The patch needs test cases, reorganization, and cfbot testing.
Technically reverts commits 5c31afc49d..e35b2bad1a (exclusive/inclusive)
and 08db7c63f3..ccbe34139b.
Reported-by: Tom Lane, Michael Paquier
Discussion: https://postgr.es/m/E1ktAAG-0002V2-VB@gemulon.postgresql.org
This adds a key management system that stores (currently) two data
encryption keys of length 128, 192, or 256 bits. The data keys are
AES256 encrypted using a key encryption key, and validated via GCM
cipher mode. A command to obtain the key encryption key must be
specified at initdb time, and will be run at every database server
start. New parameters allow a file descriptor open to the terminal to
be passed. pg_upgrade support has also been added.
Discussion: https://postgr.es/m/CA+fd4k7q5o6Nc_AaX6BcYM9yqTbC6_pnH-6nSD=54Zp6NBQTCQ@mail.gmail.com
Discussion: https://postgr.es/m/20201202213814.GG20285@momjian.us
Author: Masahiko Sawada, me, Stephen Frost
The use of low-level hash routines is not recommended by upstream
OpenSSL since 2000, and pgcrypto already switched to EVP as of 5ff4a67.
This takes advantage of the refactoring done in 87ae969 that has
introduced the allocation and free routines for cryptographic hashes.
Since 1.1.0, OpenSSL does not publish the contents of the cryptohash
contexts, forcing any consumers to rely on OpenSSL for all allocations.
Hence, the resource owner callback mechanism gains a new set of routines
to track and free cryptohash contexts when using OpenSSL, preventing any
risks of leaks in the backend. Nothing is needed in the frontend thanks
to the refactoring of 87ae969, and the resowner knowledge is isolated
into cryptohash_openssl.c.
Note that this also fixes a failure with SCRAM authentication when using
FIPS in OpenSSL, but as there have been few complaints about this
problem and as this causes an ABI breakage, no backpatch is done.
Author: Michael Paquier
Reviewed-by: Daniel Gustafsson, Heikki Linnakangas
Discussion: https://postgr.es/m/20200924025314.GE7405@paquier.xyz
Discussion: https://postgr.es/m/20180911030250.GA27115@paquier.xyz
Two new routines to allocate a hash context and to free it are created,
as these become necessary for the goal behind this refactoring: switch
the all cryptohash implementations for OpenSSL to use EVP (for FIPS and
also because upstream does not recommend the use of low-level cryptohash
functions for 20 years). Note that OpenSSL hides the internals of
cryptohash contexts since 1.1.0, so it is necessary to leave the
allocation to OpenSSL itself, explaining the need for those two new
routines. This part is going to require more work to properly track
hash contexts with resource owners, but this not introduced here.
Still, this refactoring makes the move possible.
This reduces the number of routines for all SHA2 implementations from
twelve (SHA{224,256,386,512} with init, update and final calls) to five
(create, free, init, update and final calls) by incorporating the hash
type directly into the hash context data.
The new cryptohash routines are moved to a new file, called cryptohash.c
for the fallback implementations, with SHA2 specifics becoming a part
internal to src/common/. OpenSSL specifics are part of
cryptohash_openssl.c. This infrastructure is usable for more hash
types, like MD5 or HMAC.
Any code paths using the internal SHA2 routines are adapted to report
correctly errors, which are most of the changes of this commit. The
zones mostly impacted are checksum manifests, libpq and SCRAM.
Note that e21cbb4 was a first attempt to switch SHA2 to EVP, but it
lacked the refactoring needed for libpq, as done here.
This patch has been tested on Linux and Windows, with and without
OpenSSL, and down to 1.0.1, the oldest version supported on HEAD.
Author: Michael Paquier
Reviewed-by: Daniel Gustafsson
Discussion: https://postgr.es/m/20200924025314.GE7405@paquier.xyz
Don't use fread(), since that doesn't necessarily set errno. We could
use read() instead, but it's even better to use pg_pread(), which
allows us to avoid some extra calls to seek to the desired location in
the file.
Also, advertise a wait event while reading from a file, as we do for
most other places where we're reading data from files.
Patch by me, reviewed by Hamid Akhtar.
Discussion: http://postgr.es/m/CA+TgmobBw-3573vMosGj06r72ajHsYeKtksT_oTxH8XvTL7DxA@mail.gmail.com
Merge two calls to sendDir() that are exactly the same except for
the fifth argument. Adjust comments to match.
Also, don't bother checking whether tblspc_map_file is NULL. We
initialize it in all cases, so it can't be.
Patch by me, reviewed by Amit Kapila and Kyotaro Horiguchi.
Discussion: http://postgr.es/m/CA+TgmoYq+59SJ2zBbP891ngWPA9fymOqntqYcweSDYXS2a620A@mail.gmail.com
Commit 72d422a5227ef6f76f412486a395aba9f53bf3f0 made xlog.c call
sendTablespace() with the 'sizeonly' argument set to true, which
required basebackup.c to export sendTablespace(). However, that's
kind of ugly, so instead defer the call to sendTablespace() until
basebackup.c regains control. That way, it can still be a static
function.
Patch by me, reviewed by Amit Kapila and Kyotaro Horiguchi.
Discussion: http://postgr.es/m/CA+TgmoYq+59SJ2zBbP891ngWPA9fymOqntqYcweSDYXS2a620A@mail.gmail.com
Introduce TAR_BLOCK_SIZE and replace many instances of 512 with
the new constant. Introduce function tarPaddingBytesRequired
and use it to replace numerous repetitions of (x + 511) & ~511.
Add preprocessor guards against multiple inclusion to pgtar.h.
Reformat the prototype for tarCreateHeader so it doesn't extend
beyond 80 characters.
Discussion: http://postgr.es/m/CA+TgmobWbfReO9-XFk8urR1K4wTNwqoHx_v56t7=T8KaiEoKNw@mail.gmail.com
Originally, the names assigned to SLRUs had no purpose other than
being shmem lookup keys, so not a lot of thought went into them.
As of v13, though, we're exposing them in the pg_stat_slru view and
the pg_stat_reset_slru function, so it seems advisable to take a bit
more care. Rename them to names based on the associated on-disk
storage directories (which fortunately we *did* think about, to some
extent; since those are also visible to DBAs, consistency seems like
a good thing). Also rename the associated LWLocks, since those names
are likewise user-exposed now as wait event names.
For the most part I only touched symbols used in the respective modules'
SimpleLruInit() calls, not the names of other related objects. This
renaming could have been taken further, and maybe someday we will do so.
But for now it seems undesirable to change the names of any globally
visible functions or structs, so some inconsistency is unavoidable.
(But I *did* terminate "oldserxid" with prejudice, as I found that
name both unreadable and not descriptive of the SLRU's contents.)
Table 27.12 needs re-alphabetization now, but I'll leave that till
after the other LWLock renamings I have in mind.
Discussion: https://postgr.es/m/28683.1589405363@sss.pgh.pa.us
Function names declared "extern" now use BackupManifest in the name
rather than just Manifest, and data types use backup_manifest
rather than just manifest.
Per note from Michael Paquier.
Discussion: http://postgr.es/m/20200418125713.GG350229@paquier.xyz
If there is already a backup_manifest file in the database cluster,
it belongs to the past backup that was used to start this server.
It is not correct for the backup being taken now. So this commit
changes pg_basebackup so that it always skips such backup_manifest
file. The backup_manifest file for the current backup will be injected
separately if users want it.
Author: Fujii Masao
Reviewed-by: Robert Haas
Discussion: https://postgr.es/m/78f76a3d-1a28-a97d-0394-5c96985dd1c0@oss.nttdata.com
lapwing is complaining that about a call to pg_gmtime, saying that
it "expected 'const pg_time_t *' but argument is of type 'time_t *'".
I at first thought that the problem had someting to do with const,
but Thomas Munro suggested that it might be just because time_t
and pg_time_t are different identifers. lapwing is i686 rather than
x86_64, and pg_time_t is always int64, so that seems like a good
guess.
There is other code that just casts time_t to pg_time_t without
any conversion function, so try that approach here.
Introduced in commit 0d8c9c1210c44b36ec2efcb223a1dfbe897a3661.
A manifest is a JSON document which includes (1) the file name, size,
last modification time, and an optional checksum for each file backed
up, (2) timelines and LSNs for whatever WAL will need to be replayed
to make the backup consistent, and (3) a checksum for the manifest
itself. By default, we use CRC-32C when checksumming data files,
because we are trying to detect corruption and user error, not foil an
adversary. However, pg_basebackup and the server-side BASE_BACKUP
command now have options to select a different algorithm, so users
wanting a cryptographic hash function can select SHA-224, SHA-256,
SHA-384, or SHA-512. Users not wanting file checksums at all can
disable them, or disable generating of the backup manifest altogether.
Using a cryptographic hash function in place of CRC-32C consumes
significantly more CPU cycles, which may slow down backups in some
cases.
A new tool called pg_validatebackup can validate a backup against the
manifest. If no checksums are present, it can still check that the
right files exist and that they have the expected sizes. If checksums
are present, it can also verify that each file has the expected
checksum. Additionally, it calls pg_waldump to verify that the
expected WAL files are present and parseable. Only plain format
backups can be validated directly, but tar format backups can be
validated after extracting them.
Robert Haas, with help, ideas, review, and testing from David Steele,
Stephen Frost, Andrew Dunstan, Rushabh Lathia, Suraj Kharage, Tushar
Ahuja, Rajkumar Raghuwanshi, Mark Dilger, Davinder Singh, Jeevan
Chalke, Amit Kapila, Andres Freund, and Noah Misch.
Discussion: http://postgr.es/m/CA+TgmoZV8dw1H2bzZ9xkKwdrk8+XYa+DC9H=F7heO2zna5T6qg@mail.gmail.com
Previously 0 was reported in pg_stat_progress_basebackup.total_backup
if the total backup size was not estimated. Per discussion, our consensus
is that NULL is better choise as the value in total_backup in that case.
So this commit makes pg_stat_progress_basebackup view report NULL
in total_backup column if the estimation is disabled.
Bump catversion.
Author: Fujii Masao
Reviewed-by: Amit Langote, Magnus Hagander, Alvaro Herrera
Discussion: https://postgr.es/m/CABUevExnhOD89zBDuPvfAAh243RzNpwCPEWNLtMYpKHMB8gbAQ@mail.gmail.com
The init_ps_display() arguments were mostly lies by now, so to match
typical usage, just use one argument and let the caller assemble it
from multiple sources if necessary. The only user of the additional
arguments is BackendInitialize(), which was already doing string
assembly on the caller side anyway.
Remove the second argument of set_ps_display() ("force") and just
handle that in init_ps_display() internally.
BackendInitialize() also used to set the initial status as
"authentication", but that was very far from where authentication
actually happened. So now it's set to "initializing" and then
"authentication" just before the actual call to
ClientAuthentication().
Reviewed-by: Julien Rouhaud <rjuju123@gmail.com>
Reviewed-by: Kuntal Ghosh <kuntalghosh.2007@gmail.com>
Reviewed-by: Alvaro Herrera <alvherre@2ndquadrant.com>
Discussion: https://www.postgresql.org/message-id/flat/c65e5196-4f04-4ead-9353-6088c19615a3@2ndquadrant.com
This commit adds pg_stat_progress_basebackup view that reports
the progress while an application like pg_basebackup is taking
a base backup. This uses the progress reporting infrastructure
added by c16dc1aca5e0, adding support for streaming base backup.
Bump catversion.
Author: Fujii Masao
Reviewed-by: Kyotaro Horiguchi, Amit Langote, Sergei Kornilov
Discussion: https://postgr.es/m/9ed8b801-8215-1f3d-62d7-65bff53f6e94@oss.nttdata.com
An instance of PostgreSQL crashing with a bad timing could leave behind
temporary pg_internal.init files, potentially causing failures when
verifying checksums. As the same exclusion lists are used between
pg_rewind, pg_checksums and basebackup.c, all those tools are extended
with prefix checks to keep everything in sync, with dedicated checks
added for pg_internal.init.
Backpatch down to 11, where pg_checksums (pg_verify_checksums in 11) and
checksum verification for base backups have been introduced.
Reported-by: Michael Banck
Author: Michael Paquier
Reviewed-by: Kyotaro Horiguchi, David Steele
Discussion: https://postgr.es/m/62031974fd8e941dd8351fbc8c7eff60d59c5338.camel@credativ.de
Backpatch-through: 11
The use of pg_atoi() for parsing a string into an Oid fails for values
larger than INT32_MAX, since OIDs are unsigned. Instead, use
atooid(). While this has less error checking, the contents of the
data directory are expected to be trustworthy, so we don't need to go
out of our way to do full error checking.
Discussion: https://www.postgresql.org/message-id/flat/dea47fc8-6c89-a2b1-07e3-754ff1ab094b%402ndquadrant.com
The previous coding imagined that it could call before_shmem_exit()
when a non-exclusive backup began and then remove the previously-added
handler by calling cancel_before_shmem_exit() when that backup
ended. However, this only works provided that nothing else in the
system has registered a before_shmem_exit() hook in the interim,
because cancel_before_shmem_exit() is documented to remove a callback
only if it is the latest callback registered. It also only works
if nothing can ERROR out between the time that sessionBackupState
is reset and the time that cancel_before_shmem_exit(), which doesn't
seem to be strictly true.
To fix, leave the handler installed for the lifetime of the session,
arrange to install it just once, and teach it to quietly do nothing if
there isn't a non-exclusive backup in process.
This is a bug, but for now I'm not going to back-patch, because the
consequences are minor. It's possible to cause a spurious warning
to be generated, but that doesn't really matter. It's also possible
to trigger an assertion failure, but production builds shouldn't
have assertions enabled.
Patch by me, reviewed by Kyotaro Horiguchi, Michael Paquier (who
preferred a different approach, but got outvoted), Fujii Masao,
and Tom Lane, and with comments by various others.
Discussion: http://postgr.es/m/CA+TgmobMjnyBfNhGTKQEDbqXYE3_rXWpc4CM63fhyerNCes3mA@mail.gmail.com
Similar to commits 7e735035f2 and dddf4cdc33, this commit makes the order
of header file inclusion consistent for backend modules.
In the passing, removed a couple of duplicate inclusions.
Author: Vignesh C
Reviewed-by: Kuntal Ghosh and Amit Kapila
Discussion: https://postgr.es/m/CALDaNm2Sznv8RR6Ex-iJO6xAdsxgWhCoETkaYX=+9DW3q0QCfA@mail.gmail.com
The old code didn't differentiate between a read error and a
concurrent truncation. fread reports both of these by returning 0;
you have to use feof() or ferror() to distinguish between them,
which this code did not do.
It might be a better idea to use read() rather than fread() here,
so that we can display a less-generic error message, but I'm not
sure that would qualify as a back-patchable bug fix, so just do
this much for now.
Jeevan Chalke, reviewed by Jeevan Ladhe and by me.
Discussion: http://postgr.es/m/CA+TgmobG4ywMzL5oQq2a8YKp8x2p3p1LOMMcGqpS7aekT9+ETA@mail.gmail.com
In the wake of commit 1cff1b95a, the obvious way to sort a List
is to apply qsort() directly to the array of ListCells. list_qsort
was building an intermediate array of pointers-to-ListCells, which
we no longer need, but getting rid of it forces an API change:
the comparator functions need to do one less level of indirection.
Since we're having to touch the callers anyway, let's do two additional
changes: sort the given list in-place rather than making a copy (as
none of the existing callers have any use for the copying behavior),
and rename list_qsort to list_sort. It was argued that the old name
exposes more about the implementation than it should, which I find
pretty questionable, but a better reason to rename it is to be sure
we get the attention of any external callers about the need to fix
their comparator functions.
While we're at it, change four existing callers of qsort() to use
list_sort instead; previously, they all had local reinventions
of list_qsort, ie build-an-array-from-a-List-and-qsort-it.
(There are some other places where changing to list_sort perhaps
would be worthwhile, but they're less obviously wins.)
Discussion: https://postgr.es/m/29361.1563220190@sss.pgh.pa.us
Originally, Postgres Lists were a more or less exact reimplementation of
Lisp lists, which consist of chains of separately-allocated cons cells,
each having a value and a next-cell link. We'd hacked that once before
(commit d0b4399d8) to add a separate List header, but the data was still
in cons cells. That makes some operations -- notably list_nth() -- O(N),
and it's bulky because of the next-cell pointers and per-cell palloc
overhead, and it's very cache-unfriendly if the cons cells end up
scattered around rather than being adjacent.
In this rewrite, we still have List headers, but the data is in a
resizable array of values, with no next-cell links. Now we need at
most two palloc's per List, and often only one, since we can allocate
some values in the same palloc call as the List header. (Of course,
extending an existing List may require repalloc's to enlarge the array.
But this involves just O(log N) allocations not O(N).)
Of course this is not without downsides. The key difficulty is that
addition or deletion of a list entry may now cause other entries to
move, which it did not before.
For example, that breaks foreach() and sister macros, which historically
used a pointer to the current cons-cell as loop state. We can repair
those macros transparently by making their actual loop state be an
integer list index; the exposed "ListCell *" pointer is no longer state
carried across loop iterations, but is just a derived value. (In
practice, modern compilers can optimize things back to having just one
loop state value, at least for simple cases with inline loop bodies.)
In principle, this is a semantics change for cases where the loop body
inserts or deletes list entries ahead of the current loop index; but
I found no such cases in the Postgres code.
The change is not at all transparent for code that doesn't use foreach()
but chases lists "by hand" using lnext(). The largest share of such
code in the backend is in loops that were maintaining "prev" and "next"
variables in addition to the current-cell pointer, in order to delete
list cells efficiently using list_delete_cell(). However, we no longer
need a previous-cell pointer to delete a list cell efficiently. Keeping
a next-cell pointer doesn't work, as explained above, but we can improve
matters by changing such code to use a regular foreach() loop and then
using the new macro foreach_delete_current() to delete the current cell.
(This macro knows how to update the associated foreach loop's state so
that no cells will be missed in the traversal.)
There remains a nontrivial risk of code assuming that a ListCell *
pointer will remain good over an operation that could now move the list
contents. To help catch such errors, list.c can be compiled with a new
define symbol DEBUG_LIST_MEMORY_USAGE that forcibly moves list contents
whenever that could possibly happen. This makes list operations
significantly more expensive so it's not normally turned on (though it
is on by default if USE_VALGRIND is on).
There are two notable API differences from the previous code:
* lnext() now requires the List's header pointer in addition to the
current cell's address.
* list_delete_cell() no longer requires a previous-cell argument.
These changes are somewhat unfortunate, but on the other hand code using
either function needs inspection to see if it is assuming anything
it shouldn't, so it's not all bad.
Programmers should be aware of these significant performance changes:
* list_nth() and related functions are now O(1); so there's no
major access-speed difference between a list and an array.
* Inserting or deleting a list element now takes time proportional to
the distance to the end of the list, due to moving the array elements.
(However, it typically *doesn't* require palloc or pfree, so except in
long lists it's probably still faster than before.) Notably, lcons()
used to be about the same cost as lappend(), but that's no longer true
if the list is long. Code that uses lcons() and list_delete_first()
to maintain a stack might usefully be rewritten to push and pop at the
end of the list rather than the beginning.
* There are now list_insert_nth...() and list_delete_nth...() functions
that add or remove a list cell identified by index. These have the
data-movement penalty explained above, but there's no search penalty.
* list_concat() and variants now copy the second list's data into
storage belonging to the first list, so there is no longer any
sharing of cells between the input lists. The second argument is
now declared "const List *" to reflect that it isn't changed.
This patch just does the minimum needed to get the new implementation
in place and fix bugs exposed by the regression tests. As suggested
by the foregoing, there's a fair amount of followup work remaining to
do.
Also, the ENABLE_LIST_COMPAT macros are finally removed in this
commit. Code using those should have been gone a dozen years ago.
Patch by me; thanks to David Rowley, Jesper Pedersen, and others
for review.
Discussion: https://postgr.es/m/11587.1550975080@sss.pgh.pa.us
This addresses a couple of issues in the code:
- Typos and inconsistencies in comments and function declarations.
- Removal of unreferenced function declarations.
- Removal of unnecessary compile flags.
- A cleanup error in regressplans.sh.
Author: Alexander Lakhin
Discussion: https://postgr.es/m/0c991fdf-2670-1997-c027-772a420c4604@gmail.com
Because there is no portable int64/uint64 format specifier and we
can't stick macros like INT64_FORMAT into the middle of a translatable
string, we have been using various workarounds that put the number to
be printed into a string buffer first. Now that we always use our own
sprintf(), we can rely on %lld and %llu to work, so we can use those.
This patch undoes this workaround in a few places where it was
egregiously verbose.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/CAH2-Wz%3DWbNxc5ob5NJ9yqo2RMJ0q4HXDS30GVCobeCvC9A1L9A%40mail.gmail.com
This adds a row to the pg_stat_database view with datoid 0 and datname
NULL for those objects that are not in a database. This was added
particularly for checksums, but we were already tracking more satistics
for these objects, just not returning it.
Also add a checksum_last_failure column that holds the timestamptz of
the last checksum failure that occurred in a database (or in a
non-dataabase file), if any.
Author: Julien Rouhaud <rjuju123@gmail.com>
The current tool name is too restrictive and focuses only on verifying
checksums. As more options to control checksums for an offline cluster
are planned to be added, switch to a more generic name. Documentation
as well as all past references to the tool are updated.
Author: Michael Paquier
Reviewed-by: Michael Banck, Fabien Coelho, Seigei Kornilov
Discussion: https://postgr.es/m/20181221201616.GD4974@nighthawk.caipicrew.dd-dns.de
This adds a column that counts how many checksum failures have occurred
on files belonging to a specific database. Both checksum failures
during normal backend processing and those created when a base backup
detects a checksum failure are counted.
Author: Magnus Hagander
Reviewed by: Julien Rouhaud
Three issues are fixed in this patch:
- Base backups forgot to ignore files specific to EXEC_BACKEND, leading
to spurious warnings when checksums are enabled, per analysis from me.
- pg_verify_checksums forgot about files specific to EXEC_BACKEND,
leading to failures of the tool on any such build, particularly Windows.
This error was originally found by newly-introduced TAP tests in various
buildfarm members using EXEC_BACKEND.
- pg_verify_checksums forgot to count for temporary files and temporary
paths, which could be valid relation files, without checksums, per
report from Andres Freund. More tests are added to cover this case.
A new test case which emulates corruption for a file in a different
tablespace is added, coming from from Michael Banck, while I have coded
the main code and refactored the test code.
Author: Michael Banck, Michael Paquier
Reviewed-by: Stephen Frost, David Steele
Discussion: https://postgr.es/m/20181021134206.GA14282@paquier.xyz
Users of the WaitEventSet and WaitLatch() APIs can now choose between
asking for WL_POSTMASTER_DEATH and then handling it explicitly, or asking
for WL_EXIT_ON_PM_DEATH to trigger immediate exit on postmaster death.
This reduces code duplication, since almost all callers want the latter.
Repair all code that was previously ignoring postmaster death completely,
or requesting the event but ignoring it, or requesting the event but then
doing an unconditional PostmasterIsAlive() call every time through its
event loop (which is an expensive syscall on platforms for which we don't
have USE_POSTMASTER_DEATH_SIGNAL support).
Assert that callers of WaitLatchXXX() under the postmaster remember to
ask for either WL_POSTMASTER_DEATH or WL_EXIT_ON_PM_DEATH, to prevent
future bugs.
The only process that doesn't handle postmaster death is syslogger. It
waits until all backends holding the write end of the syslog pipe
(including the postmaster) have closed it by exiting, to be sure to
capture any parting messages. By using the WaitEventSet API directly
it avoids the new assertion, and as a by-product it may be slightly
more efficient on platforms that have epoll().
Author: Thomas Munro
Reviewed-by: Kyotaro Horiguchi, Heikki Linnakangas, Tom Lane
Discussion: https://postgr.es/m/CAEepm%3D1TCviRykkUb69ppWLr_V697rzd1j3eZsRMmbXvETfqbQ%40mail.gmail.com,
https://postgr.es/m/CAEepm=2LqHzizbe7muD7-2yHUbTOoF7Q+qkSD5Q41kuhttRTwA@mail.gmail.com
This allows the compiler / linker to mark affected pages as read-only.
There's other cases, but they're a bit more invasive, and should go
through some review. These are easy.
They were found with
objdump -j .data -t src/backend/postgres|awk '{print $4, $5, $6}'|sort -r|less
Discussion: https://postgr.es/m/20181015200754.7y7zfuzsoux2c4ya@alap3.anarazel.de
This makes a bit less work for translators, by unifying error strings a
bit more with what the rest of the code does, this time for three error
strings in autoprewarm and one in base backup code.
After some code review of slot.c, some file-access errcodes are reported
but lead to an incorrect internal error, while corrupted data makes the
most sense, similarly to the previous work done in e41d0a1. Also,
after calling rmtree(), a WARNING gets reported, which is a duplicate of
what the internal call report, so make the code more consistent with all
other code paths calling this function.
Author: Michael Paquier
Discussion: https://postgr.es/m/20180902200747.GC1343@paquier.xyz
System calls mixed up in error code paths are causing two issues which
several code paths have not correctly handled:
1) For write() calls, sometimes the system may return less bytes than
what has been written without errno being set. Some paths were careful
enough to consider that case, and assumed that errno should be set to
ENOSPC, other calls missed that.
2) errno generated by a system call is overwritten by other system calls
which may succeed once an error code path is taken, causing what is
reported to the user to be incorrect.
This patch uses the brute-force approach of correcting all those code
paths. Some refactoring could happen in the future, but this is let as
future work, which is not targeted for back-branches anyway.
Author: Michael Paquier
Reviewed-by: Ashutosh Sharma
Discussion: https://postgr.es/m/20180622061535.GD5215@paquier.xyz
Teach both base backups and pg_verify_checksums that if a page is new,
it does not have a checksum yet, so it shouldn't be verified.
Noted by Tomas Vondra, review by David Steele.
In commit 9c0a0de4c, I'd failed to notice that catalog/catalog.h
should also be considered a frontend-unsafe header, because it includes
(and needs) the full form of pg_class.h, not to mention relcache.h.
However, various frontend code was depending on it to get
TABLESPACE_VERSION_DIRECTORY, so refactoring of some sort is called for.
The cleanest answer seems to be to move TABLESPACE_VERSION_DIRECTORY,
as well as the OIDCHARS symbol, to common/relpath.h. Do that, and mop up
inclusions as necessary. (I found that quite a few current users of
catalog/catalog.h don't seem to need it at all anymore, apparently as a
result of the refactorings that created common/relpath.[hc]. And
initdb.c needed it only as a route to pg_class_d.h.)
Discussion: https://postgr.es/m/6629.1523294509@sss.pgh.pa.us
This reverts the backend sides of commit 1fde38beaa0c3e66c340efc7cc0dc272d6254bb0.
I have, at least for now, left the pg_verify_checksums tool in place, as
this tool can be very valuable without the rest of the patch as well,
and since it's a read-only tool that only runs when the cluster is down
it should be a lot safer.
