Heikki Linnakangas had the idea of rearranging GetSnapshotData to
avoid checking for sub-XIDs when no top-level XID is present. This
patch does that plus further a bit of further, related rearrangement.
Benchmarking show a significant improvement on unlogged tables at
higher concurrency levels, and mostly indifferent result on permanent
tables (which are presumably bottlenecked elsewhere). Most of the
benefit seems to come from using the new NormalTransactionIdPrecedes()
macro rather than the function call TransactionIdPrecedes().
This speeds up snapshot-taking and reduces ProcArrayLock contention.
Also, the PGPROC (and PGXACT) structures used by two-phase commit are
now allocated as part of the main array, rather than in a separate
array, and we keep ProcArray sorted in pointer order. These changes
are intended to minimize the number of cache lines that must be pulled
in to take a snapshot, and testing shows a substantial increase in
performance on both read and write workloads at high concurrencies.
Pavan Deolasee, Heikki Linnakangas, Robert Haas
There was a timing window between when oldestActiveXid was derived
and when it should have been derived that only shows itself under
heavy load. Move code around to ensure correct timing of derivation.
No change to StartupSUBTRANS() code, which is where this failed.
Bug report by Chris Redekop
If the initial snapshot had overflowed then we can start whenever
the latest snapshot is empty, not overflowed or as we did already,
start when the xmin on primary was higher than xmax of our starting
snapshot, which proves we have full snapshot data.
Bug report by Chris Redekop
A transaction can export a snapshot with pg_export_snapshot(), and then
others can import it with SET TRANSACTION SNAPSHOT. The data does not
leave the server so there are not security issues. A snapshot can only
be imported while the exporting transaction is still running, and there
are some other restrictions.
I'm not totally convinced that we've covered all the bases for SSI (true
serializable) mode, but it works fine for lesser isolation modes.
Joachim Wieland, reviewed by Marko Tiikkaja, and rather heavily modified
by Tom Lane
There's no need to clamp the standby's xmin to be greater than
GetOldestXmin's result; if there were any such need this logic would be
hopelessly inadequate anyway, because it fails to account for
within-database versus cluster-wide values of GetOldestXmin. So get rid of
that, and just rely on sanity-checking that the xmin is not wrapped around
relative to the nextXid counter. Also, don't reset the walsender's xmin if
the current feedback xmin is indeed out of range; that just creates more
problems than we already had. Lastly, don't bother to take the
ProcArrayLock; there's no need to do that to set xmin.
Also improve the comments about this in GetOldestXmin itself.
As per my recent proposal, this refactors things so that these typedefs and
macros are available in a header that can be included in frontend-ish code.
I also changed various headers that were undesirably including
utils/timestamp.h to include datatype/timestamp.h instead. Unsurprisingly,
this showed that half the system was getting utils/timestamp.h by way of
xlog.h.
No actual code changes here, just header refactoring.
walsender.h should depend on xlog.h, not vice versa. (Actually, the
inclusion was circular until a couple hours ago, which was even sillier;
but Bruce broke it in the expedient rather than logically correct
direction.) Because of that poor decision, plus blind application of
pgrminclude, we had a situation where half the system was depending on
xlog.h to include such unrelated stuff as array.h and guc.h. Clean up
the header inclusion, and manually revert a lot of what pgrminclude had
done so things build again.
This episode reinforces my feeling that pgrminclude should not be run
without adult supervision. Inclusion changes in header files in particular
need to be reviewed with great care. More generally, it'd be good if we
had a clearer notion of module layering to dictate which headers can sanely
include which others ... but that's a big task for another day.
Perhaps we ought to add some other kind of documentation here instead,
but for now let's get rid of this woefully obsolete description of the
sinval machinery.
Instead of entering them on transaction startup, we materialize them
only when someone wants to wait, which will occur only during CREATE
INDEX CONCURRENTLY. In Hot Standby mode, the startup process must also
be able to probe for conflicting VXID locks, but the lock need never be
fully materialized, because the startup process does not use the normal
lock wait mechanism. Since most VXID locks never need to touch the
lock manager partition locks, this can significantly reduce blocking
contention on read-heavy workloads.
Patch by me. Review by Jeff Davis.
This kluge was inserted in a spot apparently chosen at random: the lock
manager's state is not yet fully set up for the wait, and in particular
LockWaitCancel hasn't been armed by setting lockAwaited, so the ProcLock
will not get cleaned up if the ereport is thrown. This seems to not cause
any observable problem in trivial test cases, because LockReleaseAll will
silently clean up the debris; but I was able to cause failures with tests
involving subtransactions.
Fixes breakage induced by commit c85c941470efc44494fd7a5f426ee85fc65c268c.
Back-patch to all affected branches.
Testing shows that the overhead of acquiring and releasing
SInvalReadLock and msgNumLock on high-core count boxes can waste a lot
of CPU time and hurt performance. This patch adds a per-backend flag
that allows us to skip all that locking in most cases. Further
testing shows that this improves performance even when sinval traffic
is very high.
Patch by me. Review and testing by Noah Misch.
In the previous coding, we would look up a relation in RangeVarGetRelid,
lock the resulting OID, and then AcceptInvalidationMessages(). While
this was sufficient to ensure that we noticed any changes to the
relation definition before building the relcache entry, it didn't
handle the possibility that the name we looked up no longer referenced
the same OID. This was particularly problematic in the case where a
table had been dropped and recreated: we'd latch on to the entry for
the old relation and fail later on. Now, we acquire the relation lock
inside RangeVarGetRelid, and retry the name lookup if we notice that
invalidation messages have been processed meanwhile. Many operations
that would previously have failed with an error in the presence of
concurrent DDL will now succeed.
There is a good deal of work remaining to be done here: many callers
of RangeVarGetRelid still pass NoLock for one reason or another. In
addition, nothing in this patch guards against the possibility that
the meaning of an unqualified name might change due to the creation
of a relation in a schema earlier in the user's search path than the
one where it was previously found. Furthermore, there's nothing at
all here to guard against similar race conditions for non-relations.
For all that, it's a start.
Noah Misch and Robert Haas
detect postmaster death. Postmaster keeps the write-end of the pipe open,
so when it dies, children get EOF in the read-end. That can conveniently
be waited for in select(), which allows eliminating some of the polling
loops that check for postmaster death. This patch doesn't yet change all
the loops to use the new mechanism, expect a follow-on patch to do that.
This changes the interface to WaitLatch, so that it takes as argument a
bitmask of events that it waits for. Possible events are latch set, timeout,
postmaster death, and socket becoming readable or writeable.
The pipe method behaves slightly differently from the kill() method
previously used in PostmasterIsAlive() in the case that postmaster has died,
but its parent has not yet read its exit code with waitpid(). The pipe
returns EOF as soon as the process dies, but kill() continues to return
true until waitpid() has been called (IOW while the process is a zombie).
Because of that, change PostmasterIsAlive() to use the pipe too, otherwise
WaitLatch() would return immediately with WL_POSTMASTER_DEATH, while
PostmasterIsAlive() would claim it's still alive. That could easily lead to
busy-waiting while postmaster is in zombie state.
Peter Geoghegan with further changes by me, reviewed by Fujii Masao and
Florian Pflug.
This warning is new in gcc 4.6 and part of -Wall. This patch cleans
up most of the noise, but there are some still warnings that are
trickier to remove.
Startup process waited for cleanup lock but when hot_standby = off
the pid was not registered, so that the bgwriter would not wake
the waiting process as intended.
contains newly-inserted tuples that according to our OldestXmin are not
yet visible to everyone. The value returned by GetOldestXmin() is conservative,
and it can move backwards on repeated calls, so if we see that contradiction
between the PD_ALL_VISIBLE flag and status of tuples on the page, we have to
assume it's because an earlier vacuum calculated a higher OldestXmin value,
and all the tuples really are visible to everyone.
We have received several reports of this bug, with the "PD_ALL_VISIBLE flag
was incorrectly set in relation ..." warning appearing in logs. We were
finally able to hunt it down with David Gould's help to run extra diagnostics
in an environment where this happened frequently.
Also reword the warning, per Robert Haas' suggestion, to not imply that the
PD_ALL_VISIBLE flag is necessarily at fault, as it might also be a symptom
of corruption on a tuple header.
Backpatch to 8.4, where the PD_ALL_VISIBLE flag was introduced.
If a standby is broadcasting reply messages and we have named
one or more standbys in synchronous_standby_names then allow
users who set synchronous_replication to wait for commit, which
then provides strict data integrity guarantees. Design avoids
sending and receiving transaction state information so minimises
bookkeeping overheads. We synchronize with the highest priority
standby that is connected and ready to synchronize. Other standbys
can be defined to takeover in case of standby failure.
This version has very strict behaviour; more relaxed options
may be added at a later date.
Simon Riggs and Fujii Masao, with reviews by Yeb Havinga, Jaime
Casanova, Heikki Linnakangas and Robert Haas, plus the assistance
of many other design reviewers.
Standby optionally sends back information about oldestXmin of queries
which is then checked and applied to the WALSender's proc->xmin.
GetOldestXmin() is modified slightly to agree with GetSnapshotData(),
so that all backends on primary include WALSender within their snapshots.
Note this does nothing to change the snapshot xmin on either master or
standby. Feedback piggybacks on the standby reply message.
vacuum_defer_cleanup_age is no longer used on standby, though parameter
still exists on primary, since some use cases still exist.
Simon Riggs, review comments from Fujii Masao, Heikki Linnakangas, Robert Haas
Until now, our Serializable mode has in fact been what's called Snapshot
Isolation, which allows some anomalies that could not occur in any
serialized ordering of the transactions. This patch fixes that using a
method called Serializable Snapshot Isolation, based on research papers by
Michael J. Cahill (see README-SSI for full references). In Serializable
Snapshot Isolation, transactions run like they do in Snapshot Isolation,
but a predicate lock manager observes the reads and writes performed and
aborts transactions if it detects that an anomaly might occur. This method
produces some false positives, ie. it sometimes aborts transactions even
though there is no anomaly.
To track reads we implement predicate locking, see storage/lmgr/predicate.c.
Whenever a tuple is read, a predicate lock is acquired on the tuple. Shared
memory is finite, so when a transaction takes many tuple-level locks on a
page, the locks are promoted to a single page-level lock, and further to a
single relation level lock if necessary. To lock key values with no matching
tuple, a sequential scan always takes a relation-level lock, and an index
scan acquires a page-level lock that covers the search key, whether or not
there are any matching keys at the moment.
A predicate lock doesn't conflict with any regular locks or with another
predicate locks in the normal sense. They're only used by the predicate lock
manager to detect the danger of anomalies. Only serializable transactions
participate in predicate locking, so there should be no extra overhead for
for other transactions.
Predicate locks can't be released at commit, but must be remembered until
all the transactions that overlapped with it have completed. That means that
we need to remember an unbounded amount of predicate locks, so we apply a
lossy but conservative method of tracking locks for committed transactions.
If we run short of shared memory, we overflow to a new "pg_serial" SLRU
pool.
We don't currently allow Serializable transactions in Hot Standby mode.
That would be hard, because even read-only transactions can cause anomalies
that wouldn't otherwise occur.
Serializable isolation mode now means the new fully serializable level.
Repeatable Read gives you the old Snapshot Isolation level that we have
always had.
Kevin Grittner and Dan Ports, reviewed by Jeff Davis, Heikki Linnakangas and
Anssi Kääriäinen
All retryable conflict errors now have an error code that indicates that
a retry is possible, correcting my incomplete fix of 2010/05/12
Tatsuo Ishii and Simon Riggs, input from Robert Haas and Florian Pflug
backend, as far as the postmaster shutdown logic is concerned. That means,
fast shutdown will wait for WAL sender processes to exit before signaling
bgwriter to finish. This avoids race conditions between a base backup stopping
or starting, and bgwriter writing the shutdown checkpoint WAL record. We don't
want e.g the end-of-backup WAL record to be written after the shutdown
checkpoint.
On MacOS X, and apparently also on other BSD-derived systems, attaching
a debugger causes getppid() to return the pid of the debugging process
rather than the actual parent PID. As a result, debugging the
autovacuum launcher, startup process, or WAL sender on such systems
causes it to exit, because the previous coding of PostmasterIsAlive()
detects postmaster death by testing whether getppid() == PostmasterPid.
Work around that behavior by checking the return value of getppid()
more carefully. If it's PostmasterPid, the postmaster must be alive;
if it's 1, assume the postmaster is dead. If it's any other value,
assume we've been debugged and fall through to the less-reliable
kill() test.
Review by Tom Lane.
This prevents the word "waiting" from briefly disappearing from the ps
status line when ResolveRecoveryConflictWithVirtualXIDs begins a new
iteration of the outer loop.
Along the way, remove some useless pgstat_report_waiting() calls;
the startup process doesn't appear in pg_stat_activity.
Fujii Masao
Purely cosmetic patch to make our coding standards more consistent ---
we were doing symbolic some places and octal other places. This patch
fixes all C-coded uses of mkdir, chmod, and umask. There might be some
other calls I missed. Inconsistency noted while researching tablespace
directory permissions issue.
First, avoid scanning the whole ProcArray once we know there
are at least commit_siblings active; second, skip the check
altogether if commit_siblings = 0.
Greg Smith
an old transaction running in the master, and a lot of transactions have
started and finished since, and a WAL-record is written in the gap between
the creating the running-xacts snapshot and WAL-logging it, recovery will fail
with "too many KnownAssignedXids" error. This bug was reported by
Joachim Wieland on Nov 19th.
In the same scenario, when fewer transactions have started so that all the
xids fit in KnownAssignedXids despite the first bug, a more serious bug
arises. We incorrectly initialize the clog code with the oldest still running
transaction, and when we see the WAL record belonging to a transaction with
an XID larger than one that committed already before the checkpoint we're
recovering from, we zero the clog page containing the already committed
transaction, leading to data loss.
In hindsight, trying to track xids in the known-assigned-xids array before
seeing the running-xacts record was too complicated. To fix that, hold
XidGenLock while the running-xacts snapshot is taken and WAL-logged. That
ensures that no transaction can begin or end in that gap, so that in recvoery
we know that the snapshot contains all transactions running at that point in
WAL.
removing an infrequently occurring race condition in Hot Standby.
An xid must be assigned before a lock appears in shared memory,
rather than immediately after, else GetRunningTransactionLocks()
may see InvalidTransactionId, causing assertion failures during
lock processing on standby.
Bug report and diagnosis by Fujii Masao, fix by me.
Similar conflicts were already avoided for related record types.
Massive over-caution resulted in a usability bug. Clear theoretical
basis for doing this is now confirmed by me.
Request to remove from Heikki (twice), over-caution by me.
dynamic pool of event handles, we can permanently assign one for each
shared latch. Thanks to that, we no longer need a separate shared memory
block for latches, and we don't need to know in advance how many shared
latches there is, so you no longer need to remember to update
NumSharedLatches when you introduce a new latch to the system.
wait until it is set. Latches can be used to reliably wait until a signal
arrives, which is hard otherwise because signals don't interrupt select()
on some platforms, and even when they do, there's race conditions.
On Unix, latches use the so called self-pipe trick under the covers to
implement the sleep until the latch is set, without race conditions. On
Windows, Windows events are used.
Use the new latch abstraction to sleep in walsender, so that as soon as
a transaction finishes, walsender is woken up to immediately send the WAL
to the standby. This reduces the latency between master and standby, which
is good.
Preliminary work by Fujii Masao. The latch implementation is by me, with
helpful comments from many people.
There is no reason that proc.c should have to get involved in this dirty hack
for letting the postmaster know which children are walsenders. Revert that
file to the way it was, and confine the kluge to pmsignal.c and postmaster.c.
Per gripe from Fujii Masao, though this is not exactly his proposed patch.
Categorize as DEVELOPER_OPTIONS and set context PGC_SIGHUP, as per Fujii,
but set the default to LOG because higher values aren't really sensible
(see the code for trace_recovery()). Fix the documentation to agree with
the code and to try to explain what the variable actually does. Get rid
of no-op calls trace_recovery(LOG), which accomplish nothing except to
demonstrate that this option confuses even its author.
to have different values in different processes of the primary server.
Also put it into the "Streaming Replication" GUC category; it doesn't belong
in "Standby Servers" because you use it on the master not the standby.
In passing also correct guc.c's idea of wal_keep_segments' category.
max_standby_streaming_delay, and revise the implementation to avoid assuming
that timestamps found in WAL records can meaningfully be compared to clock
time on the standby server. Instead, the delay limits are compared to the
elapsed time since we last obtained a new WAL segment from archive or since
we were last "caught up" to WAL data arriving via streaming replication.
This avoids problems with clock skew between primary and standby, as well
as other corner cases that the original coding would misbehave in, such
as the primary server having significant idle time between transactions.
Per my complaint some time ago and considerable ensuing discussion.
Do some desultory editing on the hot standby documentation, too.
