Previously, GetJsonPathVar() allowed a jsonpath expression to
reference any prefix of a PASSING variable's name. For example, the
following query would incorrectly work:
SELECT JSON_QUERY(context_item, jsonpath '$xy' PASSING val AS xyz);
The fix ensures that the length of the variable name mentioned in a
jsonpath expression matches exactly with the name of the PASSING
variable before comparing the strings using strncmp().
Reported-by: Alvaro Herrera (off-list)
Discussion: https://postgr.es/m/CA+HiwqFGkLWMvELBH6E4SQ45qUHthgcRH6gCJL20OsYDRtFx_w@mail.gmail.com
Commit 534287403 invented SHARED_DEPENDENCY_INITACL entries in
pg_shdepend, but installed them only for non-owner roles mentioned
in a pg_init_privs entry. This turns out to be the wrong thing,
because there is nothing to cue REASSIGN OWNED to go and update
pg_init_privs entries when the object's ownership is reassigned.
That leads to leaving dangling entries in pg_init_privs, as
reported by Hannu Krosing. Instead, install INITACL entries for
all roles mentioned in pg_init_privs entries (except pinned roles),
and change ALTER OWNER to not touch them, just as it doesn't
touch pg_init_privs entries.
REASSIGN OWNED will now substitute the new owner OID for the old
in pg_init_privs entries. This feels like perhaps not quite the
right thing, since pg_init_privs ought to be a historical record
of the state of affairs just after CREATE EXTENSION. However,
it's hard to see what else to do, if we don't want to disallow
dropping the object's original owner. In any case this is
better than the previous do-nothing behavior, and we're unlikely
to come up with a superior solution in time for v17.
While here, tighten up some coding rules about how ACLs in
pg_init_privs should never be null or empty. There's not any
obvious reason to allow that, and perhaps asserting that it's
not so will catch some bugs. (We were previously inconsistent
on the point, with some code paths taking care not to store
empty ACLs and others not.)
This leaves recordExtensionInitPrivWorker not doing anything
with its ownerId argument, but we'll deal with that separately.
catversion bump forced because of change of expected contents
of pg_shdepend when pg_init_privs entries exist.
Discussion: https://postgr.es/m/CAMT0RQSVgv48G5GArUvOVhottWqZLrvC5wBzBa4HrUdXe9VRXw@mail.gmail.com
The manual says clearly that punctuation in the input of
websearch_to_tsquery() is ignored, except for the special cases
of dashes and quotes. However, this failed for cases like
"(foo bar) or something", or in general an ISOPERATOR character
in front of the "or". We'd switch back to WAITOPERAND state,
then ignore the operator character while remaining in that state,
and then reach the "or" in WAITOPERAND state which (intentionally)
makes us treat it as data.
The fix is simple enough: if we see an ISOPERATOR character while in
WAITOPERATOR state, we have to skip it while staying in that state.
(We don't need to worry about other punctuation characters: those will
be consumed as though they were words, but then rejected by lexizing.)
In v14 and up (since commit eb086056f) we can simplify the code a bit
more too, because there is no longer a reason for the WAITOPERAND
state to distinguish between quoted and unquoted operands.
Per bug #18479 from Manos Emmanouilidis. Back-patch to all supported
branches.
Discussion: https://postgr.es/m/18479-d9b46e2fc242c33e@postgresql.org
Make sure that function declarations use names that exactly match the
corresponding names from function definitions in a few places. These
inconsistencies were all introduced during Postgres 17 development.
pg_bsd_indent still has a couple of similar inconsistencies, which I
(pgeoghegan) have left untouched for now.
This commit was written with help from clang-tidy, by mechanically
applying the same rules as similar clean-up commits (the earliest such
commit was commit 035ce1fe).
Commit 3e1a373e2 missed teaching DecodeTimeOnly the same "ptype"
manipulations it added to DecodeDateTime. While likely harmless
at the time, it became a problem after 5b3c59535 added an error check
that ptype must be zero once we exit the parsing loop (that is, there
shouldn't be any unused prefixes). The consequence was that we'd
reject time or timetz input like T12:34:56 (the "extended" format
per ISO 8601-1:2019), even though that still worked in timestamp
input.
Since this is clearly under-tested code, add test cases covering all
the ISO 8601 time formats. (Note: although 8601 allows just "Thh",
we have never accepted that, and this patch doesn't change that.
I'm content to leave that as-is because it seems too likely to be
a mistake rather than intended input. If anyone wants to allow
that, it should be a separate patch anyway, and not back-patched.)
Per bug #18470 from David Perez. Back-patch to v16 where we
broke it.
Discussion: https://postgr.es/m/18470-34fad4c829106848@postgresql.org
After further review, we want to move in the direction of always
quoting GUC names in error messages, rather than the previous (PG16)
wildly mixed practice or the intermittent (mid-PG17) idea of doing
this depending on how possibly confusing the GUC name is.
This commit applies appropriate quotes to (almost?) all mentions of
GUC names in error messages. It partially supersedes a243569bf6 and
8d9978a717, which had moved things a bit in the opposite direction
but which then were abandoned in a partial state.
Author: Peter Smith <smithpb2250@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/CAHut%2BPv-kSN8SkxSdoHano_wPubqcg5789ejhCDZAcLFceBR-w%40mail.gmail.com
This feature set did not handle empty ranges correctly, and it's now
too late for PostgreSQL 17 to fix it.
The following commits are reverted:
6db4598fcb Add stratnum GiST support function
46a0cd4cef Add temporal PRIMARY KEY and UNIQUE constraints
86232a49a4 Fix comment on gist_stratnum_btree
030e10ff1a Rename pg_constraint.conwithoutoverlaps to conperiod
a88c800deb Use daterange and YMD in without_overlaps tests instead of tsrange.
5577a71fb0 Use half-open interval notation in without_overlaps tests
34768ee361 Add temporal FOREIGN KEY contraints
482e108cd3 Add test for REPLICA IDENTITY with a temporal key
c3db1f30cb doc: clarify PERIOD and WITHOUT OVERLAPS in CREATE TABLE
144c2ce0cc Fix ON CONFLICT DO NOTHING/UPDATE for temporal indexes
Discussion: https://www.postgresql.org/message-id/d0b64a7a-dfe4-4b84-a906-c7dedfa40a3e@eisentraut.org
There are some problems with the new way to handle these constraints
that were detected at the last minute, and require fixes that appear too
invasive to be doing this late in the cycle. Revert this (again) for
now, we'll try again with these problems fixed.
The following commits are reverted:
b0e96f3119 Catalog not-null constraints
9b581c5341 Disallow changing NO INHERIT status of a not-null constraint
d0ec2ddbe0 Fix not-null constraint test
ac22a9545c Move privilege check to the right place
b0f7dd915b Check stack depth in new recursive functions
3af7217942 Update information_schema definition for not-null constraints
c3709100be Fix propagating attnotnull in multiple inheritance
d9f686a72e Fix restore of not-null constraints with inheritance
d72d32f52d Don't try to assign smart names to constraints
0cd711271d Better handle indirect constraint drops
13daa33fa5 Disallow NO INHERIT not-null constraints on partitioned tables
d45597f72f Disallow direct change of NO INHERIT of not-null constraints
21ac38f498 Fix inconsistencies in error messages
Discussion: https://postgr.es/m/202405110940.joxlqcx4dogd@alvherre.pgsql
In commit 25cd2d640 I (tgl) opined that "The additions of the months
and microseconds fields could also overflow, of course. However,
I believe we need no additional checks there; the existing range
checks should catch such cases". This is demonstrably wrong however
for the microseconds field, and given that discovery it seems prudent
to be paranoid about the months addition as well.
Report and patch by Joseph Koshakow. As before, back-patch to all
supported branches. (However, the test case doesn't work before
v15 because we didn't allow wider-than-int32 numbers in interval
literals. A variant test could probably be built that fits within
that restriction, but it didn't seem worth the trouble.)
Discussion: https://postgr.es/m/CAAvxfHf77sRHKoEzUw9_cMYSpbpNS2C+J_+8Dq4+0oi8iKopeA@mail.gmail.com
This addresses some post-commit review comments for commits 6185c973,
de3600452, and 9425c596a0, with the following changes:
* Fix JSON_TABLE() syntax documentation to use the term
"path_expression" for JSON path expressions instead of
"json_path_specification" to be consistent with the other SQL/JSON
functions.
* Fix a typo in the example code in JSON_TABLE() documentation.
* Rewrite some newly added comments in jsonpath.h.
* In JsonPathQuery(), add missing cast to int before printing an enum
value.
Reported-by: Jian He <jian.universality@gmail.com>
Discussion: https://postgr.es/m/CACJufxG_e0QLCgaELrr2ZNz7AxPeGCNKAORe3fHtFCQLsH4J4Q@mail.gmail.com
This improves some error messages emitted by SQL/JSON query functions
by mentioning column name when available, such as when they are
invoked as part of evaluating JSON_TABLE() columns. To do so, a new
field column_name is added to both JsonFuncExpr and JsonExpr that is
only populated when creating those nodes for transformed JSON_TABLE()
columns.
While at it, relevant error messages are reworded for clarity.
Reported-by: Jian He <jian.universality@gmail.com>
Suggested-by: Jian He <jian.universality@gmail.com>
Discussion: https://postgr.es/m/CACJufxG_e0QLCgaELrr2ZNz7AxPeGCNKAORe3fHtFCQLsH4J4Q@mail.gmail.com
This addresses a few problems with commit e5da0fe3c2 ("Catalog domain
not-null constraints").
In CREATE DOMAIN, a NOT NULL constraint looks like
CREATE DOMAIN d1 AS int [ CONSTRAINT conname ] NOT NULL
(Before e5da0fe3c2, the constraint name was accepted but ignored.)
But in ALTER DOMAIN, a NOT NULL constraint looks like
ALTER DOMAIN d1 ADD [ CONSTRAINT conname ] NOT NULL VALUE
where VALUE is where for a table constraint the column name would be.
(This works as of e5da0fe3c2. Before e5da0fe3c2, this syntax
resulted in an internal error.)
But for domains, this latter syntax is confusing and needlessly
inconsistent between CREATE and ALTER. So this changes it to just
ALTER DOMAIN d1 ADD [ CONSTRAINT conname ] NOT NULL
(None of these syntaxes are per SQL standard; we are just living with
the bits of inconsistency that have built up over time.)
In passing, this also changes the psql \dD output to not show not-null
constraints in the column "Check", since it's already shown in the
column "Nullable". This has also been off since e5da0fe3c2.
Reviewed-by: jian he <jian.universality@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/9ec24d7b-633d-463a-84c6-7acff769c9e8%40eisentraut.org
This adjusts various appendStringInfo* function calls to use a more
appropriate and efficient function with the same behavior. For example,
use appendStringInfoChar() when appending a single character rather than
appendStringInfo() and appendStringInfoString() when no formatting is
required rather than using appendStringInfo().
All adjustments made here are in code that's new to v17, so it makes
sense to fix these now rather than wait a few years and make
backpatching harder.
Discussion: https://postgr.es/m/CAApHDvojY2UvMiO+9_55ArTj10P1LBNJyyoGB+C65BLDNT0GsQ@mail.gmail.com
Reviewed-by: Nathan Bossart, Tom Lane
Currently, get_json_expr_options() does not emit the default values
for QUOTES (KEEP QUOTES) and WRAPPER (WITHOUT WRAPPER). That causes
the deparsed JSON_TABLE() columns, such as those contained in a a
view's query, to behave differently when executed than the original
definition. That's because the rules encoded in
transformJsonTableColumns() will choose either JSON_VALUE() or
JSON_QUERY() as implementation to execute a given column's path
expression depending on the QUOTES and WRAPPER specificationd and
they have slightly different semantics.
Reported-by: Jian He <jian.universality@gmail.com>
Discussion: https://postgr.es/m/CACJufxEqhqsfrg_p7EMyo5zak3d767iFDL8vz_4%3DZBHpOtrghw%40mail.gmail.com
This new DDL command splits a single partition into several parititions.
Just like ALTER TABLE ... MERGE PARTITIONS ... command, new patitions are
created using createPartitionTable() function with parent partition as the
template.
This commit comprises quite naive implementation which works in single process
and holds the ACCESS EXCLUSIVE LOCK on the parent table during all the
operations including the tuple routing. This is why this new DDL command
can't be recommended for large partitioned tables under a high load. However,
this implementation come in handy in certain cases even as is.
Also, it could be used as a foundation for future implementations with lesser
locking and possibly parallel.
Discussion: https://postgr.es/m/c73a1746-0cd0-6bdd-6b23-3ae0b7c0c582%40postgrespro.ru
Author: Dmitry Koval
Reviewed-by: Matthias van de Meent, Laurenz Albe, Zhihong Yu, Justin Pryzby
Reviewed-by: Alvaro Herrera, Robert Haas, Stephane Tachoires
Commit 9e8da0f7 taught nbtree to handle ScalarArrayOpExpr quals
natively. This works by pushing down the full context (the array keys)
to the nbtree index AM, enabling it to execute multiple primitive index
scans that the planner treats as one continuous index scan/index path.
This earlier enhancement enabled nbtree ScalarArrayOp index-only scans.
It also allowed scans with ScalarArrayOp quals to return ordered results
(with some notable restrictions, described further down).
Take this general approach a lot further: teach nbtree SAOP index scans
to decide how to execute ScalarArrayOp scans (when and where to start
the next primitive index scan) based on physical index characteristics.
This can be far more efficient. All SAOP scans will now reliably avoid
duplicative leaf page accesses (just like any other nbtree index scan).
SAOP scans whose array keys are naturally clustered together now require
far fewer index descents, since we'll reliably avoid starting a new
primitive scan just to get to a later offset from the same leaf page.
The scan's arrays now advance using binary searches for the array
element that best matches the next tuple's attribute value. Required
scan key arrays (i.e. arrays from scan keys that can terminate the scan)
ratchet forward in lockstep with the index scan. Non-required arrays
(i.e. arrays from scan keys that can only exclude non-matching tuples)
"advance" without the process ever rolling over to a higher-order array.
Naturally, only required SAOP scan keys trigger skipping over leaf pages
(non-required arrays cannot safely end or start primitive index scans).
Consequently, even index scans of a composite index with a high-order
inequality scan key (which we'll mark required) and a low-order SAOP
scan key (which we won't mark required) now avoid repeating leaf page
accesses -- that benefit isn't limited to simpler equality-only cases.
In general, all nbtree index scans now output tuples as if they were one
continuous index scan -- even scans that mix a high-order inequality
with lower-order SAOP equalities reliably output tuples in index order.
This allows us to remove a couple of special cases that were applied
when building index paths with SAOP clauses during planning.
Bugfix commit 807a40c5 taught the planner to avoid generating unsafe
path keys: path keys on a multicolumn index path, with a SAOP clause on
any attribute beyond the first/most significant attribute. These cases
are now all safe, so we go back to generating path keys without regard
for the presence of SAOP clauses (just like with any other clause type).
Affected queries can now exploit scan output order in all the usual ways
(e.g., certain "ORDER BY ... LIMIT n" queries can now terminate early).
Also undo changes from follow-up bugfix commit a4523c5a, which taught
the planner to produce alternative index paths, with path keys, but
without low-order SAOP index quals (filter quals were used instead).
We'll no longer generate these alternative paths, since they can no
longer offer any meaningful advantages over standard index qual paths.
Affected queries thereby avoid all of the disadvantages that come from
using filter quals within index scan nodes. They can avoid extra heap
page accesses from using filter quals to exclude non-matching tuples
(index quals will never have that problem). They can also skip over
irrelevant sections of the index in more cases (though only when nbtree
determines that starting another primitive scan actually makes sense).
There is a theoretical risk that removing restrictions on SAOP index
paths from the planner will break compatibility with amcanorder-based
index AMs maintained as extensions. Such an index AM could have the
same limitations around ordered SAOP scans as nbtree had up until now.
Adding a pro forma incompatibility item about the issue to the Postgres
17 release notes seems like a good idea.
Author: Peter Geoghegan <pg@bowt.ie>
Author: Matthias van de Meent <boekewurm+postgres@gmail.com>
Reviewed-By: Heikki Linnakangas <hlinnaka@iki.fi>
Reviewed-By: Matthias van de Meent <boekewurm+postgres@gmail.com>
Reviewed-By: Tomas Vondra <tomas.vondra@enterprisedb.com>
Discussion: https://postgr.es/m/CAH2-Wz=ksvN_sjcnD1+Bt-WtifRA5ok48aDYnq3pkKhxgMQpcw@mail.gmail.com
JSON_TABLE() allows JSON data to be converted into a relational view
and thus used, for example, in a FROM clause, like other tabular
data. Data to show in the view is selected from a source JSON object
using a JSON path expression to get a sequence of JSON objects that's
called a "row pattern", which becomes the source to compute the
SQL/JSON values that populate the view's output columns. Column
values themselves are computed using JSON path expressions applied to
each of the JSON objects comprising the "row pattern", for which the
SQL/JSON query functions added in 6185c9737c are used.
To implement JSON_TABLE() as a table function, this augments the
TableFunc and TableFuncScanState nodes that are currently used to
support XMLTABLE() with some JSON_TABLE()-specific fields.
Note that the JSON_TABLE() spec includes NESTED COLUMNS and PLAN
clauses, which are required to provide more flexibility to extract
data out of nested JSON objects, but they are not implemented here
to keep this commit of manageable size.
Author: Nikita Glukhov <n.gluhov@postgrespro.ru>
Author: Teodor Sigaev <teodor@sigaev.ru>
Author: Oleg Bartunov <obartunov@gmail.com>
Author: Alexander Korotkov <aekorotkov@gmail.com>
Author: Andrew Dunstan <andrew@dunslane.net>
Author: Amit Langote <amitlangote09@gmail.com>
Author: Jian He <jian.universality@gmail.com>
Reviewers have included (in no particular order):
Andres Freund, Alexander Korotkov, Pavel Stehule, Andrew Alsup,
Erik Rijkers, Zihong Yu, Himanshu Upadhyaya, Daniel Gustafsson,
Justin Pryzby, Álvaro Herrera, Jian He
Discussion: https://postgr.es/m/cd0bb935-0158-78a7-08b5-904886deac4b@postgrespro.ru
Discussion: https://postgr.es/m/20220616233130.rparivafipt6doj3@alap3.anarazel.de
Discussion: https://postgr.es/m/abd9b83b-aa66-f230-3d6d-734817f0995d%40postgresql.org
Discussion: https://postgr.es/m/CA+HiwqE4XTdfb1nW=Ojoy_tQSRhYt-q_kb6i5d4xcKyrLC1Nbg@mail.gmail.com
This SQL-callable function behaves much like our internal utility
function getBaseType(), except it returns NULL rather than failing for
an invalid type OID. (That behavior is modeled on our experience with
other catalog-inquiry functions such as the ACL checking functions.)
The key advantage over doing a join to pg_type is that it will loop
as needed to find the bottom base type of a nest of domains.
Steve Chavez, reviewed by jian he and others
Discussion: https://postgr.es/m/CAGRrpzZSX8j=MQcbCSEisFA=ic=K3bknVfnFjAv1diVJxFHJvg@mail.gmail.com
This allows MERGE commands to include WHEN NOT MATCHED BY SOURCE
actions, which operate on rows that exist in the target relation, but
not in the data source. These actions can execute UPDATE, DELETE, or
DO NOTHING sub-commands.
This is in contrast to already-supported WHEN NOT MATCHED actions,
which operate on rows that exist in the data source, but not in the
target relation. To make this distinction clearer, such actions may
now be written as WHEN NOT MATCHED BY TARGET.
Writing WHEN NOT MATCHED without specifying BY SOURCE or BY TARGET is
equivalent to writing WHEN NOT MATCHED BY TARGET.
Dean Rasheed, reviewed by Alvaro Herrera, Ted Yu and Vik Fearing.
Discussion: https://postgr.es/m/CAEZATCWqnKGc57Y_JanUBHQXNKcXd7r=0R4NEZUVwP+syRkWbA@mail.gmail.com
This brings the titlecasing implementation for the builtin provider
out of formatting.c and into unicode_case.c, along with
unicode_strlower() and unicode_strupper(). Accepts an arbitrary word
boundary callback.
Simple for now, but can be extended to support the Unicode Default
Case Conversion algorithm with full case mapping.
Discussion: https://postgr.es/m/3bc653b5d562ae9e2838b11cb696816c328a489a.camel@j-davis.com
Reviewed-by: Peter Eisentraut
This adds 3 new variants of the random() function:
random(min integer, max integer) returns integer
random(min bigint, max bigint) returns bigint
random(min numeric, max numeric) returns numeric
Each returns a random number x in the range min <= x <= max.
For the numeric function, the number of digits after the decimal point
is equal to the number of digits that "min" or "max" has after the
decimal point, whichever has more.
The main entry points for these functions are in a new C source file.
The existing random(), random_normal(), and setseed() functions are
moved there too, so that they can all share the same PRNG state, which
is kept private to that file.
Dean Rasheed, reviewed by Jian He, David Zhang, Aleksander Alekseev,
and Tomas Vondra.
Discussion: https://postgr.es/m/CAEZATCV89Vxuq93xQdmc0t-0Y2zeeNQTdsjbmV7dyFBPykbV4Q@mail.gmail.com
When the list of roles gathered by roles_is_member_of() grows very
large, a Bloom filter is created to help avoid some linear searches
through the list. The threshold for creating the Bloom filter is
set arbitrarily high and may require future adjustment.
Suggested-by: Tom Lane
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/CAGvXd3OSMbJQwOSc-Tq-Ro1CAz%3DvggErdSG7pv2s6vmmTOLJSg%40mail.gmail.com
Up to now we've rejected cases like
BEGIN;
CREATE TYPE rainbow AS ENUM ();
ALTER TYPE rainbow ADD VALUE 'red';
-- use the value 'red', perhaps in a constraint or index
COMMIT;
The concern is that the uncommitted enum value 'red' might get into
an index and then break the index if we roll back the ALTER ADD.
If the ALTER is in the same transaction as the CREATE then it's really
perfectly safe, but we weren't taking the trouble to identify that.
pg_dump in binary-upgrade mode will emit enum definitions that look
like the above, which up to now didn't fall foul of the unsafe-usage
check because we processed each restore command as a separate
transaction. However an upcoming patch proposes to bundle the restore
commands into large transactions to reduce XID consumption during
pg_upgrade, and that makes this behavior a problem.
To fix, remember the OIDs of enum types created in the current
transaction, and allow use of enum values that are added to one later
in the same transaction. To do this fully correctly in the presence
of subtransactions, we'd have to track subtransaction nesting level of
the CREATE and do maintenance work at every subsequent subtransaction
exit. That seems expensive, and we don't need it to satisfy pg_dump's
usage. Hence, apply the additional optimization only when the CREATE
and ALTER are at outermost transaction level.
Patch by me, reviewed by Andrew Dunstan
Discussion: https://postgr.es/m/1548468.1711220438@sss.pgh.pa.us
Add PERIOD clause to foreign key constraint definitions. This is
supported for range and multirange types. Temporal foreign keys check
for range containment instead of equality.
This feature matches the behavior of the SQL standard temporal foreign
keys, but it works on PostgreSQL's native ranges instead of SQL's
"periods", which don't exist in PostgreSQL (yet).
Reference actions ON {UPDATE,DELETE} {CASCADE,SET NULL,SET DEFAULT}
are not supported yet.
Author: Paul A. Jungwirth <pj@illuminatedcomputing.com>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Reviewed-by: jian he <jian.universality@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/CA+renyUApHgSZF9-nd-a0+OPGharLQLO=mDHcY4_qQ0+noCUVg@mail.gmail.com
This adds the X509 attributes notBefore and notAfter to sslinfo
as well as pg_stat_ssl to allow verifying and identifying the
validity period of the current client certificate. OpenSSL has
APIs for extracting notAfter and notBefore, but they are only
supported in recent versions so we have to calculate the dates
by hand in order to make this work for the older versions of
OpenSSL that we still support.
Original patch by Cary Huang with additional hacking by Jacob
and myself.
Author: Cary Huang <cary.huang@highgo.ca>
Co-author: Jacob Champion <jacob.champion@enterprisedb.com>
Co-author: Daniel Gustafsson <daniel@yesql.se>
Discussion: https://postgr.es/m/182b8565486.10af1a86f158715.2387262617218380588@highgo.ca
This allows us to abstract how/whether table AM uses transaction identifiers.
A custom table AM can use a custom slot, which may not store xmin directly,
but determine the tuple belonging to the current transaction in the other way.
Discussion: https://postgr.es/m/CAPpHfdurb9ycV8udYqM%3Do0sPS66PJ4RCBM1g-bBpvzUfogY0EA%40mail.gmail.com
Reviewed-by: Matthias van de Meent, Mark Dilger, Pavel Borisov
Reviewed-by: Nikita Malakhov, Japin Li
In combination with to_regtype, this allows converting a string to
the "canonicalized" form emitted by format_type. That usage requires
parsing the string twice, which is slightly annoying but not really
too expensive. We considered alternatives such as returning a record
type, but that way was notationally uglier than this, and possibly
less flexible.
Like to_regtype(), we'd rather that this return NULL for any bad
input, but the underlying type-parsing logic isn't yet capable of
not throwing syntax errors. Adjust the documentation for both
functions to point that out.
In passing, fix up a couple of nearby entries in the System Catalog
Information Functions table that had not gotten the word about our
since-v13 convention for displaying function usage examples.
David Wheeler and Erik Wienhold, reviewed by Pavel Stehule, Jim Jones,
and others.
Discussion: https://postgr.es/m/DF2324CA-2673-4ABE-B382-26B5770B6AA3@justatheory.com
The builtin C.UTF-8 locale has similar semantics to the libc locale of
the same name. That is, code point sort order (fast, memcmp-based)
combined with Unicode semantics for character operations such as
pattern matching, regular expressions, and
LOWER()/INITCAP()/UPPER(). The character semantics are based on
Unicode simple case mappings.
The builtin provider's C.UTF-8 offers several important advantages
over libc:
* faster sorting -- benefits from additional optimizations such as
abbreviated keys and varstrfastcmp_c
* faster case conversion, e.g. LOWER(), at least compared with some
libc implementations
* available on all platforms with identical semantics, and the
semantics are stable, testable, and documentable within a given
Postgres major version
Being based on memcmp, the builtin C.UTF-8 locale does not offer
natural language sort order. But it is an improvement for most use
cases that might otherwise use libc's "C.UTF-8" locale, as well as
many use cases that use libc's "C" locale.
Discussion: https://postgr.es/m/ff4c2f2f9c8fc7ca27c1c24ae37ecaeaeaff6b53.camel%40j-davis.com
Reviewed-by: Daniel Vérité, Peter Eisentraut, Jeremy Schneider
Historically we've printed SubPlan expression nodes as "(SubPlan N)",
which is pretty uninformative. Trying to reproduce the original SQL
for the subquery is still as impractical as before, and would be
mighty verbose as well. However, we can still do better than that.
Displaying the "testexpr" when present, and adding a keyword to
indicate the SubLinkType, goes a long way toward showing what's
really going on.
In addition, this patch gets rid of EXPLAIN's use of "$n" to represent
subplan and initplan output Params. Instead we now print "(SubPlan
N).colX" or "(InitPlan N).colX" to represent the X'th output column
of that subplan. This eliminates confusion with the use of "$n" to
represent PARAM_EXTERN Params, and it's useful for the first part of
this change because it eliminates needing some other indication of
which subplan is referenced by a SubPlan that has a testexpr.
In passing, this adds simple regression test coverage of the
ROWCOMPARE_SUBLINK code paths, which were entirely unburdened
by testing before.
Tom Lane and Dean Rasheed, reviewed by Aleksander Alekseev.
Thanks to Chantal Keller for raising the question of whether
this area couldn't be improved.
Discussion: https://postgr.es/m/2838538.1705692747@sss.pgh.pa.us
Based on comments from Peter Eisentraut.
* Document CREATE DATABASE ... BUILTIN_LOCALE.
* Determine required encoding based on locale name for CREATE
COLLATION. Use -1 for "C" (requires catversion bump).
* initdb output fixups.
* Make ctype_is_c a constant true for now.
* Fixups to ICU 010_create_database.pl test.
Discussion: https://postgr.es/m/4135cf11-206d-40ed-96c0-9363c1232379@eisentraut.org
This allows a RETURNING clause to be appended to a MERGE query, to
return values based on each row inserted, updated, or deleted. As with
plain INSERT, UPDATE, and DELETE commands, the returned values are
based on the new contents of the target table for INSERT and UPDATE
actions, and on its old contents for DELETE actions. Values from the
source relation may also be returned.
As with INSERT/UPDATE/DELETE, the output of MERGE ... RETURNING may be
used as the source relation for other operations such as WITH queries
and COPY commands.
Additionally, a special function merge_action() is provided, which
returns 'INSERT', 'UPDATE', or 'DELETE', depending on the action
executed for each row. The merge_action() function can be used
anywhere in the RETURNING list, including in arbitrary expressions and
subqueries, but it is an error to use it anywhere outside of a MERGE
query's RETURNING list.
Dean Rasheed, reviewed by Isaac Morland, Vik Fearing, Alvaro Herrera,
Gurjeet Singh, Jian He, Jeff Davis, Merlin Moncure, Peter Eisentraut,
and Wolfgang Walther.
Discussion: http://postgr.es/m/CAEZATCWePEGQR5LBn-vD6SfeLZafzEm2Qy_L_Oky2=qw2w3Pzg@mail.gmail.com
Given a subplan in a MERGE query, EXPLAIN would sometimes fail to
properly display expressions involving Params referencing variables in
other parts of the plan tree.
This would affect subplans outside the topmost join plan node, for
which expansion of Params would go via the top-level ModifyTable plan
node. The problem was that "inner_tlist" for the ModifyTable node's
deparse_namespace was set to the join node's targetlist, but
"inner_plan" was set to the ModifyTable node itself, rather than the
join node, leading to incorrect results when descending to the
referenced variable.
Fix and backpatch to v15, where MERGE was introduced.
Discussion: https://postgr.es/m/CAEZATCWAv-sZuH%2BwG5xJ-%2BGt7qGNGX8wUQd3XYydMFDKgRB9nw%40mail.gmail.com
This function returns the chunk_id of an on-disk TOASTed value. If
the value is un-TOASTed or not on-disk, it returns NULL. This is
useful for identifying which values are actually TOASTed and for
investigating "unexpected chunk number" errors.
Bumps catversion.
Author: Yugo Nagata
Reviewed-by: Jian He
Discussion: https://postgr.es/m/20230329105507.d764497456eeac1ca491b5bd%40sraoss.co.jp
