In principle
this'd be a good idea in 9.5 as well, but the risk/reward ratio
is not as good there, since lack of autovacuum is not a problem
during typical uses of smart shutdown.
Per report from Bharath Rupireddy.
Patch by me, reviewed by Thomas Munro
Discussion: https://postgr.es/m/CALj2ACXAZ5vKxT9P7P89D87i3MDO9bfS+_bjMHgnWJs8uwUOOw@mail.gmail.com
When a table is scanned by heapam_index_build_range_scan (née
IndexBuildHeapScan) and the table lock being held allows concurrent data
changes, it is possible for new HOT chains to sprout in a page that were
unknown when the scan of a page happened. This leads to an error such
as
ERROR: failed to find parent tuple for heap-only tuple at (X,Y) in table "tbl"
because the root tuple was not present when we first obtained the list
of the page's root tuples. This can be fixed by re-obtaining the list
of root tuples, if we see that a heap-only tuple appears to point to a
non-existing root.
This was reported by Anastasia as occurring for BRIN summarization
(which exists since 9.5), but I think it could theoretically also happen
with CREATE INDEX CONCURRENTLY (much older) or REINDEX CONCURRENTLY
(very recent). It seems a happy coincidence that BRIN forces us to
backpatch this all the way to 9.5.
Reported-by: Anastasia Lubennikova <a.lubennikova@postgrespro.ru>
Diagnosed-by: Anastasia Lubennikova <a.lubennikova@postgrespro.ru>
Co-authored-by: Anastasia Lubennikova <a.lubennikova@postgrespro.ru>
Co-authored-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/602d8487-f0b2-5486-0088-0f372b2549fa@postgrespro.ru
Backpatch: 9.5 - master
If a page range is desummarized at just the right time concurrently with
an index walk, BRIN would raise an error indicating index corruption.
This is scary and unhelpful; silently returning that the page range is
not summarized is sufficient reaction.
This bug was introduced by commit 975ad4e602ff as additional protection
against a bug whose actual fix was elsewhere. Backpatch equally.
Reported-By: Anastasia Lubennikova <a.lubennikova@postgrespro.ru>
Diagnosed-By: Alexander Lakhin <exclusion@gmail.com>
Discussion: https://postgr.es/m/2588667e-d07d-7e10-74e2-7e1e46194491@postgrespro.ru
Backpatch: 9.5 - master
This is like CVE-2018-1058 commit
582edc369cdbd348d68441fc50fa26a84afd0c1a. Today, a malicious user of a
publisher or subscriber database can invoke arbitrary SQL functions
under an identity running replication, often a superuser. This fix may
cause "does not exist" or "no schema has been selected to create in"
errors in a replication process. After upgrading, consider watching
server logs for these errors. Objects accruing schema qualification in
the wake of the earlier commit are unlikely to need further correction.
Back-patch to v10, which introduced logical replication.
Security: CVE-2020-14349
Any libpq client can use the header. Clients include backend components
postgres_fdw, dblink, and logical replication apply worker. Back-patch
to v10, because another fix needs this. In released branches, just copy
the header and keep the original.
Hostile objects located within the installation-time search_path could
capture references in an extension's installation or upgrade script.
If the extension is being installed with superuser privileges, this
opens the door to privilege escalation. While such hazards have existed
all along, their urgency increases with the v13 "trusted extensions"
feature, because that lets a non-superuser control the installation path
for a superuser-privileged script. Therefore, make a number of changes
to make such situations more secure:
* Tweak the construction of the installation-time search_path to ensure
that references to objects in pg_catalog can't be subverted; and
explicitly add pg_temp to the end of the path to prevent attacks using
temporary objects.
* Disable check_function_bodies within installation/upgrade scripts,
so that any security gaps in SQL-language or PL-language function bodies
cannot create a risk of unwanted installation-time code execution.
* Adjust lookup of type input/receive functions and join estimator
functions to complain if there are multiple candidate functions. This
prevents capture of references to functions whose signature is not the
first one checked; and it's arguably more user-friendly anyway.
* Modify various contrib upgrade scripts to ensure that catalog
modification queries are executed with secure search paths. (These
are in-place modifications with no extension version changes, since
it is the update process itself that is at issue, not the end result.)
Extensions that depend on other extensions cannot be made fully secure
by these methods alone; therefore, revert the "trusted" marking that
commit eb67623c9 applied to earthdistance and hstore_plperl, pending
some better solution to that set of issues.
Also add documentation around these issues, to help extension authors
write secure installation scripts.
Patch by me, following an observation by Andres Freund; thanks
to Noah Misch for review.
Security: CVE-2020-14350
Coverity pointed out, not unreasonably, that we checked fseeko's
result at every other call site but these. Failure to seek in the
temp file (note this is NOT pg_dump's output file) seems quite
unlikely, and even if it did happen the file length cross-check
further down would probably detect the problem. Still, that's a
poor excuse for not checking the result of a system call.
Ashutosh Bapat noticed that when logical walsender needs to wait for
WAL, and it realizes that it must send a keepalive message to
walreceiver to update the sent-LSN, which *does not* request a reply
from walreceiver, it wrongly sets the flag that it's going to wait for
that reply. That means that any future would-be sender of feedback
messages ends up not sending a feedback message, because they all
believe that a reply is expected.
With built-in logical replication there's not much harm in this, because
WalReceiverMain will send a ping-back every wal_receiver_timeout/2
anyway; but with other logical replication systems (e.g. pglogical) it
can cause significant pain.
This problem was introduced in commit 41d5f8ad734, where the
request-reply flag was changed from true to false to WalSndKeepalive,
without at the same time removing the line that sets
waiting_for_ping_response.
Just removing that line would be a sufficient fix, but it seems better
to shift the responsibility of setting the flag to WalSndKeepalive
itself instead of requiring caller to do it; this is clearly less
error-prone.
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reported-by: Ashutosh Bapat <ashutosh.bapat@2ndquadrant.com>
Backpatch: 9.5 and up
Discussion: https://postgr.es/m/20200806225558.GA22401@alvherre.pgsql
Commit 13838740f fixed some issues with step generation in partition
pruning, but there was yet another one: get_steps_using_prefix() assumes
that clauses in the passed-in prefix list are sorted in ascending order
of their partition key numbers, but the caller failed to ensure this for
range partitioning, which led to an assertion failure in debug builds.
Adjust the caller function to arrange the clauses in the prefix list in
the required order for range partitioning.
Back-patch to v11, like the previous commit.
Patch by me, reviewed by Amit Langote.
Discussion: https://postgr.es/m/CAPmGK16jkXiFG0YqMbU66wte-oJTfW6D1HaNvQf%3D%2B5o9%3Dm55wQ%40mail.gmail.com
The previous coding imagined that it could call before_shmem_exit()
when a non-exclusive backup began and then remove the previously-added
handler by calling cancel_before_shmem_exit() when that backup
ended. However, this only works provided that nothing else in the
system has registered a before_shmem_exit() hook in the interim,
because cancel_before_shmem_exit() is documented to remove a callback
only if it is the latest callback registered. It also only works
if nothing can ERROR out between the time that sessionBackupState
is reset and the time that cancel_before_shmem_exit(), which doesn't
seem to be strictly true.
To fix, leave the handler installed for the lifetime of the session,
arrange to install it just once, and teach it to quietly do nothing if
there isn't a non-exclusive backup in process.
This was originally committed to master as
303640199d0436c5e7acdf50b837a027b5726594, but I did not back-patch
at the time because the consequences were minor. However, now
there's been a second report of this causing trouble with a slightly
different test case than the one I reported originally, so now
I'm back-patching as far as v11 where JIT was introduced.
Patch by me, reviewed by Kyotaro Horiguchi, Michael Paquier (who
preferred a different approach, but got outvoted), Fujii Masao,
and Tom Lane, and with comments by various others. New problem
report from Bharath Rupireddy.
Discussion: http://postgr.es/m/CA+TgmobMjnyBfNhGTKQEDbqXYE3_rXWpc4CM63fhyerNCes3mA@mail.gmail.com
Discussion: http://postgr.es/m/CALj2ACWk7j4F2v2fxxYfrroOF=AdFNPr1WsV+AGtHAFQOqm_pw@mail.gmail.com
Since we no longer require AccessExclusiveLock to add a partition,
the executor may see that a partitioned table has more partitions
than the planner saw. ExecCreatePartitionPruneState's code for
matching up the partition lists in such cases was faulty, and would
misbehave if the planner had successfully pruned any partitions from
the query. (Thus, trouble would occur only if a partition addition
happens concurrently with a query that uses both static and dynamic
partition pruning.) This led to an Assert failure in debug builds,
and probably to crashes or query misbehavior in production builds.
To repair the bug, just explicitly skip zeroes in the plan's
relid_map[] list. I also made some cosmetic changes to make the code
more readable (IMO anyway). Also, convert the cross-checking Assert
to a regular test-and-elog, since it's now apparent that this logic
is more fragile than one would like.
Currently, there's no way to repeatably exercise this code, except
with manual use of a debugger to stop the backend between planning
and execution. Hence, no test case in this patch. We oughta do
something about that testability gap, but that's for another day.
Amit Langote and Tom Lane, per report from Justin Pryzby. Oversight
in commit 898e5e329; backpatch to v12 where that appeared.
Discussion: https://postgr.es/m/20200802181131.GA27754@telsasoft.com
A couple of test cases had connect_timeout=14, a value that seems
to have been plucked from a hat. While it's more than sufficient
for normal cases, slow/overloaded buildfarm machines can get a timeout
failure here, as per recent report from "sungazer". Increase to 180
seconds, which is in line with our typical timeouts elsewhere in
the regression tests.
Back-patch to 9.6; the code looks different in 9.5, and this doesn't
seem to be quite worth the effort to adapt to that.
Report: https://buildfarm.postgresql.org/cgi-bin/show_log.pl?nm=sungazer&dt=2020-08-04%2007%3A12%3A22
Instead of writing a query to psql's stdin, use -c. This avoids a
failure where psql exits before we write, seen a few times on the build
farm. Thanks to Tom Lane for the suggestion.
Back-patch to 11, where the LDAP tests arrived.
Reviewed-by: Noah Misch <noah@leadboat.com>
Discussion: https://postgr.es/m/CA%2BhUKGLFmW%2BHQYPeKiwSp5sdFFHtFViCpw4Mh6yAgEx74r5-Cw%40mail.gmail.com
The new hlCover() algorithm that I introduced in commit c9b0c678d
turns out to potentially take O(N^2) or worse time on long documents,
if there are many occurrences of individual query words but few or no
substrings that actually satisfy the query. (One way to hit this
behavior is with a "common_word & rare_word" type of query.) This
seems unavoidable given the original goal of checking every substring
of the document, so we have to back off that idea. Fortunately, it
seems unlikely that anyone would really want headlines spanning all of
a long document, so we can avoid the worse-than-linear behavior by
imposing a maximum length of substring that we'll consider.
For now, just hard-wire that maximum length as a multiple of max_words
times max_fragments. Perhaps at some point somebody will argue for
exposing it as a ts_headline parameter, but I'm hesitant to make such
a feature addition in a back-patched bug fix.
I also noted that the hlFirstIndex() function I'd added in that
commit was unnecessarily stupid: it really only needs to check whether
a HeadlineWordEntry's item pointer is null or not. This wouldn't make
all that much difference in typical cases with queries having just
a few terms, but a cycle shaved is a cycle earned.
In addition, add a CHECK_FOR_INTERRUPTS call in TS_execute_recurse.
This ensures that hlCover's loop is cancellable if it manages to take
a long time, and it may protect some other TS_execute callers as well.
Back-patch to 9.6 as the previous commit was. I also chose to add the
CHECK_FOR_INTERRUPTS call to 9.5. The old hlCover() algorithm seems
to avoid the O(N^2) behavior, at least on the test case I tried, but
nonetheless it's not very quick on a long document.
Per report from Stephen Frost.
Discussion: https://postgr.es/m/20200724160535.GW12375@tamriel.snowman.net
In the case of range partitioning, get_steps_using_prefix() assumes that
the passed-in prefix list contains at least one clause for each of the
partition keys earlier than one specified in the passed-in
step_lastkeyno, but the caller (ie, gen_prune_steps_from_opexps())
didn't take it into account, which led to a server crash or incorrect
results when the list contained no clauses for such partition keys, as
reported in bug #16500 and #16501 from Kobayashi Hisanori. Update the
caller to call that function only when the list created there contains
at least one clause for each of the earlier partition keys in the case
of range partitioning.
While at it, fix some other issues:
* The list to pass to get_steps_using_prefix() is allowed to contain
multiple clauses for the same partition key, as described in the
comment for that function, but that function actually assumed that the
list contained just a single clause for each of middle partition keys,
which led to an assertion failure when the list contained multiple
clauses for such partition keys. Update that function to match the
comment.
* In the case of hash partitioning, partition keys are allowed to be
NULL, in which case the list to pass to get_steps_using_prefix()
contains no clauses for NULL partition keys, but that function treats
that case as like the case of range partitioning, which led to the
assertion failure. Update the assertion test to take into account
NULL partition keys in the case of hash partitioning.
* Fix a typo in a comment in get_steps_using_prefix_recurse().
* gen_partprune_steps() failed to detect self-contradiction from
strict-qual clauses and an IS NULL clause for the same partition key
in some cases, producing incorrect partition-pruning steps, which led
to incorrect results of partition pruning, but didn't cause any
user-visible problems fortunately, as the self-contradiction is
detected later in the query planning. Update that function to detect
the self-contradiction.
Per bug #16500 and #16501 from Kobayashi Hisanori. Patch by me, initial
diagnosis for the reported issue and review by Dmitry Dolgov.
Back-patch to v11, where partition pruning was introduced.
Discussion: https://postgr.es/m/16500-d1613f2a78e1e090%40postgresql.org
Discussion: https://postgr.es/m/16501-5234a9a0394f6754%40postgresql.org
Some code paths dedicated to bytea used the structure for varchar. This
did not lead to any actual bugs, as bytea and varchar have the same
definition, but it could become a trap if one of these definitions
changes for a new feature or a bug fix.
Issue introduced by 050710b.
Author: Shenhao Wang
Reviewed-by: Vignesh C, Michael Paquier
Discussion: https://postgr.es/m/07ac7dee1efc44f99d7f53a074420177@G08CNEXMBPEKD06.g08.fujitsu.local
Backpatch-through: 12
