The previous ordering of these steps satisfied the nominal requirement
that set_rel_pathlist_hook could editorialize on the whole set of Paths
constructed for a base relation. In practice, though, trying to change
the set of partial paths was impossible. Adding one didn't work because
(a) it was too late to be included in Gather paths made by the core code,
and (b) calling add_partial_path after generate_gather_paths is unsafe,
because it might try to delete a path it thinks is dominated, but that
is already embedded in some Gather path(s). Nor could the hook safely
remove partial paths, for the same reason that they might already be
embedded in Gathers.
Better to call extensions first, let them add partial paths as desired,
and then gather. In v11 and up, we already doubled down on that ordering
by postponing gathering even further for single-relation queries; so even
if the hook wished to editorialize on Gather path construction, it could
not.
Report and patch by KaiGai Kohei. Back-patch to 9.6 where Gather paths
were added.
Discussion: https://postgr.es/m/CAOP8fzahwpKJRTVVTqo2AE=mDTz_efVzV6Get_0=U3SO+-ha1A@mail.gmail.com
Historically we've had each release branch include all prior branches'
notes, including minor-release changes, back to the beginning of the
project. That's basically an O(N^2) proposition, and it was starting to
catch up with us: as of HEAD the back-branch release notes alone accounted
for nearly 30% of the documentation. While there's certainly some value
in easy access to back-branch notes, this is getting out of hand.
Hence, switch over to the rule that each branch contains only its own
release notes. So as to not make older notes too hard to find, each
branch will provide URLs for the immediately preceding branches'
release notes on the project website.
There might be value in providing aggregated notes across all branches
somewhere on the website, but that's a task for another day.
Discussion: https://postgr.es/m/cbd4aeb5-2d9c-8b84-e968-9e09393d4c83@postgresql.org
Add PG_CFLAGS, PG_CXXFLAGS, and PG_LDFLAGS variables to pgxs.mk which
will be appended or prepended to the corresponding make variables.
Notably, there was previously no way to pass custom CXXFLAGS to third
party extension module builds, COPT and PROFILE supporting only CFLAGS
and LDFLAGS.
Backpatch all the way down to ease integration with existing
extensions.
Author: Christoph Berg
Reviewed-by: Andres Freund, Tom Lane, Michael Paquier
Discussion: https://postgr.es/m/20181113104005.GA32154@msg.credativ.de
Backpatch-through: 9.4
Previously, \g would successfully execute the COPY command, but
the target specification if any was ignored, so that the data was
always dumped to the regular query output target. This seems like
a clear bug, so let's not just fix it but back-patch it.
While at it, adjust the documentation for \copy to recommend
"COPY ... TO STDOUT \g foo" as a plausible alternative.
Back-patch to 9.5. The problem exists much further back, but the
code associated with \g was refactored enough in 9.5 that we'd
need a significantly different patch for 9.4, and it doesn't
seem worth the trouble.
Daniel Vérité, reviewed by Fabien Coelho
Discussion: https://postgr.es/m/15dadc39-e050-4d46-956b-dcc4ed098753@manitou-mail.org
Since LISTEN is (still) disallowed, UNLISTEN must be a no-op in a
hot-standby session, and so there's no harm in allowing it. This
change allows client code to not worry about whether it's connected
to a primary or standby server when performing session-state-reset
type activities. (Note that DISCARD ALL, which includes UNLISTEN,
was already allowed, making it inconsistent to reject UNLISTEN.)
Per discussion, back-patch to all supported versions.
Shay Rojansky, reviewed by Mi Tar
Discussion: https://postgr.es/m/CADT4RqCf2gA_TJtPAjnGzkC3ZiexfBZiLmA-mV66e4UyuVv8bA@mail.gmail.com
Attempting to use a temporary table within a two-phase transaction is
forbidden for ages. However, there have been uncovered grounds for
a couple of other object types and commands which work on temporary
objects with two-phase commit. In short, trying to create, lock or drop
an object on a temporary schema should not be authorized within a
two-phase transaction, as it would cause its state to create
dependencies with other sessions, causing all sorts of side effects with
the existing session or other sessions spawned later on trying to use
the same temporary schema name.
Regression tests are added to cover all the grounds found, the original
report mentioned function creation, but monitoring closer there are many
other patterns with LOCK, DROP or CREATE EXTENSION which are involved.
One of the symptoms resulting in combining both is that the session
which used the temporary schema is not able to shut down completely,
waiting for being able to drop the temporary schema, something that it
cannot complete because of the two-phase transaction involved with
temporary objects. In this case the client is able to disconnect but
the session remains alive on the backend-side, potentially blocking
connection backend slots from being used. Other problems reported could
also involve server crashes.
This is back-patched down to v10, which is where 9b013dc has introduced
MyXactFlags, something that this patch relies on.
Reported-by: Alexey Bashtanov
Author: Michael Paquier
Reviewed-by: Masahiko Sawada
Discussion: https://postgr.es/m/5d910e2e-0db8-ec06-dd5f-baec420513c3@imap.cc
Backpatch-through: 10
These have been found while cross-checking for the use of unique words
in the documentation, and a wait event was not getting generated in a way
consistent to what the documentation provided.
Author: Alexander Lakhin
Discussion: https://postgr.es/m/9b5a3a85-899a-ae62-dbab-1e7943aa5ab1@gmail.com
Since approximately PostgreSQL 10, it is no longer required that
environment variables at installation time such as PERL, PYTHON, TCLSH
be "full path names", so change that phrasing in the installation
instructions. (The exact time of change appears to differ for PERL
and the others, but it works consistently in PostgreSQL 10.)
Also while we're here document the defaults for PERL and PYTHON, but
since the search list for TCLSH is so long, let's leave that out so we
don't need to maintain a copy of that list in the installation
instructions.
runtime.sgml said that you couldn't change SysV IPC parameters on OpenBSD
except by rebuilding the kernel. That's definitely wrong in OpenBSD 6.x,
and excavation in their man pages says it changed in OpenBSD 3.3.
Update NetBSD and OpenBSD sections to recommend adjustment of the SEMMNI
and SEMMNS settings, which are painfully small by default on those
platforms. (The discussion thread contemplated recommending that
people select POSIX semaphores instead, but the performance consequences
of that aren't really clear, so I'll refrain.)
Remove pointless discussion of SEMMNU and SEMMAP from the FreeBSD
section. Minor other wordsmithing.
Discussion: https://postgr.es/m/27582.1546928073@sss.pgh.pa.us
"$user" in a search_path string is replaced by CURRENT_USER not
SESSION_USER. (It actually was SESSION_USER in the initial implementation,
but we changed it shortly later, and evidently forgot to fix the docs to
match.)
Noted by antonov@stdpr.ru
Discussion: https://postgr.es/m/159151fb45d490c8d31ea9707e9ba99d@stdpr.ru
The source code comments documented this, but the user-facing docs, not
so much. Add a section to Appendix B that discusses it.
In passing, improve a couple other things in Appendix B --- notably,
a long-obsolete claim that time zone abbreviations are looked up in
a fixed table.
Per bug #15527 from Michael Davidson.
Discussion: https://postgr.es/m/15527-f1be0b4dc99ebbe7@postgresql.org
The documentation claimed that an enum type requires "one or more"
labels, but since 1fd9883ff49, zero labels are also allowed.
Reported-by: Lukas Eder <lukas.eder@gmail.com>
Bug: #15356
This didn't actually work: COPY would fail to flush the right files, and
instead would try to flush a non-existing file, causing the whole
transaction to fail.
Cope by raising an error as soon as the command is sent instead, to
avoid a nasty later surprise. Of course, it would be much better to
make it work, but we don't have a patch for that yet, and we don't know
if we'll want to backpatch one when we do.
Reported-by: Tomas Vondra
Author: David Rowley
Reviewed-by: Amit Langote, Steve Singer, Tomas Vondra
On some operating systems, it doesn't make sense to retry fsync(),
because dirty data cached by the kernel may have been dropped on
write-back failure. In that case the only remaining copy of the
data is in the WAL. A subsequent fsync() could appear to succeed,
but not have flushed the data. That means that a future checkpoint
could apparently complete successfully but have lost data.
Therefore, violently prevent any future checkpoint attempts by
panicking on the first fsync() failure. Note that we already
did the same for WAL data; this change extends that behavior to
non-temporary data files.
Provide a GUC data_sync_retry to control this new behavior, for
users of operating systems that don't eject dirty data, and possibly
forensic/testing uses. If it is set to on and the write-back error
was transient, a later checkpoint might genuinely succeed (on a
system that does not throw away buffers on failure); if the error is
permanent, later checkpoints will continue to fail. The GUC defaults
to off, meaning that we panic.
Back-patch to all supported releases.
There is still a narrow window for error-loss on some operating
systems: if the file is closed and later reopened and a write-back
error occurs in the intervening time, but the inode has the bad
luck to be evicted due to memory pressure before we reopen, we could
miss the error. A later patch will address that with a scheme
for keeping files with dirty data open at all times, but we judge
that to be too complicated to back-patch.
Author: Craig Ringer, with some adjustments by Thomas Munro
Reported-by: Craig Ringer
Reviewed-by: Robert Haas, Thomas Munro, Andres Freund
Discussion: https://postgr.es/m/20180427222842.in2e4mibx45zdth5%40alap3.anarazel.de
This hasn't been correct since 9.3 added "latex-longtable".
I left the phraseology "Unique abbreviations are allowed" alone.
It's correct as far as it goes, and we are studiously refraining
from specifying exactly what happens if you give a non-unique
abbreviation. (The answer in the back branches is "you get a
backwards-compatible choice", and the answer in HEAD will shortly
be "you get an error", but there seems no need to mention such
details here.)
Daniel Vérité
Discussion: https://postgr.es/m/cb7e1caf-3ea6-450d-af28-f524903a030c@manitou-mail.org
This commit fixes a set of issues with ON COMMIT actions when used on
partitioned tables and tables with inheritance children:
- Applying ON COMMIT DROP on a partitioned table with partitions or on a
table with inheritance children caused a failure at commit time, with
complains about the children being already dropped as all relations are
dropped one at the same time.
- Applying ON COMMIT DELETE on a partition relying on a partitioned
table which uses ON COMMIT DROP would cause the partition truncation to
fail as the parent is removed first.
The solution to the first problem is to handle the removal of all the
dependencies in one go instead of dropping relations one-by-one, based
on a suggestion from Álvaro Herrera. So instead all the relation OIDs
to remove are gathered and then processed in one round of multiple
deletions.
The solution to the second problem is to reorder the actions, with
truncation happening first and relation drop done after. Even if it
means that a partition could be first truncated, then immediately
dropped if its partitioned table is dropped, this has the merit to keep
the code simple as there is no need to do existence checks on the
relations to drop.
Contrary to a manual TRUNCATE on a partitioned table, ON COMMIT DELETE
does not cascade to its partitions. The ON COMMIT action defined on
each partition gets the priority.
Author: Michael Paquier
Reviewed-by: Amit Langote, Álvaro Herrera, Robert Haas
Discussion: https://postgr.es/m/68f17907-ec98-1192-f99f-8011400517f5@lab.ntt.co.jp
Backpatch-through: 10
Previously it was possible to set client_min_messages to FATAL or PANIC,
which had the effect of suppressing transmission of regular ERROR messages
to the client. Perhaps that seemed like a useful option in the past, but
the trouble with it is that it breaks guarantees that are explicitly made
in our FE/BE protocol spec about how a query cycle can end. While libpq
and psql manage to cope with the omission, that's mostly because they
are not very bright; client libraries that have more semantic knowledge
are likely to get confused. Notably, pgODBC doesn't behave very sanely.
Let's fix this by getting rid of the ability to set client_min_messages
above ERROR.
In HEAD, just remove the FATAL and PANIC options from the set of allowed
enum values for client_min_messages. (This change also affects
trace_recovery_messages, but that's OK since these aren't useful values
for that variable either.)
In the back branches, there was concern that rejecting these values might
break applications that are explicitly setting things that way. I'm
pretty skeptical of that argument, but accommodate it by accepting these
values and then internally setting the variable to ERROR anyway.
In all branches, this allows a couple of tiny simplifications in the
logic in elog.c, so do that.
Also respond to the point that was made that client_min_messages has
exactly nothing to do with the server's logging behavior, and therefore
does not belong in the "When To Log" subsection of the documentation.
The "Statement Behavior" subsection is a better match, so move it there.
Jonah Harris and Tom Lane
Discussion: https://postgr.es/m/7809.1541521180@sss.pgh.pa.us
Discussion: https://postgr.es/m/15479-ef0f4cc2fd995ca2@postgresql.org
I removed the item about the pg_stat_statements change from
release-11.sgml, as part of a sweep to delete items already committed
in 11.0; but actually we'd best keep it to ensure that people who've
pg_upgraded their databases will take the requisite action. Also make
said action more visible by making it into its own para. Noted by
Jonathan Katz.
The solution arrived at in commit e74dd00f5 presumes that the compiler
has a suitable default -isysroot setting ... but further experience
shows that in many combinations of macOS version, XCode version, Xcode
command line tools version, and phase of the moon, Apple's compiler
will *not* supply a default -isysroot value.
We could potentially go back to the approach used in commit 68fc227dd,
but I don't have a lot of faith in the reliability or life expectancy of
that either. Let's just revert to the approach already shipped in 11.0,
namely specifying an -isysroot switch globally. As a partial response to
the concerns raised by Jakob Egger, adjust the contents of Makefile.global
to look like
CPPFLAGS = -isysroot $(PG_SYSROOT) ...
PG_SYSROOT = /path/to/sysroot
This allows overriding the sysroot path at build time in a relatively
painless way.
Add documentation to installation.sgml about how to use the PG_SYSROOT
option. I also took the opportunity to document how to work around
macOS's "System Integrity Protection" feature.
As before, back-patch to all supported versions.
Discussion: https://postgr.es/m/20840.1537850987@sss.pgh.pa.us
