VACUUM's reference page had this text, but ANALYZE's didn't. That's
a clear oversight given that section 5.7 explicitly delegates the
responsibility to define permissions requirements to the individual
commands' man pages.
Per gripe from Isaac Morland. Back-patch to all supported branches.
Discussion: https://postgr.es/m/CAMsGm5fp3oBUs-2iRfii0iEO=fZuJALVyM2zJLhNTjG34gpAVQ@mail.gmail.com
Commit aa27977fe21a7dfa4da4376ad66ae37cb8f0d0b5 introduced this
restriction for pg_temp.function_name(arg); do likewise for types
created in temporary schemas. Programs that this breaks should add
"pg_temp." schema qualification or switch to arg::type_name syntax.
Back-patch to 9.4 (all supported versions).
Reviewed by Tom Lane. Reported by Tom Lane.
Security: CVE-2019-10208
The table has not been updated for some commands introduced in recent
releases, so refresh it. While on it, reorder entries alphabetically.
Backpatch all the way down for all the commands which have gone
missing.
Reported-by: Jeremy Smith
Discussion: https://postgr.es/m/15883-afff0ea3cc2dbbb6@postgresql.org
Backpatch-through: 9.4
Using pg_receivewal with synchronous_commit = remote_apply set in the
backend is incompatible if pg_receivewal is a synchronous standby as it
never applies WAL, so document this problem and solutions to it.
Backpatch to 9.6, where remote_apply has been added.
Author: Robert Haas, Jesper Pedersen
Reviewed-by: Laurenz Albe, Álvaro Herrera, Michael Paquier
Discussion: https://postgr.es/m/1427a2d3-1e51-9335-1931-4f8853d90d5e@redhat.com
Backpatch-through: 9.6
datatype.sgml failed to explain that boolin() accepts any unique
prefix of the basic input strings. Indeed it was actively misleading
because it called out a few minimal prefixes without mentioning that
there were more valid inputs.
I also felt that it wasn't doing anybody any favors by conflating
SQL key words, valid Boolean input, and string literals containing
valid Boolean input. Rewrite in hopes of reducing the confusion.
Per bug #15836 from Yuming Wang, as diagnosed by David Johnston.
Back-patch to supported branches.
Discussion: https://postgr.es/m/15836-656fab055735f511@postgresql.org
A few questionable partitioning designs have been cropping up lately
around the mailing lists. Generally, these cases have been partitioning
using too many partitions which have caused performance or OOM problems for
the users.
Since we have very little else to guide users into good design, here we
add a new section to the partitioning documentation with some best
practise guidelines for good design.
Reviewed-by: Justin Pryzby, Amit Langote, Alvaro Herrera
Discussion: https://postgr.es/m/CAKJS1f-2rx+E9mG3xrCVHupefMjAp1+tpczQa9SEOZWyU7fjEA@mail.gmail.com
Backpatch-through: 10
json_to_record(), when an output column is declared as type json or jsonb,
should emit the corresponding field of the input JSON object. But it got
this slightly wrong when the field is just a string literal: it failed to
escape the contents of the string. That typically resulted in syntax
errors if the string contained any double quotes or backslashes.
jsonb_to_record() handles such cases correctly, but I added corresponding
test cases for it too, to prevent future backsliding.
Improve the documentation, as it provided only a very hand-wavy
description of the conversion rules used by these functions.
Per bug report from Robert Vollmert. Back-patch to v10 where the
error was introduced (by commit cf35346e8).
Note that PG 9.4 - 9.6 also get this case wrong, but differently so:
they feed the de-escaped contents of the string literal to json[b]_in.
That behavior is less obviously wrong, so possibly it's being depended on
in the field, so I won't risk trying to make the older branches behave
like the newer ones.
Discussion: https://postgr.es/m/D6921B37-BD8E-4664-8D5F-DB3525765DCD@vllmrt.net
5871b884 introduced pg_trgm.word_similarity_threshold GUC, but its documentation
contains wrong indentation. This commit fixes that. Backpatch for easier
backpatching of other documentation fixes.
Discussion: https://postgr.es/m/4c735d30-ab59-fc0e-45d8-f90eb5ed3855%402ndquadrant.com
Author: Ian Barwick
Backpatch-through: 9.6
Support of CHECK OPTION for updatable views has been added in 9.4, but
the documentation of information_schema never got the call even if the
information displayed is correct.
Author: Gilles Darold
Discussion: https://postgr.es/m/75d07704-6c74-4f26-656a-10045c01a17e@darold.net
Backpatch-through: 9.4
An upcoming HEAD-only patch will standardize the terminology around
ItemIdData variables/line pointers, ending the practice of referring to
them as "item pointers". Make the "Database Page Layout" docs
consistent with the new policy. The term "item identifier" is already
used in the same section, so stick with that.
Discussion: https://postgr.es/m/CAH2-Wz=c=MZQjUzde3o9+2PLAPuHTpVZPPdYxN=E4ndQ2--8ew@mail.gmail.com
Backpatch: All supported branches.
Previously it's documented that use of replication functions is
restricted to superusers. This is true for the functions which
use replication origin, but not for pg_logicl_emit_message() and
functions which use replication slot. For example, not only
superusers but also users with REPLICATION privilege is allowed
to use the functions for replication slot. This commit fixes
the documentation for the privileges required for those replication
functions.
Back-patch to 9.4 (all supported versions).
Author: Matsumura Ryo
Discussion: https://postgr.es/m/03040DFF97E6E54E88D3BFEE5F5480F74ABA6E16@G01JPEXMBYT04
This commit adds the description that "non-exclusive" pg_start_backup
and pg_stop_backup can be executed even during recovery. Previously
it was wrongly documented that those functions are not allowed to be
executed during recovery.
Back-patch to 9.6 where non-exclusive backup API was added.
Discussion: https://postgr.es/m/CAHGQGwEuAYrEX7Yhmf2MCrTK81HDkkg-JqsOUh8zw6+zYC5zzw@mail.gmail.com
A confusion which comes a lot from users is that it is necessary to
issue a checkpoint on a freshly-promoted standby so as its control file
has up-to-date timeline information which is used by pg_rewind to
validate the operation. Let's document that properly. This is
back-patched down to 9.5 where pg_rewind has been introduced.
Author: Michael Paquier
Reviewed-by: Magnus Hagander
Discussion: https://postgr.es/m/CABUevEz5bpvbwVsYCaSMV80CBZ5-82nkMzbb+Bu=h1m=rLdn=g@mail.gmail.com
Backpatch-through: 9.5
Previously we were using the SQL:2003 definition, which doesn't allow
this, but that creates a serious dump/restore gotcha: there is no
setting of xmloption that will allow all valid XML data. Hence,
switch to the 2006 definition.
Since libxml doesn't accept <!DOCTYPE> directives in the mode we
use for CONTENT parsing, the implementation is to detect <!DOCTYPE>
in the input and switch to DOCUMENT parsing mode. This should not
cost much, because <!DOCTYPE> should be close to the front of the
input if it's there at all. It's possible that this causes the
error messages for malformed input to be slightly different than
they were before, if said input includes <!DOCTYPE>; but that does
not seem like a big problem.
In passing, buy back a few cycles in parsing of large XML documents
by not doing strlen() of the whole input in parse_xml_decl().
Back-patch because dump/restore failures are not nice. This change
shouldn't break any cases that worked before, so it seems safe to
back-patch.
Chapman Flack (revised a bit by me)
Discussion: https://postgr.es/m/CAN-V+g-6JqUQEQZ55Q3toXEN6d5Ez5uvzL4VR+8KtvJKj31taw@mail.gmail.com
1. The PARTITION OF clause of CREATE FOREIGN TABLE was not explained in
the CREATE FOREIGN TABLE reference page. Add it.
(Postgres 10 onwards)
2. The limitation that tuple routing cannot target partitions that are
foreign tables was not documented clearly enough. Improve wording.
(Postgres 10 onwards)
3. The UPDATE tuple re-routing concurrency behavior was explained in
the DDL chapter, which doesn't seem the right place. Move it to the
UPDATE reference page instead. (Postgres 11 onwards).
Authors: Amit Langote, David Rowley.
Reviewed-by: Etsuro Fujita.
Reported-by: Derek Hans
Discussion: https://postgr.es/m/CAGrP7a3Xc1Qy_B2WJcgAD8uQTS_NDcJn06O5mtS_Ne1nYhBsyw@mail.gmail.com
Reflecting an updated parameter value requires a server restart, which
was not mentioned in the documentation and in postgresql.conf.sample.
Reported-by: Thomas Poty
Discussion: https://postgr.es/m/15659-0cd812f13027a2d8@postgresql.org
The dblink documentation claims that an empty string is returned if there
has been no error, however OK is actually returned in that case. Also,
clarify that an async error may not be seen unless dblink_is_busy() or
dblink_get_result() have been called first.
Backpatch to all supported branches.
Reported-by: realyota
Backpatch-through: 9.4
Discussion: https://postgr.es/m/153371978486.1298.2091761143788088262@wrigleys.postgresql.org
The previous ordering of these steps satisfied the nominal requirement
that set_rel_pathlist_hook could editorialize on the whole set of Paths
constructed for a base relation. In practice, though, trying to change
the set of partial paths was impossible. Adding one didn't work because
(a) it was too late to be included in Gather paths made by the core code,
and (b) calling add_partial_path after generate_gather_paths is unsafe,
because it might try to delete a path it thinks is dominated, but that
is already embedded in some Gather path(s). Nor could the hook safely
remove partial paths, for the same reason that they might already be
embedded in Gathers.
Better to call extensions first, let them add partial paths as desired,
and then gather. In v11 and up, we already doubled down on that ordering
by postponing gathering even further for single-relation queries; so even
if the hook wished to editorialize on Gather path construction, it could
not.
Report and patch by KaiGai Kohei. Back-patch to 9.6 where Gather paths
were added.
Discussion: https://postgr.es/m/CAOP8fzahwpKJRTVVTqo2AE=mDTz_efVzV6Get_0=U3SO+-ha1A@mail.gmail.com
Historically we've had each release branch include all prior branches'
notes, including minor-release changes, back to the beginning of the
project. That's basically an O(N^2) proposition, and it was starting to
catch up with us: as of HEAD the back-branch release notes alone accounted
for nearly 30% of the documentation. While there's certainly some value
in easy access to back-branch notes, this is getting out of hand.
Hence, switch over to the rule that each branch contains only its own
release notes. So as to not make older notes too hard to find, each
branch will provide URLs for the immediately preceding branches'
release notes on the project website.
There might be value in providing aggregated notes across all branches
somewhere on the website, but that's a task for another day.
Discussion: https://postgr.es/m/cbd4aeb5-2d9c-8b84-e968-9e09393d4c83@postgresql.org
Add PG_CFLAGS, PG_CXXFLAGS, and PG_LDFLAGS variables to pgxs.mk which
will be appended or prepended to the corresponding make variables.
Notably, there was previously no way to pass custom CXXFLAGS to third
party extension module builds, COPT and PROFILE supporting only CFLAGS
and LDFLAGS.
Backpatch all the way down to ease integration with existing
extensions.
Author: Christoph Berg
Reviewed-by: Andres Freund, Tom Lane, Michael Paquier
Discussion: https://postgr.es/m/20181113104005.GA32154@msg.credativ.de
Backpatch-through: 9.4
