This can't really work because standby_mode expects there to be more
WAL arriving, which there will not ever be because there's no WAL
receiver process to fetch it. Moreover, if standby_mode is on then
hot standby might also be turned on, causing even more strangeness
because that expects read-only sessions to be executing in parallel.
Bernd Helmle reported a case where btree_xlog_delete_get_latestRemovedXid
got confused, but rather than band-aiding individual problems it seems
best to prevent getting anywhere near this state in the first place.
Back-patch to all supported branches.
In passing, also fix some omissions of errcodes in other ereport's in
readRecoveryCommandFile().
Michael Paquier (errcode hacking by me)
Discussion: <00F0B2CEF6D0CEF8A90119D4@eje.credativ.lan>
Since the hash AM is going to be revamped to have WAL, this is a good
opportunity to clean up the include file a little bit to avoid including
a lot of extra stuff in the future.
Author: Amit Kapila
Previously pg_xlogdump failed to dump the contents of the WAL file
if the file starts with the continuation WAL record which spans
more than one pages. Since pg_xlogdump assumed that the continuation
record always fits on a page, it could not find the valid WAL record to
start reading from in that case.
This patch changes pg_xlogdump so that it can handle a continuation
WAL record which crosses a page boundary and find the valid record
to start reading from.
Back-patch to 9.3 where pg_xlogdump was introduced.
Author: Pavan Deolasee
Reviewed-By: Michael Paquier and Craig Ringer
Discussion: CABOikdPsPByMiG6J01DKq6om2+BNkxHTPkOyqHM2a4oYwGKsqQ@mail.gmail.com
I found that half a dozen (nearly 5%) of our AllocSetContextCreate calls
had typos in the context-sizing parameters. While none of these led to
especially significant problems, they did create minor inefficiencies,
and it's now clear that expecting people to copy-and-paste those calls
accurately is not a great idea. Let's reduce the risk of future errors
by introducing single macros that encapsulate the common use-cases.
Three such macros are enough to cover all but two special-purpose contexts;
those two calls can be left as-is, I think.
While this patch doesn't in itself improve matters for third-party
extensions, it doesn't break anything for them either, and they can
gradually adopt the simplified notation over time.
In passing, change TopMemoryContext to use the default allocation
parameters. Formerly it could only be extended 8K at a time. That was
probably reasonable when this code was written; but nowadays we create
many more contexts than we did then, so that it's not unusual to have a
couple hundred K in TopMemoryContext, even without considering various
dubious code that sticks other things there. There seems no good reason
not to let it use growing blocks like most other contexts.
Back-patch to 9.6, mostly because that's still close enough to HEAD that
it's easy to do so, and keeping the branches in sync can be expected to
avoid some future back-patching pain. The bugs fixed by these changes
don't seem to be significant enough to justify fixing them further back.
Discussion: <21072.1472321324@sss.pgh.pa.us>
HandleParallelMessages leaked memory into the caller's context. Since it's
called from ProcessInterrupts, there is basically zero certainty as to what
CurrentMemoryContext is, which means we could be leaking into long-lived
contexts. Over the processing of many worker messages that would grow to
be a problem. Things could be even worse than just a leak, if we happened
to service the interrupt while ErrorContext is current: elog.c thinks it
can reset that on its own whim, possibly yanking storage out from under
HandleParallelMessages.
Give HandleParallelMessages its own dedicated context instead, which we can
reset during each call to ensure there's no accumulation of wasted memory.
Discussion: <16610.1472222135@sss.pgh.pa.us>
The previous coding here was capable of adding a "parallel worker" context
line to errors that were not, in fact, returned from a parallel worker.
Instead of using an errcontext callback to add that annotation, just paste
it onto the message by hand; this looks uglier but is more reliable.
Discussion: <19757.1472151987@sss.pgh.pa.us>
As noted by Alvaro, there are CHECK_FOR_INTERRUPTS() calls in the shm_mq.c
functions called by HandleParallelMessages(). I believe they're all
unreachable since we always pass nowait = true, but it doesn't seem like
a great idea to assume that no such call will ever be reachable from
HandleParallelMessages(). If that did happen, there would be a risk of a
recursive call to HandleParallelMessages(), which it does not appear to be
designed for --- for example, there's nothing that would prevent
out-of-order processing of received messages. And certainly such cases
cannot easily be tested. So let's prevent it by holding off interrupts for
the duration of the function. Back-patch to 9.5 which contains identical
code.
Discussion: <14869.1470083848@sss.pgh.pa.us>
ParallelMessagePending *must* be marked volatile, because it's set
by a signal handler. On the other hand, it's pointless for
HandleParallelMessageInterrupt to save/restore errno; that must be,
and is, done at the outer level of the SIGUSR1 signal handler.
Calling CHECK_FOR_INTERRUPTS() inside HandleParallelMessages, which itself
is called from CHECK_FOR_INTERRUPTS(), seems both useless and hazardous.
The comment claiming that this is needed to handle the error queue going
away is certainly misguided, in any case.
Improve a couple of error message texts, and use
ERRCODE_OBJECT_NOT_IN_PREREQUISITE_STATE to report loss of parallel worker
connection, since that's what's used in e.g. tqueue.c. (Maybe it would be
worth inventing a dedicated ERRCODE for this type of failure? But I do not
think ERRCODE_INTERNAL_ERROR is appropriate.)
Minor stylistic cleanups.
On a standby, ThisTimelineID is always 0, so we would generate a
filename in timeline 0 even for other timelines. Instead, use starttli
which we have retreived from the controlfile.
Report by: Francesco Canovai in bug #14230
Author: Marco Nenciarini
Reviewed by: Michael Paquier and Amit Kapila
Previously, workers sent data to the leader using the client encoding.
That mostly worked, but the leader the converted the data back to the
server encoding. Since not all encoding conversions are reversible,
that could provoke failures. Fix by using the database encoding for
all communication between worker and leader.
Also, while temporary changes to GUC settings, as from the SET clause
of a function, are in general OK for parallel query, changing
client_encoding this way inside of a parallel worker is not OK.
Previously, that would have confused the leader; with these changes,
it would not confuse the leader, but it wouldn't do anything either.
So refuse such changes in parallel workers.
Also, the previous code naively assumed that when it received a
NotifyResonse from the worker, it could pass that directly back to the
user. But now that worker-to-leader communication always uses the
database encoding, that's clearly no longer correct - though,
actually, the old way was always broken for V2 clients. So
disassemble and reconstitute the message instead.
Issues reported by Peter Eisentraut. Patch by me, reviewed by
Peter Eisentraut.
After pg_upgrade, it is possible that some tuples' Xmax have multixacts
corresponding to the old installation; such multixacts cannot have
running members anymore. In many code sites we already know not to read
them and clobber them silently, but at least when VACUUM tries to freeze
a multixact or determine whether one needs freezing, there's an attempt
to resolve it to its member transactions by calling GetMultiXactIdMembers,
and if the multixact value is "in the future" with regards to the
current valid multixact range, an error like this is raised:
ERROR: MultiXactId 123 has not been created yet -- apparent wraparound
and vacuuming fails. Per discussion with Andrew Gierth, it is completely
bogus to try to resolve multixacts coming from before a pg_upgrade,
regardless of where they stand with regards to the current valid
multixact range.
It's possible to get from under this problem by doing SELECT FOR UPDATE
of the problem tuples, but if tables are large, this is slow and
tedious, so a more thorough solution is desirable.
To fix, we realize that multixacts in xmax created in 9.2 and previous
have a specific bit pattern that is never used in 9.3 and later (we
already knew this, per comments and infomask tests sprinkled in various
places, but we weren't leveraging this knowledge appropriately).
Whenever the infomask of the tuple matches that bit pattern, we just
ignore the multixact completely as if Xmax wasn't set; or, in the case
of tuple freezing, we act as if an unwanted value is set and clobber it
without decoding. This guarantees that no errors will be raised, and
that the values will be progressively removed until all tables are
clean. Most callers of GetMultiXactIdMembers are patched to recognize
directly that the value is a removable "empty" multixact and avoid
calling GetMultiXactIdMembers altogether.
To avoid changing the signature of GetMultiXactIdMembers() in back
branches, we keep the "allow_old" boolean flag but rename it to
"from_pgupgrade"; if the flag is true, we always return an empty set
instead of looking up the multixact. (I suppose we could remove the
argument in the master branch, but I chose not to do so in this commit).
This was broken all along, but the error-facing message appeared first
because of commit 8e9a16ab8f and was partially fixed in a25c2b7c4d.
This fix, backpatched all the way back to 9.3, goes approximately in the
same direction as a25c2b7c4d but should cover all cases.
Bug analysis by Andrew Gierth and Álvaro Herrera.
A number of public reports match this bug:
https://www.postgresql.org/message-id/20140330040029.GY4582@tamriel.snowman.nethttps://www.postgresql.org/message-id/538F3D70.6080902@publicrelay.comhttps://www.postgresql.org/message-id/556439CF.7070109@pscs.co.ukhttps://www.postgresql.org/message-id/SG2PR06MB0760098A111C88E31BD4D96FB3540@SG2PR06MB0760.apcprd06.prod.outlook.comhttps://www.postgresql.org/message-id/20160615203829.5798.4594@wrigleys.postgresql.org
The fact that no workers were successfully launched in the previous
iteration does not excuse us from setting up properly to try again.
This appears to explain crashes I saw in parallel regression testing
due to error_mqh being NULL when it shouldn't be.
Minor other cosmetic fixes too.
Transmit the leader's temp-namespace state to workers. This is important
because without it, the workers do not really have the same search path
as the leader. For example, there is no good reason (and no extant code
either) to prevent a worker from executing a temp function that the
leader created previously; but as things stood it would fail to find the
temp function, and then either fail or execute the wrong function entirely.
We still prohibit a worker from creating a temp namespace on its own.
In effect, a worker can only see the session's temp namespace if the leader
had created it before starting the worker, which seems like the right
semantics.
Also, transmit the leader's BackendId to workers, and arrange for workers
to use that when determining the physical file path of a temp relation
belonging to their session. While the original intent was to prevent such
accesses entirely, there were a number of holes in that, notably in places
like dbsize.c which assume they can safely access temp rels of other
sessions anyway. We might as well get this right, as a small down payment
on someday allowing workers to access the leader's temp tables. (With
this change, directly using "MyBackendId" as a relation or buffer backend
ID is deprecated; you should use BackendIdForTempRelations() instead.
I left a couple of such uses alone though, as they're not going to be
reachable in parallel workers until we do something about localbuf.c.)
Move the thou-shalt-not-access-thy-leader's-temp-tables prohibition down
into localbuf.c, which is where it actually matters, instead of having it
in relation_open(). This amounts to recognizing that access to temp
tables' catalog entries is perfectly safe in a worker, it's only the data
in local buffers that is problematic.
Having done all that, we can get rid of the test in has_parallel_hazard()
that says that use of a temp table's rowtype is unsafe in parallel workers.
That test was unduly expensive, and if we really did need such a
prohibition, that was not even close to being a bulletproof guard for it.
(For example, any user-defined function executed in a parallel worker
might have attempted such access.)
Mostly these are just comments but there are a few in documentation
and a handful in code and tests. Hopefully this doesn't cause too much
unnecessary pain for backpatching. I relented from some of the most
common like "thru" for that reason. The rest don't seem numerous
enough to cause problems.
Thanks to Kevin Lyda's tool https://pypi.python.org/pypi/misspellings
Page image should be MAXALIGN'ed because existing code could directly align
pointers in page instead of align offset from beginning of page.
Found during play with indexes as extenstion, Alexander Korotkov and me
Some comments mentioned XLogReplayBuffer, but there's no such function:
that was an interim name for a function that got renamed to
XLogReadBufferForRedo, before commit 2c03216d83 was pushed.
That way, if the result overflows size_t, you'll get an error instead
of undefined behavior, which seems like a plus. This also has the
effect of casting the number of workers from int to Size, which is
better because it's harder to overflow int than size_t.
Dilip Kumar reported this issue and provided a patch upon which this
patch is based, but his version did use mul_size.
This reverts commits f07d18b6e9, 82c83b3372, 3a3b309041, and
24c5f1a103.
This feature has shown enough immaturity that it was deemed better to
rip it out before rushing some more fixes at the last minute. There are
discussions on larger changes in this area for the next release.
So far, when a transaction with pending invalidations, but without an
assigned xid, committed, we simply ignored those invalidation
messages. That's problematic, because those are actually sent for a
reason.
Known symptoms of this include that existing sessions on a hot-standby
replica sometimes fail to notice new concurrently built indexes and
visibility map updates.
The solution is to WAL log such invalidations in transactions without an
xid. We considered to alternatively force-assign an xid, but that'd be
problematic for vacuum, which might be run in systems with few xids.
Important: This adds a new WAL record, but as the patch has to be
back-patched, we can't bump the WAL page magic. This means that standbys
have to be updated before primaries; otherwise
"PANIC: standby_redo: unknown op code 32" errors can be encountered.
XXX:
Reported-By: Васильев Дмитрий, Masahiko Sawada
Discussion:
CAB-SwXY6oH=9twBkXJtgR4UC1NqT-vpYAtxCseME62ADwyK5OA@mail.gmail.comCAD21AoDpZ6Xjg=gFrGPnSn4oTRRcwK1EBrWCq9OqOHuAcMMC=w@mail.gmail.com
The reverted changes were intended to force a choice of whether any
newly-added BufferGetPage() calls needed to be accompanied by a
test of the snapshot age, to support the "snapshot too old"
feature. Such an accompanying test is needed in about 7% of the
cases, where the page is being used as part of a scan rather than
positioning for other purposes (such as DML or vacuuming). The
additional effort required for back-patching, and the doubt whether
the intended benefit would really be there, have indicated it is
best just to rely on developers to do the right thing based on
comments and existing usage, as we do with many other conventions.
This change should have little or no effect on generated executable
code.
Motivated by the back-patching pain of Tom Lane and Robert Haas
Rename this function to GenericXLogRegisterBuffer() to make it clearer
what it does, and leave room for other sorts of "register" actions in
future. Also, replace its "bool isNew" argument with an integer flags
argument, so as to allow adding more flags in future without an API
break.
Alexander Korotkov, adjusted slightly by me
The previous coding could allow the contents of the "hole" between pd_lower
and pd_upper to diverge during replay from what it had been when the update
was originally applied. This would pose a problem if checksums were in
use, and in any case would complicate forensic comparisons between master
and slave servers. So force the "hole" to contain zeroes, both at initial
application of a generically-logged action, and at replay.
Alexander Korotkov, adjusted slightly by me
Since we're requiring pages handled by generic_xlog.c to be standard
format, specify REGBUF_STANDARD when doing a full-page image, so that
xloginsert.c can compress out the "hole" between pd_lower and pd_upper.
Given the current API in which this path will be taken only for a newly
initialized page, the hole is likely to be particularly large in such
cases, so that this oversight could easily be performance-significant.
I don't notice any particular change in the runtime of contrib/bloom's
regression test, though.
Make the inner comparison loops of computeDelta() as tight as possible by
pulling considerations of valid and invalid ranges out of the inner loops,
and extending a match or non-match detection as far as possible before
deciding what to do next. To keep this tractable, give up the possibility
of merging fragments across the pd_lower to pd_upper gap. The fraction of
pages where that could happen (ie, there are 4 or fewer bytes in the gap,
*and* data changes immediately adjacent to it on both sides) is too small
to be worth spending cycles on.
Also, avoid two BLCKSZ-length memcpy()s by computing the delta before
moving data into the target buffer, instead of after. This doesn't save
nearly as many cycles as being tenser about computeDelta(), but it still
seems worth doing.
On my machine, this patch cuts a full 40% off the runtime of
contrib/bloom's regression test.
This routine is unsafe as implemented, because it invalidates the page
image pointers returned by previous GenericXLogRegister() calls.
Rather than complicate the API or the implementation to avoid that,
let's just get rid of it; the use-case for having it seems much
too thin to justify a lot of work here.
While at it, do some wordsmithing on the SGML docs for generic WAL.
Improve commentary, use more specific names for the delta fields,
const-ify pointer arguments where possible, avoid assuming that
initializing only the first element of a local array will guarantee
that the remaining elements end up as we need them. (I think that
code in generic_redo actually worked, but only because InvalidBuffer
is zero; this is a particularly ugly way of depending on that ...)
This patch is a no-op patch which is intended to reduce the chances
of failures of omission once the functional part of the "snapshot
too old" patch goes in. It adds parameters for snapshot, relation,
and an enum to specify whether the snapshot age check needs to be
done for the page at this point. This initial patch passes NULL
for the first two new parameters and BGP_NO_SNAPSHOT_TEST for the
third. The follow-on patch will change the places where the test
needs to be made.
Benchmarking has shown that the current number of clog buffers limits
scalability. We've previously increased the number in 33aaa139, but
that's not sufficient with a large number of clients.
We've benchmarked the cost of increasing the limit by benchmarking worst
case scenarios; testing showed that 128 buffers don't cause a
regression, even in contrived scenarios, whereas 256 does
There are a number of more complex patches flying around to address
various clog scalability problems, but this is simple enough that we can
get it into 9.6; and is beneficial even after those patches have been
applied.
It is a bit unsatisfactory to increase this in small steps every few
releases, but a better solution seems to require a rewrite of slru.c;
not something done quickly.
Author: Amit Kapila and Andres Freund
Discussion: CAA4eK1+-=18HOrdqtLXqOMwZDbC_15WTyHiFruz7BvVArZPaAw@mail.gmail.com
Now that pg_dump will properly dump out any ACL changes made to
functions which exist in pg_catalog, switch to using the GRANT system
to manage access to those functions.
This means removing 'if (!superuser()) ereport()' checks from the
functions themselves and then REVOKEing EXECUTE right from 'public' for
these functions in system_views.sql.
Reviews by Alexander Korotkov, Jose Luis Tallon
API and mechanism to allow generic messages to be inserted into WAL that are
intended to be read by logical decoding plugins. This commit adds an optional
new callback to the logical decoding API.
Messages are either text or bytea. Messages can be transactional, or not, and
are identified by a prefix to allow multiple concurrent decoding plugins.
(Not to be confused with Generic WAL records, which are intended to allow crash
recovery of extensible objects.)
Author: Petr Jelinek and Andres Freund
Reviewers: Artur Zakirov, Tomas Vondra, Simon Riggs
Discussion: 5685F999.6010202@2ndquadrant.com
Previously non-exclusive backups had to be done using the replication protocol
and pg_basebackup. With this commit it's now possible to make them using
pg_start_backup/pg_stop_backup as well, as long as the backup program can
maintain a persistent connection to the database.
Doing this, backup_label and tablespace_map are returned as results from
pg_stop_backup() instead of being written to the data directory. This makes
the server safe from a crash during an ongoing backup, which can be a problem
with exclusive backups.
The old syntax of the functions remain and work exactly as before, but since the
new syntax is safer this should eventually be deprecated and removed.
Only reference documentation is included. The main section on backup still needs
to be rewritten to cover this, but since that is already scheduled for a separate
large rewrite, it's not included in this patch.
Reviewed by David Steele and Amit Kapila
This interface is designed to give an access to WAL for extensions which
could implement new access method, for example. Previously it was
impossible because restoring from custom WAL would need to access system
catalog to find a redo custom function. This patch suggests generic way
to describe changes on page with standart layout.
Bump XLOG_PAGE_MAGIC because of new record type.
Author: Alexander Korotkov with a help of Petr Jelinek, Markus Nullmeier and
minor editorization by my
Reviewers: Petr Jelinek, Alvaro Herrera, Teodor Sigaev, Jim Nasby,
Michael Paquier
When decoding from a logical slot, it's necessary for xlog reading to be
able to read xlog from historical (i.e. not current) timelines;
otherwise, decoding fails after failover, because the archives are in
the historical timeline. This is required to make "failover logical
slots" possible; it currently has no other use, although theoretically
it could be used by an extension that creates a slot on a standby and
continues to replay from the slot when the standby is promoted.
This commit includes a module in src/test/modules with functions to
manipulate the slots (which is not otherwise possible in SQL code) in
order to enable testing, and a new test in src/test/recovery to ensure
that the behavior is as expected.
Author: Craig Ringer
Reviewed-By: Oleksii Kliukin, Andres Freund, Petr Jelínek
Some minor tweaks and comment additions, for cleanliness sake and to
avoid having the upcoming timeline-following patch be polluted with
unrelated cleanup.
Extracted from a larger patch by Craig Ringer, reviewed by Andres
Freund, with some additions by myself.
In this mode, the master waits for the transaction to be applied on
the remote side, not just written to disk. That means that you can
count on a transaction started on the standby to see all commits
previously acknowledged by the master.
To make this work, the standby sends a reply after replaying each
commit record generated with synchronous_commit >= 'remote_apply'.
This introduces a small inefficiency: the extra replies will be sent
even by standbys that aren't the current synchronous standby. But
previously-existing synchronous_commit levels make no attempt at all
to optimize which replies are sent based on what the primary cares
about, so this is no worse, and at least avoids any extra replies for
people not using the feature at all.
Thomas Munro, reviewed by Michael Paquier and by me. Some additional
tweaks by me.
The distinction between "archive" and "hot_standby" existed only because
at the time "hot_standby" was added, there was some uncertainty about
stability. This is now a long time ago. We would like to move forward
with simplifying the replication configuration, but this distinction is
in the way, because a primary server cannot tell (without asking a
standby or predicting the future) which one of these would be the
appropriate level.
Pick a new name for the combined setting to make it clearer that it
covers all (non-logical) backup and replication uses. The old values
are still accepted but are converted internally.
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
Reviewed-by: David Steele <david@pgmasters.net>
