This commit adds per-backend WAL statistics, providing the same
information as pg_stat_wal, except that it is now possible to know how
much WAL activity is happening in each backend rather than an overall
aggregate of all the activity. Like pg_stat_wal, the implementation
relies on pgWalUsage, tracking the difference of activity between two
reports to pgstats.
This data can be retrieved with a new system function called
pg_stat_get_backend_wal(), that returns one tuple based on the PID
provided in input. Like pg_stat_get_backend_io(), this is useful when
joined with pg_stat_activity to get a live picture of the WAL generated
for each running backend, showing how the activity is [un]balanced.
pgstat_flush_backend() gains a new flag value, able to control the flush
of the WAL stats.
This commit relies mostly on the infrastructure provided by
9aea73fc61, that has introduced backend statistics.
Bump catalog version. A bump of PGSTAT_FILE_FORMAT_ID is not required,
as backend stats do not persist on disk.
Author: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Nazir Bilal Yavuz <byavuz81@gmail.com>
Reviewed-by: Xuneng Zhou <xunengzhou@gmail.com>
Discussion: https://postgr.es/m/Z3zqc4o09dM/Ezyz@ip-10-97-1-34.eu-west-3.compute.internal
This fixes a thinko from commit d611f8b15. The intent was to prevent
updating the stats of the pre-existing heap if autovacuum is off,
but it also disabled updating the stats of the just-created index.
There is AFAICS no good reason to do the latter, since there could not
be any pre-existing stats to refrain from overwriting, and the zeroed
stats that are there to begin with are very unlikely to be useful.
Moreover, the change broke our cross-version upgrade tests again.
Author: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/1116282.1741374848@sss.pgh.pa.us
The function calls GetLatestSnapshot() to acquire a fresh snapshot,
makes it active, and was meant to pass it to table_tuple_lock(), but
instead called GetLatestSnapshot() again to acquire yet another
snapshot. It was harmless because the heap AM and all other known
table AMs ignore the 'snapshot' argument anyway, but let's be tidy.
In the long run, this perhaps should be redesigned so that snapshot
was not needed in the first place. The table AM API uses TID +
snapshot as the unique identifier for the row version, which is
questionable when the row came from an index scan with a Dirty
snapshot. You might lock a different row version when you use a
different snapshot in the table_tuple_lock() call (a fresh MVCC
snapshot) than in the index scan (DirtySnapshot). However, in the heap
AM and other AMs where the TID alone identifies the row version, it
doesn't matter. So for now, just fix the obvious albeit harmless bug.
This has been wrong ever since the table AM API was introduced in
commit 5db6df0c01, so backpatch to all supported versions.
Discussion: https://www.postgresql.org/message-id/83d243d6-ad8d-4307-8b51-2ee5844f6230@iki.fi
Backpatch-through: 13
Recognizing the real-life complexity where columns in the table often have
functional dependencies, PostgreSQL's estimation of the number of distinct
values over a set of columns can be underestimated (or much rarely,
overestimated) when dealing with multi-clause JOIN. In the case of hash
join, it can end up with a small number of predicted hash buckets and, as
a result, picking non-optimal merge join.
To improve the situation, we introduce one additional stage of bucket size
estimation - having two or more join clauses estimator lookup for extended
statistics and use it for multicolumn estimation. Clauses are grouped into
lists, each containing expressions referencing the same relation. The result
of the multicolumn estimation made over such a list is combined with others
according to the caller's logic. Clauses that are not estimated are returned
to the caller for further estimation.
Discussion: https://postgr.es/m/52257607-57f6-850d-399a-ec33a654457b%40postgrespro.ru
Author: Andrei Lepikhov <lepihov@gmail.com>
Reviewed-by: Andy Fan <zhihui.fan1213@gmail.com>
Reviewed-by: Tomas Vondra <tomas.vondra@enterprisedb.com>
Reviewed-by: Alena Rybakina <lena.ribackina@yandex.ru>
Reviewed-by: Alexander Korotkov <aekorotkov@gmail.com>
This change is dedicated to more active usage of IndexScan and parameterized
NestLoop paths in partitioned cases under an Append node, as it already works
with plain tables. As newly added regression tests demonstrate, it should
provide more smartness to the partitionwise technique.
With an indication of how many tuples are needed, it may be more meaningful
to use the 'fractional branch' subpaths of the Append path list, which are
more optimal for this specific number of tuples. Planning on a higher level,
if the optimizer needs all the tuples, it will choose non-fractional paths.
In the case when, during execution, Append needs to return fewer tuples than
declared by tuple_fraction, it would not be harmful to use the 'intermediate'
variant of paths. However, it will earn a considerable profit if a sensible
set of tuples is selected.
The change of the existing regression test demonstrates the positive outcome
of this feature: instead of scanning the whole table, the optimizer prefers
to use a parameterized scan, being aware of the only single tuple the join
has to produce to perform the query.
Discussion: https://www.postgresql.org/message-id/flat/CAN-LCVPxnWB39CUBTgOQ9O7Dd8DrA_tpT1EY3LNVnUuvAX1NjA%40mail.gmail.com
Author: Nikita Malakhov <hukutoc@gmail.com>
Author: Andrei Lepikhov <lepihov@gmail.com>
Reviewed-by: Andy Fan <zhihuifan1213@163.com>
Reviewed-by: Alexander Korotkov <aekorotkov@gmail.com>
Per POSIX, a caller of strtol() that wishes to check for errors must
set errno to 0 beforehand. Several places in spell.c neglected that,
so that they risked delivering a false overflow error in case errno
had been ERANGE already. Given the lack of field reports, this case
may be unreachable at present --- but it's surely trouble waiting to
happen, so fix it.
Author: Jacob Brazeal <jacob.brazeal@gmail.com>
Discussion: https://postgr.es/m/CA+COZaBhsq6EromFm+knMJfzK6nTpG23zJ+K2=nfUQQXcj_xcQ@mail.gmail.com
Backpatch-through: 13
Teach parallel nbtree index scans to use an LWLock (not a spinlock) to
protect the scan's shared descriptor state.
Preparation for an upcoming patch that will add skip scan optimizations
to nbtree. That patch will create the need to occasionally allocate
memory while the scan descriptor is locked, while copying datums that
were serialized by another backend.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Matthias van de Meent <boekewurm+postgres@gmail.com>
Discussion: https://postgr.es/m/CAH2-Wz=PKR6rB7qbx+Vnd7eqeB5VTcrW=iJvAsTsKbdG+kW_UA@mail.gmail.com
The callback pgstat_backend_have_pending_cb() is used as a way for
pg_stat_report() to detect if there is any pending data for backend
statistics.
It did not include a check based on pgstat_tracks_backend_bktype(), that
discards processes whose backend types do not support backend
statistics. The logic is not a problem on HEAD, as processes that do
not support backend statistics cannot touch PendingBackendStats, so the
callback would always report that there is no pending data in this case.
However, we would run into trouble once backend statistics include
portions of pending stats that are not always zeroed, like pgWalUsage.
There is no reason for pgstat_backend_have_pending_cb() to not check
for pgstat_tracks_backend_bktype(), anyway, and this pattern is safer in
the long run, so let's update the code to do so.
While on it, this commit adds a proper initialization to
PendingBackendStats.
Author: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Co-authored-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/Z8l6EMM4ImVoWRkg@ip-10-97-1-34.eu-west-3.compute.internal
If a GIN index search had a lot of search keys (for example,
"jsonbcol ?| array[]" with tens of thousands of array elements),
both ginFillScanKey() and startScanKey() took O(N^2) time.
Worse, those loops were uncancelable for lack of CHECK_FOR_INTERRUPTS.
The problem in ginFillScanKey() is the brute-force search key
de-duplication done in ginFillScanEntry(). The most expedient
solution seems to be to just stop trying to de-duplicate once
there are "too many" search keys. We could imagine working harder,
say by using a sort-and-unique algorithm instead of brute force
compare-all-the-keys. But it seems unlikely to be worth the trouble.
There is no correctness issue here, since the code already allowed
duplicate keys if any extra_data is present.
The problem in startScanKey() is the loop that attempts to identify
the first non-required search key. In the submitted test case, that
vainly tests all the key positions, and each iteration takes O(N)
time. One part of that is that it's reinitializing the entryRes[]
array from scratch each time, which is entirely unnecessary given
that the triConsistentFn isn't supposed to scribble on its input.
We can easily adjust the array contents incrementally instead.
The other part of it is that the triConsistentFn may itself take
O(N) time (and does in this test case). This is all extremely
brute force: in simple cases with AND or OR semantics, we could
know without any looping whatever that all or none of the keys
are required. But GIN opclasses don't have any API for exposing
that knowledge, so at least in the short run there is little to
be done about that. Put in a CHECK_FOR_INTERRUPTS so that at
least the loop is cancelable.
These two changes together resolve the primary complaint that
the test query doesn't respond promptly to cancel interrupts.
Also, while they don't completely eliminate the O(N^2) behavior,
they do provide quite a nice speedup for mid-sized examples.
Bug: #18831
Reported-by: Niek <niek.brasa@hitachienergy.com>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/18831-e845ac44ebc5dd36@postgresql.org
Backpatch-through: 13
On change of publication via ALTER PUBLICATION ... SET/ADD/DROP commands,
we were invalidating all the relations present in relation sync cache
maintained by pgoutput. We need to invalidate only the relation entries
that are changed as part of publication DDL.
We have ensured that the publication DDL execution generated the
invalidations required to invalidate impacted relation sync entries in
RelationSyncCache.
This improves the performance by avoiding building the cache entries for
the cases where a publication has many tables but only one of them is
dropped.
Author: Shlok Kyal <shlok.kyal.oss@gmail.com>
Author: Hayato Kuroda <kuroda.hayato@fujitsu.com>
Reviewed-by: Hou Zhijie <houzj.fnst@fujitsu.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Discussion: https://postgr.es/m/OSCPR01MB14966C09AA201EFFA706576A7F5C92@OSCPR01MB14966.jpnprd01.prod.outlook.com
This commit adds two improvements related to the monitoring of WAL
writes for the WAL receiver.
First, write counts and timings are now counted in pg_stat_io for the
WAL receiver. These have been discarded from pg_stat_wal in
ff99918c62 due to performance concerns, related to the fact that we
still relied on an on-disk file for the stats back then, even with
track_wal_io_timing to avoid the overhead of the timestamp calculations.
This implementation is simpler than the original proposal as it is
possible to rely on the APIs of pgstat_io.c to do the job. Like the
fsync and read data, track_wal_io_timing needs to be enabled to track
the timings.
Second, a wait event is added around the pg_pwrite() call in charge of
the writes, using the exiting WAIT_EVENT_WAL_WRITE. This is useful as
the WAL receiver data is tracked in pg_stat_activity.
Reviewed-by: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Discussion: https://postgr.es/m/Z8gFnH4o3jBm5BRz@ip-10-97-1-34.eu-west-3.compute.internal
This is in preparation for splitting WaitEventSet related functions to
a separate source file. That will hide the details of WaitEventSet
from WaitLatch, so it must use an exposed function instead of
modifying WaitEventSet->exit_on_postmaster_death directly.
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://www.postgresql.org/message-id/8a507fb6-df28-49d3-81a5-ede180d7f0fb@iki.fi
This reverts commit 5ead85fbc8.
This commit shows test failures with debug_parallel_query=regress. The
underlying issue needs to be debugged, so revert for now.
An additional paramater ("strip_in_arrays") is added to these functions.
It defaults to false. If true, then null array elements are removed as
well as null valued object fields. JSON that just consists of a single
null is not affected.
Author: Florents Tselai <florents.tselai@gmail.com>
Discussion: https://postgr.es/m/4BCECCD5-4F40-4313-9E98-9E16BEB0B01D@gmail.com
Expose the count of index searches/index descents in EXPLAIN ANALYZE's
output for index scan nodes. This information is particularly useful
with scans that use ScalarArrayOp quals, where the number of index scans
isn't predictable in advance (at least not with optimizations like the
one added to nbtree by Postgres 17 commit 5bf748b8). It will also be
useful when EXPLAIN ANALYZE shows details of an nbtree index scan that
uses skip scan optimizations set to be introduced by an upcoming patch.
The instrumentation works by teaching index AMs to increment a new
nsearches counter whenever a new index search begins. The counter is
incremented at exactly the same point that index AMs must already
increment the index's pg_stat_*_indexes.idx_scan counter (we're counting
the same event, but at the scan level rather than the relation level).
The new counter is stored in the scan descriptor (IndexScanDescData),
which explain.c reaches by going through the scan node's PlanState.
This approach doesn't match the approach used when tracking other index
scan specific costs (e.g., "Rows Removed by Filter:"). It is similar to
the approach used in other cases where we must track costs that are only
readily accessible inside an access method, and not from the executor
(e.g., "Heap Blocks:" output for a Bitmap Heap Scan). It is inherently
necessary to maintain a counter that can be incremented multiple times
during a single amgettuple call (or amgetbitmap call), and directly
exposing PlanState.instrument to index access methods seems unappealing.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Tomas Vondra <tomas@vondra.me>
Reviewed-By: Robert Haas <robertmhaas@gmail.com>
Reviewed-By: Masahiro Ikeda <ikedamsh@oss.nttdata.com>
Reviewed-By: Matthias van de Meent <boekewurm+postgres@gmail.com>
Discussion: https://postgr.es/m/CAH2-Wz=PKR6rB7qbx+Vnd7eqeB5VTcrW=iJvAsTsKbdG+kW_UA@mail.gmail.com
Discussion: https://postgr.es/m/CAH2-WzkRqvaqR2CTNqTZP0z6FuL4-3ED6eQB0yx38XBNj1v-4Q@mail.gmail.com
The usual pattern for handling a signal is that the signal handler
sets a flag and calls SetLatch(MyLatch), and CHECK_FOR_INTERRUPTS() or
other code that is part of a wait loop calls another function to deal
with it. The naming of the functions involved was a bit inconsistent,
however. CHECK_FOR_INTERRUPTS() calls ProcessInterrupts() to do the
heavy-lifting, but the analogous functions in aux processes were
called HandleMainLoopInterrupts(), HandleStartupProcInterrupts(),
etc. Similarly, most subroutines of ProcessInterrupts() were called
Process*(), but some were called Handle*().
To make things less confusing, rename all the functions that are part
of the overall signal/interrupt handling system but are not executed
in a signal handler to e.g. ProcessSomething(), rather than
HandleSomething(). The "Process" prefix is now consistently used in
the non-signal-handler functions, and the "Handle" prefix in functions
that are part of signal handlers, except for some completely unrelated
functions that clearly have nothing to do with signal or interrupt
handling.
Reviewed-by: Nathan Bossart <nathandbossart@gmail.com>
Discussion: https://www.postgresql.org/message-id/8a384b26-1499-41f6-be33-64b801fb98b8@iki.fi
This allows to redefine an existing non-inheritable constraint to be
inheritable, which allows to straighten up situations with NO INHERIT
constraints so that thay can become normal constraints without having to
re-verify existing data. For existing inheritance children this may
require creating additional constraints, if they don't exist already.
It also allows to do the opposite, if only for symmetry.
Author: Suraj Kharage <suraj.kharage@enterprisedb.com>
Reviewed-by: jian he <jian.universality@gmail.com>
Discussion: https://postgr.es/m/CAF1DzPVfOW6Kk=7SSh7LbneQDJWh=PbJrEC_Wkzc24tHOyQWGg@mail.gmail.com
The WAL receiver and WAL summarizer processes gain each one a call to
pgstat_report_wal(), to make sure that they report their WAL statistics
to pgstats, gathering data for pg_stat_io.
In the WAL receiver, the stats reports are timed with status updates sent
to the primary, that depend on wal_receiver_status_interval and
wal_receiver_timeout. This is a conservative choice, but perhaps we
could be more aggressive with the frequency of the stats reports. An
interesting historical fact is that the WAL receiver does writes and
syncs of WAL, but it has never reported its statistics to pgstats in
pg_stat_wal.
In the WAL summarizer, the stats reports are done each time the process
waits for WAL.
While on it, pg_stat_io is adjusted so as these two processes do not
report any rows when IOObject is not WAL, making the view easier to use
with less rows.
Two tests are added in TAP, checking statistics for the WAL summarizer
and the WAL receiver. Status updates in the WAL receiver are currently
possible in the recovery test 001_stream_rep.pl.
Reviewed-by: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Discussion: https://postgr.es/m/Z8UKZyVSHUUQJHNb@paquier.xyz
Index builds are expected to respect maintenance_work_mem, just like
other maintenance operations. For serial builds this is done simply by
flushing the buffer in ginBuildCallback() into the index. But with
parallel builds it's more complicated, because there are multiple places
that can allocate memory.
ginBuildCallbackParallel() does the same thing as ginBuildCallback(),
except that the accumulated items are written into tuplesort. Then the
entries with the same key get merged - first in the worker, then in the
leader - and the TID lists may get (arbitrarily) long. It's unlikely it
would exceed the memory limit, but it's possible. We address this by
evicting some of the data if the list gets too long.
We can't simply dump the whole in-memory TID list. The GIN index bulk
insert code expects to see TIDs in monotonic order; it may fail if the
TIDs go backwards. If the TID lists overlap, evicting the whole current
TID list would break this (a later entry might add "old" TID values into
the already-written part).
In the workers this is not an issue, because the lists never overlap.
But the leader may see overlapping lists produced by the workers.
We can however derive a safe "horizon" TID - the entries (for a given
key) are sorted by (key, first TID), which means no future list can add
values before the last "first TID" we've seen. This patch tracks the
"frozen" part of the TID list, which we know can't change by merging
additional TID lists. If needed, we can evict this part of the list.
We don't want to do this too often - the smaller lists we evict, the
more expensive it'll be to merge them in the next step (especially in
the leader). Therefore we only trim the list if we have at least 1024
frozen items, and if the whole list is at least 64kB large.
These thresholds are somewhat arbitrary and conservative. We might
calculate the values from maintenance_work_mem, but tests show that does
not really improve anything (time, compression ratio, ...). So we stick
to these conservative values to release memory faster.
Author: Tomas Vondra
Reviewed-by: Matthias van de Meent, Andy Fan, Kirill Reshke
Discussion: https://postgr.es/m/6ab4003f-a8b8-4d75-a67f-f25ad98582dc%40enterprisedb.com
This bogus error message was introduced in 2013 by commit f177cbfe67,
because of misunderstanding the processCASbits() API; at the time, no
test cases were added that would be affected by this change. Only in
ca87c415e2 was one added (along with a couple of typos), with an XXX
note that the error message was bogus. Fix the whole, add some test
cases.
Backpatch all the way back.
Reviewed-by: Nathan Bossart <nathandbossart@gmail.com>
Discussion: https://postgr.es/m/202503041822.aobpqke3igvb@alvherre.pgsql
When serializing GIN tuples to tuplesorts during parallel index builds,
we can significantly reduce the amount of data by compressing the TID
lists. The GIN opclasses may produce a lot of data (depending on how
many keys are extracted from each row), and the TID compression is very
efficient and effective.
If the number of distinct keys is high, the first worker pass (reading
data from the table and writing them into a private tuplesort) may not
benefit from the compression very much. It is likely to spill data to
disk before the TID lists get long enough for the compression to help.
The second pass (writing the merged data into the shared tuplesort) is
more likely to benefit from compression.
The compression can be seen as a way to reduce the amount of disk space
needed by the parallel builds, because the data is written twice. First
into the per-worker tuplesorts, then into the shared tuplesort.
Author: Tomas Vondra
Reviewed-by: Matthias van de Meent, Andy Fan, Kirill Reshke
Discussion: https://postgr.es/m/6ab4003f-a8b8-4d75-a67f-f25ad98582dc%40enterprisedb.com
The FP_LOCK_SLOTS_PER_BACKEND macro looks like a constant, but it
depends on the max_locks_per_transaction GUC, and thus can change. This
is non-obvious and confusing, so make it look more like a function by
renaming it to FastPathLockSlotsPerBackend().
While at it, use the macro when initializing fast-path shared memory,
instead of using the formula.
Reported-by: Andres Freund
Discussion: https://postgr.es/m/ffiwtzc6vedo6wb4gbwelon5nefqg675t5c7an2ta7pcz646cg%40qwmkdb3l4ett
Commit bc971f4025 replaced the latch-setting mechanism that the
comment talked about with a condition variable. And before that,
commit 2258e76f90 moved the code so that the comment got detached from
the loop that it talked about, so move the comment closer to the loop.
demo:
CREATE TABLE gtest20a (a int PRIMARY KEY, b int GENERATED ALWAYS AS (a * 2) VIRTUAL);
ALTER TABLE gtest20a ADD COLUMN c float8 DEFAULT RANDOM() CHECK (b < 60);
ERROR: no generation expression found for column number 2 of table "pg_temp_17306"
In ATRewriteTable, the variable OIDNewHeap (if valid) corresponding
pg_attrdef default expression entry was not populated. So OIDNewHeap
cannot be used to call expand_generated_columns_in_expr or
build_generation_expression. Therefore in ATRewriteTable, we can only
use the existing relation to expand the generated expression.
Author: jian he <jian.universality@gmail.com>
Reviewed-by: Srinath Reddy <srinath2133@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/CACJufxEJ%3DFoajabWXjszo_yrQeKSxdZ87KJqBW373rSbajKGAA%40mail.gmail.com
In commit b262ad440, we introduced an optimization that reduces an IS
NOT NULL qual on a column defined as NOT NULL to constant true, and an
IS NULL qual on a NOT NULL column to constant false, provided we can
prove that the input expression of the NullTest is not nullable by any
outer join. This deduction happens after we have generated multiple
clones of the same qual condition to cope with commuted-left-join
cases.
However, performing the NullTest deduction for clone clauses can be
unsafe, because we don't have a reliable way to determine if the input
expression of a NullTest is non-nullable: nullingrel bits in clone
clauses may not reflect reality, so we dare not draw conclusions from
clones about whether Vars are guaranteed not-null.
To fix, we check whether the given RestrictInfo is a clone clause in
restriction_is_always_true and restriction_is_always_false, and avoid
performing any reduction if it is.
There are several ensuing plan changes in predicate.out, and we have
to modify the tests to ensure that they continue to test what they are
intended to. Additionally, this fix causes the test case added in
f00ab1fd1 to no longer trigger the bug that commit fixed, so we also
remove that test case.
Back-patch to v17 where this bug crept in.
Reported-by: Ronald Cruz <cruz@rentec.com>
Diagnosed-by: Tom Lane <tgl@sss.pgh.pa.us>
Author: Richard Guo <guofenglinux@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/f5320d3d-77af-4ce8-b9c3-4715ff33f213@rentec.com
Backpatch-through: 17
pgstat_bestart(), used post-authentication to set up a backend entry
in the PgBackendStatus array, so as its data becomes visible in
pg_stat_activity and related catalogs, has its logic divided into three
routines with this commit, called in order at different steps of the
backend initialization:
* pgstat_bestart_initial() sets up the backend entry with a minimal
amount of information, reporting it with a new BackendState called
STATE_STARTING while waiting for backend initialization and client
authentication to complete. The main benefit that this offers is
observability, so as it is possible to monitor the backend activity
during authentication. This step happens earlier than in the logic
prior to this commit. pgstat_beinit() happens earlier as well, before
authentication.
* pgstat_bestart_security() reports the SSL/GSS status of the
connection, once authentication completes. Auxiliary processes, for
example, do not need to call this step, hence it is optional. This
step is called after performing authentication, same as previously.
* pgstat_bestart_final() reports the user and database IDs, takes the
entry out of STATE_STARTING, and reports its application_name. This is
called as the last step of the three, once authentication completes.
An injection point is added, with a test checking that the "starting"
phase of a backend entry is visible in pg_stat_activity. Some follow-up
patches are planned to take advantage of this refactoring with more
information provided in backend entries during authentication (LDAP
hanging was a problem for the author, initially).
Author: Jacob Champion <jacob.champion@enterprisedb.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CAOYmi+=60deN20WDyCoHCiecgivJxr=98s7s7-C8SkXwrCfHXg@mail.gmail.com
palloc() includes an assertion checking that an alloc() implementation
never returns NULL for all MemoryContextMethods.
This commit adds a similar assertion in palloc0(). In palloc_extend(),
a different assertion is added, checking that MCXT_ALLOC_NO_OOM is set
when an alloc() routine returns NULL. These additions can be useful to
catch errors when implementing a new set of MemoryContextMethods
routines.
Author: Andreas Karlsson <andreas@proxel.se>
Discussion: https://postgr.es/m/507e8eba-2035-4a12-a777-98199a66beb8@proxel.se
Calculate the insert threshold for triggering an autovacuum of a
relation based on the number of unfrozen pages.
By only considering the unfrozen portion of the table when calculating
how many tuples to add to the insert threshold, we can trigger more
frequent vacuums of insert-heavy tables. This increases the chances of
vacuuming those pages when they still reside in shared buffers
This also increases the number of autovacuums triggered by tuples
inserted and not by wraparound risk. We prefer to freeze these pages
during insert-triggered autovacuums, as anti-wraparound vacuums are not
automatically canceled by conflicting lock requests.
We calculate the unfrozen percentage of the table using the recently
added (99f8f3fbbc) relallfrozen column of pg_class.
Author: Melanie Plageman <melanieplageman@gmail.com>
Reviewed-by: Nathan Bossart <nathandbossart@gmail.com>
Reviewed-by: Greg Sabino Mullane <htamfids@gmail.com>
Reviewed-by: Robert Treat <rob@xzilla.net>
Reviewed-by: wenhui qiu <qiuwenhuifx@gmail.com>
Discussion: https://postgr.es/m/flat/CAAKRu_aj-P7YyBz_cPNwztz6ohP%2BvWis%3Diz3YcomkB3NpYA--w%40mail.gmail.com
DefineRelation was of the opinion that it could usefully pre-fill
atthasdef flags to eliminate work for StoreAttrDefault. This is not
the case, however: the tupledesc that it's filling is not the one that
InsertPgAttributeTuples will work from. The tupledesc used there is
made by RelationBuildLocalRelation, which deliberately doesn't copy
atthasdef. Moreover, if this did happen as the code thinks, it would
be wrong for the case of plain "DEFAULT NULL" clauses, since we detect
and ignore simple-null-Const defaults later on. Hence, remove the
useless code.
It also emerges that it's not really worth a special-case path in
StoreAttrDefault() for atthasdef already being set, because as far as
we can see that never happens: cases where an existing default gets
updated always do RemoveAttrDefault first, so as to clean up
possibly-no-longer-correct dependency entries. If it were the case
the code would still work, anyway.
Also remove a nearby comment made moot by 5eaa0e92e.
Author: jian he <jian.universality@gmail.com>
Discussion: https://postgr.es/m/CACJufxHFssPvkP1we7WMhPD_1kwgbG52o=kQgL+TnVoX5LOyCQ@mail.gmail.com
If a domain type has a default, adding a column of that type (without
any explicit DEFAULT clause) failed to install the domain's default
value in existing rows, instead leaving the new column null. This
is unexpected, and it used to work correctly before v11. The cause
is confusion in the atthasmissing mechanism about which default value
to install: we'd only consider installing an explicitly-specified
default, and then we'd decide that no table rewrite is needed.
To fix, take the responsibility for filling attmissingval out of
StoreAttrDefault, and instead put it into ATExecAddColumn's existing
logic that derives the correct value to fill the new column with.
Also, centralize the logic that determines the need for
default-related table rewriting there, instead of spreading it over
four or five places.
In the back branches, we'll leave the attmissingval-filling code
in StoreAttrDefault even though it's now dead, for fear that some
extension may be depending on that functionality to exist there.
A separate HEAD-only patch will clean up the now-useless code.
Reported-by: jian he <jian.universality@gmail.com>
Author: jian he <jian.universality@gmail.com>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CACJufxHFssPvkP1we7WMhPD_1kwgbG52o=kQgL+TnVoX5LOyCQ@mail.gmail.com
Backpatch-through: 13
Add relallfrozen, an estimate of the number of pages marked all-frozen
in the visibility map.
pg_class already has relallvisible, an estimate of the number of pages
in the relation marked all-visible in the visibility map. This is used
primarily for planning.
relallfrozen, together with relallvisible, is useful for estimating the
outstanding number of all-visible but not all-frozen pages in the
relation for the purposes of scheduling manual VACUUMs and tuning vacuum
freeze parameters.
A future commit will use relallfrozen to trigger more frequent vacuums
on insert-focused workloads with significant volume of frozen data.
Bump catalog version
Author: Melanie Plageman <melanieplageman@gmail.com>
Reviewed-by: Nathan Bossart <nathandbossart@gmail.com>
Reviewed-by: Robert Treat <rob@xzilla.net>
Reviewed-by: Corey Huinker <corey.huinker@gmail.com>
Reviewed-by: Greg Sabino Mullane <htamfids@gmail.com>
Discussion: https://postgr.es/m/flat/CAAKRu_aj-P7YyBz_cPNwztz6ohP%2BvWis%3Diz3YcomkB3NpYA--w%40mail.gmail.com
