Don't move parenthesized lines to the left, even if that means they
flow past the right margin.
By default, BSD indent lines up statement continuation lines that are
within parentheses so that they start just to the right of the preceding
left parenthesis. However, traditionally, if that resulted in the
continuation line extending to the right of the desired right margin,
then indent would push it left just far enough to not overrun the margin,
if it could do so without making the continuation line start to the left of
the current statement indent. That makes for a weird mix of indentations
unless one has been completely rigid about never violating the 80-column
limit.
This behavior has been pretty universally panned by Postgres developers.
Hence, disable it with indent's new -lpl switch, so that parenthesized
lines are always lined up with the preceding left paren.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
Change pg_bsd_indent to follow upstream rules for placement of comments
to the right of code, and remove pgindent hack that caused comments
following #endif to not obey the general rule.
Commit e3860ffa4dd0dad0dd9eea4be9cc1412373a8c89 wasn't actually using
the published version of pg_bsd_indent, but a hacked-up version that
tried to minimize the amount of movement of comments to the right of
code. The situation of interest is where such a comment has to be
moved to the right of its default placement at column 33 because there's
code there. BSD indent has always moved right in units of tab stops
in such cases --- but in the previous incarnation, indent was working
in 8-space tab stops, while now it knows we use 4-space tabs. So the
net result is that in about half the cases, such comments are placed
one tab stop left of before. This is better all around: it leaves
more room on the line for comment text, and it means that in such
cases the comment uniformly starts at the next 4-space tab stop after
the code, rather than sometimes one and sometimes two tabs after.
Also, ensure that comments following #endif are indented the same
as comments following other preprocessor commands such as #else.
That inconsistency turns out to have been self-inflicted damage
from a poorly-thought-through post-indent "fixup" in pgindent.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
Previously, auxiliary processes and background workers not connected
to a database (such as the logical replication launcher) weren't
shown. Include them, so that we can see the associated wait state
information. Add a new column to identify the processes type, so that
people can filter them out easily using SQL if they wish.
Before this patch was written, there was discussion about whether we
should expose this information in a separate view, so as to avoid
contaminating pg_stat_activity with things people might not want to
see. But putting everything in pg_stat_activity was a more popular
choice, so that's what the patch does.
Kuntal Ghosh, reviewed by Amit Langote and Michael Paquier. Some
revisions and bug fixes by me.
Discussion: http://postgr.es/m/CA+TgmoYES5nhkEGw9nZXU8_FhA8XEm8NTm3-SO+3ML1B81Hkww@mail.gmail.com
Doing so doesn't seem to be within the purpose of the per user
connection limits, and has particularly unfortunate effects in
conjunction with parallel queries.
Backpatch to 9.6 where parallel queries were introduced.
David Rowley, reviewed by Robert Haas and Albe Laurenz.
I found that half a dozen (nearly 5%) of our AllocSetContextCreate calls
had typos in the context-sizing parameters. While none of these led to
especially significant problems, they did create minor inefficiencies,
and it's now clear that expecting people to copy-and-paste those calls
accurately is not a great idea. Let's reduce the risk of future errors
by introducing single macros that encapsulate the common use-cases.
Three such macros are enough to cover all but two special-purpose contexts;
those two calls can be left as-is, I think.
While this patch doesn't in itself improve matters for third-party
extensions, it doesn't break anything for them either, and they can
gradually adopt the simplified notation over time.
In passing, change TopMemoryContext to use the default allocation
parameters. Formerly it could only be extended 8K at a time. That was
probably reasonable when this code was written; but nowadays we create
many more contexts than we did then, so that it's not unusual to have a
couple hundred K in TopMemoryContext, even without considering various
dubious code that sticks other things there. There seems no good reason
not to let it use growing blocks like most other contexts.
Back-patch to 9.6, mostly because that's still close enough to HEAD that
it's easy to do so, and keeping the branches in sync can be expected to
avoid some future back-patching pain. The bugs fixed by these changes
don't seem to be significant enough to justify fixing them further back.
Discussion: <21072.1472321324@sss.pgh.pa.us>
It's harmless, but might confuse readers. Seems to have been introduced
in 6bc8ef0b7f1f1df3. Back-patch, just to avoid cosmetic cross-branch
differences.
Amit Langote
This formalizes a decision implicit in commit
4ea51cdfe85ceef8afabceb03c446574daa0ac23 and adds clean detection of
affected systems. Vendor updates are available for each such known bug.
Back-patch to 9.5, where the aforementioned commit first appeared.
Free the contexts holding this data after we're done using it, by the
expedient of attaching them to the PostmasterContext which we were
already taking care to delete (and where, indeed, this data used to live
before commits e5e2fc842c418432 and 7c45e3a3c682f855). This saves a
probably-usually-negligible amount of space per running backend. It also
avoids leaving potentially-security-sensitive data lying around in memory
in processes that don't need it. You'd have to be unusually paranoid to
think that that amounts to a live security bug, so I've not gone so far as
to forcibly zero the memory; but there surely isn't a good reason to keep
this data around.
Arguably this is a memory management bug in the aforementioned commits,
but it doesn't seem important enough to back-patch.
Avoid memory leak from incorrect choice of how to free a StringInfo
(resetStringInfo doesn't do it). Now that pg_split_opts doesn't scribble
on the optstr, mark that as "const" for clarity. Attach the commentary in
protocol.sgml to the right place, and add documentation about the
user-visible effects of this change on postgres' -o option and libpq's
PGOPTIONS option.
We should set MyProc->databaseId after acquiring the per-database lock,
not beforehand. The old way risked deadlock against processes trying to
copy or delete the target database, since they would first acquire the lock
and then wait for processes with matching databaseId to exit; that left a
window wherein an incoming process could set its databaseId and then block
on the lock, while the other process had the lock and waited in vain for
the incoming process to exit.
CountOtherDBBackends() would time out and fail after 5 seconds, so this
just resulted in an unexpected failure not a permanent lockup, but it's
still annoying when it happens. A real-world example of a use-case is that
short-duration connections to a template database should not cause CREATE
DATABASE to fail.
Doing it in the other order should be fine since the contract has always
been that processes searching the ProcArray for a database ID must hold the
relevant per-database lock while searching. Thus, this actually removes
the former race condition that required an assumption that storing to
MyProc->databaseId is atomic.
It's been like this for a long time, so back-patch to all active branches.
While a new backend nominally participates in sinval signaling starting
from the SharedInvalBackendInit call near the top of InitPostgres, it
cannot recognize sinval messages for unshared catalogs of its database
until it has set up MyDatabaseId. This is not problematic for the catcache
or relcache, which by definition won't have loaded any data from or about
such catalogs before that point. However, commit 568d4138c646cd7c
introduced a mechanism for re-using MVCC snapshots for catalog scans, and
made invalidation of those depend on recognizing relevant sinval messages.
So it's possible to establish a catalog snapshot to read pg_authid and
pg_database, then before we set MyDatabaseId, receive sinval messages that
should result in invalidating that snapshot --- but do not, because we
don't realize they are for our database. This mechanism explains the
intermittent buildfarm failures we've seen since commit 31eae6028eca4365.
That commit was not itself at fault, but it introduced a new regression
test that does reconnections concurrently with the "vacuum full pg_am"
command in vacuum.sql. This allowed the pre-existing error to be exposed,
given just the right timing, because we'd fail to update our information
about how to access pg_am. In principle any VACUUM FULL on a system
catalog could have created a similar hazard for concurrent incoming
connections. Perhaps there are more subtle failure cases as well.
To fix, force invalidation of the catalog snapshot as soon as we've
set MyDatabaseId.
Back-patch to 9.4 where the error was introduced.
Deadlock checking was performed inside signal handlers up to
now. While it's a remarkable feat to have made this work reliably,
it's quite complex to understand why that is the case. Partially it
worked due to the assumption that semaphores are signal safe - which
is not actually documented to be the case for sysv semaphores.
The reason we had to rely on performing this work inside signal
handlers is that semaphores aren't guaranteed to be interruptable by
signals on all platforms. But now that latches provide a somewhat
similar API, which actually has the guarantee of being interruptible,
we can avoid doing so.
Signalling between ProcSleep, ProcWakeup, ProcWaitForSignal and
ProcSendSignal is now done using latches. This increases the
likelihood of spurious wakeups. As spurious wakeup already were
possible and aren't likely to be frequent enough to be an actual
problem, this seems acceptable.
This change would allow for further simplification of the deadlock
checking, now that it doesn't have to run in a signal handler. But
even if I were motivated to do so right now, it would still be better
to do that separately. Such a cleanup shouldn't have to be reviewed a
the same time as the more fundamental changes in this commit.
There is one possible usability regression due to this commit. Namely
it is more likely than before that log_lock_waits messages are output
more than once.
Reviewed-By: Heikki Linnakangas
We used to handle authentication_timeout by setting
ImmediateInterruptOK to true during large parts of the authentication
phase of a new connection. While that happens to work acceptably in
practice, it's not particularly nice and has ugly corner cases.
Previous commits converted the FE/BE communication to use latches and
implemented support for interrupt handling during both
send/recv. Building on top of that work we can get rid of
ImmediateInterruptOK during authentication, by immediately treating
timeouts during authentication as a reason to die. As die interrupts
are handled immediately during client communication that provides a
sensibly quick reaction time to authentication timeout.
Additionally add a few CHECK_FOR_INTERRUPTS() to some more complex
authentication methods. More could be added, but this already should
provides a reasonable coverage.
While it this overall increases the maximum time till a timeout is
reacted to, it greatly reduces complexity and increases
reliability. That seems like a overall win. If the increase proves to
be noticeable we can deal with those cases by moving to nonblocking
network code and add interrupt checking there.
Reviewed-By: Heikki Linnakangas
Sometimes it's useful for a background worker to be able to initialize
its database connection by OID rather than by name, so provide a way
to do that.
This reverts commit 1826987a46d079458007b7b6bbcbbd852353adbb.
The overall design was deemed unacceptable, in discussion following the
previous commit message; we might find some parts of it still
salvageable, but I don't want to be on the hook for fixing it, so let's
wait until we have a new patch.
The previous representation using a boolean column for each attribute
would not scale as well as we want to add further attributes.
Extra auxilliary functions are added to go along with this change, to
make up for the lost convenience of access of the old representation.
Catalog version bumped due to change in catalogs and the new functions.
Author: Adam Brightwell, minor tweaks by Álvaro
Reviewed by: Stephen Frost, Andres Freund, Álvaro Herrera
xlog.c is huge, this makes it a little bit smaller, which is nice. Functions
related to putting together the WAL record are in xloginsert.c, and the
lower level stuff for managing WAL buffers and such are in xlog.c.
Also move the definition of XLogRecord to a separate header file. This
causes churn in the #includes of all the files that write WAL records, and
redo routines, but it avoids pulling in xlog.h into most places.
Reviewed by Michael Paquier, Alvaro Herrera, Andres Freund and Amit Kapila.
This new GUC context option allows GUC parameters to have the combined
properties of PGC_BACKEND and PGC_SUSET, ie, they don't change after
session start and non-superusers can't change them. This is a more
appropriate choice for log_connections and log_disconnections than their
previous context of PGC_BACKEND, because we don't want non-superusers
to be able to affect whether their sessions get logged.
Note: the behavior for log_connections is still a bit odd, in that when
a superuser attempts to set it from PGOPTIONS, the setting takes effect
but it's too late to enable or suppress connection startup logging.
It's debatable whether that's worth fixing, and in any case there is
a reasonable argument for PGC_SU_BACKEND to exist.
In passing, re-pgindent the files touched by this commit.
Fujii Masao, reviewed by Joe Conway and Amit Kapila
This is useful to allow to set GUCs to values that include spaces;
something that wasn't previously possible. The primary case motivating
this is the desire to set default_transaction_isolation to 'repeatable
read' on a per connection basis, but other usecases like seach_path do
also exist.
This introduces a slight backward incompatibility: Previously a \ in
an option value would have been passed on literally, now it'll be
taken as an escape.
The relevant mailing list discussion starts with
20140204125823.GJ12016@awork2.anarazel.de.
This refactoring is in preparation for adding support for other SSL
implementations, with no user-visible effects. There are now two #defines,
USE_OPENSSL which is defined when building with OpenSSL, and USE_SSL which
is defined when building with any SSL implementation. Currently, OpenSSL is
the only implementation so the two #defines go together, but USE_SSL is
supposed to be used for implementation-independent code.
The libpq SSL code is changed to use a custom BIO, which does all the raw
I/O, like we've been doing in the backend for a long time. That makes it
possible to use MSG_NOSIGNAL to block SIGPIPE when using SSL, which avoids
a couple of syscall for each send(). Probably doesn't make much performance
difference in practice - the SSL encryption is expensive enough to mask the
effect - but it was a natural result of this refactoring.
Based on a patch by Martijn van Oosterhout from 2006. Briefly reviewed by
Alvaro Herrera, Andreas Karlsson, Jeff Janes.
Both the psql banner and the connection logging already included
SSL status, cipher and bitlength, this adds the information about
compression being on or off.
In order for this to work, walsenders need the optional ability to
connect to a database, so the "replication" keyword now allows true
or false, for backward-compatibility, and the new value "database"
(which causes the "dbname" parameter to be respected).
walsender needs to loop not only when idle but also when sending
decoded data to the user and when waiting for more xlog data to decode.
This means that there are now three separate loops inside walsender.c;
although some refactoring has been done here, this is still a bit ugly.
Andres Freund, with contributions from Álvaro Herrera, and further
review by me.
Expand the messages when log_connections is enabled to include the
fact that SSL is used and the SSL cipher information.
Dr. Andreas Kunert, review by Marko Kreen
Just as backends must clean up their shared memory state (releasing
lwlocks, buffer pins, etc.) before exiting, they must also perform
any similar cleanups related to dynamic shared memory segments they
have mapped before unmapping those segments. So add a mechanism to
ensure that.
Existing on_shmem_exit hooks include both "user level" cleanup such
as transaction abort and removal of leftover temporary relations and
also "low level" cleanup that forcibly released leftover shared
memory resources. On-detach callbacks should run after the first
group but before the second group, so create a new before_shmem_exit
function for registering the early callbacks and keep on_shmem_exit
for the regular callbacks. (An earlier draft of this patch added an
additional argument to on_shmem_exit, but that had a much larger
footprint and probably a substantially higher risk of breaking third
party code for no real gain.)
Patch by me, reviewed by KaiGai Kohei and Andres Freund.
In 9.3, there's no particular limit on the number of bgworkers;
instead, we just count up the number that are actually registered,
and use that to set MaxBackends. However, that approach causes
problems for Hot Standby, which needs both MaxBackends and the
size of the lock table to be the same on the standby as on the
master, yet it may not be desirable to run the same bgworkers in
both places. 9.3 handles that by failing to notice the problem,
which will probably work fine in nearly all cases anyway, but is
not theoretically sound.
A further problem with simply counting the number of registered
workers is that new workers can't be registered without a
postmaster restart. This is inconvenient for administrators,
since bouncing the postmaster causes an interruption of service.
Moreover, there are a number of applications for background
processes where, by necessity, the background process must be
started on the fly (e.g. parallel query). While this patch
doesn't actually make it possible to register new background
workers after startup time, it's a necessary prerequisite.
Patch by me. Review by Michael Paquier.
SnapshotNow scans have the undesirable property that, in the face of
concurrent updates, the scan can fail to see either the old or the new
versions of the row. In many cases, we work around this by requiring
DDL operations to hold AccessExclusiveLock on the object being
modified; in some cases, the existing locking is inadequate and random
failures occur as a result. This commit doesn't change anything
related to locking, but will hopefully pave the way to allowing lock
strength reductions in the future.
The major issue has held us back from making this change in the past
is that taking an MVCC snapshot is significantly more expensive than
using a static special snapshot such as SnapshotNow. However, testing
of various worst-case scenarios reveals that this problem is not
severe except under fairly extreme workloads. To mitigate those
problems, we avoid retaking the MVCC snapshot for each new scan;
instead, we take a new snapshot only when invalidation messages have
been processed. The catcache machinery already requires that
invalidation messages be sent before releasing the related heavyweight
lock; else other backends might rely on locally-cached data rather
than scanning the catalog at all. Thus, making snapshot reuse
dependent on the same guarantees shouldn't break anything that wasn't
already subtly broken.
Patch by me. Review by Michael Paquier and Andres Freund.
GNU gettext selects a default encoding for the messages it emits in a
platform-specific manner; it uses the Windows ANSI code page on Windows
and follows LC_CTYPE on other platforms. This is inconvenient for
PostgreSQL server processes, so realize consistent cross-platform
behavior by calling bind_textdomain_codeset() on Windows each time we
permanently change LC_CTYPE. This primarily affects SQL_ASCII databases
and processes like the postmaster that do not attach to a database,
making their behavior consistent with PostgreSQL on non-Windows
platforms. Messages from SQL_ASCII databases use the encoding implied
by the database LC_CTYPE, and messages from non-database processes use
LC_CTYPE from the postmaster system environment. PlatformEncoding
becomes unused, so remove it.
Make write_console() prefer WriteConsoleW() to write() regardless of the
encodings in use. In this situation, write() will invariably mishandle
non-ASCII characters.
elog.c has assumed that messages conform to the database encoding.
While usually true, this does not hold for SQL_ASCII and MULE_INTERNAL.
Introduce MessageEncoding to track the actual encoding of message text.
The present consumers are Windows-specific code for converting messages
to UTF16 for use in system interfaces. This fixes the appearance in
Windows event logs and consoles of translated messages from SQL_ASCII
processes like the postmaster. Note that SQL_ASCII inherently disclaims
a strong notion of encoding, so non-ASCII byte sequences interpolated
into messages by %s may yet yield a nonsensical message. MULE_INTERNAL
has similar problems at present, albeit for a different reason: its lack
of libiconv support or a conversion to UTF8.
Consequently, one need no longer restart Windows with a different
Windows ANSI code page to broadly test backend logging under a given
language. Changing the user's locale ("Format") is enough. Several
accounts can simultaneously run postmasters under different locales, all
correctly logging localized messages to Windows event logs and consoles.
Alexander Law and Noah Misch
An oversight in commit e710b65c1c56ca7b91f662c63d37ff2e72862a94 allowed
database names beginning with "-" to be treated as though they were secure
command-line switches; and this switch processing occurs before client
authentication, so that even an unprivileged remote attacker could exploit
the bug, needing only connectivity to the postmaster's port. Assorted
exploits for this are possible, some requiring a valid database login,
some not. The worst known problem is that the "-r" switch can be invoked
to redirect the process's stderr output, so that subsequent error messages
will be appended to any file the server can write. This can for example be
used to corrupt the server's configuration files, so that it will fail when
next restarted. Complete destruction of database tables is also possible.
Fix by keeping the database name extracted from a startup packet fully
separate from command-line switches, as had already been done with the
user name field.
The Postgres project thanks Mitsumasa Kondo for discovering this bug,
Kyotaro Horiguchi for drafting the fix, and Noah Misch for recognizing
the full extent of the danger.
Security: CVE-2013-1899
The pg_start_backup() and pg_stop_backup() functions checked the privileges
of the initially-authenticated user rather than the current user, which is
wrong. For example, a user-defined index function could successfully call
these functions when executed by ANALYZE within autovacuum. This could
allow an attacker with valid but low-privilege database access to interfere
with creation of routine backups. Reported and fixed by Noah Misch.
Security: CVE-2013-1901
This GUC allows limiting the time spent waiting to acquire any one
heavyweight lock.
In support of this, improve the recently-added timeout infrastructure
to permit efficiently enabling or disabling multiple timeouts at once.
That reduces the performance hit from turning on lock_timeout, though
it's still not zero.
Zoltán Böszörményi, reviewed by Tom Lane,
Stephen Frost, and Hari Babu
This generalizes the existing ALTER ROLE ... SET and ALTER DATABASE
... SET functionality to allow creating settings that apply to all users
in all databases.
reviewed by Pavel Stehule
... not on auxiliary processes. I managed to overlook the fact that I
had disabled assertions on my HEAD checkout long ago.
Hopefully this will turn the buildfarm green again, and put an end to
today's silliness.
Background workers are postmaster subprocesses that run arbitrary
user-specified code. They can request shared memory access as well as
backend database connections; or they can just use plain libpq frontend
database connections.
Modules listed in shared_preload_libraries can register background
workers in their _PG_init() function; this is early enough that it's not
necessary to provide an extra GUC option, because the necessary extra
resources can be allocated early on. Modules can install more than one
bgworker, if necessary.
Care is taken that these extra processes do not interfere with other
postmaster tasks: only one such process is started on each ServerLoop
iteration. This means a large number of them could be waiting to be
started up and postmaster is still able to quickly service external
connection requests. Also, shutdown sequence should not be impacted by
a worker process that's reasonably well behaved (i.e. promptly responds
to termination signals.)
The current implementation lets worker processes specify their start
time, i.e. at what point in the server startup process they are to be
started: right after postmaster start (in which case they mustn't ask
for shared memory access), when consistent state has been reached
(useful during recovery in a HOT standby server), or when recovery has
terminated (i.e. when normal backends are allowed).
In case of a bgworker crash, actions to take depend on registration
data: if shared memory was requested, then all other connections are
taken down (as well as other bgworkers), just like it were a regular
backend crashing. The bgworker itself is restarted, too, within a
configurable timeframe (which can be configured to be never).
More features to add to this framework can be imagined without much
effort, and have been discussed, but this seems good enough as a useful
unit already.
An elementary sample module is supplied.
Author: Álvaro Herrera
This patch is loosely based on prior patches submitted by KaiGai Kohei,
and unsubmitted code by Simon Riggs.
Reviewed by: KaiGai Kohei, Markus Wanner, Andres Freund,
Heikki Linnakangas, Simon Riggs, Amit Kapila
Similar changes were done to pg_hba.conf earlier already, this commit makes
pg_ident.conf to behave the same as pg_hba.conf.
This has two user-visible effects. First, if pg_ident.conf contains multiple
errors, the whole file is parsed at postmaster startup time and all the
errors are immediately reported. Before this patch, the file was parsed and
the errors were reported only when someone tries to connect using an
authentication method that uses the file, and the parsing stopped on first
error. Second, if you SIGHUP to reload the config files, and the new
pg_ident.conf file contains an error, the error is logged but the old file
stays in effect.
Also, regular expressions in pg_ident.conf are now compiled only once when
the file is loaded, rather than every time the a user is authenticated. That
should speed up authentication if you have a lot of regexps in the file.
Amit Kapila
