A malicious server could inject psql meta-commands into plain-text
dump output (i.e., scripts created with pg_dump --format=plain,
pg_dumpall, or pg_restore --file) that are run at restore time on
the machine running psql. To fix, introduce a new "restricted"
mode in psql that blocks all meta-commands (except for \unrestrict
to exit the mode), and teach pg_dump, pg_dumpall, and pg_restore to
use this mode in plain-text dumps.
While at it, encourage users to only restore dumps generated from
trusted servers or to inspect it beforehand, since restoring causes
the destination to execute arbitrary code of the source superusers'
choice. However, the client running the dump and restore needn't
trust the source or destination superusers.
Reported-by: Martin Rakhmanov
Reported-by: Matthieu Denais <litezeraw@gmail.com>
Reported-by: RyotaK <ryotak.mail@gmail.com>
Suggested-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Noah Misch <noah@leadboat.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Security: CVE-2025-8714
Backpatch-through: 13
Small touch-up on commits 25505082f0 and 50fd428b2b. Fix the
formatting of the example messages in the documentation and adjust the
wording to match the code.
ALTER TABLE ... SET EXPRESSION AS removes statistics for the target column,
so running ANALYZE afterward is recommended. But this was previously not
documented, even though a similar recommendation exists for
ALTER TABLE ... SET DATA TYPE, which also clears the column's statistics.
This commit updates the documentation to include the ANALYZE recommendation
for SET EXPRESSION AS.
Since v18, virtual generated columns are supported, and these columns never
have statistics. Therefore, ANALYZE is not needed after SET DATA TYPE or
SET EXPRESSION AS when used on virtual generated columns. This commit also
updates the documentation to clarify that ANALYZE is unnecessary in such cases.
Back-patch the ANALYZE recommendation for SET EXPRESSION AS to v17
where the feature was introduced, and the note about virtual generated
columns to v18 where those columns were added.
Author: Yugo Nagata <nagata@sraoss.co.jp>
Reviewed-by: Fujii Masao <masao.fujii@gmail.com>
Discussion: https://postgr.es/m/20250804151418.0cf365bd2855d606763443fe@sraoss.co.jp
Backpatch-through: 17
It's possible to use a CHECK (col IS NOT NULL) constraint to skip
scanning a table for nulls when adding a NOT NULL constraint on the same
column. However, if the CHECK constraint is dropped on the same command
that the NOT NULL is added, this fails, i.e., makes the NOT NULL addition
slow. The best we can do about it at this stage is to document this so
that users aren't taken by surprise.
(In Postgres 18 you can directly add the NOT NULL constraint as NOT
VALID instead, so there's no longer much use for the CHECK constraint,
therefore no point in building mechanism to support the case better.)
Reported-by: Andrew <psy2000usa@yahoo.com>
Reviewed-by: David G. Johnston <david.g.johnston@gmail.com>
Discussion: https://postgr.es/m/175385113607.786.16774570234342968908@wrigleys.postgresql.org
When pg_recvlogical receives a SIGHUP signal, it closes the current
output file and reopens a new one. This is useful since it allows us to
rotate the output file by renaming the current file and sending a SIGHUP.
This behavior was previously undocumented. This commit adds
the missing documentation.
Back-patch to all supported versions.
Author: Fujii Masao <masao.fujii@gmail.com>
Reviewed-by: Shinya Kato <shinya11.kato@gmail.com>
Discussion: https://postgr.es/m/0977fc4f-1523-4ecd-8a0e-391af4976367@oss.nttdata.com
Backpatch-through: 13
The paragraph for introducing INSERT and COPY discussed how a file
could be used for bulk loading with COPY, without actually showing
what the file would look like. This adds a programlisting for the
file contents.
Backpatch to all supported branches since this example has lacked
the file contents since PostgreSQL 7.2.
Author: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Fujii Masao <masao.fujii@oss.nttdata.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/158017814191.19852.15019251381150731439@wrigleys.postgresql.org
Backpatch-through: 13
Previously, the documentation described the streaming option as a boolean,
which is outdated since it's no longer a boolean as of protocol version 4.
This could confuse users.
This commit updates the description to remove the "boolean" reference and
clearly list the valid values for the streaming option.
Back-patch to v16, where the streaming option changed to a non-boolean.
Author: Euler Taveira <euler@eulerto.com>
Reviewed-by: Fujii Masao <masao.fujii@gmail.com>
Discussion: https://postgr.es/m/8d21fb98-5c25-4dee-8387-e5a62b01ea7d@app.fastmail.com
Backpatch-through: 16
The grammar was a little shaky and confusing here, so word-smith it
a bit. Also, adjust the comments in pg_ident.conf.sample to use the
same terminology as the SGML docs, in particular "DATABASE-USERNAME"
not "PG-USERNAME".
Back-patch appropriate subsets. I did not risk changing
pg_ident.conf.sample in released branches, but it still seems OK
to change it in v18.
Reported-by: Alexey Shishkin <alexey.shishkin@enterprisedb.com>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: David G. Johnston <david.g.johnston@gmail.com>
Discussion: https://postgr.es/m/175206279327.3157504.12519088928605422253@wrigleys.postgresql.org
Backpatch-through: 13
The documentation for pg_replication_slots previously mentioned only
max_slot_wal_keep_size as a condition under which the wal_status column
could show unreserved or lost. However, since commit be87200,
replication slots can also be invalidated due to horizon or wal_level,
and since commit ac0e33136a, idle_replication_slot_timeout can also
trigger this state.
This commit updates the description of the wal_status column to
reflect that max_slot_wal_keep_size is not the only cause of the lost state.
Back-patched to v16, where the additional invalidation cases were introduced.
Author: Fujii Masao <masao.fujii@gmail.com>
Reviewed-by: Hayato Kuroda <kuroda.hayato@fujitsu.com>
Reviewed-by: Nisha Moond <nisha.moond412@gmail.com>
Discussion: https://postgr.es/m/78b34e84-2195-4f28-a151-5d204a382fdd@oss.nttdata.com
Backpatch-through: 16
The documentation previously stated that the wal_status column is NULL
if restart_lsn is NULL in the pg_replication_slots view. This is incorrect,
and wal_status can be "lost" even when restart_lsn is NULL.
This commit removes the incorrect description.
Back-patched to all supported versions.
Author: Fujii Masao <masao.fujii@gmail.com>
Reviewed-by: Nisha Moond <nisha.moond412@gmail.com>
Discussion: https://postgr.es/m/c9d23cdc-b5dd-455a-8ee9-f1f24d701d89@oss.nttdata.com
Backpatch-through: 13
Commit 1546e17f9d accidentally misspelled additionally as
additionaly. Backpatch to v17 to match where the original
commit was backpatched.
Author: Daniel Gustafsson <daniel@yesql.se>
Backpatch-through: 17
Protocol v4 introduces parallel streaming, which allows Stream Abort
messages to include additional abort information such as LSN and
timestamp. However, the current documentation only states, "This field is
available since protocol version 4," which may misleadingly suggest that
the fields are always present when using protocol v4.
This patch clarifies that the abort LSN and timestamp are included only
when parallel streaming is enabled, even under protocol v4.
Author: Anthonin Bonnefoy <anthonin.bonnefoy@datadoghq.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Backpatch-through: 16, where it was introduced
Discussion: https://postgr.es/m/CAO6_XqoKteQR1AnaR8iPcegbBE+HkAc2-g12rxN04yOt4-2ORg@mail.gmail.com
Previously, the UUID functions documentation defined the "UUID" index entry
to link to the UUID data type page, even though that entry already exists there.
Instead, the UUID functions page should define its own index entry linking
to itself.
This commit updates the UUID index entry in the UUID functions documentation
to point to the correct section, improving navigation and avoiding duplication.
Back-patch to all supported versions.
Author: Fujii Masao <masao.fujii@gmail.com>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Discussion: https://postgr.es/m/f33e0493-5773-4296-87c5-7ce459054cfe@oss.nttdata.com
Backpatch-through: 13
Specify whether the bucket bounds are inclusive or exclusive,
and improve some other vague language. Explain the behavior that
occurs when the "low" bound is greater than the "high" bound.
Make width_bucket_numeric's comment more like that for
width_bucket_float8, in particular noting that infinite
bounds are rejected (since they became possible in v14).
Reported-by: Ben Peachey Higdon <bpeacheyhigdon@gmail.com>
Author: Robert Treat <rob@xzilla.net>
Co-authored-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Dean Rasheed <dean.a.rasheed@gmail.com>
Discussion: https://postgr.es/m/2BD74F86-5B89-4AC1-8F13-23CED3546AC1@gmail.com
Backpatch-through: 13
In version 17 we added support for cross-partition EXCLUDE
constraints, as long as they included all partition key columns and
compared them with equality (see 8c852ba9a4). I updated the docs for
exclusion constraints, but I missed that the docs for CREATE TABLE
still said that they were not supported. This commit fixes that.
Author: Paul A. Jungwirth <pj@illuminatedcomputing.com>
Co-authored-by: Jeff Davis <pgsql@j-davis.com>
Discussion: https://postgr.es/m/c955d292-b92d-42d1-a2a0-1ec6715a2546@illuminatedcomputing.com
Backpatch-through: 17
Improve the clarity of LOG messages when a failover logical slot
synchronization fails, making the reasons more explicit for easier
debugging.
Update the documentation to outline scenarios where slot synchronization
can fail, especially during the initial sync, and emphasize that
pg_sync_replication_slot() is primarily intended for testing and
debugging purposes.
We also discussed improving the functionality of
pg_sync_replication_slot() so that it can be used reliably, but we would
take up that work for next version after some more discussion and review.
Reported-by: Suraj Kharage <suraj.kharage@enterprisedb.com>
Author: shveta malik <shveta.malik@gmail.com>
Reviewed-by: Zhijie Hou <houzj.fnst@fujitsu.com>
Reviewed-by: Peter Smith <smithpb2250@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Backpatch-through: 17, where it was introduced
Discussion: https://postgr.es/m/CAF1DzPWTcg+m+x+oVVB=y4q9=PYYsL_mujVp7uJr-_oUtWNGbA@mail.gmail.com
The documentation for the pg_authid system catalog and the
pg_shadow system view indicates that passwords might be stored in
cleartext, but that hasn't been possible for some time.
Oversight in commit eb61136dc7.
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/aD2yKkZro4nbl5ol%40nathan
Backpatch-through: 13
Commits 53af9491a0 and 2d5fe51405 fixed a number of problems with
foreign keys that reference partitioned tables, and a query to detect
already broken FKs was supplied with the release notes for 17.1, 16.5,
15.9, 14.14, 13.17. However, that query has a bug that causes it to
wrongly report self-referential foreign keys even when they are correct,
so if the user was to drop and rebuild the FKs as indicated, the query
would continue to report them as needing to be repaired. Here we fix
the query to not have that problem.
Reported-by: Paul Foerster <paul.foerster@gmail.com>
Discussion: https://postgr.es/m/5456A1D0-CD47-4315-9C65-71B27E7A2906@gmail.com
Backpatch-through: 13-17
The documentation for exported snapshots in logical decoding previously
stated that snapshot creation may fail on a hot standby. This is no longer
accurate, as snapshot exporting on standbys has been supported since
PostgreSQL 10. This commit removes the outdated description.
Additionally, the docs referred to the NOEXPORT_SNAPSHOT option to
suppress snapshot exporting in CREATE_REPLICATION_SLOT. However,
since PostgreSQL 15, NOEXPORT_SNAPSHOT is considered legacy syntax
and retained only for backward compatibility. This commit updates
the documentation for v15 and later to use the modern equivalent:
SNAPSHOT 'nothing'. The older syntax is preserved in documentation for
v14 and earlier.
Back-patched to all supported branches.
Reported-by: Kevin K Biju <kevinkbiju@gmail.com>
Author: Fujii Masao <masao.fujii@gmail.com>
Reviewed-by: Kevin K Biju <kevinkbiju@gmail.com>
Discussion: https://postgr.es/m/174791480466.798.17122832105389395178@wrigleys.postgresql.org
Backpatch-through: 13
SQL "SET search_path = 'pg_catalog, pg_temp'" is silently equivalent to
"SET search_path = pg_temp, pg_catalog, "pg_catalog, pg_temp"" instead
of the intended "SET search_path = pg_catalog, pg_temp". (The intent
was a two-element search path. With the single quotes, it instead
specifies one element with a comma and a space in the middle of the
element.) In addition to the SET statement, this affects SET clauses of
CREATE FUNCTION, ALTER ROLE, and ALTER DATABASE. It does not affect the
set_config() SQL function.
Though the documentation did not show an insecure command, remove single
quotes that could entice a reader to write an insecure command.
Back-patch to v13 (all supported versions).
Reported-by: Sven Klemm <sven@timescale.com>
Author: Sven Klemm <sven@timescale.com>
Backpatch-through: 13
Add a documentation warning to ts_headline() pointing out that, when
working with untrusted input documents, the output is not guaranteed
to be safe for direct inclusion in web pages. This is because, while
it does remove some XML tags from the input, it doesn't remove all
HTML markup, and so the result may be unsafe (e.g., it might permit
XSS attacks).
To guard against that, all HTML markup should be removed from the
input, making it plain text, or the output should be passed through an
HTML sanitizer.
In addition, document precisely what the default text search parser
recognises as valid XML tags, since that's what determines which XML
tags ts_headline() will remove.
Reported-by: Richard Neill <richard.neill@telos.digital>
Author: Dean Rasheed <dean.a.rasheed@gmail.com>
Reviewed-by: Noah Misch <noah@leadboat.com>
Backpatch-through: 13
Previously, a space was missing between "<option>--exclude-schema</option>"
and "for" in the pg_restore documentation. This commit fixes the typo by
adding the missing whitespace.
Back-patch to v17 where the typo was added.
Author: Lele Gaifax <lele@metapensiero.it>
Reviewed-by: Fujii Masao <masao.fujii@gmail.com>
Discussion: https://postgr.es/m/87lds3ysm0.fsf@metapensiero.it
Backpatch-through: 17
A PG 17 optimization allowed columns with NOT NULL constraints to skip
table scans for IS NULL queries, and to skip IS NOT NULL checks for IS
NOT NULL queries. This didn't work for domain types, since domain types
don't follow the IS NULL/IS NOT NULL constraint logic. To fix, disable
this optimization for domains for PG 17+.
Reported-by: Jan Behrens
Diagnosed-by: Tom Lane
Discussion: https://postgr.es/m/Z37p0paENWWUarj-@momjian.us
Backpatch-through: 17
