If ANALYZE found no repeated non-null entries in its sample, it set the
column's stadistinct value to -1.0, intending to indicate that the entries
are all distinct. But what this value actually means is that the number
of distinct values is 100% of the table's rowcount, and thus it was
overestimating the number of distinct values by however many nulls there
are. This could lead to very poor selectivity estimates, as for example
in a recent report from Andreas Joseph Krogh. We should discount the
stadistinct value by whatever we've estimated the nulls fraction to be.
(That is what will happen if we choose to use a negative stadistinct for
a column that does have repeated entries, so this code path was just
inconsistent.)
In addition to fixing the stadistinct entries stored by several different
ANALYZE code paths, adjust the logic where get_variable_numdistinct()
forces an "all distinct" estimate on the basis of finding a relevant unique
index. Unique indexes don't reject nulls, so there's no reason to assume
that the null fraction doesn't apply.
Back-patch to all supported branches. Back-patching is a bit of a judgment
call, but this problem seems to affect only a few users (else we'd have
identified it long ago), and it's bad enough when it does happen that
destabilizing plan choices in a worse direction seems unlikely.
Patch by me, with documentation wording suggested by Dean Rasheed
Report: <VisenaEmail.26.df42f82acae38a58.156463942b8@tc7-visena>
Discussion: <16143.1470350371@sss.pgh.pa.us>
Beginning with the next development cycle, PG servers will report two-part
not three-part version numbers. Fix libpq so that it will compute the
correct numeric representation of such server versions for reporting by
PQserverVersion(). It's desirable to get this into the field and
back-patched ASAP, so that older clients are more likely to understand the
new server version numbering by the time any such servers are in the wild.
(The results with an old client would probably not be catastrophic anyway
for a released server; for example "10.1" would be interpreted as 100100
which would be wrong in detail but would not likely cause an old client to
misbehave badly. But "10devel" or "10beta1" would result in sversion==0
which at best would result in disabling all use of modern features.)
Extracted from a patch by Peter Eisentraut; comments added by me
Patch: <802ec140-635d-ad86-5fdf-d3af0e260c22@2ndquadrant.com>
DST law changes in Kemerovo and Novosibirsk. Historical corrections for
Azerbaijan, Belarus, and Morocco. Asia/Novokuznetsk and Asia/Novosibirsk
now use numeric time zone abbreviations instead of invented ones. Zones
for Antarctic bases and other locations that have been uninhabited for
portions of the time span known to the tzdata database now report "-00"
rather than "zzz" as the zone abbreviation for those time spans.
Also, I decided to remove some of the timezone/data/ files that we don't
use. At one time that subdirectory was a complete copy of what IANA
distributes in the tzdata tarballs, but that hasn't been true for a long
time. There seems no good reason to keep shipping those specific files
but not others; they're just bloating our tarballs.
Since -c plus -C requests dropping and recreating the target database
as a whole, not dropping individual objects in it, we should assume that
the public schema already exists and need not be created. The previous
coding considered only the state of the -c option, so it would emit
"CREATE SCHEMA public" anyway, leading to an unexpected error in restore.
Back-patch to 9.2. Older versions did not accept -c with -C so the
issue doesn't arise there. (The logic being patched here dates to 8.0,
cf commit 2193121fa, so it's not really wrong that it didn't consider
the case at the time.)
Note that versions before 9.6 will still attempt to emit REVOKE/GRANT
on the public schema; but that happens without -c/-C too, and doesn't
seem to be the focus of this complaint. I considered extending this
stanza to also skip the public schema's ACL, but that would be a
misfeature, as it'd break cases where users intentionally changed that
ACL. The real fix for this aspect is Stephen Frost's work to not dump
built-in ACLs, and that's not going to get back-ported.
Per bugs #13804 and #14271. Solution found by David Johnston and later
rediscovered by me.
Report: <20151207163520.2628.95990@wrigleys.postgresql.org>
Report: <20160801021955.1430.47434@wrigleys.postgresql.org>
The help message for pg_basebackup specifies that the numbers 0 through 9
are accepted as valid values of -Z option. But, previously -Z 0 was rejected
as an invalid compression level.
Per discussion, it's better to make pg_basebackup treat 0 as valid
compression level meaning no compression, like pg_dump.
Back-patch to all supported versions.
Reported-By: Jeff Janes
Reviewed-By: Amit Kapila
Discussion: CAMkU=1x+GwjSayc57v6w87ij6iRGFWt=hVfM0B64b1_bPVKRqg@mail.gmail.com
This text was added by commit ff213239c, and not long thereafter obsoleted
by commit 4adc2f72a (which made the test depend on NBuffers instead); but
nobody noticed the need for an update. Commit 9563d5b5e adds some further
dependency on maintenance_work_mem, but the existing verbiage seems to
cover that with about as much precision as we really want here. Let's
just take it all out rather than leaving ourselves open to more errors of
omission in future. (That solution makes this change back-patchable, too.)
Noted by Peter Geoghegan.
Discussion: <CAM3SWZRVANbj9GA9j40fAwheQCZQtSwqTN1GBTVwRrRbmSf7cg@mail.gmail.com>
Per the fgets() specification, it cannot return without reading some data
unless it reports EOF or error. So the code here assumed that the data
buffer would necessarily be nonempty when we go to check for a newline
having been read. However, Agostino Sarubbo noticed that this could fail
to be true if the first byte of the data is a NUL (\0). The fgets() API
doesn't really work for embedded NULs, which is something I don't feel
any great need for us to worry about since we generally don't allow NULs
in SQL strings anyway. But we should not access off the end of our own
buffer if the case occurs. Normally this would just be a harmless read,
but if you were unlucky the byte before the buffer would contain '\n'
and we'd overwrite it with '\0', and if you were really unlucky that
might be valuable data and psql would crash.
Agostino reported this to pgsql-security, but after discussion we concluded
that it isn't worth treating as a security bug; if you can control the
input to psql you can do far more interesting things than just maybe-crash
it. Nonetheless, it is a bug, so back-patch to all supported versions.
Commits 4452000f3 et al established semantics for NullTest.argisrow that
are a bit different from its initial conception: rather than being merely
a cache of whether we've determined the input to have composite type,
the flag now has the further meaning that we should apply field-by-field
testing as per the standard's definition of IS [NOT] NULL. If argisrow
is false and yet the input has composite type, the construct instead has
the semantics of IS [NOT] DISTINCT FROM NULL. Update the comments in
primnodes.h to clarify this, and fix ruleutils.c and deparse.c to print
such cases correctly. In the case of ruleutils.c, this merely results in
cosmetic changes in EXPLAIN output, since the case can't currently arise
in stored rules. However, it represents a live bug for deparse.c, which
would formerly have sent a remote query that had semantics different
from the local behavior. (From the user's standpoint, this means that
testing a remote nested-composite column for null-ness could have had
unexpected recursive behavior much like that fixed in 4452000f3.)
In a related but somewhat independent fix, make plancat.c set argisrow
to false in all NullTest expressions constructed to represent "attnotnull"
constructs. Since attnotnull is actually enforced as a simple null-value
check, this is a more accurate representation of the semantics; we were
previously overpromising what it meant for composite columns, which might
possibly lead to incorrect planner optimizations. (It seems that what the
SQL spec expects a NOT NULL constraint to mean is an IS NOT NULL test, so
arguably we are violating the spec and should fix attnotnull to do the
other thing. If we ever do, this part should get reverted.)
Back-patch, same as the previous commit.
Discussion: <10682.1469566308@sss.pgh.pa.us>
The docs failed to explain that LIKE INCLUDING INDEXES would not preserve
the names of indexes and associated constraints. Also, it wasn't mentioned
that EXCLUDE constraints would be copied by this option. The latter
oversight seems enough of a documentation bug to justify back-patching.
In passing, do some minor copy-editing in the same area, and add an entry
for LIKE under "Compatibility", since it's not exactly a faithful
implementation of the standard's feature.
Discussion: <20160728151154.AABE64016B@smtp.hushmail.com>
start_postmaster() registered stop_postmaster_atexit as an atexit(3)
callback each time through, although the obvious intention was to do
so only once per program run. The extra registrations were harmless,
so long as we didn't exceed ATEXIT_MAX, but still it's a bug.
Artur Zakirov, with bikeshedding by Kyotaro Horiguchi and me
Discussion: <d279e817-02b5-caa6-215f-cfb05dce109a@postgrespro.ru>
The description of udt_privileges view contained an incorrect copy-pasted word.
Back-patch to 9.2 where udt_privileges view was added.
Author: Alexander Law
The SQL standard appears to specify that IS [NOT] NULL's tests of field
nullness are non-recursive, ie, we shouldn't consider that a composite
field with value ROW(NULL,NULL) is null for this purpose.
ExecEvalNullTest got this right, but eval_const_expressions did not,
leading to weird inconsistencies depending on whether the expression
was such that the planner could apply constant folding.
Also, adjust the docs to mention that IS [NOT] DISTINCT FROM NULL can be
used as a substitute test if a simple null check is wanted for a rowtype
argument. That motivated reordering things so that IS [NOT] DISTINCT FROM
is described before IS [NOT] NULL. In HEAD, I went a bit further and added
a table showing all the comparison-related predicates.
Per bug #14235. Back-patch to all supported branches, since it's certainly
undesirable that constant-folding should change the semantics.
Report and patch by Andrew Gierth; assorted wordsmithing and revised
regression test cases by me.
Report: <20160708024746.1410.57282@wrigleys.postgresql.org>
In btree_gin and citext, avoid some not-particularly-interesting
dependencies on the sorting of 'aa'. In tsearch2, use COLLATE "C" to
remove an uninteresting dependency on locale sort order (and thereby
allow removal of a variant expected-file).
Also, in citext, avoid assuming that lower('I') = 'i'. This isn't relevant
to Danish but it does fail in Turkish.
Another peculiarity of Danish locale is that it has an unusual idea
of how to sort upper vs. lower case. One of the pltcl test cases has
an issue with that. Now that COLLATE works in all supported branches,
we can just change the test to be locale-independent, and get rid of
the variant expected file that used to support non-C locales.
runtime.sgml used to contain a table of estimated shared memory consumption
rates for max_connections and some other GUCs. Commit 390bfc643 removed
that on the well-founded grounds that (a) we weren't maintaining the
entries well and (b) it no longer mattered so much once we got out from
under SysV shmem limits. But it missed that there were even-more-obsolete
versions of some of those numbers in comments in postgresql.conf.sample.
Remove those too. Back-patch to 9.3 where the aforesaid commit went in.
Back-patch commit 1c1a7cbd6a, along with subsequent portability
fixes, into all active branches. Also, back-patch commits 696027727 and
596857043 (addition of zic -P option) into 9.1 and 9.2, just to reduce
differences between the branches. src/timezone/ is now largely identical
in all active branches, except that in 9.1, pgtz.c retains the
initial-timezone-selection code that was moved over to initdb in 9.2.
Ordinarily we wouldn't risk this much code churn in back branches, but it
seems necessary in this case, because among the changes are two feature
additions in the "zic" zone data file compiler (a larger limit on the
number of allowed DST transitions, and addition of a "%z" escape in zone
abbreviations). IANA have not yet started to use those features in their
tzdata files, but presumably they will before too long. If we don't update
then we'll be unable to adopt new timezone data. Also, installations built
with --with-system-tzdata (which includes most distro-supplied builds, I
believe) might fail even if we don't update our copies of the data files.
There are assorted bug fixes too, mostly affecting obscure timezones or
post-2037 dates.
Discussion: <13601.1468868947@sss.pgh.pa.us>
The old code used SEQ_MINVALUE to get the smallest int64 value. This
was done as a convenience to avoid having to deal with INT64_IS_BUSTED,
but that is obsolete now. Also, it is incorrect because the smallest
int64 value is actually SEQ_MINVALUE-1. Fix by writing out the constant
the long way, as it is done elsewhere in the code.
The Assert() here seems unreasonably optimistic. Andreas Seltenreich
found that it could fail with NaNs in the input geometries, and it
seems likely to me that it might fail in corner cases due to roundoff
error, even for ordinary input values. As a band-aid, make the function
return SQL NULL instead of crashing.
Report: <87d1md1xji.fsf@credativ.de>
When heap_update needs to look for a page for the new tuple version,
because the current one doesn't have sufficient free space, or when
columns have to be processed by the tuple toaster, it has to release the
lock on the old page during that. Otherwise there'd be lock ordering and
lock nesting issues.
To avoid concurrent sessions from trying to update / delete / lock the
tuple while the page's content lock is released, the tuple's xmax is set
to the current session's xid.
That unfortunately was done without any WAL logging, thereby violating
the rule that no XIDs may appear on disk, without an according WAL
record. If the database were to crash / fail over when the page level
lock is released, and some activity lead to the page being written out
to disk, the xid could end up being reused; potentially leading to the
row becoming invisible.
There might be additional risks by not having t_ctid point at the tuple
itself, without having set the appropriate lock infomask fields.
To fix, compute the appropriate xmax/infomask combination for locking
the tuple, and perform WAL logging using the existing XLOG_HEAP_LOCK
record. That allows the fix to be backpatched.
This issue has existed for a long time. There appears to have been
partial attempts at preventing dangers, but these never have fully been
implemented, and were removed a long time ago, in
11919160 (cf. HEAP_XMAX_UNLOGGED).
In master / 9.6, there's an additional issue, namely that the
visibilitymap's freeze bit isn't reset at that point yet. Since that's a
new issue, introduced only in a892234f83, that'll be fixed in a
separate commit.
Author: Masahiko Sawada and Andres Freund
Reported-By: Different aspects by Thomas Munro, Noah Misch, and others
Discussion: CAEepm=3fWAbWryVW9swHyLTY4sXVf0xbLvXqOwUoDiNCx9mBjQ@mail.gmail.com
Backpatch: 9.1/all supported versions
0ac5ad5 started to compress infomask bits in WAL records. Unfortunately
the replay routines for XLOG_HEAP_LOCK/XLOG_HEAP2_LOCK_UPDATED forgot to
reset the HEAP_XMAX_INVALID (and some other) hint bits.
Luckily that's not problematic in the majority of cases, because after a
crash/on a standby row locks aren't meaningful. Unfortunately that does
not hold true in the presence of prepared transactions. This means that
after a crash, or after promotion, row level locks held by a prepared,
but not yet committed, prepared transaction might not be enforced.
Discussion: 20160715192319.ubfuzim4zv3rqnxv@alap3.anarazel.de
Backpatch: 9.3, the oldest branch on which 0ac5ad5 is present.
When key-share locking a tuple that has been not-key-updated, and the
update is a committed transaction, in some cases we raised
serializability errors:
ERROR: could not serialize access due to concurrent update
Because the key-share doesn't conflict with the update, the error is
unnecessary and inconsistent with the case that the update hasn't
committed yet. This causes problems for some usage patterns, even if it
can be claimed that it's sufficient to retry the aborted transaction:
given a steady stream of updating transactions and a long locking
transaction, the long transaction can be starved indefinitely despite
multiple retries.
To fix, we recognize that HeapTupleSatisfiesUpdate can return
HeapTupleUpdated when an updating transaction has committed, and that we
need to deal with that case exactly as if it were a non-committed
update: verify whether the two operations conflict, and if not, carry on
normally. If they do conflict, however, there is a difference: in the
HeapTupleBeingUpdated case we can just sleep until the concurrent
transaction is gone, while in the HeapTupleUpdated case this is not
possible and we must raise an error instead.
Per trouble report from Olivier Dony.
In addition to a couple of test cases that verify the changed behavior,
I added a test case to verify the behavior that remains unchanged,
namely that errors are raised when a update that modifies the key is
used. That must still generate serializability errors. One
pre-existing test case changes behavior; per discussion, the new
behavior is actually the desired one.
Discussion: https://www.postgresql.org/message-id/560AA479.4080807@odoo.comhttps://www.postgresql.org/message-id/20151014164844.3019.25750@wrigleys.postgresql.org
Backpatch to 9.3, where the problem appeared.
GiST index build could go into an infinite loop when presented with boxes
(or points, circles or polygons) containing NaN component values. This
happened essentially because the code assumed that x == x is true for any
"double" value x; but it's not true for NaNs. The looping behavior was not
the only problem though: we also attempted to sort the items using simple
double comparisons. Since NaNs violate the trichotomy law, qsort could
(in principle at least) get arbitrarily confused and mess up the sorting of
ordinary values as well as NaNs. And we based splitting choices on box size
calculations that could produce NaNs, again resulting in undesirable
behavior.
To fix, replace all comparisons of doubles in this logic with
float8_cmp_internal, which is NaN-aware and is careful to sort NaNs
consistently, higher than any non-NaN. Also rearrange the box size
calculation to not produce NaNs; instead it should produce an infinity
for a box with NaN on one side and not-NaN on the other.
I don't by any means claim that this solves all problems with NaNs in
geometric values, but it should at least make GiST index insertion work
reliably with such data. It's likely that the index search side of things
still needs some work, and probably regular geometric operations too.
But with this patch we're laying down a convention for how such cases
ought to behave.
Per bug #14238 from Guang-Dih Lei. Back-patch to 9.2; the code used before
commit 7f3bd86843 is quite different and doesn't lock up on my simple
test case, nor on the submitter's dataset.
Report: <20160708151747.1426.60150@wrigleys.postgresql.org>
Discussion: <28685.1468246504@sss.pgh.pa.us>
Document that index storage is dependent on the operating system's
collation library ordering, and any change in that ordering can create
invalid indexes.
Discussion: 20160617154311.GB19359@momjian.us
Backpatch-through: 9.1
We were merely Assert'ing that the Var matched the RTE it's supposedly
from. But if the user passes incorrect information to pg_get_expr(),
the RTE might in fact not match; this led either to Assert failures
or core dumps, as reported by Chris Hanks in bug #14220. To fix, just
convert the Asserts to test-and-elog. Adjust an existing test-and-elog
elsewhere in the same function to be consistent in wording.
(If we really felt these were user-facing errors, we might promote them to
ereport's; but I can't convince myself that they're worth translating.)
Back-patch to 9.3; the problematic code doesn't exist before that, and
a quick check says that 9.2 doesn't crash on such cases.
Michael Paquier and Thomas Munro
Report: <20160629224349.1407.32667@wrigleys.postgresql.org>
Previously, these commands always planned the given query and went through
executor startup before deciding not to actually run the query if WITH NO
DATA is specified. This behavior is problematic for pg_dump because it
may cause errors to be raised that we would rather not see before a
REFRESH MATERIALIZED VIEW command is issued. See for example bug #13907
from Marian Krucina. This change is not sufficient to fix that particular
bug, because we also need to tweak pg_dump to issue the REFRESH later,
but it's a necessary step on the way.
A user-visible side effect of doing things this way is that the returned
command tag for WITH NO DATA cases will now be "CREATE MATERIALIZED VIEW"
or "CREATE TABLE AS", not "SELECT 0". We could preserve the old behavior
but it would take more code, and arguably that was just an implementation
artifact not intended behavior anyhow.
In 9.5 and HEAD, also get rid of the static variable CreateAsReladdr, which
was trouble waiting to happen; there is not any prohibition on nested
CREATE commands.
Back-patch to 9.3 where CREATE MATERIALIZED VIEW was introduced.
Michael Paquier and Tom Lane
Report: <20160202161407.2778.24659@wrigleys.postgresql.org>
After pg_upgrade, it is possible that some tuples' Xmax have multixacts
corresponding to the old installation; such multixacts cannot have
running members anymore. In many code sites we already know not to read
them and clobber them silently, but at least when VACUUM tries to freeze
a multixact or determine whether one needs freezing, there's an attempt
to resolve it to its member transactions by calling GetMultiXactIdMembers,
and if the multixact value is "in the future" with regards to the
current valid multixact range, an error like this is raised:
ERROR: MultiXactId 123 has not been created yet -- apparent wraparound
and vacuuming fails. Per discussion with Andrew Gierth, it is completely
bogus to try to resolve multixacts coming from before a pg_upgrade,
regardless of where they stand with regards to the current valid
multixact range.
It's possible to get from under this problem by doing SELECT FOR UPDATE
of the problem tuples, but if tables are large, this is slow and
tedious, so a more thorough solution is desirable.
To fix, we realize that multixacts in xmax created in 9.2 and previous
have a specific bit pattern that is never used in 9.3 and later (we
already knew this, per comments and infomask tests sprinkled in various
places, but we weren't leveraging this knowledge appropriately).
Whenever the infomask of the tuple matches that bit pattern, we just
ignore the multixact completely as if Xmax wasn't set; or, in the case
of tuple freezing, we act as if an unwanted value is set and clobber it
without decoding. This guarantees that no errors will be raised, and
that the values will be progressively removed until all tables are
clean. Most callers of GetMultiXactIdMembers are patched to recognize
directly that the value is a removable "empty" multixact and avoid
calling GetMultiXactIdMembers altogether.
To avoid changing the signature of GetMultiXactIdMembers() in back
branches, we keep the "allow_old" boolean flag but rename it to
"from_pgupgrade"; if the flag is true, we always return an empty set
instead of looking up the multixact. (I suppose we could remove the
argument in the master branch, but I chose not to do so in this commit).
This was broken all along, but the error-facing message appeared first
because of commit 8e9a16ab8f and was partially fixed in a25c2b7c4d.
This fix, backpatched all the way back to 9.3, goes approximately in the
same direction as a25c2b7c4d but should cover all cases.
Bug analysis by Andrew Gierth and Álvaro Herrera.
A number of public reports match this bug:
https://www.postgresql.org/message-id/20140330040029.GY4582@tamriel.snowman.nethttps://www.postgresql.org/message-id/538F3D70.6080902@publicrelay.comhttps://www.postgresql.org/message-id/556439CF.7070109@pscs.co.ukhttps://www.postgresql.org/message-id/SG2PR06MB0760098A111C88E31BD4D96FB3540@SG2PR06MB0760.apcprd06.prod.outlook.comhttps://www.postgresql.org/message-id/20160615203829.5798.4594@wrigleys.postgresql.org
Commit 0b0baf262 et al made this case print "(null)" on the grounds that
that's what happened on platforms that didn't crash. But neither behavior
was actually intentional. What we should print is just an empty string,
for compatibility with the behavior of SHOW and other ways of examining
string GUCs. Those code paths don't distinguish NULL from empty strings,
so we should not here either. Per gripe from Alain Radix.
Like the previous patch, back-patch to 9.2 where -C option was introduced.
Discussion: <CA+YdpwxPUADrmxSD7+Td=uOshMB1KkDN7G7cf+FGmNjjxMhjbw@mail.gmail.com>
If there's anyplace in our SGML docs that explains this behavior, I can't
find it right at the moment. Add an explanation in "Dependency Tracking"
which seems like the authoritative place for such a discussion. Per
gripe from Michelle Schwan.
While at it, update this section's example of a dependency-related
error message: they last looked like that in 8.3. And remove the
explanation of dependency updates from pre-7.3 installations, which
is probably no longer worth anybody's brain cells to read.
The bogus error message example seems like an actual documentation bug,
so back-patch to all supported branches.
Discussion: <20160620160047.5792.49827@wrigleys.postgresql.org>
Dilian Palauzov pointed out in bug #14201 that the docs failed to mention
the possibility of %R producing '(' due to an unmatched parenthesis.
He proposed just adding that in the same style as the other options were
listed; but it seemed to me that the sentence was already nearly
unintelligible, so I rewrote it a bit more extensively.
Report: <20160619121113.5789.68274@wrigleys.postgresql.org>
The inet/cidr types sometimes failed to reject IPv6 inputs with too many
colon-separated fields, instead translating them to '::/0'. This is the
result of a thinko in the original ISC code that seems to be as yet
unreported elsewhere. Per bug #14198 from Stefan Kaltenbrunner.
Report: <20160616182222.5798.959@wrigleys.postgresql.org>
Emit "(null)" instead, which was the behavior all along on platforms
that don't crash, eg OS X. Per report from Jehan-Guillaume de Rorthais.
Back-patch to 9.2 where -C option was introduced.
Michael Paquier
Report: <20160615204036.2d35d86a@firost>
This is to make sure there's enough room for translated versions of
the message. HEAD's already addressed this issue, but back-patch a
simple increase in the array size.
Discussion: <20160612145532.GA22965@postgresql.kr>
pg_type_aclmask reported the wrong type's OID when complaining that
it could not find a type's typelem. It also failed to provide a
suitable errcode when the initially given OID doesn't exist (which
is a user-facing error, since that OID can be user-specified).
pg_foreign_data_wrapper_aclmask and pg_foreign_server_aclmask likewise
lacked errcode specifications. Trivial cosmetic adjustments too.
The wrong-type-OID problem was reported by Petru-Florin Mihancea in
bug #14186; the other issues noted by me while reading the code.
These errors all seem to be aboriginal in the respective routines, so
back-patch as necessary.
Report: <20160613163159.5798.52928@wrigleys.postgresql.org>
Document these as "nearest integer >= argument" and "nearest integer <=
argument", which will hopefully be less confusing than the old formulation.
New wording is from Matlab via Dean Rasheed.
I changed the pg_description entries as well as the SGML docs. In the
back branches, this will only affect installations initdb'd in the future,
but it should be harmless otherwise.
Discussion: <CAEZATCW3yzJo-NMSiQs5jXNFbTsCEftZS-Og8=FvFdiU+kYuSA@mail.gmail.com>
In VPATH builds, the build directory was not being searched for files in
GETTEXT_FILES, leading to failure to construct the .pot files. This has
bit me all along, but never hard enough to get it fixed; I suppose not a
lot of people uses VPATH and NLS-enabled builds, and those that do,
don't do "make update-po" often.
This is a longstanding problem, so backpatch all the way back.
If we ANALYZE only selected columns of a table, we should not postpone
auto-analyze because of that; other columns may well still need stats
updates. As committed, the counter is left alone if a column list is
given, whether or not it includes all analyzable columns of the table.
Per complaint from Tomasz Ostrowski.
It's been like this a long time, so back-patch to all supported branches.
Report: <ef99c1bd-ff60-5f32-2733-c7b504eb960c@ato.waw.pl>
Adopt the same solution as in commit aa90e148ca, but this time
let's put the ugliness inside the write_stderr() macro, instead of
expecting each call site to deal with it. Back-port that decision
into psql/common.c where I got the macro from in the first place.
Per gripe from Peter Eisentraut.
Formerly, Unix builds of pg_dump/pg_restore would trap SIGINT and similar
signals and set a flag that was tested in various data-transfer loops.
This was prone to errors of omission (cf commit 3c8aa6654); and even if
the client-side response was prompt, we did nothing that would cause
long-running SQL commands (e.g. CREATE INDEX) to terminate early.
Also, the master process would effectively do nothing at all upon receipt
of SIGINT; the only reason it seemed to work was that in typical scenarios
the signal would also be delivered to the child processes. We should
support termination when a signal is delivered only to the master process,
though.
Windows builds had no console interrupt handler, so they would just fall
over immediately at control-C, again leaving long-running SQL commands to
finish unmolested.
To fix, remove the flag-checking approach altogether. Instead, allow the
Unix signal handler to send a cancel request directly and then exit(1).
In the master process, also have it forward the signal to the children.
On Windows, add a console interrupt handler that behaves approximately
the same. The main difference is that a single execution of the Windows
handler can send all the cancel requests since all the info is available
in one process, whereas on Unix each process sends a cancel only for its
own database connection.
In passing, fix an old problem that DisconnectDatabase tends to send a
cancel request before exiting a parallel worker, even if nothing went
wrong. This is at least a waste of cycles, and could lead to unexpected
log messages, or maybe even data loss if it happened in pg_restore (though
in the current code the problem seems to affect only pg_dump). The cause
was that after a COPY step, pg_dump was leaving libpq in PGASYNC_BUSY
state, causing PQtransactionStatus() to report PQTRANS_ACTIVE. That's
normally harmless because the next PQexec() will silently clear the
PGASYNC_BUSY state; but in a parallel worker we might exit without any
additional SQL commands after a COPY step. So add an extra PQgetResult()
call after a COPY to allow libpq to return to PGASYNC_IDLE state.
This is a bug fix, IMO, so back-patch to 9.3 where parallel dump/restore
were introduced.
Thanks to Kyotaro Horiguchi for Windows testing and code suggestions.
Original-Patch: <7005.1464657274@sss.pgh.pa.us>
Discussion: <20160602.174941.256342236.horiguchi.kyotaro@lab.ntt.co.jp>
Parallel dump did a totally pointless query to find out the name of each
table to be dumped, which it already knows. Parallel restore runs issued
lots of redundant SET commands because _doSetFixedOutputState() was invoked
once per TOC item rather than just once at connection start. While the
extra queries are insignificant if you're dumping or restoring large
tables, it still seems worth getting rid of them.
Also, give the responsibility for selecting the right client_encoding for
a parallel dump worker to setup_connection() where it naturally belongs,
instead of having ad-hoc code for that in CloneArchive(). And fix some
minor bugs like use of strdup() where pg_strdup() would be safer.
Back-patch to 9.3, mostly to keep the branches in sync in an area that
we're still finding bugs in.
Discussion: <5086.1464793073@sss.pgh.pa.us>
