Most block-based table AMs will need the exact same implementation of
the relation_size callback as the heap, and if they use a standard
page layout, they will likely need an implementation of the
relation_estimate_size callback that is very similar to that of the
heap. Rearrange to facilitate code reuse.
Patch by me, reviewed by Michael Paquier, Daniel Gustafsson, and
Álvaro Herrera.
Discussion: http://postgr.es/m/CA+TgmoZ6DBPnP1E-vRpQZUJQijJFD54F+SR_pxGiAAS-MyrigA@mail.gmail.com
This fixes an embarrassing oversight I (Andres) made in 737a292b,
namely missing two place where liverows/deadrows were used when
converting those variables to pointers, leading to incrementing the
pointer, rather than the value.
It's not that actually that easy to trigger a crash: One needs tuples
deleted by the current transaction, followed by a tuple deleted in
another session, all in one page. Which is presumably why this hasn't
been noticed before.
Reported-By: Steve Singer
Author: Steve Singer
Discussion: https://postgr.es/m/c7988239-d42c-ddc4-41db-171b23b35e4f@ssinger.info
This puts back reverted commit de87a084c0a5, with some bug fixes.
When two (or more) transactions are waiting for transaction T1 to release a
tuple-level lock, and transaction T1 upgrades its lock to a higher level, a
spurious deadlock can be reported among the waiting transactions when T1
finishes. The simplest example case seems to be:
T1: select id from job where name = 'a' for key share;
Y: select id from job where name = 'a' for update; -- starts waiting for T1
Z: select id from job where name = 'a' for key share;
T1: update job set name = 'b' where id = 1;
Z: update job set name = 'c' where id = 1; -- starts waiting for T1
T1: rollback;
At this point, transaction Y is rolled back on account of a deadlock: Y
holds the heavyweight tuple lock and is waiting for the Xmax to be released,
while Z holds part of the multixact and tries to acquire the heavyweight
lock (per protocol) and goes to sleep; once T1 releases its part of the
multixact, Z is awakened only to be put back to sleep on the heavyweight
lock that Y is holding while sleeping. Kaboom.
This can be avoided by having Z skip the heavyweight lock acquisition. As
far as I can see, the biggest downside is that if there are multiple Z
transactions, the order in which they resume after T1 finishes is not
guaranteed.
Backpatch to 9.6. The patch applies cleanly on 9.5, but the new tests don't
work there (because isolationtester is not smart enough), so I'm not going
to risk it.
Author: Oleksii Kliukin
Discussion: https://postgr.es/m/B9C9D7CD-EB94-4635-91B6-E558ACEC0EC3@hintbits.com
Discussion: https://postgr.es/m/2815.1560521451@sss.pgh.pa.us
This reverts commits 3da73d6839dc and de87a084c0a5.
This code has some tricky corner cases that I'm not sure are correct and
not properly tested anyway, so I'm reverting the whole thing for next
week's releases (reintroducing the deadlock bug that we set to fix).
I'll try again afterwards.
Discussion: https://postgr.es/m/E1hbXKQ-0003g1-0C@gemulon.postgresql.org
When two (or more) transactions are waiting for transaction T1 to release a
tuple-level lock, and transaction T1 upgrades its lock to a higher level, a
spurious deadlock can be reported among the waiting transactions when T1
finishes. The simplest example case seems to be:
T1: select id from job where name = 'a' for key share;
Y: select id from job where name = 'a' for update; -- starts waiting for X
Z: select id from job where name = 'a' for key share;
T1: update job set name = 'b' where id = 1;
Z: update job set name = 'c' where id = 1; -- starts waiting for X
T1: rollback;
At this point, transaction Y is rolled back on account of a deadlock: Y
holds the heavyweight tuple lock and is waiting for the Xmax to be released,
while Z holds part of the multixact and tries to acquire the heavyweight
lock (per protocol) and goes to sleep; once X releases its part of the
multixact, Z is awakened only to be put back to sleep on the heavyweight
lock that Y is holding while sleeping. Kaboom.
This can be avoided by having Z skip the heavyweight lock acquisition. As
far as I can see, the biggest downside is that if there are multiple Z
transactions, the order in which they resume after X finishes is not
guaranteed.
Backpatch to 9.6. The patch applies cleanly on 9.5, but the new tests don't
work there (because isolationtester is not smart enough), so I'm not going
to risk it.
Author: Oleksii Kliukin
Discussion: https://postgr.es/m/B9C9D7CD-EB94-4635-91B6-E558ACEC0EC3@hintbits.com
There were a number of issues in the recent commits which include typos,
code and comments mismatch, leftover function declarations. Fix them.
Reported-by: Alexander Lakhin
Author: Alexander Lakhin, Amit Kapila and Amit Langote
Reviewed-by: Amit Kapila
Discussion: https://postgr.es/m/ef0c0232-0c1d-3a35-63d4-0ebd06e31387@gmail.com
Some of the wrapper functions didn't match the callback names. Many of
them due to staying "consistent" with historic naming of the wrapped
functionality. We decided that for most cases it's more important to
be for tableam to be consistent going forward, than with the past.
The one exception is beginscan/endscan/... because it'd have looked
odd to have systable_beginscan/endscan/... with a different naming
scheme, and changing the systable_* APIs would have caused way too
much churn (including breaking a lot of external users).
Author: Ashwin Agrawal, with some small additions by Andres Freund
Reviewed-By: Andres Freund
Discussion: https://postgr.es/m/CALfoeiugyrXZfX7n0ORCa4L-m834dzmaE8eFdbNR6PMpetU4Ww@mail.gmail.com
This is still using the 2.0 version of pg_bsd_indent.
I thought it would be good to commit this separately,
so as to document the differences between 2.0 and 2.1 behavior.
Discussion: https://postgr.es/m/16296.1558103386@sss.pgh.pa.us
Before this commit, when ANALYZE was run on a table and serializable
was used (either by virtue of an explicit BEGIN TRANSACTION ISOLATION
LEVEL SERIALIZABLE, or default_transaction_isolation being set to
serializable) a null pointer dereference lead to a crash.
The analyze scan doesn't need a snapshot (nor predicate locking), but
before this commit a scan only contained information about being a
bitmap or sample scan.
Refactor the option passing to the scan_begin callback to use a
bitmask instead. Alternatively we could have added a new boolean
parameter, but that seems harder to read. Even before this issue
various people (Heikki, Tom, Robert) suggested doing so.
These changes don't change the scan APIs outside of tableam. The flags
argument could be exposed, it's not necessary to fix this
problem. Also the wrapper table_beginscan* functions encapsulate most
of that complexity.
After these changes fixing the bug is trivial, just don't acquire
predicate lock for analyze style scans. That was already done for
bitmap heap scans. Add an assert that a snapshot is passed when
acquiring the predicate lock, so this kind of bug doesn't require
running with serializable.
Also add a comment about sample scans currently requiring predicate
locking the entire relation, that previously wasn't remarked upon.
Reported-By: Joe Wildish
Author: Andres Freund
Discussion:
https://postgr.es/m/4EA80A20-E9BF-49F1-9F01-5B66CAB21453@elusive.cxhttps://postgr.es/m/20190411164947.nkii4gaeilt4bui7@alap3.anarazel.dehttps://postgr.es/m/20190518203102.g7peu2fianukjuxm@alap3.anarazel.de
Instead add a tableam callback to do so. To avoid adding per
validation overhead, pass a scan to tuple_tid_valid. In heap's case
we'd otherwise incurred a RelationGetNumberOfBlocks() call for each
tid - which'd have added noticable overhead to nodeTidscan.c.
Author: Andres Freund
Reviewed-By: Ashwin Agrawal
Discussion: https://postgr.es/m/20190515185447.gno2jtqxyktylyvs@alap3.anarazel.de
Previously various parts of the code routed size requests through
RelationGetNumberOfBlocks[InFork]. That works if md.c is used by the
AM, but not otherwise.
Add a tableam callback to return the size of the table. As not every
AM will use postgres' BLCKSZ, have it return bytes, and have
RelationGetNumberOfBlocksInFork() round the byte size up into blocks.
To allow code outside of the AM to determine the actual relation size
map InvalidForkNumber the total size of a relation, as not every AM
might just need the postgres defined forks.
A few users of RelationGetNumberOfBlocks() ought to be converted away
from that. One case, the use of it to determine whether a tid is
valid, will be fixed in a follow up commit. Others will have to wait
for v13.
Author: Andres Freund
Discussion: https://postgr.es/m/20190423225201.3bbv6tbqzkb5w7cw@alap3.anarazel.de
For some reason both callsite and the implementation for heapam had
the meaning inverted (i.e. succeeded == true was passed in case of
conflict). That's confusing.
I (Andres) briefly pondered whether it'd be better to rename
table_complete_speculative's argument to 'bool specConflict' or such,
but decided not to. The 'complete' in the function name for me makes
`succeeded` sound a bit better.
Reported-By: Ashwin Agrawal, Melanie Plageman, Heikki Linnakangas
Discussion:
https://postgr.es/m/CALfoeitk7-TACwYv3hCw45FNPjkA86RfXg4iQ5kAOPhR+F1Y4w@mail.gmail.comhttps://postgr.es/m/97673451-339f-b21e-a781-998d06b1067c@iki.fi
The conditions listed in this comment have changed several times, and at
some point the thing that the "if so" referred to was negated.
The text was OK up to 9.6. It was differently wrong in v10, v11 and
master, so fix in all those versions.
The term "item pointer" should not be used to refer to ItemIdData
variables, since that is needlessly ambiguous. Only
ItemPointerData/ItemPointer variables should be called item pointers.
To fix, establish the convention that ItemIdData variables should always
be referred to either as "item identifiers" or "line pointers". The
term "item identifier" already predominates in docs and translatable
messages, and so should be the preferred alternative there.
Discussion: https://postgr.es/m/CAH2-Wz=c=MZQjUzde3o9+2PLAPuHTpVZPPdYxN=E4ndQ2--8ew@mail.gmail.com
This commit adds new parameter to VACUUM command, TRUNCATE,
which specifies that VACUUM should attempt to truncate off
any empty pages at the end of the table and allow the disk space
for the truncated pages to be returned to the operating system.
This parameter, if specified, overrides the vacuum_truncate
reloption. If neither the reloption nor the VACUUM option is
used, the default is true, as before.
Author: Fujii Masao
Reviewed-by: Julien Rouhaud, Masahiko Sawada
Discussion: https://postgr.es/m/CAD21AoD+qtrSDL=GSma4Wd3kLYLeRC0hPna-YAdkDeV4z156vg@mail.gmail.com
This feature was using a process local map to track the first few blocks
in the relation. The map was reset each time we get the block with enough
freespace. It was discussed that it would be better to track this map on
a per-relation basis in relcache and then invalidate the same whenever
vacuum frees up some space in the page or when FSM is created. The new
design would be better both in terms of API design and performance.
List of commits reverted, in reverse chronological order:
06c8a5090e Improve code comments in b0eaa4c51b.
13e8643bfc During pg_upgrade, conditionally skip transfer of FSMs.
6f918159a9 Add more tests for FSM.
9c32e4c350 Clear the local map when not used.
29d108cdec Update the documentation for FSM behavior..
08ecdfe7e5 Make FSM test portable.
b0eaa4c51b Avoid creation of the free space map for small heap relations.
Discussion: https://postgr.es/m/20190416180452.3pm6uegx54iitbt5@alap3.anarazel.de
Commit d2599ecfcc74 introduced some contorted, confused code around:
readers would think that it's possible for HeapTupleHeaderGetXmin return
a non-frozen value for some frozen tuples, which would be disastrous.
There's no actual bug, but it seems better to make it clearer.
Per gripe from Tom Lane and Andres Freund.
Discussion: https://postgr.es/m/30116.1555430496@sss.pgh.pa.us
The new nleft_dead_tuples and nleft_dead_itemids fields are confusing
and do not seem like the correct way forward. One of them is tested
via an assertion that can fail, as it has already done on buildfarm
member topminnow. Remove the assertion and the fields.
Change the logic for the case where a tuple is not initially pruned
by heap_page_prune but later diagnosed HEAPTUPLE_DEAD by
HeapTupleSatisfiesVacuum. Previously, tupgone = true was set in
that case, which leads to treating the tuple as one that will be
removed. In a normal vacuum, that's OK, because we'll remove
index entries for it and then the second heap pass will remove the
tuple itself, but when index cleanup is disabled, those things
don't happen, so we must instead treat it as a recently-dead
tuple that we have voluntarily chosen to keep.
Report and analysis by Tom Lane. This patch loosely based on one
from Masahiko Sawada, but I changed most of it.
Most of these stem from d25f519107 "tableam: relation creation, VACUUM
FULL/CLUSTER, SET TABLESPACE.".
1) To pass data to the relation_set_new_filenode()
RelationSetNewRelfilenode() was made to update RelationData.rd_rel
directly. That's not OK however, as it makes the relcache entries
temporarily inconsistent. Which among other scenarios is a problem
if a REINDEX targets an index on pg_class - the
CatalogTupleUpdate() in RelationSetNewRelfilenode(). Presumably
that was introduced because other places in the code do so - while
those aren't "good practice" they don't appear to be actively
buggy (e.g. because system tables may not be targeted).
I (Andres) should have caught this while reviewing and signficantly
evolving the code in that commit, mea culpa.
Fix that by instead passing in the new RelFileNode as separate
argument to relation_set_new_filenode() and rely on the relcache to
update the catalog entry. Also revert that the
RelationMapUpdateMap() call was changed to immediate, and undo some
other more unnecessary changes.
2) Document that the relation_set_new_filenode cannot rely on the
whole relcache entry to be valid. It might be worthwhile to
refactor the code to never have to rely on that, but given the way
heap_create() is currently coded, that'd be a large change.
3) ATExecSetTableSpace() shouldn't do FlushRelationBuffers() itself. A
table AM might not use shared buffers at all. Move to
index_copy_data() and heapam_relation_copy_data().
4) heapam_relation_set_new_filenode() previously sometimes accessed
rel->rd_rel->relpersistence rather than the `persistence`
argument. Code movement mistake.
5) Previously heapam_relation_set_new_filenode() re-opened the smgr
relation to create the init for, if necesary. Instead have
RelationCreateStorage() return the SMgrRelation and use it to
create the init fork.
6) Add a note about the danger of modifying the relcache directly to
ATExecSetTableSpace() - it's currently not a bug because there's a
check ERRORing for catalog tables.
Regression tests and assertion improvements that together trigger the
bug described in 1) will be added in a later commit, as there is a
related bug on all branches.
Reported-By: Michael Paquier
Diagnosed-By: Tom Lane and Andres Freund
Author: Andres Freund
Reviewed-By: Tom Lane
Discussion: https://postgr.es/m/20190418011430.GA19133@paquier.xyz
This allows table AMs that don't need these horizons. This was already
documented in the tableam relation_set_new_filenode callback, but an
assert prevented if from actually working (the test AM code contained
the change itself). Defang the asserts in the general code, and move
the stronger ones into heap AM.
Relatedly, after CLUSTER/VACUUM, we'd always assign a relfrozenxid /
relminmxid. Change the table_relation_copy_for_cluster() interface to
allow the AM to overwrite the horizons that get set on the pg_class
entry. This'd also in the future allow AMs like heap to compute a
relfrozenxid during rewrite that's the table's actual minimum rather
than a pre-determined value. Arguably it'd have been better to move
the whole computation / setting of those values into the callback, but
it seems likely that for other reasons it'd be better to be able to
use one value to vacuum/cluster multiple tables (e.g. a toast's
horizon shouldn't be different than the table's).
Reported-By: Heikki Linnakangas
Author: Andres Freund
Discussion: https://postgr.es/m/9a7fb9cc-2419-5db7-8840-ddc10c93f122@iki.fi
vacuum_truncate controls whether vacuum tries to truncate off
any empty pages at the end of the table. Previously vacuum always
tried to do the truncation. However, the truncation could cause
some problems; for example, ACCESS EXCLUSIVE lock needs to
be taken on the table during the truncation and can cause
the query cancellation on the standby even if hot_standby_feedback
is true. Setting this reloption to false can be helpful to avoid
such problems.
Author: Tsunakawa Takayuki
Reviewed-By: Julien Rouhaud, Masahiko Sawada, Michael Paquier, Kirk Jamison and Fujii Masao
Discussion: https://postgr.es/m/CAHGQGwE5UqFqSq1=kV3QtTUtXphTdyHA-8rAj4A=Y+e4kyp3BQ@mail.gmail.com
This commit fixes three, unfortunately related, issues:
1) Since 5db6df0c01, the introduction of DML via tableam, it was
possible to trigger "ERROR: unexpected table_lock_tuple status: 1"
when updating a row that was previously updated in the same
transaction - but only when the previously updated row was before
updated in a concurrent transaction (and READ COMMITTED was
used). The reason for that was that that case simply wasn't
expected. Fixing that lead to:
2) Even before the above commit, there were error checks (introduced
in 6868ed7491b7) preventing a row being updated by different
commands within the same statement (say in a function called by an
UPDATE) - but that check wasn't performed when the row was first
updated in a concurrent transaction - instead the second update was
silently skipped in that case. After this change we throw the same
error as we'd without the concurrent transaction.
3) The error messages (introduced in 6868ed7491b7) preventing such
updates emitted the same error message for both DELETE and
UPDATE ("tuple to be updated was already modified by an operation
triggered by the current command"). While that could be changed
separately, it made it hard to write tests that verify the correct
correct behavior of the code.
This commit changes heap's implementation of table_lock_tuple() to
return TM_SelfModified instead of TM_Invisible (previously loosely
modeled after EvalPlanQualFetch), and teaches nodeModifyTable.c to
handle that in response to table_lock_tuple() and not just in response
to table_(delete|update).
Additionally it fixes the wrong error message (see 3 above). The
comment for table_lock_tuple() is also adjusted to state that
TM_Deleted won't return information in TM_FailureData - it'll not
always be available.
This also adds tests to ensure that DELETE/UPDATE correctly error out
when affecting a row that concurrently was modified by another
transaction.
Author: Andres Freund
Reported-By: Tom Lane, when investigating a bug bug fix to another bug
by Amit Langote
Discussion: https://postgr.es/m/19321.1554567786@sss.pgh.pa.us
This adds table_multi_insert(), and converts COPY FROM, the only user
of heap_multi_insert, to it.
A simple conversion of COPY FROM use slots would have yielded a
slowdown when inserting into a partitioned table for some
workloads. Different partitions might need different slots (both slot
types and their descriptors), and dropping / creating slots when
there's constant partition changes is measurable.
Thus instead revamp the COPY FROM buffering for partitioned tables to
allow to buffer inserts into multiple tables, flushing only when
limits are reached across all partition buffers. By only dropping
slots when there've been inserts into too many different partitions,
the aforementioned overhead is gone. By allowing larger batches, even
when there are frequent partition changes, we actuall speed such cases
up significantly.
By using slots COPY of very narrow rows into unlogged / temporary
might slow down very slightly (due to the indirect function calls).
Author: David Rowley, Andres Freund, Haribabu Kommi
Discussion:
https://postgr.es/m/20180703070645.wchpu5muyto5n647@alap3.anarazel.dehttps://postgr.es/m/20190327054923.t3epfuewxfqdt22e@alap3.anarazel.de
This commit adds a new reloption, vacuum_index_cleanup, which
controls whether index cleanup is performed for a particular
relation by default. It also adds a new option to the VACUUM
command, INDEX_CLEANUP, which can be used to override the
reloption. If neither the reloption nor the VACUUM option is
used, the default is true, as before.
Masahiko Sawada, reviewed and tested by Nathan Bossart, Alvaro
Herrera, Kyotaro Horiguchi, Darafei Praliaskouski, and me.
The wording of the documentation is mostly due to me.
Discussion: http://postgr.es/m/CAD21AoAt5R3DNUZSjOoXDUY=naYPUOuffVsRzuTYMz29yLzQCA@mail.gmail.com
Valgrind was rightly complaining that IndexVacuumInfo->report_progress
(added by commit ab0dfc961b6a) was not being initialized in some code
paths. Repair.
Per buildfarm member lousyjack.
This uses the progress reporting infrastructure added by c16dc1aca5e0,
adding support for CREATE INDEX and CREATE INDEX CONCURRENTLY.
There are two pieces to this: one is index-AM-agnostic, and the other is
AM-specific. The latter is fairly elaborate for btrees, including
reportage for parallel index builds and the separate phases that btree
index creation uses; other index AMs, which are much simpler in their
building procedures, have simplistic reporting only, but that seems
sufficient, at least for non-concurrent builds.
The index-AM-agnostic part is fairly complete, providing insight into
the CONCURRENTLY wait phases as well as block-based progress during the
index validation table scan. (The index validation index scan requires
patching each AM, which has not been included here.)
Reviewers: Rahila Syed, Pavan Deolasee, Tatsuro Yamada
Discussion: https://postgr.es/m/20181220220022.mg63bhk26zdpvmcj@alvherre.pgsql
When asked for a slice of a TOAST entry, decompress enough to return the
slice instead of decompressing the entire object.
For use cases where the slice is at, or near, the beginning of the entry,
this avoids a lot of unnecessary decompression work.
This changes the signature of pglz_decompress() by adding a boolean to
indicate if it's ok for the call to finish before consuming all of the
source or destination buffers.
Author: Paul Ramsey
Reviewed-By: Rafia Sabih, Darafei Praliaskouski, Regina Obe
Discussion: https://postgr.es/m/CACowWR07EDm7Y4m2kbhN_jnys%3DBBf9A6768RyQdKm_%3DNpkcaWg%40mail.gmail.com
This replaces the previous calls of heap_sync() in places using
bulk-insert. By passing in the flags used for bulk-insert the AM can
decide (first at insert time and then during the finish call) which of
the optimizations apply to it, and what operations are necessary to
finish a bulk insert operation.
Also change HEAP_INSERT_* flags to TABLE_INSERT, and rename hi_options
to ti_options.
These changes are made even in copy.c, which hasn't yet been converted
to tableam. There's no harm in doing so.
Author: Andres Freund
Discussion: https://postgr.es/m/20180703070645.wchpu5muyto5n647@alap3.anarazel.de
This moves bitmap heap scan support to below an optional tableam
callback. It's optional as the whole concept of bitmap heapscans is
fairly block specific.
This basically moves the work previously done in bitgetpage() into the
new scan_bitmap_next_block callback, and the direct poking into the
buffer done in BitmapHeapNext() into the new scan_bitmap_next_tuple()
callback.
The abstraction is currently somewhat leaky because
nodeBitmapHeapscan.c's prefetching and visibilitymap based logic
remains - it's likely that we'll later have to move more into the
AM. But it's not trivial to do so without introducing a significant
amount of code duplication between the AMs, so that's a project for
later.
Note that now nodeBitmapHeapscan.c and the associated node types are a
bit misnamed. But it's not clear whether renaming wouldn't be a cure
worse than the disease. Either way, that'd be best done in a separate
commit.
Author: Andres Freund
Reviewed-By: Robert Haas (in an older version)
Discussion: https://postgr.es/m/20180703070645.wchpu5muyto5n647@alap3.anarazel.de
This moves sample scan support to below tableam. It's not optional as
there is, in contrast to e.g. bitmap heap scans, no alternative way to
perform tablesample queries. If an AM can't deal with the block based
API, it will have to throw an ERROR.
The tableam callbacks for this are block based, but given the current
TsmRoutine interface, that seems to be required.
The new interface doesn't require TsmRoutines to perform visibility
checks anymore - that requires the TsmRoutine to know details about
the AM, which we want to avoid. To continue to allow taking the
returned number of tuples account SampleScanState now has a donetuples
field (which previously e.g. existed in SystemRowsSamplerData), which
is only incremented after the visibility check succeeds.
Author: Andres Freund
Discussion: https://postgr.es/m/20180703070645.wchpu5muyto5n647@alap3.anarazel.de
An anti-wraparound vacuum has to be by definition aggressive as it needs
to work on all the pages of a relation. However it can happen that due
to some concurrent activity an anti-wraparound vacuum is marked as
non-aggressive, which makes it redundant with a previous run, and
it is actually useless as an anti-wraparound vacuum should process all
the pages of a relation. This commit makes such vacuums to be skipped.
An anti-wraparound vacuum not aggressive can be found easily by mixing
low values of autovacuum_freeze_max_age (to control anti-wraparound) and
autovacuum_freeze_table_age (to control the aggressiveness).
28a8fa9 has added some extra logging printing all the possible
combinations of anti-wraparound and aggressive vacuums, which now gets
simplified as an anti-wraparound vacuum also non-aggressive gets
skipped.
Per discussion mainly between Andrew Dunstan, Robert Haas, Álvaro
Herrera, Kyotaro Horiguchi, Masahiko Sawada, and myself.
Author: Kyotaro Horiguchi, Michael Paquier
Reviewed-by: Andrew Dunstan, Álvaro Herrera
Discussion: https://postgr.es/m/20180914153554.562muwr3uwujno75@alvherre.pgsql
This just moves the table/matview[/toast] determination of relation
size to a callback, and uses a copy of the existing logic to implement
that callback for heap.
It probably would make sense to also move the index specific logic
into a callback, so the metapage handling (and probably more) can be
index specific. But that's a separate task.
Author: Andres Freund
Discussion: https://postgr.es/m/20180703070645.wchpu5muyto5n647@alap3.anarazel.de
This is a relatively straightforward move of the current
implementation to sit below tableam. As the current analyze sampling
implementation is pretty inherently block based, the tableam analyze
interface is as well. It might make sense to generalize that at some
point, but that seems like a larger project that shouldn't be
undertaken at the same time as the introduction of tableam.
Author: Andres Freund
Discussion: https://postgr.es/m/20180703070645.wchpu5muyto5n647@alap3.anarazel.de
This moves the responsibility for:
- creating the storage necessary for a relation, including creating a
new relfilenode for a relation with existing storage
- non-transactional truncation of a relation
- VACUUM FULL / CLUSTER's rewrite of a table
below tableam.
This is fairly straight forward, with a bit of complexity smattered in
to move the computation of xid / multixid horizons below the AM, as
they don't make sense for every table AM.
Author: Andres Freund
Discussion: https://postgr.es/m/20180703070645.wchpu5muyto5n647@alap3.anarazel.de
To support building indexes over tables of different AMs, the scans to
do so need to be routed through the table AM. While moving a fair
amount of code, nearly all the changes are just moving code to below a
callback.
Currently the range based interface wouldn't make much sense for non
block based table AMs. But that seems aceptable for now.
Author: Andres Freund
Discussion: https://postgr.es/m/20180703070645.wchpu5muyto5n647@alap3.anarazel.de
Previously the xid horizon was only computed during WAL replay. That
had two major problems:
1) It relied on knowing what the table pointed to looks like. That was
easy enough before the introducing of tableam (we knew it had to be
heap, although some trickery around logging the heap relfilenodes
was required). But to properly handle table AMs we need
per-database catalog access to look up the AM handler, which
recovery doesn't allow.
2) Not knowing the xid horizon also makes it hard to support logical
decoding on standbys. When on a catalog table, we need to be able
to conflict with slots that have an xid horizon that's too old. But
computing the horizon by visiting the heap only works once
consistency is reached, but we always need to be able to detect
conflicts.
There's also a secondary problem, in that the current method performs
redundant work on every standby. But that's counterbalanced by
potentially computing the value when not necessary (either because
there's no standby, or because there's no connected backends).
Solve 1) and 2) by moving computation of the xid horizon to the
primary and by involving tableam in the computation of the horizon.
To address the potentially increased overhead, increase the efficiency
of the xid horizon computation for heap by sorting the tids, and
eliminating redundant buffer accesses. When prefetching is available,
additionally perform prefetching of buffers. As this is more of a
maintenance task, rather than something routinely done in every read
only query, we add an arbitrary 10 to the effective concurrency -
thereby using IO concurrency, when not globally enabled. That's
possibly not the perfect formula, but seems good enough for now.
Bumps WAL format, as latestRemovedXid is now part of the records, and
the heap's relfilenode isn't anymore.
Author: Andres Freund, Amit Khandekar, Robert Haas
Reviewed-By: Robert Haas
Discussion:
https://postgr.es/m/20181212204154.nsxf3gzqv3gesl32@alap3.anarazel.dehttps://postgr.es/m/20181214014235.dal5ogljs3bmlq44@alap3.anarazel.dehttps://postgr.es/m/20180703070645.wchpu5muyto5n647@alap3.anarazel.de
