The case of "node == parent" might seem impossible, since we just
allocated the new node. But it's possible if parent is a dangling
reference to a recently-deleted context. In fact, given aset.c's
habit of recycling contexts, it's actually rather likely if that's so.
If we'd had this assertion before, it would have simplified debugging
a recently-identified walsender issue.
Reported-by: Anthonin Bonnefoy <anthonin.bonnefoy@datadoghq.com>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CAO6_XqoJA7-_G6t7Uqe5nWF3nj+QBGn4F6Ptp=rUGDr0zo+KvA@mail.gmail.com
Commit 0bada39c83 fixed a bug of this kind,
which existed in all branches for six days before detection. While the
probability of reaching the trouble was low, the disruption was extreme. No
new backends could start, and service restoration needed an immediate
shutdown. Hence, add this to catch the next bug like it.
The new check in RelationIdGetRelation() suffices to make autovacuum detect
the bug in commit 243e9b40f1 that led to commit
0bada39. This also checks in a number of similar places. It replaces each
Assert(IsTransactionState()) that pertained to a conditional catalog read.
No back-patch for now, but a back-patch of commit 243e9b4 should back-patch
this, too. A back-patch could omit the src/test/regress changes, since back
branches won't gain new index columns.
Reported-by: Alexander Lakhin <exclusion@gmail.com>
Discussion: https://postgr.es/m/20250410191830.0e.nmisch@google.com
Discussion: https://postgr.es/m/10ec0bc3-5933-1189-6bb8-5dec4114558e@gmail.com
estimate_multivariate_ndistinct() is coded to assume the caller handles
passing it a list of GroupVarInfos with unique 'var' fields over the
entire list. 6bb6a62f3 added code which didn't ensure this and that
could result in estimate_multivariate_ndistinct() erroring out with:
ERROR: corrupt MVNDistinct entry
This occurred because estimate_multivariate_ndistinct() first searches
for a set of stats that match to at least two of the given GroupVarInfos
and then later assumes that the MVNDistinctItem.items array of the
best matching stats will have an entry for those two columns. If the
GroupVarInfos List contained a duplicate entry then the same column could
be matched to twice and that could trick the code into thinking we have
>= 2 columns matched in cases where only a single distinct column has been
matched. This could result in a failure to find the correct
MVNDistinctItem in the stats as the array containing those never
contains an item for single columns.
Here we make it more clear that the function needs a distinct set of
GroupVarInfos and also tidy up a few other comments to make things a bit
easier to follow.
Author: David Rowley <drowleyml@gmail.com>
Discussion: https://postgr.es/m/CAApHDvocZCUhM9W9mJ39d6oQz7ePKoqFnao_347mvC-A7QatcQ@mail.gmail.com
Make sure that function declarations use names that exactly match the
corresponding names from function definitions in a few places. These
inconsistencies were all introduced during Postgres 18 development.
This commit was written with help from clang-tidy, by mechanically
applying the same rules as similar clean-up commits (the earliest such
commit was commit 035ce1fe).
Sami complained that there's a discrepancy between n_mod_since_analyze
and n_ins_since_vacuum, as the former only accounts for committed changes
and the latter tracks committed and aborted inserts. Nobody seemed
overly concerned that this would cause any concerning issues. The
repercussions, from what I can tell, are limited to causing an
autovacuum to trigger for inserts sooner than it otherwise might. For
typical ratios of commits to aborts, it's unlikely to ever be noticed.
Fixing things to make it so n_ins_since_vacuum only displays committed
inserts would require an additional field in PgStat_TableCounts, which
does not quite seem worthwhile at this stage. This commit just adds a
comment with some details to mention that we know about it, which will
hopefully prevent repeat discussions.
Reported-by: Sami Imseih <samimseih@gmail.com>
Author: David Rowley <drowleyml@gmail.com>
Reviewed-by: Sami Imseih <samimseih@gmail.com>
Discussion: https://postgr.es/m/CAApHDvpgV3a-R2EGmPOh0L-x3pHbZpM3y4dySWfy+UqUazwDQA@mail.gmail.com
By inspection, ip_addrsize() can't return a negative result.
(If it could, we'd have way bigger problems elsewhere.)
So delete useless check in network_send(). Most C compilers
are probably perfectly capable of removing this code by
themselves, but it's confusing/misleading.
Bug: #18889
Reported-by: Daniel Elishakov <dan-eli@mail.ru>
Discussion: https://postgr.es/m/18889-73d4f19e953a629e@postgresql.org
It can be set to either COPY (the default) or CLONE if the system
supports it. CLONE causes callers of copydir(), currently CREATE
DATABASE ... STRATEGY=FILE_COPY and ALTER DATABASE ... SET TABLESPACE =
..., to use copy_file_range (Linux, FreeBSD) or copyfile (macOS) to copy
files instead of a read-write loop over the contents.
CLONE gives the kernel the opportunity to share block ranges on
copy-on-write file systems and push copying down to storage on others,
depending on configuration. On some systems CLONE can be used to clone
large databases quickly with CREATE DATABASE ... TEMPLATE=source
STRATEGY=FILE_COPY.
Other operating systems could be supported; patches welcome.
Co-authored-by: Nazir Bilal Yavuz <byavuz81@gmail.com>
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Reviewed-by: Ranier Vilela <ranier.vf@gmail.com>
Discussion: https://postgr.es/m/CA%2BhUKGLM%2Bt%2BSwBU-cHeMUXJCOgBxSHLGZutV5zCwY4qrCcE02w%40mail.gmail.com
This adds a function for retrieving memory context statistics
and information from backends as well as auxiliary processes.
The intended usecase is cluster debugging when under memory
pressure or unanticipated memory usage characteristics.
When calling the function it sends a signal to the specified
process to submit statistics regarding its memory contexts
into dynamic shared memory. Each memory context is returned
in detail, followed by a cumulative total in case the number
of contexts exceed the max allocated amount of shared memory.
Each process is limited to use at most 1Mb memory for this.
A summary can also be explicitly requested by the user, this
will return the TopMemoryContext and a cumulative total of
all lower contexts.
In order to not block on busy processes the caller specifies
the number of seconds during which to retry before timing out.
In the case where no statistics are published within the set
timeout, the last known statistics are returned, or NULL if
no previously published statistics exist. This allows dash-
board type queries to continually publish even if the target
process is temporarily congested. Context records contain a
timestamp to indicate when they were submitted.
Author: Rahila Syed <rahilasyed90@gmail.com>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Tomas Vondra <tomas@vondra.me>
Reviewed-by: Atsushi Torikoshi <torikoshia@oss.nttdata.com>
Reviewed-by: Fujii Masao <masao.fujii@oss.nttdata.com>
Reviewed-by: Alexander Korotkov <aekorotkov@gmail.com>
Discussion: https://postgr.es/m/CAH2L28v8mc9HDt8QoSJ8TRmKau_8FM_HKS41NeO9-6ZAkuZKXw@mail.gmail.com
Add basic NUMA awareness routines, using a minimal src/port/pg_numa.c
portability wrapper and an optional build dependency, enabled by
--with-libnuma configure option. For now this is Linux-only, other
platforms may be supported later.
A built-in SQL function pg_numa_available() allows checking NUMA
support, i.e. that the server was built/linked with the NUMA library.
The main function introduced is pg_numa_query_pages(), which allows
determining the NUMA node for individual memory pages. Internally the
function uses move_pages(2) syscall, as it allows batching, and is more
efficient than get_mempolicy(2).
Author: Jakub Wartak <jakub.wartak@enterprisedb.com>
Co-authored-by: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Tomas Vondra <tomas@vondra.me>
Discussion: https://postgr.es/m/CAKZiRmxh6KWo0aqRqvmcoaX2jUxZYb4kGp3N%3Dq1w%2BDiH-696Xw%40mail.gmail.com
This allows them to be added without scanning the table, and validating
them afterwards without holding access exclusive lock on the table after
any violating rows have been deleted or fixed.
Doing ALTER TABLE ... SET NOT NULL for a column that has an invalid
not-null constraint validates that constraint. ALTER TABLE .. VALIDATE
CONSTRAINT is also supported. There are various checks on whether an
invalid constraint is allowed in a child table when the parent table has
a valid constraint; this should match what we do for enforced/not
enforced constraints.
pg_attribute.attnotnull is now only an indicator for whether a not-null
constraint exists for the column; whether it's valid or invalid must be
queried in pg_constraint. Applications can continue to query
pg_attribute.attnotnull as before, but now it's possible that NULL rows
are present in the column even when that's set to true.
For backend internal purposes, we cache the nullability status in
CompactAttribute->attnullability that each tuple descriptor carries
(replacing CompactAttribute.attnotnull, which was a mirror of
Form_pg_attribute.attnotnull). During the initial tuple descriptor
creation, based on the pg_attribute scan, we set this to UNRESTRICTED if
pg_attribute.attnotnull is false, or to UNKNOWN if it's true; then we
update the latter to VALID or INVALID depending on the pg_constraint
scan. This flag is also copied when tupledescs are copied.
Comparing tuple descs for equality must also compare the
CompactAttribute.attnullability flag and return false in case of a
mismatch.
pg_dump deals with these constraints by storing the OIDs of invalid
not-null constraints in a separate array, and running a query to obtain
their properties. The regular table creation SQL omits them entirely.
They are then dealt with in the same way as "separate" CHECK
constraints, and dumped after the data has been loaded. Because no
additional pg_dump infrastructure was required, we don't bump its
version number.
I decided not to bump catversion either, because the old catalog state
works perfectly in the new world. (Trying to run with new catalog state
and the old server version would likely run into issues, however.)
System catalogs do not support invalid not-null constraints (because
commit 14e87ffa5c didn't allow them to have pg_constraint rows
anyway.)
Author: Rushabh Lathia <rushabh.lathia@gmail.com>
Author: Jian He <jian.universality@gmail.com>
Reviewed-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Tested-by: Ashutosh Bapat <ashutosh.bapat.oss@gmail.com>
Discussion: https://postgr.es/m/CAGPqQf0KitkNack4F5CFkFi-9Dqvp29Ro=EpcWt=4_hs-Rt+bQ@mail.gmail.com
This escape shows the numeric server IP address that the client
has connected to. Unix-socket connections will show "[local]".
Non-client processes (e.g. background processes) will show "[none]".
We expect that this option will be of interest to only a fairly
small number of users. Therefore the implementation is optimized
for the case where it's not used (that is, we don't do the string
conversion until we have to), and we've not added the field to
csvlog or jsonlog formats.
Author: Greg Sabino Mullane <htamfids@gmail.com>
Reviewed-by: Cary Huang <cary.huang@highgo.ca>
Reviewed-by: David Steele <david@pgmasters.net>
Reviewed-by: Jim Jones <jim.jones@uni-muenster.de>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CAKAnmmK-U+UicE-qbNU23K--Q5XTLdM6bj+gbkZBZkjyjrd3Ow@mail.gmail.com
palloc() is invoked with a specific formula for its allocation size in
quote_literal_cstr(). This wastes some memory, but the size is large
enough to cover even the worst-case scenarios.
No explanations were given about the reasons behind these numbers. This
commit adds more documentation about all that.
Author: Steve Chavez <steve@supabase.io>
Discussion: https://postgr.es/m/CAGRrpzZ9bToRWS+fAnjxDJrxwZN1QcJ-y1Pn2yg=Hst6rydLtw@mail.gmail.com
stats_fetch_consistency set to "snapshot" causes the backend entry
"beentry" retrieved by pgstat_get_beentry_by_proc_number() to be reset
at the beginning of pgstat_fetch_stat_backend() when fetching the
backend pgstats entry. As coded, "beentry" was being accessed after
being freed. This commit moves all the accesses to "beentry" to happen
before calling pgstat_fetch_stat_backend(), fixing the problem.
This problem could be reached by calling the SQL functions
pg_stat_get_backend_io() or pg_stat_get_backend_wal().
Issue caught by valgrind.
Reported-by: Alexander Lakhin <exclusion@gmail.com>
Author: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Discussion: https://postgr.es/m/f1788cc0-253a-4a3a-aee0-1b8ab9538736@gmail.com
This should silence Coverity's complaints about the result being
sometimes ignored.
I'm inclined to think that these routines are simply misdesigned,
because sometimes it's okay to ignore the result and sometimes it
isn't, and we have no way to enforce the latter. But for now
I just added a comment.
There were several places in ordering-related planning where a
requirement for btree was hardcoded but an amcanorder index could
suffice. This fixes that. We just need to do the necessary mapping
between strategy numbers and compare types and adjust some related
APIs so that this works independent of btree strategy numbers. For
instance, non-btree amcanorder indexes can now be used to support
sorting and merge joins. Also, predtest.c works independent of btree
strategy numbers now.
To avoid performance regressions, some details on btree and other
built-in index types are still hardcoded as shortcuts, but other index
types now have access to the same features by providing the required
flags and callbacks.
Author: Mark Dilger <mark.dilger@enterprisedb.com>
Co-authored-by: Peter Eisentraut <peter@eisentraut.org>
Discussion: https://www.postgresql.org/message-id/flat/E72EAA49-354D-4C2E-8EB9-255197F55330@enterprisedb.com
Teach nbtree multi-column index scans to opportunistically skip over
irrelevant sections of the index given a query with no "=" conditions on
one or more prefix index columns. When nbtree is passed input scan keys
derived from a predicate "WHERE b = 5", new nbtree preprocessing steps
output "WHERE a = ANY(<every possible 'a' value>) AND b = 5" scan keys.
That is, preprocessing generates a "skip array" (and an output scan key)
for the omitted prefix column "a", which makes it safe to mark the scan
key on "b" as required to continue the scan. The scan is therefore able
to repeatedly reposition itself by applying both the "a" and "b" keys.
A skip array has "elements" that are generated procedurally and on
demand, but otherwise works just like a regular ScalarArrayOp array.
Preprocessing can freely add a skip array before or after any input
ScalarArrayOp arrays. Index scans with a skip array decide when and
where to reposition the scan using the same approach as any other scan
with array keys. This design builds on the design for array advancement
and primitive scan scheduling added to Postgres 17 by commit 5bf748b8.
Testing has shown that skip scans of an index with a low cardinality
skipped prefix column can be multiple orders of magnitude faster than an
equivalent full index scan (or sequential scan). In general, the
cardinality of the scan's skipped column(s) limits the number of leaf
pages that can be skipped over.
The core B-Tree operator classes on most discrete types generate their
array elements with the help of their own custom skip support routine.
This infrastructure gives nbtree a way to generate the next required
array element by incrementing (or decrementing) the current array value.
It can reduce the number of index descents in cases where the next
possible indexable value frequently turns out to be the next value
stored in the index. Opclasses that lack a skip support routine fall
back on having nbtree "increment" (or "decrement") a skip array's
current element by setting the NEXT (or PRIOR) scan key flag, without
directly changing the scan key's sk_argument. These sentinel values
behave just like any other value from an array -- though they can never
locate equal index tuples (they can only locate the next group of index
tuples containing the next set of non-sentinel values that the scan's
arrays need to advance to).
A skip array's range is constrained by "contradictory" inequality keys.
For example, a skip array on "x" will only generate the values 1 and 2
given a qual such as "WHERE x BETWEEN 1 AND 2 AND y = 66". Such a skip
array qual usually has near-identical performance characteristics to a
comparable SAOP qual "WHERE x = ANY('{1, 2}') AND y = 66". However,
improved performance isn't guaranteed. Much depends on physical index
characteristics.
B-Tree preprocessing is optimistic about skipping working out: it
applies static, generic rules when determining where to generate skip
arrays, which assumes that the runtime overhead of maintaining skip
arrays will pay for itself -- or lead to only a modest performance loss.
As things stand, these assumptions are much too optimistic: skip array
maintenance will lead to unacceptable regressions with unsympathetic
queries (queries whose scan can't skip over many irrelevant leaf pages).
An upcoming commit will address the problems in this area by enhancing
_bt_readpage's approach to saving cycles on scan key evaluation, making
it work in a way that directly considers the needs of = array keys
(particularly = skip array keys).
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Masahiro Ikeda <masahiro.ikeda@nttdata.com>
Reviewed-By: Heikki Linnakangas <heikki.linnakangas@iki.fi>
Reviewed-By: Matthias van de Meent <boekewurm+postgres@gmail.com>
Reviewed-By: Tomas Vondra <tomas@vondra.me>
Reviewed-By: Aleksander Alekseev <aleksander@timescale.com>
Reviewed-By: Alena Rybakina <a.rybakina@postgrespro.ru>
Discussion: https://postgr.es/m/CAH2-Wzmn1YsLzOGgjAQZdn1STSG_y8qP__vggTaPAYXJP+G4bw@mail.gmail.com
Fix for commit 9ef1851685: We have to skip indexes where sortopfamily
is NULL. This takes the place of the previous btree check. Detected
by valgrind on the buildfarm.
This was previously not supported because the btree strategy numbers
were hardcoded. Now we can support this for any index that has the
required strategy mapping support and the required operators.
If an index scan used for get_actual_variable_range() requires
recheck, we now just ignore it instead of erroring out. With btree we
knew this couldn't happen, but now it might.
Author: Mark Dilger <mark.dilger@enterprisedb.com>
Co-authored-by: Peter Eisentraut <peter@eisentraut.org>
Discussion: https://www.postgresql.org/message-id/flat/E72EAA49-354D-4C2E-8EB9-255197F55330@enterprisedb.com
compareentry() is declared to work on WordEntryIN structs, but
tsvectorrecv() is using it in two places to work on WordEntry
structs. This is almost okay, since WordEntry is the first
field of WordEntryIN. But on machines with 8-byte pointers,
WordEntryIN will have a larger alignment spec than WordEntry,
and it's at least theoretically possible that the compiler
could generate code that depends on the larger alignment.
Given the lack of field reports, this may be just a hypothetical bug
that upsets nothing except sanitizer tools. Or it may be real on
certain hardware but nobody's tried to use tsvectorrecv() on such
hardware. In any case we should fix it, and the fix is trivial:
just change compareentry() so that it works on WordEntry without any
mention of WordEntryIN. We can also get rid of the quite-useless
intermediate function WordEntryCMP.
Bug: #18875
Reported-by: Alexander Lakhin <exclusion@gmail.com>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/18875-07a29c49c825a608@postgresql.org
Backpatch-through: 13
In the historical implementation of SQL functions (if they don't get
inlined), we built plans for all the contained queries at first call
within an outer query, and then re-used those plans for the duration
of the outer query, and then forgot everything. This was not ideal,
not least because the plans could not be customized to specific values
of the function's parameters. Our plancache infrastructure seems
mature enough to be used here. That will solve both the problem with
not being able to build custom plans and the problem with not being
able to share work across successive outer queries.
Aside from those performance concerns, this change fixes a
longstanding bugaboo with SQL functions: you could not write DDL that
would affect later statements in the same function. That's mostly
still true with new-style SQL functions, since the results of parse
analysis are baked into the stored query trees (and protected by
dependency records). But for old-style SQL functions, it will now
work much as it does with PL/pgSQL functions, because we delay parse
analysis and planning of each query until we're ready to run it.
Some edge cases that require replanning are now handled better too;
see for example the new rowsecurity test, where we now detect an RLS
context change that was previously missed.
One other edge-case change that might be worthy of a release note
is that we now insist that a SQL function's result be generated
by the physically-last query within it. Previously, if the last
original query was deleted by a DO INSTEAD NOTHING rule, we'd be
willing to take the result from the preceding query instead.
This behavior was undocumented except in source-code comments,
and it seems hard to believe that anyone's relying on it.
Along the way to this feature, we needed a few infrastructure changes:
* The plancache can now take either a raw parse tree or an
analyzed-but-not-rewritten Query as the starting point for a
CachedPlanSource. If given a Query, it is caller's responsibility
that nothing will happen to invalidate that form of the query.
We use this for new-style SQL functions, where what's in pg_proc is
serialized Query(s) and we trust the dependency mechanism to disallow
DDL that would break those.
* The plancache now offers a way to invoke a post-rewrite callback
to examine/modify the rewritten parse tree when it is rebuilding
the parse trees after a cache invalidation. We need this because
SQL functions sometimes adjust the parse tree to make its output
exactly match the declared result type; if the plan gets rebuilt,
that has to be re-done.
* There is a new backend module utils/cache/funccache.c that
abstracts the idea of caching data about a specific function
usage (a particular function and set of input data types).
The code in it is moved almost verbatim from PL/pgSQL, which
has done that for a long time. We use that logic now for
SQL-language functions too, and maybe other PLs will have use
for it in the future.
Author: Alexander Pyhalov <a.pyhalov@postgrespro.ru>
Co-authored-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Pavel Stehule <pavel.stehule@gmail.com>
Discussion: https://postgr.es/m/8216639.NyiUUSuA9g@aivenlaptop
For GiST, having a sortsupport function allows building the index
using the "sorted build" method, which is much faster.
For b-tree, the sortsupport routine doesn't give any new
functionality, but speeds up sorting a tiny bit. The difference is not
very significant, about 2% in cursory testing on my laptop, because
the range type comparison function has quite a lot of overhead from
detoasting. In any case, since we have the function for GiST anyway,
we might as well register it for the btree opfamily too.
Author: Bernd Helmle <mailings@oopsware.de>
Discussion: https://www.postgresql.org/message-id/64d324ce2a6d535d3f0f3baeeea7b25beff82ce4.camel@oopsware.de
pg_shmem_allocations tracks the memory allocated by ShmemInitStruct(),
but for shared hash tables that covered only the header and hash
directory. The remaining parts (segments and buckets) were allocated
later using ShmemAlloc(), which does not update the shmem accounting.
Thus, these allocations were not shown in pg_shmem_allocations.
This commit improves the situation by allocating all the hash table
parts at once, using a single ShmemInitStruct() call. This way the
ShmemIndex entries (and thus pg_shmem_allocations) better reflect the
proper size of the hash table.
This affects allocations for private (non-shared) hash tables too, as
the hash_create() code is shared. For non-shared tables this however
makes no practical difference.
This changes the alignment a bit. ShmemAlloc() aligns the chunks using
CACHELINEALIGN(), which means some parts (header, directory, segments)
were aligned this way. Allocating all parts as a single chunk removes
this (implicit) alignment. We've considered adding explicit alignment,
but we've decided not to - it seems to be merely a coincidence due to
using the ShmemAlloc() API, not due to necessity.
Author: Rahila Syed <rahilasyed90@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Nazir Bilal Yavuz <byavuz81@gmail.com>
Reviewed-by: Tomas Vondra <tomas@vondra.me>
Discussion: https://postgr.es/m/CAH2L28vHzRankszhqz7deXURxKncxfirnuW68zD7+hVAqaS5GQ@mail.gmail.com
Currently, the cancel request key is a 32-bit token, which isn't very
much entropy. If you want to cancel another session's query, you can
brute-force it. In most environments, an unauthorized cancellation of
a query isn't very serious, but it nevertheless would be nice to have
more protection from it. Hence make the key longer, to make it harder
to guess.
The longer cancellation keys are generated when using the new protocol
version 3.2. For connections using version 3.0, short 4-bytes keys are
still used.
The new longer key length is not hardcoded in the protocol anymore,
the client is expected to deal with variable length keys, up to 256
bytes. This flexibility allows e.g. a connection pooler to add more
information to the cancel key, which might be useful for finding the
connection.
Reviewed-by: Jelte Fennema-Nio <postgres@jeltef.nl>
Reviewed-by: Robert Haas <robertmhaas@gmail.com> (earlier versions)
Discussion: https://www.postgresql.org/message-id/508d0505-8b7a-4864-a681-e7e5edfe32aa@iki.fi
This expands the NOT ENFORCED constraint flag, previously only
supported for CHECK constraints (commit ca87c415e2), to foreign key
constraints.
Normally, when a foreign key constraint is created on a table, action
and check triggers are added to maintain data integrity. With this
patch, if a constraint is marked as NOT ENFORCED, integrity checks are
no longer required, making these triggers unnecessary. Consequently,
when creating a NOT ENFORCED foreign key constraint, triggers will not
be created, and the constraint will be marked as NOT VALID.
Similarly, if an existing foreign key constraint is changed to NOT
ENFORCED, the associated triggers will be dropped, and the constraint
will also be marked as NOT VALID. Conversely, if a NOT ENFORCED
foreign key constraint is changed to ENFORCED, the necessary triggers
will be created, and the will be changed to VALID by performing
necessary validation.
Since not-enforced foreign key constraints have no triggers, the
shortcut used for example in psql and pg_dump to skip looking for
foreign keys if the relation is known not to have triggers no longer
applies. (It already didn't work for partitioned tables.)
Author: Amul Sul <sulamul@gmail.com>
Reviewed-by: Joel Jacobson <joel@compiler.org>
Reviewed-by: Andrew Dunstan <andrew@dunslane.net>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Reviewed-by: jian he <jian.universality@gmail.com>
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Ashutosh Bapat <ashutosh.bapat.oss@gmail.com>
Reviewed-by: Isaac Morland <isaac.morland@gmail.com>
Reviewed-by: Alexandra Wang <alexandra.wang.oss@gmail.com>
Tested-by: Triveni N <triveni.n@enterprisedb.com>
Discussion: https://www.postgresql.org/message-id/flat/CAAJ_b962c5AcYW9KUt_R_ER5qs3fUGbe4az-SP-vuwPS-w-AGA@mail.gmail.com
Allow multiple backends to initialize WAL buffers concurrently. This way
`MemSet((char *) NewPage, 0, XLOG_BLCKSZ);` can run in parallel without
taking a single LWLock in exclusive mode.
The new algorithm works as follows:
* reserve a page for initialization using XLogCtl->InitializeReserved,
* ensure the page is written out,
* once the page is initialized, try to advance XLogCtl->InitializedUpTo and
signal to waiters using XLogCtl->InitializedUpToCondVar condition
variable,
* repeat previous steps until we reserve initialization up to the target
WAL position,
* wait until concurrent initialization finishes using a
XLogCtl->InitializedUpToCondVar.
Now, multiple backends can, in parallel, concurrently reserve pages,
initialize them, and advance XLogCtl->InitializedUpTo to point to the latest
initialized page.
Author: Yura Sokolov <y.sokolov@postgrespro.ru>
Co-authored-by: Alexander Korotkov <aekorotkov@gmail.com>
Reviewed-by: Pavel Borisov <pashkin.elfe@gmail.com>
Reviewed-by: Tomas Vondra <tomas@vondra.me>
Tested-by: Michael Paquier <michael@paquier.xyz>
Previously effective_io_concurrency and maintenance_io_concurrency could not
be set above 0 on machines without fadvise support. AIO enables IO concurrency
without such support, via io_method=worker.
Currently only subsystems using the read stream API will take advantage of
this. Other users of maintenance_io_concurrency (like recovery prefetching)
which leverage OS advice directly will not benefit from this change. In those
cases, maintenance_io_concurrency will have no effect on I/O behavior.
Author: Melanie Plageman <melanieplageman@gmail.com>
Reviewed-by: Noah Misch <noah@leadboat.com>
Discussion: https://postgr.es/m/CAAKRu_atGgZePo=_g6T3cNtfMf0QxpvoUh5OUqa_cnPdhLd=gw@mail.gmail.com
For AIO we execute completion callbacks in critical sections (to ensure that
AIO can in the future be used for WAL, which in turn requires that we can call
completion callbacks in critical sections, to get the resources for WAL
io). To report checksum errors a backend now has to call
pgstat_prepare_report_checksum_failure(), before entering a critical section,
which guarantees the relevant pgstats entry is in shared memory, the relevant
DSM segment is mapped into the backend's memory and the address is known via a
PgStat_EntryRef.
Reviewed-by: Noah Misch <noah@leadboat.com>
Discussion: https://postgr.es/m/wkjj4p2rmkevutkwc6tewoovdqznj6c6nvjmvii4oo5wmbh5sr@retq7d6uqs4j
We have errmsg_internal(), errdetail_internal(), but not errhint_internal().
Sometimes it is useful to output a hint with already translated format
string (e.g. because there different messages depending on the condition). For
message/detail we do that with the _internal() variants, but we can't do that
with hint today. It's possible to work around that that by using something
like
str = psprintf(translated_format, args);
ereport(...
errhint("%s", str);
but that's not exactly pretty and makes it harder to avoid memory leaks.
Reviewed-by: Noah Misch <noah@leadboat.com>
Discussion: https://postgr.es/m/ym3dqpa4xcvoeknewcw63x77vnqdosbqcetjinb2zfoh65k55m@m4ozmwhr6lk6
Checksum failure stats could be attributed to the wrong database in two cases:
- when a read of a shared relation encountered a checksum error , it would be
attributed to the current database, instead of the "database" representing
shared relations
- when using CREATE DATABASE ... STRATEGY WAL_LOG checksum errors in the
source database would be attributed to the current database
The checksum stats reporting via PageIsVerifiedExtended(PIV_REPORT_STAT) does
not have access to the information about what database a page belongs to.
This fixes the issue by removing PIV_REPORT_STAT and delegating the
responsibility to report stats to the caller, which now can learn about the
number of stats via a new optional argument.
As this changes the signature of PageIsVerifiedExtended() and all callers
should adapt to the new signature, use the occasion to rename the function to
PageIsVerified() and remove the compatibility macro.
We could instead have fixed this by adding information about the database to
the args of PageIsVerified(), but there are soon-to-be-applied patches that
need to separate the stats reporting from the PageIsVerified() call
anyway. Those patches also include testing for the failure paths, something we
inexplicably have not had.
As there is no caller of pgstat_report_checksum_failure() left, remove it.
It'd be possible, but awkward to fix this in the back branches. We considered
doing the work not quite worth it, as mis-attributed stats should still elicit
concern. The emitted error messages do allow to attribute the errors
correctly.
Discussion: https://postgr.es/m/5tyic6epvdlmd6eddgelv47syg2b5cpwffjam54axp25xyq2ga@ptwkinxqo3az
Discussion: https://postgr.es/m/mglpvvbhighzuwudjxzu4br65qqcxsnyvio3nl4fbog3qknwhg@e4gt7npsohuz
The uuidv7_interval() function previously converted a shifted
microsecond-precision timestamp (64-bit integer) to another 64-bit
integer representing a timestamp with nanosecond precision. This
conversion caused overflow for dates beyond the year 2262. The
millisecond and sub-millisecond parts were then extracted from this
nanosecond-precision timestamp and stored in UUIDv7 values.
With this commit, the millisecond and sub-millisecond parts are stored
directly into the UUIDv7 value without being converted back to a
nanosecond precision timestamp. Following RFC 9562, the timestamp is
stored as an unsigned integer, enabling support for dates up to the
year 10889.
Reported and fixed by Andrey Borodin, with cosmetic changes and
regression tests by me.
Reported-by: Andrey Borodin <x4mmm@yandex-team.ru>
Author: Andrey Borodin <x4mmm@yandex-team.ru>
Discussion: https://postgr.es/m/96DEC2D9-659A-40E8-B7BA-AF5D162A9E21@yandex-team.ru
check_createrole_self_grant and check_synchronized_standby_slots
were allocating memory on a LOG elevel without checking if the
allocation succeeded or not, which would have led to a segfault
on allocation failure.
On top of that, a number of callsites were using the ERROR level,
relying on erroring out rather than returning false to allow the
GUC machinery handle it gracefully. Other callsites used WARNING
instead of LOG. While neither being not wrong, this changes all
check_ functions do it consistently with LOG.
init_custom_variable gets a promoted elevel to FATAL to keep
the guc_malloc error handling in line with the rest of the
error handling in that function which already call FATAL. If
we encounter an OOM in this callsite there is no graceful
handling to be had, better to error out hard.
Backpatch the fix to check_createrole_self_grant down to v16
and the fix to check_synchronized_standby_slots down to v17
where they were introduced.
Author: Daniel Gustafsson <daniel@yesql.se>
Reported-by: Nikita <pm91.arapov@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Bug: #18845
Discussion: https://postgr.es/m/18845-582c6e10247377ec@postgresql.org
Backpatch-through: 16
This involves four different implementation strategies:
1. For Windows, we now require _configthreadlocale() to be available
and work (commit f1da075d9a), and the documentation says that the
object returned by localeconv() is in thread-local memory.
2. For glibc, we translate to nl_langinfo_l() calls, because it
offers the same information that way as an extension, and that API is
thread-safe.
3. For macOS/*BSD, use localeconv_l(), which is thread-safe.
4. For everything else, use uselocale() to set the locale for the
thread, and use a big ugly lock to defend against the returned object
being concurrently clobbered. In practice this currently means only
Solaris.
The new call is used in pg_locale.c, replacing calls to setlocale() and
localeconv().
Author: Thomas Munro <thomas.munro@gmail.com>
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Discussion: https://postgr.es/m/CA%2BhUKGJqVe0%2BPv9dvC9dSums_PXxGo9SWcxYAMBguWJUGbWz-A%40mail.gmail.com
