The ExecReScan machinery contains various optimizations for postponing
or skipping rescans of plan subtrees; for example a HashAgg node may
conclude that it can re-use the table it built before, instead of
re-reading its input subtree. But that is wrong if the input contains
a parallel-aware table scan node, since the portion of the table scanned
by the leader process is likely to vary from one rescan to the next.
This explains the timing-dependent buildfarm failures we saw after
commit a2b70c89c.
The established mechanism for showing that a plan node's output is
potentially variable is to mark it as depending on some runtime Param.
Hence, to fix this, invent a dummy Param (one that has a PARAM_EXEC
parameter number, but carries no actual value) associated with each Gather
or GatherMerge node, mark parallel-aware nodes below that node as dependent
on that Param, and arrange for ExecReScanGather[Merge] to flag that Param
as changed whenever the Gather[Merge] node is rescanned.
This solution breaks an undocumented assumption made by the parallel
executor logic, namely that all rescans of nodes below a Gather[Merge]
will happen synchronously during the ReScan of the top node itself.
But that's fundamentally contrary to the design of the ExecReScan code,
and so was doomed to fail someday anyway (even if you want to argue
that the bug being fixed here wasn't a failure of that assumption).
A follow-on patch will address that issue. In the meantime, the worst
that's expected to happen is that given very bad timing luck, the leader
might have to do all the work during a rescan, because workers think
they have nothing to do, if they are able to start up before the eventual
ReScan of the leader's parallel-aware table scan node has reset the
shared scan state.
Although this problem exists in 9.6, there does not seem to be any way
for it to manifest there. Without GatherMerge, it seems that a plan tree
that has a rescan-short-circuiting node below Gather will always also
have one above it that will short-circuit in the same cases, preventing
the Gather from being rescanned. Hence we won't take the risk of
back-patching this change into 9.6. But v10 needs it.
Discussion: https://postgr.es/m/CAA4eK1JkByysFJNh9M349u_nNjqETuEnY_y1VUc_kJiU0bxtaQ@mail.gmail.com
If the user modifies a view that has CHECK OPTIONs and this gets
translated into a modification to an underlying relation which happens
to be a foreign table, the check options should be enforced. In the
normal code path, that was happening properly, but it was not working
properly for "direct" modification because the whole operation gets
pushed to the remote side in that case and we never have an option to
enforce the constraint against individual tuples. Fix by disabling
direct modification when there is a need to enforce CHECK OPTIONs.
Etsuro Fujita, reviewed by Kyotaro Horiguchi and by me.
Discussion: http://postgr.es/m/f8a48f54-6f02-9c8a-5250-9791603171ee@lab.ntt.co.jp
Add error checks in some places that were calling get_opfamily_member
or get_opfamily_proc and just assuming that the call could never fail.
Also, standardize the wording for such errors in some other places.
None of these errors are expected in normal use, hence they're just
elog not ereport. But they may be handy for diagnosing omissions in
custom opclasses.
Rushabh Lathia found the oversight in RelationBuildPartitionKey();
I found the others by grepping for all callers of these functions.
Discussion: https://postgr.es/m/CAGPqQf2R9Nk8htpv0FFi+FP776EwMyGuORpc9zYkZKC8sFQE3g@mail.gmail.com
Don't move parenthesized lines to the left, even if that means they
flow past the right margin.
By default, BSD indent lines up statement continuation lines that are
within parentheses so that they start just to the right of the preceding
left parenthesis. However, traditionally, if that resulted in the
continuation line extending to the right of the desired right margin,
then indent would push it left just far enough to not overrun the margin,
if it could do so without making the continuation line start to the left of
the current statement indent. That makes for a weird mix of indentations
unless one has been completely rigid about never violating the 80-column
limit.
This behavior has been pretty universally panned by Postgres developers.
Hence, disable it with indent's new -lpl switch, so that parenthesized
lines are always lined up with the preceding left paren.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
Change pg_bsd_indent to follow upstream rules for placement of comments
to the right of code, and remove pgindent hack that caused comments
following #endif to not obey the general rule.
Commit e3860ffa4dd0dad0dd9eea4be9cc1412373a8c89 wasn't actually using
the published version of pg_bsd_indent, but a hacked-up version that
tried to minimize the amount of movement of comments to the right of
code. The situation of interest is where such a comment has to be
moved to the right of its default placement at column 33 because there's
code there. BSD indent has always moved right in units of tab stops
in such cases --- but in the previous incarnation, indent was working
in 8-space tab stops, while now it knows we use 4-space tabs. So the
net result is that in about half the cases, such comments are placed
one tab stop left of before. This is better all around: it leaves
more room on the line for comment text, and it means that in such
cases the comment uniformly starts at the next 4-space tab stop after
the code, rather than sometimes one and sometimes two tabs after.
Also, ensure that comments following #endif are indented the same
as comments following other preprocessor commands such as #else.
That inconsistency turns out to have been self-inflicted damage
from a poorly-thought-through post-indent "fixup" in pgindent.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
In a CHECK clause, a null result means true, whereas in a WHERE clause
it means false. predtest.c provided different functions depending on
which set of semantics applied to the predicate being proved, but had
no option to control what a null meant in the clauses provided as
axioms. Add one.
Use that in the partitioning code when figuring out whether the
validation scan on a new partition can be skipped. Rip out the
old logic that attempted (not very successfully) to compensate
for the absence of the necessary support in predtest.c.
Ashutosh Bapat and Robert Haas, reviewed by Amit Langote and
incorporating feedback from Tom Lane.
Discussion: http://postgr.es/m/CAFjFpReT_kq_uwU_B8aWDxR7jNGE=P0iELycdq5oupi=xSQTOw@mail.gmail.com
skewColType/skewColTypmod are no longer used in the wake of commit
9aab83fc5, and seem unlikely to be wanted in future, so let's drop 'em.
Discussion: https://postgr.es/m/16364.1494520862@sss.pgh.pa.us
Even though no actual tuples are ever inserted into a partitioned
table (the actual tuples are in the partitions, not the partitioned
table itself), we still need to have a ResultRelInfo for the
partitioned table, or per-statement triggers won't get fired.
Amit Langote, per a report from Rajkumar Raghuwanshi. Reviewed by me.
Discussion: http://postgr.es/m/CAKcux6%3DwYospCRY2J4XEFuVy0L41S%3Dfic7rmkbsU-GXhhSbmBg%40mail.gmail.com
We were applying the use_physical_tlist optimization to all relation
scan plans, even those implemented by custom scan providers. However,
that's a bad idea for a couple of reasons. The custom provider might
be unable to provide columns that it hadn't expected to be asked for
(for example, the custom scan might depend on an index-only scan).
Even more to the point, there's no good reason to suppose that this
"optimization" is a win for a custom scan; whatever the custom provider
is doing is likely not based on simply returning physical heap tuples.
(As a counterexample, if the custom scan is an interface to a column store,
demanding all columns would be a huge loss.) If it is a win, the custom
provider could make that decision for itself and insert a suitable
pathtarget into the path, anyway.
Per discussion with Dmitry Ivanov. Back-patch to 9.5 where custom scan
support was introduced. The argument that the custom provider can adjust
the behavior by changing the pathtarget only applies to 9.6+, but on
balance it seems more likely that use_physical_tlist will hurt custom
scans than help them.
Discussion: https://postgr.es/m/e29ddd30-8ef9-4da5-a50b-2bb7b8c7198d@postgrespro.ru
We'd managed to avoid doing this so far, but it seems pretty obvious
that it would be forced on us some day, and this is much the cleanest
way of approaching the open problem that parallel-unsafe subplans are
being transmitted to parallel workers. Anyway there's no space cost
due to alignment considerations, and the time cost is pretty minimal
since we're just copying the flag from the corresponding Path node.
(At least in most cases ... some of the klugier spots in createplan.c
have to work a bit harder.)
In principle we could perhaps get rid of SubPlan.parallel_safe,
but I thought it better to keep that in case there are reasons to
consider a SubPlan unsafe even when its child plan is parallel-safe.
This patch doesn't actually do anything with the new flags, but
I thought I'd commit it separately anyway.
Note: although this touches outfuncs/readfuncs, there's no need for
a catversion bump because Plan trees aren't stored on disk.
Discussion: https://postgr.es/m/87tw5x4vcu.fsf@credativ.de
This extends the castNode() notation introduced by commit 5bcab1114 to
provide, in one step, extraction of a list cell's pointer and coercion to
a concrete node type. For example, "lfirst_node(Foo, lc)" is the same
as "castNode(Foo, lfirst(lc))". Almost half of the uses of castNode
that have appeared so far include a list extraction call, so this is
pretty widely useful, and it saves a few more keystrokes compared to the
old way.
As with the previous patch, back-patch the addition of these macros to
pg_list.h, so that the notation will be available when back-patching.
Patch by me, after an idea of Andrew Gierth's.
Discussion: https://postgr.es/m/14197.1491841216@sss.pgh.pa.us
If there can certainly be no more than one matching inner row for a given
outer row, then the executor can move on to the next outer row as soon as
it's found one match; there's no need to continue scanning the inner
relation for this outer row. This saves useless scanning in nestloop
and hash joins. In merge joins, it offers the opportunity to skip
mark/restore processing, because we know we have not advanced past the
first possible match for the next outer row.
Of course, the devil is in the details: the proof of uniqueness must
depend only on joinquals (not otherquals), and if we want to skip
mergejoin mark/restore then it must depend only on merge clauses.
To avoid adding more planning overhead than absolutely necessary,
the present patch errs in the conservative direction: there are cases
where inner_unique or skip_mark_restore processing could be used, but
it will not do so because it's not sure that the uniqueness proof
depended only on "safe" clauses. This could be improved later.
David Rowley, reviewed and rather heavily editorialized on by me
Discussion: https://postgr.es/m/CAApHDvqF6Sw-TK98bW48TdtFJ+3a7D2mFyZ7++=D-RyPsL76gw@mail.gmail.com
Currently, the only type of child relation is an "other member rel",
which is the child of a baserel, but in the future joins and even
upper relations may have child rels. To facilitate that, introduce
macros that test to test for particular RelOptKind values, and use
them in various places where they help to clarify the sense of a test.
(For example, a test may allow RELOPT_OTHER_MEMBER_REL either because
it intends to allow child rels, or because it intends to allow simple
rels.)
Also, remove find_childrel_top_parent, which will not work for a
child rel that is not a baserel. Instead, add a new RelOptInfo
member top_parent_relids to track the same kind of information in a
more generic manner.
Ashutosh Bapat, slightly tweaked by me. Review and testing of the
patch set from which this was taken by Rajkumar Raghuwanshi and Rafia
Sabih.
Discussion: http://postgr.es/m/CA+TgmoagTnF2yqR3PT2rv=om=wJiZ4-A+ATwdnriTGku1CLYxA@mail.gmail.com
A QueryEnvironment concept is added, which allows new types of
objects to be passed into queries from parsing on through
execution. At this point, the only thing implemented is a
collection of EphemeralNamedRelation objects -- relations which
can be referenced by name in queries, but do not exist in the
catalogs. The only type of ENR implemented is NamedTuplestore, but
provision is made to add more types fairly easily.
An ENR can carry its own TupleDesc or reference a relation in the
catalogs by relid.
Although these features can be used without SPI, convenience
functions are added to SPI so that ENRs can easily be used by code
run through SPI.
The initial use of all this is going to be transition tables in
AFTER triggers, but that will be added to each PL as a separate
commit.
An incidental effect of this patch is to produce a more informative
error message if an attempt is made to modify the contents of a CTE
from a referencing DML statement. No tests previously covered that
possibility, so one is added.
Kevin Grittner and Thomas Munro
Reviewed by Heikki Linnakangas, David Fetter, and Thomas Munro
with valuable comments and suggestions from many others
Commit 45be99f8cd5d606086e0a458c9c72910ba8a613d removed GatherPath's
num_workers field, but this is entirely bogus. Normally, a path's
parallel_workers flag is supposed to indicate the number of workers
that it wants, and should be 0 for a non-partial path. In that
commit, I mistakenly thought that GatherPath could also use that field
to indicate the number of workers that it would try to start, but
that's disastrous, because then it can propagate up to higher nodes in
the plan tree, which will then get incorrect rowcounts because the
parallel_workers flag is involved in computing those values. Repair
by putting the separate field back.
Report by Tomas Vondra. Patch by me, reviewed by Amit Kapila.
Discussion: http://postgr.es/m/f91b4a44-f739-04bd-c4b6-f135bd643669@2ndquadrant.com
copyObject() is declared to return void *, which allows easily assigning
the result independent of the input, but it loses all type checking.
If the compiler supports typeof or something similar, cast the result to
the input type. This creates a greater amount of type safety. In some
cases, where the result is assigned to a generic type such as Node * or
Expr *, new casts are now necessary, but in general casts are now
unnecessary in the normal case and indicate that something unusual is
happening.
Reviewed-by: Mark Dilger <hornschnorter@gmail.com>
This extends the Aggregate node with two new features: HashAggregate
can now run multiple hashtables concurrently, and a new strategy
MixedAggregate populates hashtables while doing sorted grouping.
The planner will now attempt to save as many sorts as possible when
planning grouping sets queries, while not exceeding work_mem for the
estimated combined sizes of all hashtables used. No SQL-level changes
are required. There should be no user-visible impact other than the
new EXPLAIN output and possible changes to result ordering when ORDER
BY was not used (which affected a few regression tests). The
enable_hashagg option is respected.
Author: Andrew Gierth
Reviewers: Mark Dilger, Andres Freund
Discussion: https://postgr.es/m/87vatszyhj.fsf@news-spur.riddles.org.uk
Partitioned tables do not contain any data; only their unpartitioned
descendents need to be scanned. However, the partitioned tables still
need to be locked, even though they're not scanned. To make that
work, Append and MergeAppend relations now need to carry a list of
(unscanned) partitioned relations that must be locked, and InitPlan
must lock all partitioned result relations.
Aside from the obvious advantage of avoiding some work at execution
time, this has two other advantages. First, it may improve the
planner's decision-making in some cases since the empty relation
might throw things off. Second, it paves the way to getting rid of
the storage for partitioned tables altogether.
Amit Langote, reviewed by me.
Discussion: http://postgr.es/m/6837c359-45c4-8044-34d1-736756335a15@lab.ntt.co.jp
This logic was adapated from create_merge_append_plan, but the two
cases aren't really analogous, because create_merge_append_plan is not
projection-capable and must therefore have a tlist identical to that
of the underlying paths. Overwriting the tlist of Gather Merge with
whatever the underlying plan happens to produce is no good at all.
Patch by me, reviewed by Rushabh Lathia, who also reported the issue
and made an initial attempt at a fix.
Discussion: http://postgr.es/m/CA+Tgmob_-oHEOBfT9S25bjqokdqv8e8xEmh9zOY+3MPr_LmuhA@mail.gmail.com
Neha Sharma reported these to Rushabh Lathia just after I commit
355d3993c53ed62c5b53d020648e4fbcfbf5f155 went in. The patch is
Rushabh's, with input from me.
Like Gather, we spawn multiple workers and run the same plan in each
one; however, Gather Merge is used when each worker produces the same
output ordering and we want to preserve that output ordering while
merging together the streams of tuples from various workers. (In a
way, Gather Merge is like a hybrid of Gather and MergeAppend.)
This works out to a win if it saves us from having to perform an
expensive Sort. In cases where only a small amount of data would need
to be sorted, it may actually be faster to use a regular Gather node
and then sort the results afterward, because Gather Merge sometimes
needs to wait synchronously for tuples whereas a pure Gather generally
doesn't. But if this avoids an expensive sort then it's a win.
Rushabh Lathia, reviewed and tested by Amit Kapila, Thomas Munro,
and Neha Sharma, and reviewed and revised by me.
Discussion: http://postgr.es/m/CAGPqQf09oPX-cQRpBKS0Gq49Z+m6KBxgxd_p9gX8CKk_d75HoQ@mail.gmail.com
The index is scanned by a single process, but then all cooperating
processes can iterate jointly over the resulting set of heap blocks.
In the future, we might also want to support using a parallel bitmap
index scan to set up for a parallel bitmap heap scan, but that's a
job for another day.
Dilip Kumar, with some corrections and cosmetic changes by me. The
larger patch set of which this is a part has been reviewed and tested
by (at least) Andres Freund, Amit Khandekar, Tushar Ahuja, Rafia
Sabih, Haribabu Kommi, Thomas Munro, and me.
Discussion: http://postgr.es/m/CAFiTN-uc4=0WxRGfCzs-xfkMYcSEWUC-Fon6thkJGjkh9i=13A@mail.gmail.com
XMLTABLE is defined by the SQL/XML standard as a feature that allows
turning XML-formatted data into relational form, so that it can be used
as a <table primary> in the FROM clause of a query.
This new construct provides significant simplicity and performance
benefit for XML data processing; what in a client-side custom
implementation was reported to take 20 minutes can be executed in 400ms
using XMLTABLE. (The same functionality was said to take 10 seconds
using nested PostgreSQL XPath function calls, and 5 seconds using
XMLReader under PL/Python).
The implemented syntax deviates slightly from what the standard
requires. First, the standard indicates that the PASSING clause is
optional and that multiple XML input documents may be given to it; we
make it mandatory and accept a single document only. Second, we don't
currently support a default namespace to be specified.
This implementation relies on a new executor node based on a hardcoded
method table. (Because the grammar is fixed, there is no extensibility
in the current approach; further constructs can be implemented on top of
this such as JSON_TABLE, but they require changes to core code.)
Author: Pavel Stehule, Álvaro Herrera
Extensively reviewed by: Craig Ringer
Discussion: https://postgr.es/m/CAFj8pRAgfzMD-LoSmnMGybD0WsEznLHWap8DO79+-GTRAPR4qA@mail.gmail.com
If we forcibly place a Material node atop a finished subplan, we need
to move any initPlans attached to the subplan up to the Material node,
in order to keep SS_finalize_plan() happy. I'd figured this out in
commit 7b67a0a49 for the case of materializing a cursor plan, but out of
an abundance of caution, I put the initPlan movement hack at the call
site for that case, rather than inside materialize_finished_plan().
That was the wrong thing, because it turns out to also be necessary for
the only other caller of materialize_finished_plan(), ie subselect.c.
We lacked any test cases that exposed the mistake, but bug#14524 from
Wei Congrui shows that it's possible to get an initPlan reference into
the top tlist in that case too, and then SS_finalize_plan() complains.
Hence, move the hack into materialize_finished_plan().
In HEAD, also relocate some recently-added tests in subselect.sql, which
I'd unthinkingly dropped into the middle of a sequence of related tests.
Report: https://postgr.es/m/20170202060020.1400.89021@wrigleys.postgresql.org
Evaluation of set returning functions (SRFs_ in the targetlist (like SELECT
generate_series(1,5)) so far was done in the expression evaluation (i.e.
ExecEvalExpr()) and projection (i.e. ExecProject/ExecTargetList) code.
This meant that most executor nodes performing projection, and most
expression evaluation functions, had to deal with the possibility that an
evaluated expression could return a set of return values.
That's bad because it leads to repeated code in a lot of places. It also,
and that's my (Andres's) motivation, made it a lot harder to implement a
more efficient way of doing expression evaluation.
To fix this, introduce a new executor node (ProjectSet) that can evaluate
targetlists containing one or more SRFs. To avoid the complexity of the old
way of handling nested expressions returning sets (e.g. having to pass up
ExprDoneCond, and dealing with arguments to functions returning sets etc.),
those SRFs can only be at the top level of the node's targetlist. The
planner makes sure (via split_pathtarget_at_srfs()) that SRF evaluation is
only necessary in ProjectSet nodes and that SRFs are only present at the
top level of the node's targetlist. If there are nested SRFs the planner
creates multiple stacked ProjectSet nodes. The ProjectSet nodes always get
input from an underlying node.
We also discussed and prototyped evaluating targetlist SRFs using ROWS
FROM(), but that turned out to be more complicated than we'd hoped.
While moving SRF evaluation to ProjectSet would allow to retain the old
"least common multiple" behavior when multiple SRFs are present in one
targetlist (i.e. continue returning rows until all SRFs are at the end of
their input at the same time), we decided to instead only return rows till
all SRFs are exhausted, returning NULL for already exhausted ones. We
deemed the previous behavior to be too confusing, unexpected and actually
not particularly useful.
As a side effect, the previously prohibited case of multiple set returning
arguments to a function, is now allowed. Not because it's particularly
desirable, but because it ends up working and there seems to be no argument
for adding code to prohibit it.
Currently the behavior for COALESCE and CASE containing SRFs has changed,
returning multiple rows from the expression, even when the SRF containing
"arm" of the expression is not evaluated. That's because the SRFs are
evaluated in a separate ProjectSet node. As that's quite confusing, we're
likely to instead prohibit SRFs in those places. But that's still being
discussed, and the code would reside in places not touched here, so that's
a task for later.
There's a lot of, now superfluous, code dealing with set return expressions
around. But as the changes to get rid of those are verbose largely boring,
it seems better for readability to keep the cleanup as a separate commit.
Author: Tom Lane and Andres Freund
Discussion: https://postgr.es/m/20160822214023.aaxz5l4igypowyri@alap3.anarazel.de
In an RLS query, we must ensure that security filter quals are evaluated
before ordinary query quals, in case the latter contain "leaky" functions
that could expose the contents of sensitive rows. The original
implementation of RLS planning ensured this by pushing the scan of a
secured table into a sub-query that it marked as a security-barrier view.
Unfortunately this results in very inefficient plans in many cases, because
the sub-query cannot be flattened and gets planned independently of the
rest of the query.
To fix, drop the use of sub-queries to enforce RLS qual order, and instead
mark each qual (RestrictInfo) with a security_level field establishing its
priority for evaluation. Quals must be evaluated in security_level order,
except that "leakproof" quals can be allowed to go ahead of quals of lower
security_level, if it's helpful to do so. This has to be enforced within
the ordering of any one list of quals to be evaluated at a table scan node,
and we also have to ensure that quals are not chosen for early evaluation
(i.e., use as an index qual or TID scan qual) if they're not allowed to go
ahead of other quals at the scan node.
This is sufficient to fix the problem for RLS quals, since we only support
RLS policies on simple tables and thus RLS quals will always exist at the
table scan level only. Eventually these qual ordering rules should be
enforced for join quals as well, which would permit improving planning for
explicit security-barrier views; but that's a task for another patch.
Note that FDWs would need to be aware of these rules --- and not, for
example, send an insecure qual for remote execution --- but since we do
not yet allow RLS policies on foreign tables, the case doesn't arise.
This will need to be addressed before we can allow such policies.
Patch by me, reviewed by Stephen Frost and Dean Rasheed.
Discussion: https://postgr.es/m/8185.1477432701@sss.pgh.pa.us
Now that the upper planner uses paths, and now that we have proper hooks
to inject paths into the upper planning process, it's possible for
foreign data wrappers to arrange to push aggregates to the remote side
instead of fetching all of the rows and aggregating them locally. This
figures to be a massive win for performance, so teach postgres_fdw to
do it.
Jeevan Chalke and Ashutosh Bapat. Reviewed by Ashutosh Bapat with
additional testing by Prabhat Sahu. Various mostly cosmetic changes
by me.
ExecReScanAgg's check for whether it could re-use a previously calculated
hashtable neglected the possibility that the Agg node might reference
PARAM_EXEC Params that are not referenced by its input plan node. That's
okay if the Params are in upper tlist or qual expressions; but if one
appears in aggregate input expressions, then the hashtable contents need
to be recomputed when the Param's value changes.
To avoid unnecessary performance degradation in the case of a Param that
isn't within an aggregate input, add logic to the planner to determine
which Params are within aggregate inputs. This requires a new field in
struct Agg, but fortunately we never write plans to disk, so this isn't
an initdb-forcing change.
Per report from Jeevan Chalke. This has been broken since forever,
so back-patch to all supported branches.
Andrew Gierth, with minor adjustments by me
Report: <CAM2+6=VY8ykfLT5Q8vb9B6EbeBk-NGuLbT6seaQ+Fq4zXvrDcA@mail.gmail.com>
We must not push down a foreign join when the foreign tables involved
should be accessed under different user mappings. Previously we tried
to enforce that rule literally during planning, but that meant that the
resulting plans were dependent on the current contents of the
pg_user_mapping catalog, and we had to blow away all cached plans
containing any remote join when anything at all changed in pg_user_mapping.
This could have been improved somewhat, but the fact that a syscache inval
callback has very limited info about what changed made it hard to do better
within that design. Instead, let's change the planner to not consider user
mappings per se, but to allow a foreign join if both RTEs have the same
checkAsUser value. If they do, then they necessarily will use the same
user mapping at runtime, and we don't need to know specifically which one
that is. Post-plan-time changes in pg_user_mapping no longer require any
plan invalidation.
This rule does give up some optimization ability, to wit where two foreign
table references come from views with different owners or one's from a view
and one's directly in the query, but nonetheless the same user mapping
would have applied. We'll sacrifice the first case, but to not regress
more than we have to in the second case, allow a foreign join involving
both zero and nonzero checkAsUser values if the nonzero one is the same as
the prevailing effective userID. In that case, mark the plan as only
runnable by that userID.
The plancache code already had a notion of plans being userID-specific,
in order to support RLS. It was a little confused though, in particular
lacking clarity of thought as to whether it was the rewritten query or just
the finished plan that's dependent on the userID. Rearrange that code so
that it's clearer what depends on which, and so that the same logic applies
to both RLS-injected role dependency and foreign-join-injected role
dependency.
Note that this patch doesn't remove the other issue mentioned in the
original complaint, which is that while we'll reliably stop using a foreign
join if it's disallowed in a new context, we might fail to start using a
foreign join if it's now allowed, but we previously created a generic
cached plan that didn't use one. It was agreed that the chance of winning
that way was not high enough to justify the much larger number of plan
invalidations that would have to occur if we tried to cause it to happen.
In passing, clean up randomly-varying spelling of EXPLAIN commands in
postgres_fdw.sql, and fix a COSTS ON example that had been allowed to
leak into the committed tests.
This reverts most of commits fbe5a3fb7 and 5d4171d1c, which were the
previous attempt at ensuring we wouldn't push down foreign joins that
span permissions contexts.
Etsuro Fujita and Tom Lane
Discussion: <d49c1e5b-f059-20f4-c132-e9752ee0113e@lab.ntt.co.jp>
In commit 68fa28f77 I tried to teach SS_finalize_plan() to cope with
initPlans attached anywhere in the plan tree, by dint of moving its
handling of those into the recursion in finalize_plan(). It turns out that
that doesn't really work: if a lower-level plan node emits an initPlan
output parameter in its targetlist, it's legitimate for upper levels to
reference those Params --- and at the point where this code runs, those
references look just like the Param itself, so finalize_plan() quite
properly rejects them as being in the wrong place. We could lobotomize
the checks enough to allow that, probably, but then it's not clear that
we'd have any meaningful check for misplaced Params at all. What seems
better, at least in the near term, is to tweak standard_planner() a bit
so that initPlans are never placed anywhere but the topmost plan node
for a query level, restoring the behavior that occurred pre-9.6. Possibly
we can do better if this code is ever merged into setrefs.c: then it would
be possible to check a Param's placement only when we'd failed to replace
it with a Var referencing a child plan node's targetlist.
BTW, I'm now suspicious that finalize_plan is doing the wrong thing by
returning the node's allParam rather than extParam to be incorporated
in the parent node's set of used parameters. However, it makes no
difference given that initPlans only appear at top level, so I'll leave
that alone for now.
Another thing that emerged from this is that standard_planner() needs
to check for initPlans before deciding that it's safe to stick a Gather
node on top in force_parallel_mode mode. We previously guarded against
that by deciding the plan wasn't wholePlanParallelSafe if any subplans
had been found, but after commit 5ce5e4a12 it's necessary to have this
substitute test, because path parallel_safe markings don't account for
initPlans. (Normally, we'd have decided the paths weren't safe anyway
due to appearances of SubPlan nodes, Params, or CTE scans somewhere in
the tree --- but it's possible for those all to be optimized away while
initPlans still remain.)
Per fuzz testing by Andreas Seltenreich.
Report: <874m89rw7x.fsf@credativ.de>
Commit 3fc6e2d7f5b652b417fa6937c34de2438d60fa9f introduced new "upper"
RelOptInfo structures but didn't set consider_parallel for them
correctly, a point I completely missed when reviewing it. Later,
commit e06a38965b3bcdaa881e7e06892d4d8ab6c2c980 made the situation
worse by doing it incorrectly for the grouping relation. Try to
straighten all of that out. Along the way, get rid of the annoying
wholePlanParallelSafe flag, which was only necessarily because of
the fact that upper planning stages didn't use paths at the time
that code was written.
The most important immediate impact of these changes is that
force_parallel_mode will provide useful test coverage in quite a few
more scenarios than it did previously, but it's also necessary
preparation for fixing some problems related to subqueries.
Patch by me, reviewed by Tom Lane.
If we need to use a gating Result node for pseudoconstant quals,
create_scan_plan() intentionally suppresses use_physical_tlist's checks
on whether there are matches for sortgroupref labels, on the grounds that
we don't need matches because we can label the Result's projection output
properly. However, it then called apply_pathtarget_labeling_to_tlist
anyway. This oversight was harmless when written, but in commit aeb9ae645
I made that function throw an error if there was no match. Thus, the
combination of a table scan, pseudoconstant quals, and a non-simple-Var
sortgroupref column threw the dreaded "ORDER/GROUP BY expression not found
in targetlist" error. To fix, just skip applying the labeling in this
case. Per report from Rushabh Lathia.
Report: <CAGPqQf2iLB8t6t-XrL-zR233DFTXxEsfVZ4WSqaYfLupEoDxXA@mail.gmail.com>
The original coding had three separate booleans representing partial
aggregation behavior, which was confusing, unreadable, and error-prone,
not least because the booleans weren't always listed in the same order.
It was also inadequate for the allegedly-desirable future extension to
support intermediate partial aggregation, because we'd need separate
markers for serialization and deserialization in such a case.
Merge these bools into an enum "AggSplit" to provide symbolic names for
the supported operating modes (and document what those are). By assigning
the values of the enum constants carefully, we can treat AggSplit values
as options bitmasks so that tests of what to do aren't noticeably more
expensive than before.
While at it, get rid of Aggref.aggoutputtype. That's not needed since
commit 59a3795c2 got rid of setrefs.c's special-purpose Aggref comparison
code, and it likewise seemed more confusing than helpful.
Assorted comment cleanup as well (there's still more that I want to do
in that line).
catversion bump for change in Aggref node contents. Should be the last
one for partial-aggregation changes.
Discussion: <29309.1466699160@sss.pgh.pa.us>
The original upper-planner-pathification design (commit 3fc6e2d7f5b652b4)
assumed that we could always determine during Path formation whether or not
we would need a Result plan node to perform projection of a targetlist.
That turns out not to work very well, though, because createplan.c still
has some responsibilities for choosing the specific target list associated
with sorting/grouping nodes (in particular it might choose to add resjunk
columns for sorting). We might not ever refactor that --- doing so would
push more work into Path formation, which isn't attractive --- and we
certainly won't do so for 9.6. So, while create_projection_path and
apply_projection_to_path can tell for sure what will happen if the subpath
is projection-capable, they can't tell for sure when it isn't. This is at
least a latent bug in apply_projection_to_path, which might think it can
apply a target to a non-projecting node when the node will end up computing
something different.
Also, I'd tied the creation of a ProjectionPath node to whether or not a
Result is needed, but it turns out that we sometimes need a ProjectionPath
node anyway to avoid modifying a possibly-shared subpath node. Callers had
to use create_projection_path for such cases, and we added code to them
that knew about the potential omission of a Result node and attempted to
adjust the cost estimates for that. That was uncertainly correct and
definitely ugly/unmaintainable.
To fix, have create_projection_path explicitly check whether a Result
is needed and adjust its cost estimate accordingly, though it creates
a ProjectionPath in either case. apply_projection_to_path is now mostly
just an optimized version that can avoid creating an extra Path node when
the input is known to not be shared with any other live path. (There
is one case that create_projection_path doesn't handle, which is pushing
parallel-safe expressions below a Gather node. We could make it do that
by duplicating the GatherPath, but there seems no need as yet.)
create_projection_plan still has to recheck the tlist-match condition,
which means that if the matching situation does get changed by createplan.c
then we'll have made a slightly incorrect cost estimate. But there seems
no help for that in the near term, and I doubt it occurs often enough,
let alone would change planning decisions often enough, to be worth
stressing about.
I added a "dummypp" field to ProjectionPath to track whether
create_projection_path thinks a Result is needed. This is not really
necessary as-committed because create_projection_plan doesn't look at the
flag; but it seems like a good idea to remember what we thought when
forming the cost estimate, if only for debugging purposes.
In passing, get rid of the target_parallel parameter added to
apply_projection_to_path by commit 54f5c5150. I don't think that's a good
idea because it involves callers in what should be an internal decision,
and opens us up to missing optimization opportunities if callers think they
don't need to provide a valid flag, as most don't. For the moment, this
just costs us an extra has_parallel_hazard call when planning a Gather.
If that starts to look expensive, I think a better solution would be to
teach PathTarget to carry/cache knowledge of parallel-safety of its
contents.
This terminology provoked widespread complaints. So, instead, rename
the GUC max_parallel_degree to max_parallel_workers_per_gather
(leaving room for a possible future GUC max_parallel_workers that acts
as a system-wide limit), and rename the parallel_degree reloption to
parallel_workers. Rename structure members to match.
These changes create a dump/restore hazard for users of PostgreSQL
9.6beta1 who have set the reloption (or applied the GUC using ALTER
USER or ALTER DATABASE).
As part of upper planner pathification (commit 3fc6e2d7f5b652b4) I redid
createplan.c's approach to the physical-tlist optimization, in which scan
nodes are allowed to return exactly the underlying table's columns so as
to save doing a projection step at runtime. The logic was intentionally
more aggressive than before about applying the optimization, which is
generally a good thing, but Andres Freund found a case in which it got
too aggressive. Namely, if any column is referenced more than once in
the parent plan node's sorting or grouping column list, we can't optimize
because then that column would need to have more than one ressortgroupref
label, and we only have space for one.
Add logic to detect this situation in use_physical_tlist(), and also add
some error checking in apply_pathtarget_labeling_to_tlist(), which this
example proves was being overly cavalier about whether what it was doing
made any sense.
The added test case exposes the problem only because we do not eliminate
duplicate grouping keys. That might be something to fix someday, but it
doesn't seem like appropriate post-beta work.
Report: <20160526021235.w4nq7k3gnheg7vit@alap3.anarazel.de>
Previously, the planner would reject an index-only scan if any restriction
clause for its table used a column not available from the index, even
if that restriction clause would later be dropped from the plan entirely
because it's implied by the index's predicate. This is a fairly common
situation for partial indexes because predicates using columns not included
in the index are often the most useful kind of predicate, and we have to
duplicate (or at least imply) the predicate in the WHERE clause in order
to get the index to be considered at all. So index-only scans were
essentially unavailable with such partial indexes.
To fix, we have to do detection of implied-by-predicate clauses much
earlier in the planner. This patch puts it in check_index_predicates
(nee check_partial_indexes), meaning it gets done for every partial index,
whereas we previously only considered this issue at createplan time,
so that the work was only done for an index actually selected for use.
That could result in a noticeable planning slowdown for queries against
tables with many partial indexes. However, testing suggested that there
isn't really a significant cost, especially not with reasonable numbers
of partial indexes. We do get a small additional benefit, which is that
cost_index is more accurate since it correctly discounts the evaluation
cost of clauses that will be removed. We can also avoid considering such
clauses as potential indexquals, which saves useless matching cycles in
the case where the predicate columns aren't in the index, and prevents
generating bogus plans that double-count the clause's selectivity when
the columns are in the index.
Tomas Vondra and Kyotaro Horiguchi, reviewed by Kevin Grittner and
Konstantin Knizhnik, and whacked around a little by me
This is necessary infrastructure for supporting parallel aggregation
for aggregates whose transition type is "internal". Such values
can't be passed between cooperating processes, because they are
just pointers.
David Rowley, reviewed by Tomas Vondra and by me.
Per discussion, the new extensible node framework is thought to be
better designed than the custom path/scan/scanstate stuff we added
in PostgreSQL 9.5. Rework the latter to be more like the former.
This is not backward-compatible, but we generally don't promise that
for C APIs, and there probably aren't many people using this yet
anyway.
KaiGai Kohei, reviewed by Petr Jelinek and me. Some further
cosmetic changes by me.
Parallel workers can now partially aggregate the data and pass the
transition values back to the leader, which can combine the partial
results to produce the final answer.
David Rowley, based on earlier work by Haribabu Kommi. Reviewed by
Álvaro Herrera, Tomas Vondra, Amit Kapila, James Sewell, and me.
postgres_fdw can now sent an UPDATE or DELETE statement directly to
the foreign server in simple cases, rather than sending a SELECT FOR
UPDATE statement and then updating or deleting rows one-by-one.
Etsuro Fujita, reviewed by Rushabh Lathia, Shigeru Hanada, Kyotaro
Horiguchi, Albe Laurenz, Thom Brown, and me.
This means that, for example, "SELECT expensive_func(a) FROM bigtab
WHERE something" can compute expensive_func(a) in the workers rather
than the leader if it happens to be parallel-safe, which figures to be
a big win in some practical cases.
Currently, we can only do this if the entire target list is
parallel-safe. If we worked harder, we might be able to evaluate
parallel-safe targets in the worker and any parallel-restricted
targets in the leader, but that would be more complicated, and there
aren't that many parallel-restricted functions that people are likely
to use in queries anyway. I think. So just do the simple thing for
the moment.
Robert Haas, Amit Kapila, and Tom Lane
In commit 19a541143a09c067 I did not make PathTarget a subtype of Node,
and embedded a RelOptInfo's reltarget directly into it rather than having
a separately-allocated Node. In hindsight that was misguided
micro-optimization, enabled by the fact that at that point we didn't have
any Paths with custom PathTargets. Now that PathTarget processing has
been fleshed out some more, it's easier to see that it's better to have
PathTarget as an indepedent Node type, even if it does cost us one more
palloc to create a RelOptInfo. So change it while we still can.
This commit just changes the representation, without doing anything more
interesting than that.
