hashdesc.c was missing a couple of fields in its record descriptions, as
of:
- is_prev_bucket_same_wrt for SQUEEZE_PAGE.
- procid for INIT_META_PAGE.
- old_bucket_flag and new_bucket_flag for SPLIT_ALLOCATE_PAGE.
The author has noted the first hole, and I have spotted the others while
double-checking this area of the code. Note that the only data missing
now are the offsets stored in VACUUM_ONE_PAGE. We could perhaps add
them, if somebody sees value in this data, even if it makes the output
larger. These are discarded here.
Author: Kirill Reshke <reshkekirill@gmail.com>
Discussion: https://postgr.es/m/CALdSSPjc-OVwtZH0Xrkvg7n=2ZwdbMJzqrm_ed_CfjiAzuKVGg@mail.gmail.com
The startup process does not process shared invalidation messages, only
sending them, and never calls AtEOXact_SMgr() which clean up any
unpinned SMgrRelations. Hence, it is never able to free SMgrRelations
on a periodic basis, bloating its hashtable over time.
Like the checkpointer and the bgwriter, this commit takes a conservative
approach by freeing periodically SMgrRelations when replaying a
checkpoint record, either online or shutdown, so as the startup process
has a way to perform a periodic cleanup.
Issue caused by 21d9c3ee4e, so backpatch down to v17.
Author: Jingtang Zhang <mrdrivingduck@gmail.com>
Reviewed-by: Yuhang Qiu <iamqyh@gmail.com>
Discussion: https://postgr.es/m/28C687D4-F335-417E-B06C-6612A0BD5A10@gmail.com
Backpatch-through: 17
Commit fd6ec93bf8 and other previous work established the
principle that when an error is potentially reachable in case of on-disk
corruption but is not expected to be reached otherwise,
ERRCODE_DATA_CORRUPTED should be used. This allows log monitoring
software to search for evidence of corruption by filtering on the error
code.
Enhance the existing log messages emitted when the heap page is found to
be inconsistent with the VM by adding this error code.
Suggested-by: Andrey Borodin <x4mmm@yandex-team.ru>
Author: Melanie Plageman <melanieplageman@gmail.com>
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Discussion: https://postgr.es/m/87DD95AA-274F-4F4F-BAD9-7738E5B1F905%40yandex-team.ru
Previously, heap_xlog_visible() called visibilitymap_pin() even after
getting a buffer from XLogReadBufferForRedoExtended() -- which returns a
pinned buffer containing the specified block of the visibility map.
This would just have resulted in visibilitymap_pin() returning early
since the specified page was already present and pinned, but it was
confusing extraneous code, so remove it. It doesn't seem worth
backporting, though.
It appears to be an oversight in 2c03216.
While we are at it, remove two VM-related redundant asserts in the COPY
FREEZE code path. visibilitymap_set() already asserts that
PD_ALL_VISIBLE is set on the heap page and checks that the vmbuffer
contains the bits corresponding to the specified heap block, so callers
do not also need to check this.
Author: Melanie Plageman <melanieplageman@gmail.com>
Reported-by: Melanie Plageman <melanieplageman@gmail.com>
Reported-by: Kirill Reshke <reshkekirill@gmail.com>
Reviewed-by: Kirill Reshke <reshkekirill@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CALdSSPhu7WZd%2BEfQDha1nz%3DDC93OtY1%3DUFEdWwSZsASka_2eRQ%40mail.gmail.com
A test has been added to ensure that conflict-relevant data is not
prematurely removed when a concurrent prepared transaction is being
committed on the publisher.
This test introduces an injection point that simulates the presence of a
prepared transaction in the commit phase, validating that the system
correctly delays conflict slot advancement until the transaction is fully
committed.
Additionally, the test serves as a safeguard for developers, ensuring that
the acquisition of the commit timestamp does not occur before marking
DELAY_CHKPT_IN_COMMIT in RecordTransactionCommitPrepared.
Reported-by: Robert Haas <robertmhaas@gmail.com>
Author: Zhijie Hou <houzj.fnst@fujitsu.com>
Reviewed-by: shveta malik <shveta.malik@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Discussion: https://postgr.es/m/OS9PR01MB16913F67856B0DA2A909788129400A@OS9PR01MB16913.jpnprd01.prod.outlook.com
This commit fixes three issues:
1) When a disabled subscription is created with retain_dead_tuples set to true,
the launcher is not woken up immediately, which may lead to delays in creating
the conflict detection slot.
Creating the conflict detection slot is essential even when the subscription is
not enabled. This ensures that dead tuples are retained, which is necessary for
accurately identifying the type of conflict during replication.
2) Conflict-related data was unnecessarily retained when the subscription does
not have a table.
3) Conflict-relevant data could be prematurely removed before applying
prepared transactions on the publisher that are in the commit critical section.
This issue occurred because the backend executing COMMIT PREPARED was not
accounted for during the computation of oldestXid in the commit phase on
the publisher. As a result, the subscriber could advance the conflict
slot's xmin without waiting for such COMMIT PREPARED transactions to
complete.
We fixed this issue by identifying prepared transactions that are in the
commit critical section during computation of oldestXid in commit phase.
Author: Zhijie Hou <houzj.fnst@fujitsu.com>
Reviewed-by: shveta malik <shveta.malik@gmail.com>
Reviewed-by: Dilip Kumar <dilipbalaut@gmail.com>
Reviewed-by: Nisha Moond <nisha.moond412@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Discussion: https://postgr.es/m/OS9PR01MB16913DACB64E5721872AA5C02943BA@OS9PR01MB16913.jpnprd01.prod.outlook.com
Discussion: https://postgr.es/m/OS9PR01MB16913F67856B0DA2A909788129400A@OS9PR01MB16913.jpnprd01.prod.outlook.com
pg_lsn includes pg_lsn_in_internal() for the purpose of parsing a LSN
position for the GUC recovery_target_lsn (21f428ebde). It relies on a
boolean called "have_error" that would be set when the LSN parsing
fails, then let its callers handle any errors.
d9f7f5d32f has added support for soft error reporting. This commit
removes some boilerplate code and switches the routine to use soft error
reporting directly, giving to the callers of pg_lsn_in_internal()
the possibility to be fed the error message generated on failure.
pg_lsn_in_internal() routine is renamed to pg_lsn_in_safe(), for
consistency with other similar routines that are given an escontext.
Author: Amul Sul <sulamul@gmail.com>
Reviewed-by: Dean Rasheed <dean.a.rasheed@gmail.com>
Discussion: https://postgr.es/m/CAAJ_b96No5h5tRuR+KhcC44YcYUCw8WAHuLoqqyyop8_k3+JDQ@mail.gmail.com
SLRU bank locks are referred as "bank locks" or "SLRU bank locks" in the
code comments. The comments updated in this commit use the latter term.
Oversight in 53c2a97a92, that has replaced the single ControlLock by
the bank control locks.
Author: Julien Rouhaud <julien.rouhaud@free.fr>
Discussion: https://postgr.es/m/aLUT2UO8RjJOzZNq@jrouhaud
Backpatch-through: 17
This has been done historically because of get_database_name (which
since commit cb98e6fb8f belongs in lsyscache.c/h, so let's move it
there) and get_database_oid (which is in the right place, but whose
declaration should appear in pg_database.h rather than dbcommands.h).
Clean this up.
Also, xlogreader.h and stringinfo.h are no longer needed by dbcommands.h
since commit f1fd515b39, so remove them.
Author: Álvaro Herrera <alvherre@kurilemu.de>
Reviewed-by: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/202508191031.5ipojyuaswzt@alvherre.pgsql
Commit 4b754d6c1 introduced the concept of an excludeOnly scan key,
which cannot select matching index entries but can reject
non-matching tuples, for example a tsquery such as '!term'. There are
poorly-documented assumptions that such scan keys do not appear as the
first scan key. ginNewScanKey did nothing to ensure that, however,
with the result that certain GIN index searches could go into an
infinite loop while apparently-equivalent queries with the clauses in
a different order were fine.
Fix by teaching ginNewScanKey to place all excludeOnly scan keys
after all not-excludeOnly ones. So far as we know at present,
it might be sufficient to avoid the case where the very first
scan key is excludeOnly; but I'm not very convinced that there
aren't other dependencies on the ordering.
Bug: #19031
Reported-by: Tim Wood <washwithcare@gmail.com>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/19031-0638148643d25548@postgresql.org
Backpatch-through: 13
The CHECK_FOR_INTERRUPTS call in gingetbitmap turns out to be
inadequate to prevent a long uninterruptible loop, because
we now know a case where looping occurs within scanGetItem.
While the next patch will fix the bug that caused that, it
seems foolish to assume that no similar patterns are possible.
Let's do the CFI within scanGetItem's retry loop, instead.
This demonstrably allows canceling out of the loop exhibited
in bug #19031.
Bug: #19031
Reported-by: Tim Wood <washwithcare@gmail.com>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/19031-0638148643d25548@postgresql.org
Backpatch-through: 13
Commit 1585ff7387 changed GetTransactionSnapshot() to throw an error
if it's called during logical decoding, instead of returning the
historic snapshot. I made that change for extra protection, because a
historic snapshot can only be used to access catalog tables while
GetTransactionSnapshot() is usually called when you're executing
arbitrary queries. You might get very subtle visibility problems if
you tried to use the historic snapshot for arbitrary queries.
There's no built-in code in PostgreSQL that calls
GetTransactionSnapshot() during logical decoding, but it turns out
that the pglogical extension does just that, to evaluate row filter
expressions. You would get weird results if the row filter runs
arbitrary queries, but it is sane as long as you don't access any
non-catalog tables. Even though there are no checks to enforce that in
pglogical, a typical row filter expression does not access any tables
and works fine. Accessing tables marked with the user_catalog_table =
true option is also OK.
To fix pglogical with row filters, and any other extensions that might
do similar things, revert GetTransactionSnapshot() to return a
historic snapshot during logical decoding.
To try to still catch the unsafe usage of historic snapshots, add
checks in heap_beginscan() and index_beginscan() to complain if you
try to use a historic snapshot to scan a non-catalog table. We're very
close to the version 18 release however, so add those new checks only
in master.
Backpatch-through: 18
Reported-by: Noah Misch <noah@leadboat.com>
Reviewed-by: Noah Misch <noah@leadboat.com>
Discussion: https://www.postgresql.org/message-id/20250809222338.cc.nmisch@google.com
This provides a single entry point to access some information about the
state of MultiXacts, able to return some data about multixacts offsets
and counts. Originally this function was only able to return some
information about the number of multixacts and multixact members,
extended here to provide some data about the oldest multixact ID in use
and the oldest offset, if known.
This change has been proposed in a patch that aims at providing more
monitoring capabilities for multixacts, and it is useful on its own.
GetMultiXactInfo() is added to multixact.h, becoming available for
out-of-core code.
Extracted from a larger patch by the same author.
Author: Naga Appani <nagnrik@gmail.com>
Reviewed-by: Ashutosh Bapat <ashutosh.bapat.oss@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/CA+QeY+AAsYK6WvBW4qYzHz4bahHycDAY_q5ECmHkEV_eB9ckzg@mail.gmail.com
Two header declarations were related to SQL-callable functions, that
should have been cleaned up in df9133fa63. Some more includes can be
removed on closer inspection, so let's clean up these as well, while on
it.
Reported-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/345438.1755524834@sss.pgh.pa.us
Doing that seems rather random and unnecessary. This commit removes
those and fixes fallout, which is pretty minimal. We do need to add a
forward declaration of struct TM_IndexDeleteOp (whose full definition
appears in tableam.h) so that _bt_delitems_delete_check()'s declaration
can use it.
Author: Álvaro Herrera <alvherre@kurilemu.de>
Reviewed-by: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Discussion: https://postgr.es/m/202508051109.lzk3lcuzsaxo@alvherre.pgsql
Remove conditionally-compiled code for the other case.
Replace uses of FLOAT8PASSBYVAL with constant "true", mainly because
it was quite confusing in cases where the type we were dealing with
wasn't float8.
I left the associated pg_control and Pg_magic_struct fields in place.
Perhaps we should get rid of them, but it would save little, so it
doesn't seem worth thinking hard about the compatibility implications.
I just labeled them "vestigial" in places where that seemed helpful.
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Discussion: https://postgr.es/m/1749799.1752797397@sss.pgh.pa.us
Remove conditionally-compiled code for smaller Datum widths,
and simplify comments that describe cases no longer of interest.
I also fixed up a few more places that were not using
DatumGetIntXX where they should, and made some cosmetic
adjustments such as using sizeof(int64) not sizeof(Datum)
in places where that fit better with the surrounding code.
One thing I remembered while preparing this part is that SP-GiST
stores pass-by-value prefix keys as Datums, so that the on-disk
representation depends on sizeof(Datum). That's even more
unfortunate than the existing commentary makes it out to be,
because now there is a hazard that the change of sizeof(Datum)
will break SP-GiST indexes on 32-bit machines. It appears that
there are no existing SP-GiST opclasses that are actually
affected; and if there are some that I didn't find, the number
of installations that are using them on 32-bit machines is
doubtless tiny. So I'm proceeding on the assumption that we
can get away with this, but it's something to worry about.
(gininsert.c looks like it has a similar problem, but it's okay
because the "tuples" it's constructing are just transient data
within the tuplesort step. That's pretty poorly documented
though, so I added some comments.)
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Discussion: https://postgr.es/m/1749799.1752797397@sss.pgh.pa.us
The result of "DirectFunctionCall1(numeric_float8, d)" is already in
Datum form, but the code was incorrectly applying PG_RETURN_FLOAT8()
to it. On machines where float8 is pass-by-reference, this would
result in complete garbage, since an unpredictable pointer value
would be treated as an integer and then converted to float. It's not
entirely clear how much of a problem would ensue on 64-bit hardware,
but certainly interpreting a float8 bitpattern as uint64 and then
converting that to float isn't the intended behavior.
As luck would have it, even the complete-garbage case doesn't break
BRIN indexes, since the results are only used to make choices about
how to merge values into ranges: at worst, we'd make poor choices
resulting in an inefficient index. Doubtless that explains the lack
of field complaints. However, users with BRIN indexes that use the
numeric_minmax_multi_ops opclass may wish to reindex in hopes of
making their indexes more efficient.
Author: Peter Eisentraut <peter@eisentraut.org>
Co-authored-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/2093712.1753983215@sss.pgh.pa.us
Backpatch-through: 14
Macros like VARDATA() and VARSIZE() should be thought of as taking
values of type pointer to struct varlena or some other related struct.
The way they are implemented, you can pass anything to it and it will
cast it right. But this is in principle incorrect. To fix, add the
required DatumGetPointer() calls. Or in a couple of cases, remove
superfluous PointerGetDatum() calls.
It is planned in a subsequent patch to change macros like VARDATA()
and VARSIZE() to inline functions, which will enforce stricter typing.
This is in preparation for that.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/928ea48f-77c6-417b-897c-621ef16685a6%40eisentraut.org
In the current system architecture, none of these are worth obsessing
over; most are once-per-process leaks. However, Valgrind complains
about all of them, and if we get to using threads rather than
processes for backend sessions, it will become more interesting to
avoid per-session leaks.
* Fix leaks in StartupXLOG() and ShutdownWalRecovery().
* Fix leakage of pq_mq_handle in a parallel worker.
While at it, move mq_putmessage's "Assert(pq_mq_handle != NULL)"
to someplace where it's not trivially useless.
* Fix leak in logicalrep_worker_detach().
* Don't leak the startup-packet buffer in ProcessStartupPacket().
* Fix leak in evtcache.c's DecodeTextArrayToBitmapset().
If the presented array is toasted, this neglected to free the
detoasted copy, which was then leaked into EventTriggerCacheContext.
* I'm distressed by the amount of code that BuildEventTriggerCache
is willing to run while switched into a long-lived cache context.
Although the detoasted array is the only leak that Valgrind reports,
let's tighten things up while we're here. (DecodeTextArrayToBitmapset
is still run in the cache context, so doing this doesn't remove the
need for the detoast fix. But it reduces the surface area for other
leaks.)
* load_domaintype_info() intentionally leaked some intermediate cruft
into the long-lived DomainConstraintCache's memory context, reasoning
that the amount of leakage will typically not be much so it's not
worth doing a copyObject() of the final tree to avoid that. But
Valgrind knows nothing of engineering tradeoffs and complains anyway.
On the whole, the copyObject doesn't cost that much and this is surely
not a performance-critical code path, so let's do it the clean way.
* MarkGUCPrefixReserved didn't bother to clean up removed placeholder
GUCs at all, which shows up as a leak in one regression test.
It seems appropriate for it to do as much cleanup as
define_custom_variable does when replacing placeholders, so factor
that code out into a helper function. define_custom_variable's logic
was one brick shy of a load too: it forgot to free the separate
allocation for the placeholder's name.
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Richard Guo <guofenglinux@gmail.com>
Discussion: https://postgr.es/m/285483.1746756246@sss.pgh.pa.us
The callback added in fc415edf8c used to check if there is any pending
data to flush for fixed-numbered statistics, done by looping across all
the builtin and custom stats kinds with a call to have_fixed_pending_cb,
is proving to able to show in workloads that do not report any stats
(read-only, no function calls, no WAL, no IO, etc). The code used in
v17 was cheaper than that what HEAD has introduced, relying on three
boolean checks for WAL, SLRU and IO stats.
This commit switches the code to use a more efficient approach than
fc415edf8c, with a single boolean flag that can be switched to "true"
by any fixed-numbered stats kinds to force pgstat_report_stat() to go
through one round of reports. The flag is reset by pgstat_report_stat()
once a full round of reports is done. The flag being false means that
fixed-numbered stats kinds saw no activity, and that there is no pending
data to flush.
ac000fca74 took one step in improving the performance by reducing the
number of stats kinds that the backend can hold. This commit takes a
more drastic step by bringing back the code efficiency to what it was
before v18 with a cheap check at the beginning of pgstat_report_stat()
for its fast-exit path.
The callback have_static_pending_cb is removed as an effect of all that.
Reported-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Discussion: https://postgr.es/m/eb224uegsga2hgq7dfq3ps5cduhpqej7ir2hjxzzozjthrekx5@dysei6buqthe
Backpatch-through: 18
Similar checks are done for the mandatory table AM callbacks. A portion
of the index AM callbacks are optional and can be NULL; the rest is
mandatory and is documented as such in the documentation and in amapi.h.
These checks are useful to detect quickly if all the mandatory callbacks
are defined when implementing a new index access method, as the
assertions are run when loading the AM.
Author: Japin Li <japinli@hotmail.com>
Discussion: https://postgr.es/m/ME0P300MB0445795D31CEAB92C58B41FDB651A@ME0P300MB0445.AUSP300.PROD.OUTLOOK.COM
This function is declared as returning a uint8, but it returns a
bool in one code path. To fix, return (uint8) 0 instead of false
there. This should behave exactly the same as before, but it might
prevent future compiler complaints.
Oversight in commit a892234f83.
Author: Julien Rouhaud <rjuju123@gmail.com>
Discussion: https://postgr.es/m/aIHluT2isN58jqHV%40jrouhaud
Logical replication requires reliable conflict detection to maintain data
consistency across nodes. To achieve this, we must prevent premature
removal of tuples deleted by other origins and their associated commit_ts
data by VACUUM, which could otherwise lead to incorrect conflict reporting
and resolution.
This patch introduces a mechanism to retain deleted tuples on the
subscriber during the application of concurrent transactions from remote
nodes. Retaining these tuples allows us to correctly ignore concurrent
updates to the same tuple. Without this, an UPDATE might be misinterpreted
as an INSERT during resolutions due to the absence of the original tuple.
Additionally, we ensure that origin metadata is not prematurely removed by
vacuum freeze, which is essential for detecting update_origin_differs and
delete_origin_differs conflicts.
To support this, a new replication slot named pg_conflict_detection is
created and maintained by the launcher on the subscriber. Each apply
worker tracks its own non-removable transaction ID, which the launcher
aggregates to determine the appropriate xmin for the slot, thereby
retaining necessary tuples.
Conflict information retention (deleted tuples and commit_ts) can be
enabled per subscription via the retain_conflict_info option. This is
disabled by default to avoid unnecessary overhead for configurations that
do not require conflict resolution or logging.
During upgrades, if any subscription on the old cluster has
retain_conflict_info enabled, a conflict detection slot will be created to
protect relevant tuples from deletion when the new cluster starts.
This is a foundational work to correctly detect update_deleted conflict
which will be done in a follow-up patch.
Author: Zhijie Hou <houzj.fnst@fujitsu.com>
Reviewed-by: shveta malik <shveta.malik@gmail.com>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-by: Dilip Kumar <dilipbalaut@gmail.com>
Reviewed-by: Nisha Moond <nisha.moond412@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Discussion: https://postgr.es/m/OS0PR01MB5716BE80DAEB0EE2A6A5D1F5949D2@OS0PR01MB5716.jpnprd01.prod.outlook.com
If a crash occurs while writing a WAL record that spans multiple pages, the
recovery process marks the page with the XLP_FIRST_IS_OVERWRITE_CONTRECORD
flag. However, logical decoding currently attempts to read the full WAL
record based on its expected size before checking this flag, which can lead
to an infinite wait if the remaining data is never written (e.g., no activity
after crash).
This patch updates the logic first to read the page header and check for
the XLP_FIRST_IS_OVERWRITE_CONTRECORD flag before attempting to reconstruct
the full WAL record. If the flag is set, decoding correctly identifies
the record as incomplete and avoids waiting for WAL data that will never
arrive.
Discussion: https://postgr.es/m/CAAKRu_ZCOzQpEumLFgG_%2Biw3FTa%2BhJ4SRpxzaQBYxxM_ZAzWcA%40mail.gmail.com
Discussion: https://postgr.es/m/CALDaNm34m36PDHzsU_GdcNXU0gLTfFY5rzh9GSQv%3Dw6B%2BQVNRQ%40mail.gmail.com
Author: Vignesh C <vignesh21@gmail.com>
Reviewed-by: Hayato Kuroda <kuroda.hayato@fujitsu.com>
Reviewed-by: Dilip Kumar <dilipbalaut@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Alexander Korotkov <aekorotkov@gmail.com>
Backpatch-through: 13
_bt_first need only store one ScanKeyData struct on the stack for the
purposes of building an IS NOT NULL key based on an implied NOT NULL
constraint. We don't need INDEX_MAX_KEYS-many ScanKeyData structs.
This saves us a little over 2KB in stack space. It's possible that this
has some performance benefit. It also seems simpler and more direct.
It isn't possible for more than a single index attribute to need its own
implied IS NOT NULL key: the first such attribute/IS NOT NULL key always
makes _bt_first stop adding additional boundary keys to startKeys[].
Using INDEX_MAX_KEYS-many ScanKeyData entries was (at best) misleading.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Mircea Cadariu <cadariu.mircea@gmail.com>
Discussion: https://postgr.es/m/CAH2-Wzm=1kJMSZhhTLoM5BPbwQNWxUj-ynOEh=89ptDZAVgauw@mail.gmail.com
This code used a NO_LZ4_SUPPORT() macro to issue an error in the code
paths where LZ4 [de]compression is attempted but the build does not
support it. This commit refactors the code to use a more flexible error
message so as it can be used for other compression methods, where the
method is given in input of macro.
Extracted from a larger patch by the same author.
Author: Nikhil Kumar Veldanda <veldanda.nikhilkumar17@gmail.com>
Reviewed-by: Kirill Reshke <reshkekirill@gmail.com>
Discussion: https://postgr.es/m/CAFAfj_HX84EK4hyRYw50AOHOcdVi-+FFwAAPo7JHx4aShCvunQ@mail.gmail.com
The new name more accurately reflects the effects of this flag on a
requested checkpoint. Checkpoint-related log messages (i.e., those
controlled by the log_checkpoints configuration parameter) will now
say "fast" instead of "immediate", too. Likewise, references to
"immediate" checkpoints in the documentation have been updated to
say "fast". This is preparatory work for a follow-up commit that
will add a MODE option to the CHECKPOINT command.
Author: Christoph Berg <myon@debian.org>
Discussion: https://postgr.es/m/aDnaKTEf-0dLiEfz%40msg.df7cb.de
The new name more accurately relects the effects of this flag on a
requested checkpoint. Checkpoint-related log messages (i.e., those
controlled by the log_checkpoints configuration parameter) will now
say "flush-unlogged" instead of "flush-all", too. This is
preparatory work for a follow-up commit that will add a
FLUSH_UNLOGGED option to the CHECKPOINT command.
Author: Christoph Berg <myon@debian.org>
Discussion: https://postgr.es/m/aDnaKTEf-0dLiEfz%40msg.df7cb.de
Previously, the check_hook functions for max_slot_wal_keep_size and
idle_replication_slot_timeout would incorrectly raise an ERROR for values
set in postgresql.conf during upgrade, even though those values were not
actively used in the upgrade process.
To prevent logical slot invalidation during upgrade, we used to set
special values for these GUCs. Now, instead of relying on those values, we
directly prevent WAL removal and logical slot invalidation caused by
max_slot_wal_keep_size and idle_replication_slot_timeout.
Note: PostgreSQL 17 does not include the idle_replication_slot_timeout
GUC, so related changes were not backported.
BUG #18979
Reported-by: jorsol <jorsol@gmail.com>
Author: Dilip Kumar <dilipbalaut@gmail.com>
Reviewed by: vignesh C <vignesh21@gmail.com>
Reviewed by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Backpatch-through: 17, where it was introduced
Discussion: https://postgr.es/m/219561.1751826409@sss.pgh.pa.us
Discussion: https://postgr.es/m/18979-a1b7fdbb7cd181c6@postgresql.org
This commit standardizes the output format for LSNs to ensure consistent
representation across various tools and messages. Previously, LSNs were
inconsistently printed as `%X/%X` in some contexts, while others used
zero-padding. This often led to confusion when comparing.
To address this, the LSN format is now uniformly set to `%X/%08X`,
ensuring the lower 32-bit part is always zero-padded to eight
hexadecimal digits.
Author: Japin Li <japinli@hotmail.com>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-by: Álvaro Herrera <alvherre@kurilemu.de>
Discussion: https://postgr.es/m/ME0P300MB0445CA53CA0E4B8C1879AF84B641A@ME0P300MB0445.AUSP300.PROD.OUTLOOK.COM
This refactoring is a follow-up of the work done in 5a1dfde833, that
has switched 2PC file names to use FullTransactionIds when written on
disk. This will help with the integration of a follow-up solution
related to the handling of two-phase files during recovery, to address
older defects while reading these from disk after a crash.
This change is useful in itself as it reduces the need to build the
file names from epoch numbers and TransactionIds, because we can use
directly FullTransactionIds from which the 2PC file names are guessed.
So this avoids a lot of back-and-forth between the FullTransactionIds
retrieved from the file names and how these are passed around in the
internal 2PC logic.
Note that the core of the change is the use of a FullTransactionId
instead of a TransactionId in GlobalTransactionData, that tracks 2PC
file information in shared memory. The change in TwoPhaseCallback makes
this commit unfit for stable branches.
Noah has contributed a good chunk of this patch. I have spent some time
on it as well while working on the issues with two-phase state files and
recovery.
Author: Noah Misch <noah@leadboat.com>
Co-Authored-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/Z5sd5O9JO7NYNK-C@paquier.xyz
Discussion: https://postgr.es/m/20250116205254.65.nmisch@google.com
Attempting to use commit timestamps during bootstrapping leads to an
assertion failure, that can be reached for example with an initdb -c
that enables track_commit_timestamp. It makes little sense to register
a commit timestamp for a BootstrapTransactionId, so let's disable the
activation of the module in this case.
This problem has been independently reported once by each author of this
commit. Each author has proposed basically the same patch, relying on
IsBootstrapProcessingMode() to skip the use of commit_ts during
bootstrap. The test addition is a suggestion by me, and is applied down
to v16.
Author: Hayato Kuroda <kuroda.hayato@fujitsu.com>
Author: Andy Fan <zhihuifan1213@163.com>
Reviewed-by: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Reviewed-by: Fujii Masao <masao.fujii@oss.nttdata.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/OSCPR01MB14966FF9E4C4145F37B937E52F5102@OSCPR01MB14966.jpnprd01.prod.outlook.com
Discussion: https://postgr.es/m/87plejmnpy.fsf@163.com
Backpatch-through: 13
Currently check_recovery_target_timeline() converts any value that is
not "current", "latest", or a valid integer to 0. So, for example, the
following configuration added to postgresql.conf followed by a startup:
recovery_target_timeline = 'bogus'
recovery_target_timeline = '9999999999'
... results in the following error patterns:
FATAL: 22023: recovery target timeline 0 does not exist
FATAL: 22023: recovery target timeline 1410065407 does not exist
This is confusing, because the server does not reflect the intention of
the user, and just reports incorrect data unrelated to the GUC.
The origin of the problem is that we do not perform a range check in the
GUC value passed-in for recovery_target_timeline. This commit improves
the situation by using strtou64() and by providing stricter range
checks. Some test cases are added for the cases of an incorrect, an
upper-bound and a lower-bound timeline value, checking the sanity of the
reports based on the contents of the server logs.
Author: David Steele <david@pgmasters.net>
Discussion: https://postgr.es/m/e5d472c7-e9be-4710-8dc4-ebe721b62cea@pgbackrest.org
Restore nbtree preprocessing comments describing how we mark nbtree row
compare members required to how they were prior to 2016 bugfix commit
a298a1e0.
Oversight in commit bd3f59fd, which made nbtree preprocessing revert to
the original 2006 rules, but neglected to revert these comments.
Backpatch-through: 18
Recent nbtree bugfix commit 5f4d98d4 added a special case to the code
that sets up a page-level prefix of keys that are definitely satisfied
by every tuple on the page: whenever _bt_set_startikey reached a row
compare key, we'd refuse to apply the pstate.forcenonrequired behavior
in scans where that usually happens (scans with a higher-order array
key). That hack made the scan avoid essentially the same infinite
cycling behavior that also affected nbtree scans with redundant keys
(keys that preprocessing could not eliminate) prior to commit f09816a0.
There are now serious doubts about this row compare workaround.
Testing has shown that a scan with a row compare key and an array key
could still read the same leaf page twice (without the scan's direction
changing), which isn't supposed to be possible following the SAOP
enhancements added by Postgres 17 commit 5bf748b8. Also, we still
allowed a required row compare key to be used with forcenonrequired mode
when its header key happened to be beyond the pstate.ikey set by
_bt_set_startikey, which was complicated and brittle.
The underlying problem was that row compares had inconsistent rules
around how scans start (which keys can be used for initial positioning
purposes) and how scans end (which keys can set continuescan=false).
Quals with redundant keys that could not be eliminated by preprocessing
also had that same quality to them prior to today's bugfix f09816a0. It
now seems prudent to bring row compare keys in line with the new charter
for required keys, by making the start and end rules symmetric.
This commit fixes two points of disagreement between _bt_first and
_bt_check_rowcompare. Firstly, _bt_check_rowcompare was capable of
ending the scan at the point where it needed to compare an ISNULL-marked
row compare member that came immediately after a required row compare
member. _bt_first now has symmetric handling for NULL row compares.
Secondly, _bt_first had its own ideas about which keys were safe to use
for initial positioning purposes. It could use fewer or more keys than
_bt_check_rowcompare. _bt_first now uses the same requiredness markings
as _bt_check_rowcompare for this.
Now that _bt_first and _bt_check_rowcompare agree on how to start and
end scans, we can get rid of the forcenonrequired special case, without
any risk of infinite cycling. This approach also makes row compare keys
behave more like regular scalar keys, particularly within _bt_first.
Fixing these inconsistencies necessitates dealing with a related issue
with the way that row compares were marked required by preprocessing: we
didn't mark any lower-order row members required following 2016 bugfix
commit a298a1e0. That approach was over broad. The bug in question was
actually an oversight in how _bt_check_rowcompare dealt with tuple NULL
values that failed to satisfy a scan key marked required in the opposite
scan direction (it was a bug in 2011 commits 6980f817 and 882368e8, not
a bug in 2006 commit 3a0a16cb). Go back to marking row compare members
as required using the original 2006 rules, and fix the 2016 bug in a
more principled way: by limiting use of the "set continuescan=false with
a key required in the opposite scan direction upon encountering a NULL
tuple value" optimization to the first/most significant row member key.
While it isn't safe to use an implied IS NOT NULL qualifier to end the
scan when it comes from a required lower-order row compare member key,
it _is_ generally safe for such a required member key to end the scan --
provided the key is marked required in the _current_ scan direction.
This fixes what was arguably an oversight in either commit 5f4d98d4 or
commit 8a510275. It is a direct follow-up to today's commit f09816a0.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Heikki Linnakangas <heikki.linnakangas@iki.fi>
Discussion: https://postgr.es/m/CAH2-Wz=pcijHL_mA0_TJ5LiTB28QpQ0cGtT-ccFV=KzuunNDDQ@mail.gmail.com
Backpatch-through: 18
