This commit improves efficiency in FastPathTransferRelationLocks()
and GetLockConflicts(), which iterate over PGPROCs to search for
fast-path locks.
Previously, these functions recalculated the fast-path group during
every loop iteration, even though it remained constant. This update
optimizes the process by calculating the group once and reusing it
throughout the loop.
The functions also now skip empty fast-path groups, avoiding
unnecessary scans of their slots. Additionally, groups belonging to
inactive backends (with pid=0) are always empty, so checking
the group is sufficient to bypass these backends, further enhancing
performance.
Author: Fujii Masao <masao.fujii@gmail.com>
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Reviewed-by: Ashutosh Bapat <ashutosh.bapat.oss@gmail.com>
Discussion: https://postgr.es/m/07d5fd6a-71f1-4ce8-8602-4cc6883f4bd1@oss.nttdata.com
PrepareSortSupportFromIndexRel() was accepting btree strategy numbers
purely for the purpose of comparing it later against btree strategies
to determine if the sort direction was forward or reverse. Change
that. Instead, pass a bool directly, to indicate the same without an
unfortunate assumption that a strategy number refers specifically to a
btree strategy. (This is similar in spirit to commits 0d2aa4d4937 and
c594f1ad2ba.)
(This could arguably be simplfied further by having the callers fill
in ssup_reverse directly. But this way, it preserves consistency by
having all PrepareSortSupport*() variants be responsible for filling
in ssup_reverse.)
Moreover, remove the hardcoded check against BTREE_AM_OID, and check
against amcanorder instead, which is the actual requirement.
Co-authored-by: Mark Dilger <mark.dilger@enterprisedb.com>
Discussion: https://www.postgresql.org/message-id/flat/E72EAA49-354D-4C2E-8EB9-255197F55330@enterprisedb.com
It doesn't actually work, even with allow_system_table_mods turned on:
the ALTER TABLE operation is rejected by ATSimplePermissions(), so even
the error message we're adding in this commit is unreachable.
Add a test case for it.
Author: Nikolay Shaplov <dhyan@nataraj.su>
Discussion: https://postgr.es/m/1913854.tdWV9SEqCh@thinkpad-pgpro
To avoid pinning too much of the buffer pool at once, read_stream.c
previously used LimitAdditionalPins(). The coding was naive, and only
considered the available buffers at stream construction time.
This commit checks before each StartReadBuffers() call with
GetAdditionalPinLimit(). The result might change over time due to pins
acquired outside this stream by the same backend. No extra CPU cycles
are added to the all-buffered fast-path code, but the I/O-starting path
now considers the up-to-date remaining buffer limit.
In practice it was quite difficult to exceed limits and cause any real
problems in v17, so no back-patch for now, but proposed changes will
make it easier.
Per code review from Andres, in the course of testing his AIO patches.
Reviewed-by: Andres Freund <andres@anarazel.de> (earlier versions)
Discussion: https://postgr.es/m/CA%2BhUKGK_%3D4CVmMHvsHjOVrK6t4F%3DLBpFzsrr3R%2BaJYN8kcTfWg%40mail.gmail.com
This allows building PL/Python against any Python 3.x version and
using another Python 3.x version at run time. This is useful for
installers that want to run against a separately downloaded Python, so
that they don't have to bundle it themselves.
This builds on the earlier patch to only use APIs supported by the
Limited API.
At the moment, this is not activated on MSVC because that leads to
build failures that no one could explain or cared enough to address.
This could be done later.
Reviewed-by: Jakob Egger <jakob@eggerapps.at>
Discussion: https://www.postgresql.org/message-id/flat/ee410de1-1e0b-4770-b125-eeefd4726a24@eisentraut.org
When pg_nodiscard was first added, the C standard draft had it as a
function specifier, and so the code comment about placement was
written with that in mind. The final C23 standard has it as an
attribute and the placement rules are a bit different for that.
Specifically, it needs to be before extern or static. (Or at least
both current clang and gcc require that.) So just swap these. (To be
clear: The current implementation with gcc attributes doesn't care.
This change is just for maximum forward compatibility for non-gcc
compilers.) This also keeps the order consistent with the previously
introduced pg_noreturn. Also update the code comment to reflect the
mentioned developments since its introduction.
Reviewed-by: Dagfinn Ilmari Mannsåker <ilmari@ilmari.org>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://www.postgresql.org/message-id/flat/pxr5b3z7jmkpenssra5zroxi7qzzp6eswuggokw64axmdixpnk@zbwxuq7gbbcw
Previously the support functions assumed that the caller needed one pin
to make progress, and could optionally use some more, allowing enough
for every connection to do the same. Add a couple more functions for
callers that want to know:
* what the maximum possible number could be, irrespective of currently
held pins, for space planning purposes
* how many additional pins they could acquire right now, without the
special case allowing one pin, for callers that already hold pins and
could already make progress even if no extra pins are available
The pin limit logic began in commit 31966b15. This refactoring is
better suited to read_stream.c, which will be adjusted to respect the
remaining limit as it changes over time in a follow-up commit. It also
computes MaxProportionalPins up front, to avoid performing divisions
whenever a caller needs to check the balance.
Reviewed-by: Andres Freund <andres@anarazel.de> (earlier versions)
Discussion: https://postgr.es/m/CA%2BhUKGK_%3D4CVmMHvsHjOVrK6t4F%3DLBpFzsrr3R%2BaJYN8kcTfWg%40mail.gmail.com
The problem is that ALTER SUBSCRIPTION ... SET PUBLICATION ... will lead
to restarting of apply worker and after the restart, the apply worker will
use the existing slot and replication origin corresponding to the
subscription. Now, it is possible that before the restart, the origin has
not been updated, and the WAL start location points to a location before
where PUBLICATION pointed to by SET PUBLICATION doesn't exist, and that
can lead to an error like: "ERROR: publication "pub1" does not exist".
Once this error occurs, apply worker will never be able to proceed and
will always return the same error.
We decided to skip loading the publication if the publication does not
exist. The publication is loaded later and updates the relation entry when
the publication gets created.
We decided not to backpatch this as this is a behaviour change, and we don't
see field reports. This problem has been found by intermittent buildfarm
failures.
Author: vignesh C <vignesh21@gmail.com>
Reviewed-by: Dilip Kumar <dilipbalaut@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Discussion: https://postgr.es/m/flat/CALDaNm0-n8FGAorM%2BbTxkzn%2BAOUyx5%3DL_XmnvOP6T24%2B-NcBKg%40mail.gmail.com
Discussion: https://postgr.es/m/CAA4eK1+T-ETXeRM4DHWzGxBpKafLCp__5bPA_QZfFQp7-0wj4Q@mail.gmail.com
If the given input_type yields valid results from both
get_element_type and get_array_type, initArrayResultAny believed the
former and treated the input as an array type. However this is
inconsistent with what get_promoted_array_type does, leading to
situations where the output of an ARRAY() subquery is labeled with
the wrong type: it's labeled as oidvector[] but is really a 2-D
array of OID. That at least results in strange output, and can
result in crashes if further processing such as unnest() is applied.
AFAIK this is only possible with the int2vector and oidvector
types, which are special-cased to be treated mostly as true arrays
even though they aren't quite.
Fix by switching the logic to match get_promoted_array_type by
testing get_array_type not get_element_type, and remove an Assert
thereby made pointless. (We need not introduce a symmetrical
check for get_element_type in the other if-branch, because
initArrayResultArr will check it.) This restores the behavior
that existed before bac27394a introduced initArrayResultAny:
the output really is int2vector[] or oidvector[].
Comparable confusion exists when an input of an ARRAY[] construct
is int2vector or oidvector: transformArrayExpr decides it's dealing
with a multidimensional array constructor, and we end up with
something that's a multidimensional OID array but is alleged to be
of type oidvector. I have not found a crashing case here, but it's
easy to demonstrate totally-wrong results. Adjust that code so
that what you get is an oidvector[] instead, for consistency with
ARRAY() subqueries. (This change also makes these types work like
domains-over-arrays in this context, which seems correct.)
Bug: #18840
Reported-by: yang lei <ylshiyu@126.com>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/18840-fbc9505f066e50d6@postgresql.org
Backpatch-through: 13
We can make the output look a bit better by aligning each lock's
definition, so add some padding space to achieve that. This change
makes no practical difference, but casual onlookers will be less
distracted by (lack of) whitespace.
Author: Gurjeet Singh <gurjeet@singh.im>
Discussion: https://postgr.es/m/CABwTF4VxfwDtRV-H22_XK4XeDogaV-Vaobu+af5U=8ZAZn9ZZQ@mail.gmail.com
We want to support a "noreturn" decoration on more compilers besides
just GCC-compatible ones, but for that we need to move the decoration
in front of the function declaration instead of either behind it or
wherever, which is the current style afforded by GCC-style attributes.
Also rename the macro to "pg_noreturn" to be similar to the C11
standard "noreturn".
pg_noreturn is now supported on all compilers that support C11 (using
_Noreturn), as well as GCC-compatible ones (using __attribute__, as
before), as well as MSVC (using __declspec). (When PostgreSQL
requires C11, the latter two variants can be dropped.)
Now, all supported compilers effectively support pg_noreturn, so the
extra code for !HAVE_PG_ATTRIBUTE_NORETURN can be dropped.
This also fixes a possible problem if third-party code includes
stdnoreturn.h, because then the current definition of
#define pg_attribute_noreturn() __attribute__((noreturn))
would cause an error.
Note that the C standard does not support a noreturn attribute on
function pointer types. So we have to drop these here. There are
only two instances at this time, so it's not a big loss. In one case,
we can make up for it by adding the pg_noreturn to a wrapper function
and adding a pg_unreachable(), in the other case, the latter was
already done before.
Reviewed-by: Dagfinn Ilmari Mannsåker <ilmari@ilmari.org>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://www.postgresql.org/message-id/flat/pxr5b3z7jmkpenssra5zroxi7qzzp6eswuggokw64axmdixpnk@zbwxuq7gbbcw
When pulling up a subquery, if the subquery's target list items are
used in grouping set columns, we need to wrap them in PlaceHolderVars.
This ensures that expressions retain their separate identity so that
they will match grouping set columns when appropriate.
In 90947674f, we decided to wrap subquery outputs that are non-var
expressions in PlaceHolderVars. This prevents const-simplification
from merging them into the surrounding expressions after subquery
pullup, which could otherwise lead to failing to match those
subexpressions to grouping set columns, with the effect that they'd
not go to null when expected.
However, that left some loose ends. If the subquery's target list
contains two or more identical Var expressions, we can still fail to
match the Var expression to the expected grouping set expression.
This is not related to const-simplification, but rather to how we
match expressions to lower target items in setrefs.c.
For sort/group expressions, we use ressortgroupref matching, which
works well. For other expressions, we primarily rely on comparing the
expressions to determine if they are the same. Therefore, we need a
way to prevent setrefs.c from matching the expression to some other
identical ones.
To fix, wrap all subquery outputs in PlaceHolderVars if the parent
query uses grouping sets, ensuring that they preserve their separate
identity throughout the whole planning process.
Reported-by: Dean Rasheed <dean.a.rasheed@gmail.com>
Author: Richard Guo <guofenglinux@gmail.com>
Reviewed-by: Dean Rasheed <dean.a.rasheed@gmail.com>
Discussion: https://postgr.es/m/CAMbWs4-meSahaanKskpBn0KKxdHAXC1_EJCVWHxEodqirrGJnw@mail.gmail.com
In pull_up_simple_subquery and pull_up_constant_function, there is
code that sets wrap_non_vars to true when dealing with an appendrel
member. The goal is to wrap subquery outputs that are not simple Vars
in PlaceHolderVars, ensuring that what we pull up doesn't get merged
into a surrounding expression during later processing, which could
cause it to fail to match the expression actually available from the
appendrel.
However, this is unnecessary. When pulling up an appendrel child
subquery, the only part of the upper query that could reference the
appendrel child yet is the translated_vars list of the associated
AppendRelInfo that we just made for this child. Furthermore, we do
not want to force use of PHVs in the AppendRelInfo, as there is no
outer join between. In fact, perform_pullup_replace_vars always sets
wrap_non_vars to false before performing pullup_replace_vars on the
AppendRelInfo.
This patch simply removes the code that sets wrap_non_vars to true for
UNION ALL subqueries.
Author: Richard Guo <guofenglinux@gmail.com>
Reviewed-by: Dean Rasheed <dean.a.rasheed@gmail.com>
Discussion: https://postgr.es/m/CAMbWs4-VXDEi1v+hZYLxpOv0riJxHsCkCH1f46tLnhonEAyGCQ@mail.gmail.com
Upcoming optimizations will add complexity to convert_case(). This
patch reorganizes slightly so that the complexity can be contained
within the logic to convert the case of a single character, rather
than mixing it in with logic to iterate through the string.
Reviewed-by: Alexander Borisov <lex.borisov@gmail.com>
Discussion: https://postgr.es/m/44005c3d-88f4-4a26-981f-fd82dfa8e313@gmail.com
On Publication rename, we need to only invalidate the RelationSyncCache
entries corresponding to relations that are part of the publication being
renamed.
As part of this patch, we introduce a new invalidation message to
invalidate the cache maintained by the logical decoding output plugin. We
can't use existing relcache invalidation for this purpose, as that would
unnecessarily cause relcache invalidations in other backends.
This will improve performance by building fewer relation cache entries
during logical replication.
Author: Hayato Kuroda <kuroda.hayato@fujitsu.com>
Author: Shlok Kyal <shlok.kyal.oss@gmail.com>
Reviewed-by: Hou Zhijie <houzj.fnst@fujitsu.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Discussion: https://postgr.es/m/OSCPR01MB14966C09AA201EFFA706576A7F5C92@OSCPR01MB14966.jpnprd01.prod.outlook.com
In a couple of places, read_stream.c assumed that io_combine_limit would
be stable during the lifetime of a stream. That is not true in at least
one unusual case: streams held by CURSORs where you could change the GUC
between FETCH commands, with unpredictable results.
Fix, by storing stream->io_combine_limit and referring only to that
after construction. This mirrors the treatment of the other important
setting {effective,maintenance}_io_concurrency, which is stored in
stream->max_ios.
One of the cases was the queue overflow space, which was sized for
io_combine_limit and could be overrun if the GUC was increased. Since
that coding was a little hard to follow, also introduce a variable for
better readability instead of open-coding the arithmetic. Doing so
revealed an off-by-one thinko while clamping max_pinned_buffers to
INT16_MAX, though that wasn't a live bug due to the current limits on
GUC values.
Back-patch to 17.
Discussion: https://postgr.es/m/CA%2BhUKG%2B2T9p-%2BzM6Eeou-RAJjTML6eit1qn26f9twznX59qtCA%40mail.gmail.com
Commit 3c152a27b06 mistakenly repeated JSONTYPE_JSON in a condition,
omitting JSONTYPE_CAST. As a result, datum_to_jsonb_internal() failed
to reject inputs that were casts (e.g., from an enum to json as in the
example below) when used as keys in JSON constructors.
This led to a crash in cases like:
SELECT JSON_OBJECT('happy'::mood: '123'::jsonb);
where 'happy'::mood is implicitly cast to json. The missing check
meant such casted values weren’t properly rejected as invalid
(non-scalar) JSON keys.
Reported-by: Maciek Sakrejda <maciek@pganalyze.com>
Reviewed-by: Tender Wang <tndrwang@gmail.com>
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Maciek Sakrejda <maciek@pganalyze.com>
Discussion: https://postgr.es/m/CADXhmgTJtJZK9A3Na_ry+Xrq-ghjcejBRhcRMzWZvbd__QdgJA@mail.gmail.com
Backpatch-through: 17
This commit enhances pg_rewind's --write-recovery-conf option to
include the dbname in the generated primary_conninfo value when
specified in the --source-server option. With this modification, the
rewound server can connect to the primary server without manual
configuration file modifications when sync_replication_slots is
enabled.
Reviewed-by: Hayato Kuroda <kuroda.hayato@fujitsu.com>
Reviewed-by: Peter Smith <smithpb2250@gmail.com>
Discussion: https://postgr.es/m/CAD21AoAkW=Ht0k9dVoBTCcqLiiZ2MXhVr+d=j2T_EZMerGrLWQ@mail.gmail.com
There used to be bespoken pools for these structs to reduce the
palloc/pfree overhead, but that was ripped out a long time ago and
replaced with the generic, cheaper generational memory allocator
(commit a4ccc1cef5). The Get/Return terminology made sense with the
pools, as you "got" an object from the pool and "returned" it later,
but now it just looks weird. Rename to Alloc/Free.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/c9e43d2d-8e83-444f-b111-430377368989@iki.fi
The only caller, select_best_grantor(), can instead use
pg_popcount64(). This isn't performance-critical code, but we
might as well use the centralized implementation. While at it, add
some test coverage for this part of select_best_grantor().
Reviewed-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/Z9GtL7Nm6hsYyJnF%40nathan
We did not wake up on interrupts while waiting on async events on an
async-capable append node. For example, if you tried to cancel the
query, nothing would happen until one of the async subplans becomes
readable. To fix, add WL_LATCH_SET to the WaitEventSet.
Backpatch down to v14 where async Append execution was introduced.
Discussion: https://www.postgresql.org/message-id/37a40570-f558-40d3-b5ea-5c2079b3b30b@iki.fi
makeWholeRowVar() has different rules for constructing a
whole-row Var depending on the kind of RTE it's representing.
This turns out to be problematic because the rewriter and planner
can convert view RTEs and set-returning-function RTEs into
subquery RTEs; so a whole-row Var made during planning might
look different from one made by the parser. In isolation this
doesn't cause any problem, but if a query contains Vars made
both ways for the same varno, there are cross-checks in the
executor that will complain. This manifests for UPDATE, DELETE,
and MERGE queries that use whole-row table references.
To fix, we need makeWholeRowVar() to produce the same result
from an inlined RTE as it would have for the original. For
an inlined view, we can use RangeTblEntry.relid to detect
that this had been a view RTE. For inlined SRFs, make a
data structure definition change akin to commit 47bb9db75,
and say that we won't clear RangeTblEntry.functions until
the end of planning. That allows makeWholeRowVar() to
repeat what it would have done with the unmodified RTE.
Reported-by: Duncan Sands <duncan.sands@deepbluecap.com>
Reported-by: Dean Rasheed <dean.a.rasheed@gmail.com>
Diagnosed-by: Tender Wang <tndrwang@gmail.com>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Dean Rasheed <dean.a.rasheed@gmail.com>
Discussion: https://postgr.es/m/3518c50a-ab18-482f-b916-a37263622501@deepbluecap.com
Backpatch-through: 13
Add log_connections option 'setup_durations' which logs durations of
several key parts of connection establishment and backend setup.
For an incoming connection, starting from when the postmaster gets a
socket from accept() and ending when the forked child backend is first
ready for query, there are multiple steps that could each take longer
than expected due to external factors. This logging provides visibility
into authentication and fork duration as well as the end-to-end
connection establishment and backend initialization time.
To make this portable, the timings captured in the postmaster (socket
creation time, fork initiation time) are passed through the
BackendStartupData.
Author: Melanie Plageman <melanieplageman@gmail.com>
Reviewed-by: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Reviewed-by: Fujii Masao <masao.fujii@oss.nttdata.com>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Jacob Champion <jacob.champion@enterprisedb.com>
Reviewed-by: Jelte Fennema-Nio <postgres@jeltef.nl>
Reviewed-by: Guillaume Lelarge <guillaume.lelarge@dalibo.com>
Discussion: https://postgr.es/m/flat/CAAKRu_b_smAHK0ZjrnL5GRxnAVWujEXQWpLXYzGbmpcZd3nLYw%40mail.gmail.com
Convert the boolean log_connections GUC into a list GUC comprised of the
connection aspects to log.
This gives users more control over the volume and kind of connection
logging.
The current log_connections options are 'receipt', 'authentication', and
'authorization'. The empty string disables all connection logging. 'all'
enables all available connection logging.
For backwards compatibility, the most common values for the
log_connections boolean are still supported (on, off, 1, 0, true, false,
yes, no). Note that previously supported substrings of on, off, true,
false, yes, and no are no longer supported.
Author: Melanie Plageman <melanieplageman@gmail.com>
Reviewed-by: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Reviewed-by: Fujii Masao <masao.fujii@oss.nttdata.com>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Discussion: https://postgr.es/m/flat/CAAKRu_b_smAHK0ZjrnL5GRxnAVWujEXQWpLXYzGbmpcZd3nLYw%40mail.gmail.com
9a8dd2c5a6d has added an initialization to PendingBackendStats, which
has been causing compilation warnings in the buildfarm. This code does
not strictly require it as PendingBackendStats is always initialized
with memset(0), so let's remove it.
Per report from multiple buildfarm members, like ayu and batfish, via
Tom Lane.
Author: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Discussion: https://postgr.es/m/1870853.1741749264@sss.pgh.pa.us
Using the Python Limited API would allow building PL/Python against
any Python 3.x version and using another Python 3.x version at run
time. This commit does not activate that, but it prepares the code to
only use APIs supported by the Limited API.
Implementation details:
- Convert static types to heap types
(https://docs.python.org/3/howto/isolating-extensions.html#heap-types).
- Replace PyRun_String() with component functions.
- Replace PyList_SET_ITEM() with PyList_SetItem().
This was previously committed as c47e8df815c and then reverted because
it wasn't working under Python older than 3.8. That has been fixed in
this version. There was a Python API change/bugfix between 3.7 and
3.8 that directly affects this patch. The relevant commit is
<https://github.com/python/cpython/commit/364f0b0f19c>. The
workarounds described there have been applied in this patch, and it
has been confirmed to work with Python 3.6 and 3.7.
Reviewed-by: Jakob Egger <jakob@eggerapps.at>
Discussion: https://www.postgresql.org/message-id/flat/ee410de1-1e0b-4770-b125-eeefd4726a24@eisentraut.org
The comment in GetTransactionSnapshot() said that you "should call
RegisterSnapshot or PushActiveSnapshot on the returned snap if it is
to be used very long". That felt too unclear to me. Make the comment
more strongly worded.
To enforce that rule and to catch potential bugs where a snapshot
might get invalidated while it's still in use, add an assertion to
HeapTupleSatisfiesMVCC() to check that the snapshot is registered or
pushed to active stack. No new bugs were found by this, but it seems
like good future-proofing. It's not a great place for the check;
HeapTupleSatisfiesMVCC() is in fact safe to call with an unregistered
snapshot, and the assertion won't catch other unsafe uses. But it goes
a long way in practice.
Fix a few cases that were playing fast and loose with that and just
assumed that the snapshot cannot be invalidated during a scan. Those
assumptions were not wrong, but they're not performance critical, so
let's drop the excuses and just register the snapshot. These were
false positives found by the new assertion.
Discussion: https://www.postgresql.org/message-id/7c56f180-b9e1-481e-8c1d-efa63de3ecbb@iki.fi
Previously, pg_logicalinspect functions were too trusting of their
input and blindly passed it to SnapBuildRestoreSnapshot(). If the
input pointed to a directory, the server could a PANIC error while
attempting to fsync_fname() with isdir=false on a directory.
This commit adds validation checks for input filenames and passes the
LSN extracted from the filename to SnapBuildRestoreSnapshot() instead
of the filename itself. It also adds regression tests for various
input patterns and permission checks.
Bug: #18828
Reported-by: Robins Tharakan <tharakan@gmail.com>
Co-authored-by: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Co-authored-by: Masahiko Sawada <sawada.mshk@gmail.com>
Discussion: https://postgr.es/m/18828-0f4701c635064211@postgresql.org
Up to now we just punted on showing the window definitions used
in a plan, with window function calls represented as "OVER (?)".
To improve that, show the window definition implemented by each
WindowAgg plan node, and reference their window names in OVER.
For nameless window clauses generated by "OVER (...)", assign
unique names w1, w2, etc.
In passing, re-order the properties shown for a WindowAgg node
so that the Run Condition (if any) appears after the Window
property and before the Filter (if any). This seems more
sensible since the Run Condition is associated with the Window
and acts before the Filter.
Thanks to David G. Johnston and Álvaro Herrera for design
suggestions.
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/144530.1741469955@sss.pgh.pa.us
Make nbtree's "1/3 of a page limit" BTMaxItemSize function-like macro
(which accepts a "page" argument) into an object-like macro that can be
used from code that doesn't have convenient access to an nbtree page.
Preparation for an upcoming patch that adds skip scan to nbtree.
Parallel index scans that use skip scan will serialize datums (not just
SAOP array subscripts) when scheduling primitive scans. BTMaxItemSize
will be used by btestimateparallelscan to determine how much DSM to
request.
Author: Peter Geoghegan <pg@bowt.ie>
Discussion: https://postgr.es/m/CAH2-Wz=H_RG5weNGeUG_TkK87tRBnH9mGCQj6WpM4V4FNWKv2g@mail.gmail.com
Expose the count of index searches/index descents in EXPLAIN ANALYZE's
output for index scan/index-only scan/bitmap index scan nodes. This
information is particularly useful with scans that use ScalarArrayOp
quals, where the number of index searches can be unpredictable due to
implementation details that interact with physical index characteristics
(at least with nbtree SAOP scans, since Postgres 17 commit 5bf748b8).
The information shown also provides useful context when EXPLAIN ANALYZE
runs a plan with an index scan node that successfully applied the skip
scan optimization (set to be added to nbtree by an upcoming patch).
The instrumentation works by teaching all index AMs to increment a new
nsearches counter whenever a new index search begins. The counter is
incremented at exactly the same point that index AMs already increment
the pg_stat_*_indexes.idx_scan counter (we're counting the same event,
but at the scan level rather than the relation level). Parallel queries
have workers copy their local counter struct into shared memory when an
index scan node ends -- even when it isn't a parallel aware scan node.
An earlier version of this patch that only worked with parallel aware
scans became commit 5ead85fb (though that was quickly reverted by commit
d00107cd following "debug_parallel_query=regress" buildfarm failures).
Our approach doesn't match the approach used when tracking other index
scan related costs (e.g., "Rows Removed by Filter:"). It is comparable
to the approach used in similar cases involving costs that are only
readily accessible inside an access method, not from the executor proper
(e.g., "Heap Blocks:" output for a Bitmap Heap Scan, which was recently
enhanced to show per-worker costs by commit 5a1e6df3, using essentially
the same scheme as the one used here). It is necessary for index AMs to
have direct responsibility for maintaining the new counter, since the
counter might need to be incremented multiple times per amgettuple call
(or per amgetbitmap call). But it is also necessary for the executor
proper to manage the shared memory now used to transfer each worker's
counter struct to the leader.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Robert Haas <robertmhaas@gmail.com>
Reviewed-By: Tomas Vondra <tomas@vondra.me>
Reviewed-By: Masahiro Ikeda <ikedamsh@oss.nttdata.com>
Reviewed-By: Matthias van de Meent <boekewurm+postgres@gmail.com>
Discussion: https://postgr.es/m/CAH2-WzkRqvaqR2CTNqTZP0z6FuL4-3ED6eQB0yx38XBNj1v-4Q@mail.gmail.com
Discussion: https://postgr.es/m/CAH2-Wz=PKR6rB7qbx+Vnd7eqeB5VTcrW=iJvAsTsKbdG+kW_UA@mail.gmail.com
With improperly defined operator classes, it's possible to get a
Postgres crash because we'd try to invoke a procedure that doesn't
exist. This is because the code is being a bit too trusting that the
opclass is correctly defined. Add some ereport(ERROR)s for cases where
mandatory support procedures are not defined, transforming the crashes
into errors.
The particular case that was reported is an incomplete opclass in
PostGIS.
Backpatch all the way down to 13.
Reported-by: Tobias Wendorff <tobias.wendorff@tu-dortmund.de>
Diagnosed-by: David Rowley <dgrowleyml@gmail.com>
Reviewed-by: Tomas Vondra <tomas@vondra.me>
Discussion: https://postgr.es/m/fb6d9a35-6c8e-4869-af80-0a4944a793a4@tu-dortmund.de
Many STRICT function calls will have one or two arguments, in which
case we can speed up checking for NULL input by avoiding setting up
a loop over the arguments. This adds EEOP_FUNCEXPR_STRICT_1 and the
corresponding EEOP_FUNCEXPR_STRICT_2 for functions with one and two
arguments respectively.
Author: Andres Freund <andres@anarazel.de>
Co-authored-by: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Andreas Karlsson <andreas@proxel.se>
Discussion: https://postgr.es/m/415721CE-7D2E-4B74-B5D9-1950083BA03E@yesql.se
Discussion: https://postgr.es/m/20191023163849.sosqbfs5yenocez3@alap3.anarazel.de
Knowing when the side-effects of an expression is the intended result
of the execution, rather than the returnvalue, is important for being
able generate more efficient JITed code. This replaces EEOP_DONE with
two new steps: EEOP_DONE_RETURN and EEOP_DONE_NO_RETURN. Expressions
which return a value should use the former step; expressions used for
their side-effects which don't return value should use the latter.
Author: Andres Freund <andres@anarazel.de>
Co-authored-by: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Andreas Karlsson <andreas@proxel.se>
Discussion: https://postgr.es/m/415721CE-7D2E-4B74-B5D9-1950083BA03E@yesql.se
Discussion: https://postgr.es/m/20191023163849.sosqbfs5yenocez3@alap3.anarazel.de
This change is harmless and does not affect the existing intended
operation. It is necessary for a subsequent patch operation (NOT
ENFORCED foreign keys), where we may need to change the child
constraint to enforced. In this case, we would create the necessary
triggers and queue the constraint for validation, so it is important
to remove any unnecessary constraints before proceeding.
This is a small change that could have been included in the previous
"split tryAttachPartitionForeignKey" refactoring patch (commit
1d26c2d2c4b), but was kept separate to highlight the changes.
Author: Amul Sul <amul.sul@enterprisedb.com>
Reviewed-by: Alexandra Wang <alexandra.wang.oss@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/CAAJ_b962c5AcYW9KUt_R_ER5qs3fUGbe4az-SP-vuwPS-w-AGA%40mail.gmail.com
Split tryAttachPartitionForeignKey() into three functions:
AttachPartitionForeignKey(), RemoveInheritedConstraint(), and
DropForeignKeyConstraintTriggers(), so they can be reused in some
subsequent patches for the NOT ENFORCED feature.
Author: Amul Sul <amul.sul@enterprisedb.com>
Reviewed-by: Alexandra Wang <alexandra.wang.oss@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/CAAJ_b962c5AcYW9KUt_R_ER5qs3fUGbe4az-SP-vuwPS-w-AGA%40mail.gmail.com
This commit adds per-backend WAL statistics, providing the same
information as pg_stat_wal, except that it is now possible to know how
much WAL activity is happening in each backend rather than an overall
aggregate of all the activity. Like pg_stat_wal, the implementation
relies on pgWalUsage, tracking the difference of activity between two
reports to pgstats.
This data can be retrieved with a new system function called
pg_stat_get_backend_wal(), that returns one tuple based on the PID
provided in input. Like pg_stat_get_backend_io(), this is useful when
joined with pg_stat_activity to get a live picture of the WAL generated
for each running backend, showing how the activity is [un]balanced.
pgstat_flush_backend() gains a new flag value, able to control the flush
of the WAL stats.
This commit relies mostly on the infrastructure provided by
9aea73fc61d4, that has introduced backend statistics.
Bump catalog version. A bump of PGSTAT_FILE_FORMAT_ID is not required,
as backend stats do not persist on disk.
Author: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Nazir Bilal Yavuz <byavuz81@gmail.com>
Reviewed-by: Xuneng Zhou <xunengzhou@gmail.com>
Discussion: https://postgr.es/m/Z3zqc4o09dM/Ezyz@ip-10-97-1-34.eu-west-3.compute.internal
When log_error_verbosity=verbose is configured the test would hand (and then
fail), because of the sqlstate being added between log level and message. Make
regex cope.
Reported-by: Andrew Dunstan <andrew@dunslane.net>
Discussion: https://postgr.es/m/c7ba6bd0-3701-43d1-9087-017777fe9cd2%40dunslane.net
This fixes a thinko from commit d611f8b15. The intent was to prevent
updating the stats of the pre-existing heap if autovacuum is off,
but it also disabled updating the stats of the just-created index.
There is AFAICS no good reason to do the latter, since there could not
be any pre-existing stats to refrain from overwriting, and the zeroed
stats that are there to begin with are very unlikely to be useful.
Moreover, the change broke our cross-version upgrade tests again.
Author: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/1116282.1741374848@sss.pgh.pa.us
The function calls GetLatestSnapshot() to acquire a fresh snapshot,
makes it active, and was meant to pass it to table_tuple_lock(), but
instead called GetLatestSnapshot() again to acquire yet another
snapshot. It was harmless because the heap AM and all other known
table AMs ignore the 'snapshot' argument anyway, but let's be tidy.
In the long run, this perhaps should be redesigned so that snapshot
was not needed in the first place. The table AM API uses TID +
snapshot as the unique identifier for the row version, which is
questionable when the row came from an index scan with a Dirty
snapshot. You might lock a different row version when you use a
different snapshot in the table_tuple_lock() call (a fresh MVCC
snapshot) than in the index scan (DirtySnapshot). However, in the heap
AM and other AMs where the TID alone identifies the row version, it
doesn't matter. So for now, just fix the obvious albeit harmless bug.
This has been wrong ever since the table AM API was introduced in
commit 5db6df0c01, so backpatch to all supported versions.
Discussion: https://www.postgresql.org/message-id/83d243d6-ad8d-4307-8b51-2ee5844f6230@iki.fi
Backpatch-through: 13
Recognizing the real-life complexity where columns in the table often have
functional dependencies, PostgreSQL's estimation of the number of distinct
values over a set of columns can be underestimated (or much rarely,
overestimated) when dealing with multi-clause JOIN. In the case of hash
join, it can end up with a small number of predicted hash buckets and, as
a result, picking non-optimal merge join.
To improve the situation, we introduce one additional stage of bucket size
estimation - having two or more join clauses estimator lookup for extended
statistics and use it for multicolumn estimation. Clauses are grouped into
lists, each containing expressions referencing the same relation. The result
of the multicolumn estimation made over such a list is combined with others
according to the caller's logic. Clauses that are not estimated are returned
to the caller for further estimation.
Discussion: https://postgr.es/m/52257607-57f6-850d-399a-ec33a654457b%40postgrespro.ru
Author: Andrei Lepikhov <lepihov@gmail.com>
Reviewed-by: Andy Fan <zhihui.fan1213@gmail.com>
Reviewed-by: Tomas Vondra <tomas.vondra@enterprisedb.com>
Reviewed-by: Alena Rybakina <lena.ribackina@yandex.ru>
Reviewed-by: Alexander Korotkov <aekorotkov@gmail.com>
This change is dedicated to more active usage of IndexScan and parameterized
NestLoop paths in partitioned cases under an Append node, as it already works
with plain tables. As newly added regression tests demonstrate, it should
provide more smartness to the partitionwise technique.
With an indication of how many tuples are needed, it may be more meaningful
to use the 'fractional branch' subpaths of the Append path list, which are
more optimal for this specific number of tuples. Planning on a higher level,
if the optimizer needs all the tuples, it will choose non-fractional paths.
In the case when, during execution, Append needs to return fewer tuples than
declared by tuple_fraction, it would not be harmful to use the 'intermediate'
variant of paths. However, it will earn a considerable profit if a sensible
set of tuples is selected.
The change of the existing regression test demonstrates the positive outcome
of this feature: instead of scanning the whole table, the optimizer prefers
to use a parameterized scan, being aware of the only single tuple the join
has to produce to perform the query.
Discussion: https://www.postgresql.org/message-id/flat/CAN-LCVPxnWB39CUBTgOQ9O7Dd8DrA_tpT1EY3LNVnUuvAX1NjA%40mail.gmail.com
Author: Nikita Malakhov <hukutoc@gmail.com>
Author: Andrei Lepikhov <lepihov@gmail.com>
Reviewed-by: Andy Fan <zhihuifan1213@163.com>
Reviewed-by: Alexander Korotkov <aekorotkov@gmail.com>
