PostgreSQL's Windows port has never been able to handle files larger
than 2GB due to the use of off_t for file offsets, only 32-bit on
Windows. This causes signed integer overflow at exactly 2^31 bytes when
trying to handle files larger than 2GB, for the routines touched by this
commit.
Note that large files are forbidden by ./configure (3c6248a828) and
meson (recent change, see 79cd66f28c). This restriction also exists
in v16 and older versions for the now-dead MSVC scripts.
The code base already defines pgoff_t as __int64 (64-bit) on Windows for
this purpose, and some function declarations in headers use it, but many
internals still rely on off_t. This commit switches more routines to
use pgoff_t, offering more portability, for areas mainly related to file
extensions and storage.
These are not critical for WAL segments yet, which have currently a
maximum size allowed of 1GB (well, this opens the door at allowing a
larger size for them). This matters more for segment files if we want
to lift the large file restriction in ./configure and meson in the
future, which would make sense to remove once/if all traces of off_t are
gone from the tree. This can additionally matter for out-of-core code
that may want files larger than 2GB in places where off_t is four bytes
in size.
Note that off_t is still used in other parts of the tree like
buffile.c, WAL sender/receiver, base backup, pg_combinebackup, etc.
These other code paths can be addressed separately, and their update
will be required if we want to remove the large file restriction in the
future. This commit is a good first cut in itself towards more
portability, hopefully.
On Unix-like systems, pgoff_t is defined as off_t, so this change only
affects Windows behavior.
Author: Bryan Green <dbryan.green@gmail.com>
Reviewed-by: Thomas Munro <thomas.munro@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/0f238ff4-c442-42f5-adb8-01b762c94ca1@gmail.com
This new option instructs pg_upgrade to move the data directories
from the old cluster to the new cluster and then to replace the
catalog files with those generated for the new cluster. This mode
can outperform --link, --clone, --copy, and --copy-file-range,
especially on clusters with many relations.
However, this mode creates many garbage files in the old cluster,
which can prolong the file synchronization step if
--sync-method=syncfs is used. To handle that, we recommend using
--sync-method=fsync with this mode, and pg_upgrade internally uses
"initdb --sync-only --no-sync-data-files" for file synchronization.
pg_upgrade will synchronize the catalog files as they are
transferred. We assume that the database files transferred from
the old cluster were synchronized prior to upgrade.
This mode also complicates reverting to the old cluster, so we
recommend restoring from backup upon failure during or after file
transfer. We did consider teaching pg_upgrade how to generate a
revert script for such failures, but we decided against it due to
the rarity of failing during file transfer, the complexity of
generating the script, and the potential for misusing the script.
The new mode is limited to clusters located in the same file
system. With some effort, we could probably support upgrades
between different file systems, but this mode is unlikely to offer
much benefit if we have to copy the files across file system
boundaries.
It is also limited to upgrades from version 10 or newer. There are
a few known obstacles for using swap mode to upgrade from older
versions. For example, the visibility map format changed in v9.6,
and the sequence tuple format changed in v10. In fact, swap mode
omits the --sequence-data option in its uses of pg_dump and instead
reuses the old cluster's sequence data files. While teaching swap
mode to deal with these kinds of changes is surely possible (and we
may have to deal with similar problems in the future, anyway), it
doesn't seem worth the effort to support upgrades from
long-unsupported versions.
Reviewed-by: Greg Sabino Mullane <htamfids@gmail.com>
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Discussion: https://postgr.es/m/Zyvop-LxLXBLrZil%40nathan
This new option instructs initdb to skip synchronizing any files
in database directories, the database directories themselves, and
the tablespace directories, i.e., everything in the base/
subdirectory and any other tablespace directories. Other files,
such as those in pg_wal/ and pg_xact/, will still be synchronized
unless --no-sync is also specified. --no-sync-data-files is
primarily intended for internal use by tools that separately ensure
the skipped files are synchronized to disk. A follow-up commit
will use this to help optimize pg_upgrade's file transfer step.
The --sync-method=fsync implementation of this option makes use of
a new exclude_dir parameter for walkdir(). When not NULL,
exclude_dir specifies a directory to skip processing. The
--sync-method=syncfs implementation of this option just skips
synchronizing the non-default tablespace directories. This means
that initdb will still synchronize some or all of the database
files, but there's not much we can do about that.
Discussion: https://postgr.es/m/Zyvop-LxLXBLrZil%40nathan
compute_remaining_iovec() is a re-usable routine for retrying after
pg_readv() or pg_writev() reports a short transfer. This will gain new
users in a later commit, but can already replace the open-coded
equivalent code in the existing pg_pwritev_with_retry() function.
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Discussion: https://postgr.es/m/CA+hUKGJkOiOCa+mag4BF+zHo7qo=o9CFheB8=g6uT5TUm2gkvA@mail.gmail.com
Since C99, there can be a trailing comma after the last value in an
enum definition. A lot of new code has been introducing this style on
the fly. Some new patches are now taking an inconsistent approach to
this. Some add the last comma on the fly if they add a new last
value, some are trying to preserve the existing style in each place,
some are even dropping the last comma if there was one. We could
nudge this all in a consistent direction if we just add the trailing
commas everywhere once.
I omitted a few places where there was a fixed "last" value that will
always stay last. I also skipped the header files of libpq and ecpg,
in case people want to use those with older compilers. There were
also a small number of cases where the enum type wasn't used anywhere
(but the enum values were), which ended up confusing pgindent a bit,
so I left those alone.
Discussion: https://www.postgresql.org/message-id/flat/386f8c45-c8ac-4681-8add-e3b0852c1620%40eisentraut.org
This commit adds support for using syncfs() in fsync_pgdata() and
fsync_dir_recurse() (which have been renamed to sync_pgdata() and
sync_dir_recurse()). Like recovery_init_sync_method,
sync_pgdata() calls syncfs() for the data directory, each
tablespace, and pg_wal (if it is a symlink). For now, all of the
frontend utilities that use these support functions are hard-coded
to use fsync(), but a follow-up commit will allow specifying
syncfs().
Co-authored-by: Justin Pryzby
Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/20210930004340.GM831%40telsasoft.com
This commit renames RecoveryInitSyncMethod to DataDirSyncMethod and
moves it to common/file_utils.h. This is preparatory work for a
follow-up commit that will allow specifying the synchronization
method in frontend utilities such as pg_upgrade and pg_basebackup.
Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/ZN2ZB4afQ2JbR9TA%40paquier.xyz
Presently, frontend code that needs to use these macros must either
include storage/fd.h, which declares several frontend-unsafe
functions, or duplicate the macros. This commit moves these macros
to common/file_utils.h, which is safe for both frontend and backend
code. Consequently, we can also remove the duplicated macros in
pg_checksums and stop including storage/fd.h in pg_rewind.
Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/ZOP5qoUualu5xl2Z%40paquier.xyz
The following changes are made to pg_write_zeros(), the API able to
write series of zeros using vectored I/O:
- Add of an "offset" parameter, to write the size from this position
(the 'p' of "pwrite" seems to mean position, though POSIX does not
outline ythat directly), hence the name of the routine is incorrect if
it is not able to handle offsets.
- Avoid memset() of "zbuffer" on every call.
- Avoid initialization of the whole IOV array if not needed.
- Group the trailing write() call with the main write() call,
simplifying the function logic.
Author: Andres Freund
Reviewed-by: Michael Paquier, Bharath Rupireddy
Discussion: https://postgr.es/m/20230215005525.mrrlmqrxzjzhaipl@awork3.anarazel.de
This routine is designed to write zeros to a file using vectored I/O,
for a size given by its caller, being useful when it comes to
initializing a file with a final size already known.
XLogFileInitInternal() in xlog.c is changed to use this new routine when
initializing WAL segments with zeros (wal_init_zero enabled). Note that
the aligned buffers used for the vectored I/O writes have a size of
XLOG_BLCKSZ, and not BLCKSZ anymore, as pg_pwrite_zeros() relies on
PGAlignedBlock while xlog.c originally used PGAlignedXLogBlock.
This routine will be used in a follow-up patch to do the pre-padding of
WAL segments for pg_receivewal and pg_basebackup when these are not
compressed.
Author: Bharath Rupireddy
Reviewed-by: Nathan Bossart, Andres Freund, Thomas Munro, Michael
Paquier
Discussion: https://www.postgresql.org/message-id/CALj2ACUq7nAb7%3DbJNbK3yYmp-SZhJcXFR_pLk8un6XgDzDF3OA%40mail.gmail.com
This commit moves pg_pwritev_with_retry(), a convenience wrapper of
pg_writev() able to handle partial writes, to common/file_utils.c so
that the frontend code is able to use it. A first use-case targetted
for this routine is pg_basebackup and pg_receivewal, for the
zero-padding of a newly-initialized WAL segment. This is used currently
in the backend when the GUC wal_init_zero is enabled (default).
Author: Bharath Rupireddy
Reviewed-by: Nathan Bossart, Thomas Munro
Discussion: https://postgr.es/m/CALj2ACUq7nAb7=bJNbK3yYmp-SZhJcXFR_pLk8un6XgDzDF3OA@mail.gmail.com
This is still using the 2.0 version of pg_bsd_indent.
I thought it would be good to commit this separately,
so as to document the differences between 2.0 and 2.1 behavior.
Discussion: https://postgr.es/m/16296.1558103386@sss.pgh.pa.us
This unifies the various ad hoc logging (message printing, error
printing) systems used throughout the command-line programs.
Features:
- Program name is automatically prefixed.
- Message string does not end with newline. This removes a common
source of inconsistencies and omissions.
- Additionally, a final newline is automatically stripped, simplifying
use of PQerrorMessage() etc., another common source of mistakes.
- I converted error message strings to use %m where possible.
- As a result of the above several points, more translatable message
strings can be shared between different components and between
frontends and backend, without gratuitous punctuation or whitespace
differences.
- There is support for setting a "log level". This is not meant to be
user-facing, but can be used internally to implement debug or
verbose modes.
- Lazy argument evaluation, so no significant overhead if logging at
some level is disabled.
- Some color in the messages, similar to gcc and clang. Set
PG_COLOR=auto to try it out. Some colors are predefined, but can be
customized by setting PG_COLORS.
- Common files (common/, fe_utils/, etc.) can handle logging much more
simply by just using one API without worrying too much about the
context of the calling program, requiring callbacks, or having to
pass "progname" around everywhere.
- Some programs called setvbuf() to make sure that stderr is
unbuffered, even on Windows. But not all programs did that. This
is now done centrally.
Soft goals:
- Reduces vertical space use and visual complexity of error reporting
in the source code.
- Encourages more deliberate classification of messages. For example,
in some cases it wasn't clear without analyzing the surrounding code
whether a message was meant as an error or just an info.
- Concepts and terms are vaguely aligned with popular logging
frameworks such as log4j and Python logging.
This is all just about printing stuff out. Nothing affects program
flow (e.g., fatal exits). The uses are just too varied to do that.
Some existing code had wrappers that do some kind of print-and-exit,
and I adapted those.
I tried to keep the output mostly the same, but there is a lot of
historical baggage to unwind and special cases to consider, and I
might not always have succeeded. One significant change is that
pg_rewind used to write all error messages to stdout. That is now
changed to stderr.
Reviewed-by: Donald Dong <xdong@csumb.edu>
Reviewed-by: Arthur Zakirov <a.zakirov@postgrespro.ru>
Discussion: https://www.postgresql.org/message-id/flat/6a609b43-4f57-7348-6480-bd022f924310@2ndquadrant.com
Change pg_bsd_indent to follow upstream rules for placement of comments
to the right of code, and remove pgindent hack that caused comments
following #endif to not obey the general rule.
Commit e3860ffa4d wasn't actually using
the published version of pg_bsd_indent, but a hacked-up version that
tried to minimize the amount of movement of comments to the right of
code. The situation of interest is where such a comment has to be
moved to the right of its default placement at column 33 because there's
code there. BSD indent has always moved right in units of tab stops
in such cases --- but in the previous incarnation, indent was working
in 8-space tab stops, while now it knows we use 4-space tabs. So the
net result is that in about half the cases, such comments are placed
one tab stop left of before. This is better all around: it leaves
more room on the line for comment text, and it means that in such
cases the comment uniformly starts at the next 4-space tab stop after
the code, rather than sometimes one and sometimes two tabs after.
Also, ensure that comments following #endif are indented the same
as comments following other preprocessor commands such as #else.
That inconsistency turns out to have been self-inflicted damage
from a poorly-thought-through post-indent "fixup" in pgindent.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
"xlog" is not a particularly clear abbreviation for "write-ahead log",
and it sometimes confuses users into believe that the contents of the
"pg_xlog" directory are not critical data, leading to unpleasant
consequences. So, rename the directory to "pg_wal".
This patch modifies pg_upgrade and pg_basebackup to understand both
the old and new directory layouts; the former is necessary given the
purpose of the tool, while the latter merely avoids an unnecessary
backward-compatibility break.
We may wish to consider renaming other programs, switches, and
functions which still use the old "xlog" naming to also refer to
"wal". However, that's still under discussion, so let's do just this
much for now.
Discussion: CAB7nPqTeC-8+zux8_-4ZD46V7YPwooeFxgndfsq5Rg8ibLVm1A@mail.gmail.com
Michael Paquier
Several places weren't careful about fsyncing in the way. See 1d4a0ab1
and 606e0f98 for details about required fsyncs.
This adds a couple of functions in src/common/ that have an equivalent
in the backend: durable_rename(), fsync_parent_path()
From: Michael Paquier <michael.paquier@gmail.com>
