This function is written as though Gather doesn't project; but it does.
Even if it did not project, though, we must use build_path_tlist to ensure
that the output columns receive correct sortgroupref labeling.
Per report from Amit Kapila.
Refactor so that the internal APIs in planner.c deal in PathTargets not
targetlists, and establish a more regular structure for deriving the
targets needed for successive steps.
There is more that could be done here; calculating the eval costs of each
successive target independently is both inefficient and wrong in detail,
since we won't actually recompute values available from the input node's
tlist. But it's no worse than what happened before the pathification
rewrite. In any case this seems like a good starting point for considering
how to handle Konstantin Knizhnik's function-evaluation-postponement patch.
Instead of having planner.c compute a groupColIdx array and store it in
GroupingSetsPaths, make create_groupingsets_plan() find the grouping
columns by searching in the child plan node's tlist. Although that's
probably a bit slower for create_groupingsets_plan(), it's more like
the way every other plan node type does this, and it provides positive
confirmation that we know which child output columns we're supposed to be
grouping on. (Indeed, looking at this now, I'm not at all sure that it
wasn't broken before, because create_groupingsets_plan() isn't demanding
an exact tlist match from its child node.) Also, this allows substantial
simplification in planner.c, because it no longer needs to compute the
groupColIdx array at all; no other cases were using it.
I'd intended to put off this refactoring until later (like 9.7), but
in view of the likely bug fix and the need to rationalize planner.c's
tlist handling so we can do something sane with Konstantin Knizhnik's
function-evaluation-postponement patch, I think it can't wait.
I passed the wrong "root" struct to create_pathtarget in build_minmax_path.
Since the subroot is a clone of the outer root, this would not cause any
serious problems, but it would waste some cycles because
set_pathtarget_cost_width would not have access to Var width estimates
set up while running query_planner on the subroot.
This patch removes some redundant cost calculations that I left for later
cleanup in commit 3fc6e2d7f5. There's now a uniform policy that the
make_foo() convenience functions don't do any cost calculations. Most of
their callers copy costs from the source Path node, and for those that
don't, the calculation in the make_foo() function wasn't necessarily right
anyhow. (make_result() was particularly a mess, as it was serving multiple
callers using cost calcs designed for only the first one or two that had
ever existed.) Aside from saving a few cycles, this ensures that what
EXPLAIN prints matches the costs we used for planning purposes. It does
not change any planner decisions, since the decisions are already made.
I've been saying we needed to do this for more than five years, and here it
finally is. This patch removes the ever-growing tangle of spaghetti logic
that grouping_planner() used to use to try to identify the best plan for
post-scan/join query steps. Now, there is (nearly) independent
consideration of each execution step, and entirely separate construction of
Paths to represent each of the possible ways to do that step. We choose
the best Path or set of Paths using the same add_path() logic that's been
used inside query_planner() for years.
In addition, this patch removes the old restriction that subquery_planner()
could return only a single Plan. It now returns a RelOptInfo containing a
set of Paths, just as query_planner() does, and the parent query level can
use each of those Paths as the basis of a SubqueryScanPath at its level.
This allows finding some optimizations that we missed before, wherein a
subquery was capable of returning presorted data and thereby avoiding a
sort in the parent level, making the overall cost cheaper even though
delivering sorted output was not the cheapest plan for the subquery in
isolation. (A couple of regression test outputs change in consequence of
that. However, there is very little change in visible planner behavior
overall, because the point of this patch is not to get immediate planning
benefits but to create the infrastructure for future improvements.)
There is a great deal left to do here. This patch unblocks a lot of
planner work that was basically impractical in the old code structure,
such as allowing FDWs to implement remote aggregation, or rewriting
plan_set_operations() to allow consideration of multiple implementation
orders for set operations. (The latter will likely require a full
rewrite of plan_set_operations(); what I've done here is only to fix it
to return Paths not Plans.) I have also left unfinished some localized
refactoring in createplan.c and planner.c, because it was not necessary
to get this patch to a working state.
Thanks to Robert Haas, David Rowley, and Amit Kapila for review.
In commit 19a541143a I replaced RelOptInfo.width with
RelOptInfo.reltarget.width, but I missed updating debug_print_rel()
for that because it's not compiled by default.
Reported by Salvador Fandino, patch by Michael Paquier.
When converting an RTE with securityQuals into a security barrier
subquery RTE, ensure that the Vars in the new subquery's targetlist
all have varlevelsup = 0 so that they correctly refer to the
underlying base relation being wrapped.
The original code was creating new Vars by copying them from existing
Vars referencing the base relation found elsewhere in the query, but
failed to account for the fact that such Vars could come from sublink
subqueries, and hence have varlevelsup > 0. In practice it looks like
this could only happen with nested security barrier views, where the
outer view has a WHERE clause containing a correlated subquery, due to
the order in which the Vars are processed.
Bug: #13988
Reported-by: Adam Guthrie
Backpatch-to: 9.4, where updatable SB views were introduced
This is basically a bug fix; the old code assumes that a ForeignScan
is always parallel-safe, but for postgres_fdw, for example, this is
definitely false. It should be true for file_fdw, though, since a
worker can read a file from the filesystem just as well as any other
backend process.
Original patch by Thomas Munro. Documentation, and changes to the
comments, by me.
Up to now, there's been an assumption that all Paths for a given relation
compute the same output column set (targetlist). However, there are good
reasons to remove that assumption. For example, an indexscan on an
expression index might be able to return the value of an expensive function
"for free". While we have the ability to generate such a plan today in
simple cases, we don't have a way to model that it's cheaper than a plan
that computes the function from scratch, nor a way to create such a plan
in join cases (where the function computation would normally happen at
the topmost join node). Also, we need this so that we can have Paths
representing post-scan/join steps, where the targetlist may well change
from one step to the next. Therefore, invent a "struct PathTarget"
representing the columns we expect a plan step to emit. It's convenient
to include the output tuple width and tlist evaluation cost in this struct,
and there will likely be additional fields in future.
While Path nodes that actually do have custom outputs will need their own
PathTargets, it will still be true that most Paths for a given relation
will compute the same tlist. To reduce the overhead added by this patch,
keep a "default PathTarget" in RelOptInfo, and allow Paths that compute
that column set to just point to their parent RelOptInfo's reltarget.
(In the patch as committed, actually every Path is like that, since we
do not yet have any cases of custom PathTargets.)
I took this opportunity to provide some more-honest costing of
PlaceHolderVar evaluation. Up to now, the assumption that "scan/join
reltargetlists have cost zero" was applied not only to Vars, where it's
reasonable, but also PlaceHolderVars where it isn't. Now, we add the eval
cost of a PlaceHolderVar's expression to the first plan level where it can
be computed, by including it in the PathTarget cost field and adding that
to the cost estimates for Paths. This isn't perfect yet but it's much
better than before, and there is a way forward to improve it more. This
costing change affects the join order chosen for a couple of the regression
tests, changing expected row ordering.
If a GROUP BY clause includes all columns of a non-deferred primary key,
as well as other columns of the same relation, those other columns are
redundant and can be dropped from the grouping; the pkey is enough to
ensure that each row of the table corresponds to a separate group.
Getting rid of the excess columns will reduce the cost of the sorting or
hashing needed to implement GROUP BY, and can indeed remove the need for
a sort step altogether.
This seems worth testing for since many query authors are not aware of
the GROUP-BY-primary-key exception to the rule about queries not being
allowed to reference non-grouped-by columns in their targetlists or
HAVING clauses. Thus, redundant GROUP BY items are not uncommon. Also,
we can make the test pretty cheap in most queries where it won't help
by not looking up a rel's primary key until we've found that at least
two of its columns are in GROUP BY.
David Rowley, reviewed by Julien Rouhaud
In 61444bfb we started to allow HAVING clauses to be fully pushed down
into WHERE, even when grouping sets are in use. That turns out not to
work correctly, because grouping sets can "produce" NULLs, meaning that
filtering in WHERE and HAVING can have different results, even when no
aggregates or volatile functions are involved.
Instead only allow pushdown of empty grouping sets.
It'd be nice to do better, but the exact mechanics of deciding which
cases are safe are still being debated. It's important to give correct
results till we find a good solution, and such a solution might not be
appropriate for backpatching anyway.
Bug: #13863
Reported-By: 'wrb'
Diagnosed-By: Dean Rasheed
Author: Andrew Gierth
Reviewed-By: Dean Rasheed and Andres Freund
Discussion: 20160113183558.12989.56904@wrigleys.postgresql.org
Backpatch: 9.5, where grouping sets were introduced
When force_parallel_mode = true, we enable the parallel mode restrictions
for all queries for which this is believed to be safe. For the subset of
those queries believed to be safe to run entirely within a worker, we spin
up a worker and run the query there instead of running it in the
original process. When force_parallel_mode = regress, make additional
changes to allow the regression tests to run cleanly even though parallel
workers have been injected under the hood.
Taken together, this facilitates both better user testing and better
regression testing of the parallelism code.
Robert Haas, with help from Amit Kapila and Rushabh Lathia.
create_foreignscan_plan needs to know whether any system columns are
requested from a relation (this flag is needed by ForeignNext during
execution). However, for join relations this is a pointless test,
because it's not possible to request system columns from them, so
remove the check.
Author: Etsuro Fujita
Discussion: http://www.postgresql.org/message-id/56AA0FC5.9000207@lab.ntt.co.jp
Reviewed-by: David Rowley, Robert Haas
Previously, the foreign join pushdown infrastructure left the question
of security entirely up to individual FDWs, but it would be easy for
a foreign data wrapper to inadvertently open up subtle security holes
that way. So, make it the core code's job to determine which user
mapping OID is relevant, and don't attempt join pushdown unless it's
the same for all relevant relations.
Per a suggestion from Tom Lane. Shigeru Hanada and Ashutosh Bapat,
reviewed by Etsuro Fujita and KaiGai Kohei, with some further
changes by me.
Putting a reference to an expanded-format value into a Const node would be
a bad idea for a couple of reasons. It'd be possible for the supposedly
immutable Const to change value, if something modified the referenced
variable ... in fact, if the Const's reference were R/W, any function that
has the Const as argument might itself change it at runtime. Also, because
datumIsEqual() is pretty simplistic, the Const might fail to compare equal
to other Consts that it should compare equal to, notably including copies
of itself. This could lead to unexpected planner behavior, such as "could
not find pathkey item to sort" errors or inferior plans.
I have not been able to find any way to get an expanded value into a Const
within the existing core code; but Paul Ramsey was able to trigger the
problem by writing a datatype input function that returns an expanded
value.
The best fix seems to be to establish a rule that varlena values being
placed into Const nodes should be passed through pg_detoast_datum().
That will do nothing (and cost little) in normal cases, but it will flatten
expanded values and thereby avoid the above problems. Also, it will
convert short-header or compressed values into canonical format, which will
avoid possible unexpected lack-of-equality issues for those cases too.
And it provides a last-ditch defense against putting a toasted value into
a Const, which we already knew was dangerous, cf commit 2b0c86b665.
(In the light of this discussion, I'm no longer sure that that commit
provided 100% protection against such cases, but this fix should do it.)
The test added in commit 65c3d05e18 to catch datatype input functions
with unstable results would fail for functions that returned expanded
values; but it seems a bit uncharitable to deem a result unstable just
because it's expressed in expanded form, so revise the coding so that we
check for bitwise equality only after applying pg_detoast_datum(). That's
a sufficient condition anyway given the new rule about detoasting when
forming a Const.
Back-patch to 9.5 where the expanded-object facility was added. It's
possible that this should go back further; but in the absence of clear
evidence that there's any live bug in older branches, I'll refrain for now.
The core innovation of this patch is the introduction of the concept
of a partial path; that is, a path which if executed in parallel will
generate a subset of the output rows in each process. Gathering a
partial path produces an ordinary (complete) path. This allows us to
generate paths for parallel joins by joining a partial path for one
side (which at the baserel level is currently always a Partial Seq
Scan) to an ordinary path on the other side. This is subject to
various restrictions at present, especially that this strategy seems
unlikely to be sensible for merge joins, so only nested loops and
hash joins paths are generated.
This also allows an Append node to be pushed below a Gather node in
the case of a partitioned table.
Testing revealed that early versions of this patch made poor decisions
in some cases, which turned out to be caused by the fact that the
original cost model for Parallel Seq Scan wasn't very good. So this
patch tries to make some modest improvements in that area.
There is much more to be done in the area of generating good parallel
plans in all cases, but this seems like a useful step forward.
Patch by me, reviewed by Dilip Kumar and Amit Kapila.
Aggregate nodes now have two new modes: a "partial" mode where they
output the unfinalized transition state, and a "finalize" mode where
they accept unfinalized transition states rather than individual
values as input.
These new modes are not used anywhere yet, but they will be necessary
for parallel aggregation. The infrastructure also figures to be
useful for cases where we want to aggregate local data and remote
data via the FDW interface, and want to bring back partial aggregates
from the remote side that can then be combined with locally generated
partial aggregates to produce the final value. It may also be useful
even when neither FDWs nor parallelism are in play, as explained in
the comments in nodeAgg.c.
David Rowley and Simon Riggs, reviewed by KaiGai Kohei, Heikki
Linnakangas, Haribabu Kommi, and me.
This patch reduces pg_am to just two columns, a name and a handler
function. All the data formerly obtained from pg_am is now provided
in a C struct returned by the handler function. This is similar to
the designs we've adopted for FDWs and tablesample methods. There
are multiple advantages. For one, the index AM's support functions
are now simple C functions, making them faster to call and much less
error-prone, since the C compiler can now check function signatures.
For another, this will make it far more practical to define index access
methods in installable extensions.
A disadvantage is that SQL-level code can no longer see attributes
of index AMs; in particular, some of the crosschecks in the opr_sanity
regression test are no longer possible from SQL. We've addressed that
by adding a facility for the index AM to perform such checks instead.
(Much more could be done in that line, but for now we're content if the
amvalidate functions more or less replace what opr_sanity used to do.)
We might also want to expose some sort of reporting functionality, but
this patch doesn't do that.
Alexander Korotkov, reviewed by Petr Jelínek, and rather heavily
editorialized on by me.
There's no good reason for stomping on the input data; it makes the logic
in this function no simpler, in fact probably the reverse. And it makes
it impossible to separate path generation from plan generation, as I'm
working towards doing; that will require more than one traversal of these
lists.
Improve comments and make it a shade less messy. I think we might want
to move all of this somewhere else later, but it needs to be more
readable first.
In passing, re-pgindent the file, affecting some recently-added comments
concerning parallel query planning.
Once upon a time it was necessary for grouping_planner() to determine
the tlist it wanted from the scan/join plan subtree before it called
query_planner(), because query_planner() would actually make a Plan using
that. But we refactored things a long time ago to delay construction of
the Plan tree till later, so there's no need to build that tlist until
(and indeed unless) we're ready to plaster it onto the Plan. The only
thing query_planner() cares about is what Vars are going to be needed for
the tlist, and it can perfectly well get that by looking at the real tlist
rather than some masticated version.
Well, actually, there is one minor glitch in that argument, which is that
make_subplanTargetList also adds Vars appearing only in HAVING to the
tlist it produces. So now we have to account for HAVING explicitly in
build_base_rel_tlists. But that just adds a few lines of code, and
I doubt it moves the needle much on processing time; we might be doing
pull_var_clause() twice on the havingQual, but before we had it scanning
dummy tlist entries instead.
This is a very small down payment on rationalizing grouping_planner
enough so it can be refactored.
The rationale for the way targetlist processing is done wasn't clearly
stated anywhere, and I for one had forgotten some of the details. Having
just painfully re-learned them, add some breadcrumbs for the next person.
This should have been part of the original commit, but was missed.
Pushing data between processes is expensive, so we definitely want
to project away unneeded columns here, just as we do for other nodes
like Sort and Hash that care about the volume of data.
When use_remote_estimate is enabled, consider adding ORDER BY to the
query we sending to the remote server so that we can use that ordered
data for a merge join. Commit f18c944b61
arranges to push down the query pathkeys, which seems like the case
mostly likely to be a win, but testing shows this can sometimes win,
too.
For a regular table, we know which indexes are present and therefore
test whether the ordering provided by each such index is useful. Here,
we take the opposite approach: guess what orderings would be useful if
they could be generated cheaply, and then ask the remote side what those
will cost.
Ashutosh Bapat, with very substantial cosmetic revisions by me. Also
reviewed by Rushabh Lathia.
We carry around information about if a given query has row security or
not to allow the plancache to use that information to invalidate a
planned query in the event that the environment changes.
Previously, the flag of one of the subqueries was simply being copied
into place to indicate if the query overall included RLS components.
That's wrong as we need the global OR of all subqueries. Fix by
changing the code to match how fireRIRules works, which is results
in OR'ing all of the flags.
Noted by Tom.
Back-patch to 9.5 where RLS was introduced.
I originally modeled this data structure on SpecialJoinInfo, but after
commit acfcd45cac that looks like a pretty poor decision.
All we really need is relid sets identifying laterally-referenced rels;
and most of the time, what we want to know about includes indirect lateral
references, a case the LateralJoinInfo data was unsuited to compute with
any efficiency. The previous commit redefined RelOptInfo.lateral_relids
as the transitive closure of lateral references, so that it easily supports
checking indirect references. For the places where we really do want just
direct references, add a new RelOptInfo field direct_lateral_relids, which
is easily set up as a copy of lateral_relids before we perform the
transitive closure calculation. Then we can just drop lateral_info_list
and LateralJoinInfo and the supporting code. This makes the planner's
handling of lateral references noticeably more efficient, and shorter too.
Such a change can't be back-patched into stable branches for fear of
breaking extensions that might be looking at the planner's data structures;
but it seems not too late to push it into 9.5, so I've done so.
More fuzz testing by Andreas Seltenreich exposed that the planner did not
cope well with chains of lateral references. If relation X references Y
laterally, and Y references Z laterally, then we will have to scan X on the
inside of a nestloop with Z, so for all intents and purposes X is laterally
dependent on Z too. The planner did not understand this and would generate
intermediate joins that could not be used. While that was usually harmless
except for wasting some planning cycles, under the right circumstances it
would lead to "failed to build any N-way joins" or "could not devise a
query plan" planner failures.
To fix that, convert the existing per-relation lateral_relids and
lateral_referencers relid sets into their transitive closures; that is,
they now show all relations on which a rel is directly or indirectly
laterally dependent. This not only fixes the chained-reference problem
but allows some of the relevant tests to be made substantially simpler
and faster, since they can be reduced to simple bitmap manipulations
instead of searches of the LateralJoinInfo list.
Also, when a PlaceHolderVar that is due to be evaluated at a join contains
lateral references, we should treat those references as indirect lateral
dependencies of each of the join's base relations. This prevents us from
trying to join any individual base relations to the lateral reference
source before the join is formed, which again cannot work.
Andreas' testing also exposed another oversight in the "dangerous
PlaceHolderVar" test added in commit 85e5e222b1. Simply rejecting
unsafe join paths in joinpath.c is insufficient, because in some cases
we will end up rejecting *all* possible paths for a particular join, again
leading to "could not devise a query plan" failures. The restriction has
to be known also to join_is_legal and its cohort functions, so that they
will not select a join for which that will happen. I chose to move the
supporting logic into joinrels.c where the latter functions are.
Back-patch to 9.3 where LATERAL support was introduced.
Commit e7cb7ee145 provided basic
infrastructure for allowing a foreign data wrapper or custom scan
provider to replace a join of one or more tables with a scan.
However, this infrastructure failed to take into account the need
for possible EvalPlanQual rechecks, and ExecScanFetch would fail
an assertion (or just overwrite memory) if such a check was attempted
for a plan containing a pushed-down join. To fix, adjust the EPQ
machinery to skip some processing steps when scanrelid == 0, making
those the responsibility of scan's recheck method, which also has
the responsibility in this case of correctly populating the relevant
slot.
To allow foreign scans to gain control in the right place to make
use of this new facility, add a new, optional RecheckForeignScan
method. Also, allow a foreign scan to have a child plan, which can
be used to correctly populate the slot (or perhaps for something
else, but this is the only use currently envisioned).
KaiGai Kohei, reviewed by Robert Haas, Etsuro Fujita, and Kyotaro
Horiguchi.
While convincing myself that commit 7e19db0c09 would solve both of
the problems recently reported by Andreas Seltenreich, I realized that
add_paths_to_joinrel's handling of LATERAL restrictions could be made
noticeably simpler and faster if we were to retain the minimum possible
parameterization for each joinrel (that is, the set of relids supplying
unsatisfied lateral references in it). We already retain that for
baserels, in RelOptInfo.lateral_relids, so we can use that field for
joinrels too.
I re-pgindent'd the files touched here, which affects some unrelated
comments.
This is, I believe, just a minor optimization not a bug fix, so no
back-patch.
It was possible for the planner to decide to join a LATERAL subquery to
the outer side of an outer join before the outer join itself is completed.
Normally that's fine because of the associativity rules, but it doesn't
work if the subquery contains a lateral reference to the inner side of the
outer join. In such a situation the outer join *must* be done first.
join_is_legal() missed this consideration and would allow the join to be
attempted, but the actual path-building code correctly decided that no
valid join path could be made, sometimes leading to planner errors such as
"failed to build any N-way joins".
Per report from Andreas Seltenreich. Back-patch to 9.3 where LATERAL
support was added.
Add a new flag, consider_parallel, to each RelOptInfo, indicating
whether a plan for that relation could conceivably be run inside of
a parallel worker. Right now, we're pretty conservative: for example,
it might be possible to defer applying a parallel-restricted qual
in a worker, and later do it in the leader, but right now we just
don't try to parallelize access to that relation. That's probably
the right decision in most cases, anyway.
Using the new flag, generate parallel sequential scan plans for plain
baserels, meaning that we now have parallel sequential scan in
PostgreSQL. The logic here is pretty unsophisticated right now: the
costing model probably isn't right in detail, and we can't push joins
beneath Gather nodes, so the number of plans that can actually benefit
from this is pretty limited right now. Lots more work is needed.
Nevertheless, it seems time to enable this functionality so that all
this code can actually be tested easily by users and developers.
Note that, if you wish to test this functionality, it will be
necessary to set max_parallel_degree to a value greater than the
default of 0. Once a few more loose ends have been tidied up here, we
might want to consider changing the default value of this GUC, but
I'm leaving it alone for now.
Along the way, fix a bug in cost_gather: the previous coding thought
that a Gather node's transfer overhead should be costed on the basis of
the relation size rather than the number of tuples that actually need
to be passed off to the leader.
Patch by me, reviewed in earlier versions by Amit Kapila.
In addition, this path fills in a number of missing bits and pieces in
the parallel infrastructure. Paths and plans now have a parallel_aware
flag indicating whether whatever parallel-aware logic they have should
be engaged. It is believed that we will need this flag for a number of
path/plan types, not just sequential scans, which is why the flag is
generic rather than part of the SeqScan structures specifically.
Also, execParallel.c now gives parallel nodes a chance to initialize
their PlanState nodes from the DSM during parallel worker startup.
Amit Kapila, with a fair amount of adjustment by me. Review of previous
patch versions by Haribabu Kommi and others.
Rather than filling a temporary array and then copying values to the
output array, we can generate the required random permutation in-place
using the Fisher-Yates shuffle algorithm. This is shorter as well as
more efficient than before. It's pretty unlikely that anyone would
notice a speed improvement, but shorter code is better.
Nathan Wagner, edited a bit by me
The original Gather code failed to mark a Gather node as not able to
do projection, but it couldn't, even though it did call initialize its
projection info via ExecAssignProjectionInfo. There doesn't seem to
be any good reason for this node not to have projection capability,
so clean things up so that it does. Without this, plans using Gather
nodes might need to carry extra Result nodes to do projection.
In order for this to be safe, the code which hands true serializability
will need to taught that the SIRead locks taken by a parallel worker
pertain to the same transaction as those taken by the parallel leader.
Some further changes may be needed as well. Until the necessary
adaptations are made, don't generate parallel plans in serializable
mode, and if a previously-generated parallel plan is used after
serializable mode has been activated, run it serially.
This fixes a bug in commit 7aea8e4f2d.
This fixes a long-standing bug which was discovered while investigating
the interaction between the new join pushdown code and the EvalPlanQual
machinery: if a ForeignScan appears on the inner side of a paramaterized
nestloop, an EPQ recheck would re-return the original tuple even if
it no longer satisfied the pushed-down quals due to changed parameter
values.
This fix adds a new member to ForeignScan and ForeignScanState and a
new argument to make_foreignscan, and requires changes to FDWs which
push down quals to populate that new argument with a list of quals they
have chosen to push down. Therefore, I'm only back-patching to 9.5,
even though the bug is not new in 9.5.
Etsuro Fujita, reviewed by me and by Kyotaro Horiguchi.
During expand_security_quals, we take the security barrier quals on an
RTE and create a subquery which evaluates the quals. During this, we
have to replace any variables in the outer query which refer to the
original RTE with references to the columns from the subquery.
We need to also perform that replacement for any Vars in the
append_rel_list.
Only backpatching to 9.5 as we only go through this process in 9.4 for
auto-updatable security barrier views, which UNION ALL queries aren't.
Discovered by Haribabu Kommi
Patch by Dean Rasheed
Four related issues:
1) attnos/varnos/resnos for EXCLUDED were out of sync when a column
after one dropped in the underlying relation was referenced.
2) References to whole-row variables (i.e. EXCLUDED.*) lead to errors.
3) It was possible to reference system columns in the EXCLUDED pseudo
relations, even though they would not have valid contents.
4) References to EXCLUDED were rewritten by the RLS machinery, as
EXCLUDED was treated as if it were the underlying relation.
To fix the first two issues, generate the excluded targetlist with
dropped columns in mind and add an entry for whole row
variables. Instead of unconditionally adding a wholerow entry we could
pull up the expression if needed, but doing it unconditionally seems
simpler. The wholerow entry is only really needed for ruleutils/EXPLAIN
support anyway.
The remaining two issues are addressed by changing the EXCLUDED RTE to
have relkind = composite. That fits with EXCLUDED not actually being a
real relation, and allows to treat it differently in the relevant
places. scanRTEForColumn now skips looking up system columns when the
RTE has a composite relkind; fireRIRrules() already had a corresponding
check, thereby preventing RLS expansion on EXCLUDED.
Also add tests for these issues, and improve a few comments around
excluded handling in setrefs.c.
Reported-By: Peter Geoghegan, Geoff Winkless
Author: Andres Freund, Amit Langote, Peter Geoghegan
Discussion: CAEzk6fdzJ3xYQZGbcuYM2rBd2BuDkUksmK=mY9UYYDugg_GgZg@mail.gmail.com,
CAM3SWZS+CauzbiCEcg-GdE6K6ycHE_Bz6Ksszy8AoixcMHOmsA@mail.gmail.com
Backpatch: 9.5, where ON CONFLICT was introduced
