Both views replace the umoptions field with NULL when the user does not
meet qualifications to see it. They used different qualifications, and
pg_user_mappings documented qualifications did not match its implemented
qualifications. Make its documentation and implementation match those
of user_mapping_options. One might argue for stronger qualifications,
but these have long, documented tenure. pg_user_mappings has always
exhibited this problem, so back-patch to 9.2 (all supported versions).
Michael Paquier and Feike Steenbergen. Reviewed by Jeff Janes.
Reported by Andrew Wheelwright.
Security: CVE-2017-7486
Commit 65c3bf19fd3e1f6a591618e92eb4c54d0b217564 moved handling of the,
already then, deprecated requiressl parameter into conninfo_storeval().
The default PGREQUIRESSL environment variable was however lost in the
change resulting in a potentially silent accept of a non-SSL connection
even when set. Its documentation remained. Restore its implementation.
Also amend the documentation to mark PGREQUIRESSL as deprecated for
those not following the link to requiressl. Back-patch to 9.3, where
commit 65c3bf1 first appeared.
Behavior has been more complex when the user provides both deprecated
and non-deprecated settings. Before commit 65c3bf1, libpq operated
according to the first of these found:
requiressl=1
PGREQUIRESSL=1
sslmode=*
PGSSLMODE=*
(Note requiressl=0 didn't override sslmode=*; it would only suppress
PGREQUIRESSL=1 or a previous requiressl=1. PGREQUIRESSL=0 had no effect
whatsoever.) Starting with commit 65c3bf1, libpq ignored PGREQUIRESSL,
and order of precedence changed to this:
last of requiressl=* or sslmode=*
PGSSLMODE=*
Starting now, adopt the following order of precedence:
last of requiressl=* or sslmode=*
PGSSLMODE=*
PGREQUIRESSL=1
This retains the 65c3bf1 behavior for connection strings that contain
both requiressl=* and sslmode=*. It retains the 65c3bf1 change that
either connection string option overrides both environment variables.
For the first time, PGSSLMODE has precedence over PGREQUIRESSL; this
avoids reducing security of "PGREQUIRESSL=1 PGSSLMODE=verify-full"
configurations originating under v9.3 and later.
Daniel Gustafsson
Security: CVE-2017-7485
Some selectivity estimation functions run user-supplied operators over
data obtained from pg_statistic without security checks, which allows
those operators to leak pg_statistic data without having privileges on
the underlying tables. Fix by checking that one of the following is
satisfied: (1) the user has table or column privileges on the table
underlying the pg_statistic data, or (2) the function implementing the
user-supplied operator is leak-proof. If neither is satisfied, planning
will proceed as if there are no statistics available.
At least one of these is satisfied in most cases in practice. The only
situations that are negatively impacted are user-defined or
not-leak-proof operators on a security-barrier view.
Reported-by: Robert Haas <robertmhaas@gmail.com>
Author: Peter Eisentraut <peter_e@gmx.net>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Security: CVE-2017-7484
Storing passwords in plaintext hasn't been a good idea for a very long
time, if ever. Now seems like a good time to finally forbid it, since we're
messing with this in PostgreSQL 10 anyway.
Remove the CREATE/ALTER USER UNENCRYPTED PASSSWORD 'foo' syntax, since
storing passwords unencrypted is no longer supported. ENCRYPTED PASSWORD
'foo' is still accepted, but ENCRYPTED is now just a noise-word, it does
the same as just PASSWORD 'foo'.
Likewise, remove the --unencrypted option from createuser, but accept
--encrypted as a no-op for backward compatibility. AFAICS, --encrypted was
a no-op even before this patch, because createuser encrypted the password
before sending it to the server even if --encrypted was not specified. It
added the ENCRYPTED keyword to the SQL command, but since the password was
already in encrypted form, it didn't make any difference. The documentation
was not clear on whether that was intended or not, but it's moot now.
Also, while password_encryption='on' is still accepted as an alias for
'md5', it is now marked as hidden, so that it is not listed as an accepted
value in error hints, for example. That's not directly related to removing
'plain', but it seems better this way.
Reviewed by Michael Paquier
Discussion: https://www.postgresql.org/message-id/16e9b768-fd78-0b12-cfc1-7b6b7f238fde@iki.fi
Add updates for recent commits.
In passing, credit Etsuro Fujita for his work on the postgres_fdw
query cancel feature in 9.6; I seem to have missed that in the
original drafting of the 9.6 notes.
Improve description of logical decoding snapshot issues, per suggestion
from Petr Jelinek. Mention possible need to re-sync logical replicas
as a post-upgrade task. Minor copy-editing for some other items.
As usual, the release notes for other branches will be made by cutting
these down, but put them up for community review first. Note there
are some entries that really only apply to pre-9.6 branches.
When the checkpointer writes the shutdown checkpoint, it checks
afterwards whether any WAL has been written since it started and throws
a PANIC if so. At that point, only walsenders are still active, so one
might think this could not happen, but walsenders can also generate WAL,
for instance in BASE_BACKUP and certain variants of
CREATE_REPLICATION_SLOT. So they can trigger this panic if such a
command is run while the shutdown checkpoint is being written.
To fix this, divide the walsender shutdown into two phases. First, the
postmaster sends a SIGUSR2 signal to all walsenders. The walsenders
then put themselves into the "stopping" state. In this state, they
reject any new commands. (For simplicity, we reject all new commands,
so that in the future we do not have to track meticulously which
commands might generate WAL.) The checkpointer waits for all walsenders
to reach this state before proceeding with the shutdown checkpoint.
After the shutdown checkpoint is done, the postmaster sends
SIGINT (previously unused) to the walsenders. This triggers the
existing shutdown behavior of sending out the shutdown checkpoint record
and then terminating.
Author: Michael Paquier <michael.paquier@gmail.com>
Reported-by: Fujii Masao <masao.fujii@gmail.com>
password_encryption was a boolean before version 10, so cope with "on" and
"off".
Also, change the behavior with "plain", to treat it the same as "md5".
We're discussing removing the password_encryption='plain' option from the
server altogether, which will make this the only reasonable choice, but
even if we kept it, it seems best to never send the password in cleartext.
Move the OWNER and RENAME clauses to the end, so the interesting
functionality is listed first. This is more typical on nearby reference
pages, whereas the previous order was the order in which the clauses
were added.
Clarify that all changes except RESTART are transactional (since
1753b1b027035029c2a2a1649065762fafbf63f3).
Reported-by: Michael Paquier <michael.paquier@gmail.com>
This goes together with the changes made to enable replication on the
sending side by default (wal_level, max_wal_senders etc) by making the
receiving stadby node also enable it by default.
Huong Dangminh
Even though no actual tuples are ever inserted into a partitioned
table (the actual tuples are in the partitions, not the partitioned
table itself), we still need to have a ResultRelInfo for the
partitioned table, or per-statement triggers won't get fired.
Amit Langote, per a report from Rajkumar Raghuwanshi. Reviewed by me.
Discussion: http://postgr.es/m/CAKcux6%3DwYospCRY2J4XEFuVy0L41S%3Dfic7rmkbsU-GXhhSbmBg%40mail.gmail.com
Declarative partitioning duplicated the TypedTableElement productions,
evidently to remove the need to specify WITH OPTIONS when creating
partitions. Instead, simply make WITH OPTIONS optional in the
TypedTableElement production and remove all of the duplicate
PartitionElement-related productions. This change simplifies the
syntax and makes WITH OPTIONS optional when adding defaults, constraints
or storage parameters to columns when creating either typed tables or
partitions.
Also update pg_dump to no longer include WITH OPTIONS, since it's not
necessary, and update the documentation to reflect that WITH OPTIONS is
now optional.
There is no need to forbid ALTER TABLE ONLY on partitioned tables,
when no partitions exist yet. This can be handy for users who are
building up their partitioned table independently and will create actual
partitions later.
In addition, this is how pg_dump likes to operate in certain instances.
Author: Amit Langote, with some error message word-smithing by me
The reference "That is the topic of the next section." has been
incorrect since the materialized views documentation got inserted
between the section "rules-views" and "rules-update".
Author: Zertrin <postgres_wiki@zertrin.org>
It doesn't make any immediate difference to PostgreSQL, but might as well
follow the standard, since one exists. (I looked at RFC 5803 earlier, but
didn't fully understand it back then.)
The new format uses Base64 instead of hex to encode StoredKey and
ServerKey, which makes the verifiers slightly smaller. Using the same
encoding for the salt and the keys also means that you only need one
encoder/decoder instead of two. Although we have code in the backend to
do both, we are talking about teaching libpq how to create SCRAM verifiers
for PQencodePassword(), and libpq doesn't currently have any code for hex
encoding.
Bump catversion, because this renders any existing SCRAM verifiers in
pg_authid invalid.
Discussion: https://www.postgresql.org/message-id/351ba574-85ea-d9b8-9689-8c928dd0955d@iki.fi
