pgsql-hackers. pg_opclass now has a row for each opclass supported by each
index AM, not a row for each opclass name. This allows pg_opclass to show
directly whether an AM supports an opclass, and furthermore makes it possible
to store additional information about an opclass that might be AM-dependent.
pg_opclass and pg_amop now store "lossy" and "haskeytype" information that we
previously expected the user to remember to provide in CREATE INDEX commands.
Lossiness is no longer an index-level property, but is associated with the
use of a particular operator in a particular index opclass.
Along the way, IndexSupportInitialize now uses the syscaches to retrieve
pg_amop and pg_amproc entries. I find this reduces backend launch time by
about ten percent, at the cost of a couple more special cases in catcache.c's
IndexScanOK.
Initial work by Oleg Bartunov and Teodor Sigaev, further hacking by Tom Lane.
initdb forced.
for speed reasons; its result type also changes to int8. avg() on these
datatypes now accumulates the running sum in int8 for speed; but we still
deliver the final result as numeric, so that fractional accuracy is
preserved.
count() now counts and returns in int8, not int4. I am a little nervous
about this possibly breaking users' code, but there didn't seem to be
a strong sentiment for avoiding the problem. If we get complaints during
beta, we can change count back to int4 and add a "count8" aggregate.
For that matter, users can do it for themselves with a simple CREATE
AGGREGATE command; the int4inc function is still present, so no C hacking
is needed.
Also added max() and min() aggregates for OID that do proper unsigned
comparison, instead of piggybacking on int4 aggregates.
initdb forced.
default, but OIDS are removed from many system catalogs that don't need them.
Some interesting side effects: TOAST pointers are 20 bytes not 32 now;
pg_description has a three-column key instead of one.
Bugs fixed in passing: BINARY cursors work again; pg_class.relhaspkey
has some usefulness; pg_dump dumps comments on indexes, rules, and
triggers in a valid order.
initdb forced.
Note: I didn't force an initdb, figuring that one today was enough.
However, there is a new function in pg_proc.h, and pg_dump won't be
able to dump partial indexes until you add that function.
validity checking rules for VACUUM. Make some other rearrangements of the
VACUUM code to allow more code to be shared between full and lazy VACUUM.
Minor code cleanups and added comments for TransactionId manipulations.
stub) into the rest of the system. Adopt a cleaner approach to preventing
deadlock in concurrent heap_updates: allow RelationGetBufferForTuple to
select any page of the rel, and put the onus on it to lock both buffers
in a consistent order. Remove no-longer-needed isExtend hack from
API of ReleaseAndReadBuffer.
do anything yet, but it has the necessary connections to initialization
and so forth. Make some gestures towards allowing number of blocks in
a relation to be BlockNumber, ie, unsigned int, rather than signed int.
(I doubt I got all the places that are sloppy about it, yet.) On the
way, replace the hardwired NLOCKS_PER_XACT fudge factor with a GUC
variable.
IS TRUE, etc, with some degree of verisimilitude. Split out
selectivity support functions from builtins.h into a new header
file selfuncs.h, so as to reduce the number of header files builtins.h
must depend on. Fix a few missing inclusions exposed thereby.
From Joe Conway, with some kibitzing from Tom Lane.
SI messages now include the relevant database OID, so that operations
in one database do not cause useless cache flushes in backends attached
to other databases. Declare SI messages properly using a union, to
eliminate the former assumption that Oid is the same size as int or Index.
Rewrite the nearly-unreadable code in inval.c, and document it better.
Arrange for catcache flushes at end of command/transaction to happen before
relcache flushes do --- this avoids loading a new tuple into the catcache
while setting up new relcache entry, only to have it be flushed again
immediately.
Cygwin with the possible exception of mSQL-interface. Since I don't
have mSQL installed, I skipped this tool.
Except for dealing with a missing getopt.h (oid2name) and HUGE (seg),
the bulk of the patch uses the standard PostgreSQL approach to deal with
Windows DLL issues.
I tested the build aspect of this patch under Cygwin and Linux without
any ill affects. Note that I did not actually attempt to test the code
for functionality.
The procedure to apply the patch is as follows:
$ # save the attachment as /tmp/contrib.patch
$ # change directory to the top of the PostgreSQL source tree
$ patch -p0 </tmp/contrib.patch
Jason
CatalogCacheFlushRelation (formerly called SystemCacheRelationFlushed)
how to distinguish tuples it should flush from those it needn't; this
means a relcache flush event now only removes the catcache entries
it ought to, rather than zapping the caches completely as it used to.
Testing with the regression tests indicates that this considerably
improves the lifespan of catcache entries. Also, rearrange catcache
data structures so that the limit on number of cached tuples applies
globally across all the catcaches, rather than being per-catcache.
It was a little silly to have the same size limit on both, say,
pg_attribute caches and pg_am caches (there being only four possible
rows in the latter...). Doing LRU removal across all the caches
instead of locally in each one should reduce cache reload traffic
in the more heavily used caches and improve the efficiency of
cache memory use.
Tom Lane). For the moment, only the OID/name variants are provided.
I didn't force initdb, but the additions to the 'privileges' regress
test won't pass until you do one.
inet(text), cidr(text): convert a text value into inet/cidr
set_masklen(inet): set masklen on the inet value
Patch also contains regression checks for these functions.
Alex Pilosov
datatypes, not only strings. parse_hook is useless for bool, I suppose,
but it seems possibly useful for int and double to apply variable-specific
constraints that are more complex than simple range limits. assign_hook
is definitely useful for all datatypes --- we need it right now for bool
to support date cache reset when changing Australian timezone rule setting.
Also, clean up some residual problems with the reset all/show all patch,
including memory leaks and mistaken reset of PostPortNumber. It seems
best that RESET ALL not touch variables that don't have SUSET or
USERSET context.
It "make"s and "make check"s clean against current cvs tip.
There are now both Text and Name variants, and the regression test support
is rolled into the patch. Note that to be complete wrt Name based variants,
there are now 12 user visible versions of has_table_privilege:
has_table_privilege(Text usename, Text relname, Text priv_type)
has_table_privilege(Text usename, Name relname, Text priv_type)
has_table_privilege(Name usename, Text relname, Text priv_type)
has_table_privilege(Name usename, Name relname, Text priv_type)
has_table_privilege(Text relname, Text priv_type) /* assumes current_user */
has_table_privilege(Name relname, Text priv_type) /* assumes current_user */
has_table_privilege(Text usename, Oid reloid, Text priv_type)
has_table_privilege(Name usename, Oid reloid, Text priv_type)
has_table_privilege(Oid reloid, Text priv_type) /* assumes current_user */
has_table_privilege(Oid usesysid, Text relname, Text priv_type)
has_table_privilege(Oid usesysid, Name relname, Text priv_type)
has_table_privilege(Oid usesysid, Oid reloid, Text priv_type)
For the Text based inputs, a new internal function, get_Name is used
(shamelessly copied from get_seq_name in sequence.c) to downcase if not
quoted, or remove quotes if quoted, and truncate. I also added a few test
cases for the downcasing, quote removal, and Name based variants to the
regression test.
Joe Conway
pg_database now has unique indexes on oid and on datname.
pg_shadow now has unique indexes on usename and on usesysid.
pg_am now has unique index on oid.
pg_opclass now has unique index on oid.
pg_amproc now has unique index on amid+amopclaid+amprocnum.
Remove pg_rewrite's unnecessary index on oid, delete unused RULEOID syscache.
Remove index on pg_listener and associated syscache for performance reasons
(caching rows that are certain to change before you need 'em again is
rather pointless).
Change pg_attrdef's nonunique index on adrelid into a unique index on
adrelid+adnum.
Fix various incorrect settings of pg_class.relisshared, make that the
primary reference point for whether a relation is shared or not.
IsSharedSystemRelationName() is now only consulted to initialize relisshared
during initial creation of tables and indexes. In theory we might now
support shared user relations, though it's not clear how one would get
entries for them into pg_class &etc of multiple databases.
Fix recently reported bug that pg_attribute rows created for an index all have
the same OID. (Proof that non-unique OID doesn't matter unless it's
actually used to do lookups ;-))
There's no need to treat pg_trigger, pg_attrdef, pg_relcheck as bootstrap
relations. Convert them into plain system catalogs without hardwired
entries in pg_class and friends.
Unify global.bki and template1.bki into a single init script postgres.bki,
since the alleged distinction between them was misleading and pointless.
Not to mention that it didn't work for setting up indexes on shared
system relations.
Rationalize locking of pg_shadow, pg_group, pg_attrdef (no need to use
AccessExclusiveLock where ExclusiveLock or even RowExclusiveLock will do).
Also, hold locks until transaction commit where necessary.
for GRANT/REVOKE is now just that, not "CHANGE".
On the way, migrate some of the aclitem internal representation away from
the parser and build a real parse tree instead. Also add some 'const'
qualifiers.
copy PUBLIC access rights into each newly created ACL entry. Instead
treat each ACL entry as independent flags. Also clean up some ugliness
in acl.h API.
(vs. at the end of a normal sort). This ensures that explicit sorts
yield the same ordering as a btree index scan. To be really sure that
that equivalence holds, we use the btree entries in pg_amop to decide
whether we are looking at a '<' or '>' operator. For a sort operator
that has no btree association, we put the nulls at the front if the
operator is named '>' ... pretty grotty, but it does the right thing in
simple ASC and DESC cases, and at least there's no possibility of getting
a different answer depending on the plan type chosen.
report on old-style functions invoked by RI triggers. We had a number of
other places that were being sloppy about which memory context FmgrInfo
subsidiary data will be allocated in. Turns out none of them actually
cause a problem in 7.1, but this is for arcane reasons such as the fact
that old-style triggers aren't supported anyway. To avoid getting burnt
later, I've restructured the trigger support so that we don't keep trigger
FmgrInfo structs in relcache memory. Some other related cleanups too:
it's not really necessary to call fmgr_info at all while setting up
the index support info in relcache entries, because those ScanKeyEntry
structs are never used to invoke the functions. This should speed up
relcache initialization a tiny bit.
to do that, but inconsistently.) Make bit type reject too short input,
too, per SQL. Since it no longer zero pads, 'zpbit*' has been renamed to
'bit*' in the source, hence initdb.
- New functions to create a portal using a prepared/saved
SPI plan or lookup an existing portal by name.
- Functions to fetch/move from/in portals. Results are placed
in the usual SPI_processed and SPI_tuptable, so the entire
set of utility functions can be used to gain attribute access.
- Prepared/saved SPI plans now use their own memory context
and SPI_freeplan(plan) can remove them.
- Tuple result sets (SPI_tuptable) now uses it's own memory
context and can be free'd by SPI_freetuptable(tuptab).
Enhancement of PL/pgSQL
- Uses generic named portals internally in FOR ... SELECT
loops to avoid running out of memory on huge result sets.
- Support for CURSOR and REFCURSOR syntax using the new SPI
functionality. Cursors used internally only need no explicit
transaction block. Refcursor variables can be used inside
of explicit transaction block to pass cursors between main
application and functions.
Jan
collected by ANALYZE. Also, add some modest amount of intelligence to
guesses that are used for varlena columns in the absence of any ANALYZE
statistics. The 'width' reported by EXPLAIN is finally something less
than totally bogus for varlena columns ... and, in consequence, hashjoin
estimating should be a little better ...
a separate statement (though it can still be invoked as part of VACUUM, too).
pg_statistic redesigned to be more flexible about what statistics are
stored. ANALYZE now collects a list of several of the most common values,
not just one, plus a histogram (not just the min and max values). Random
sampling is used to make the process reasonably fast even on very large
tables. The number of values and histogram bins collected is now
user-settable via an ALTER TABLE command.
There is more still to do; the new stats are not being used everywhere
they could be in the planner. But the remaining changes for this project
should be localized, and the behavior is already better than before.
A not-very-related change is that sorting now makes use of btree comparison
routines if it can find one, rather than invoking '<' twice.
routine DetermineLocalTimeZone(). In that routine, be more wary of
broken mktime() implementations than the original code was: don't allow
mktime to change the already-set y/m/d/h/m/s information, and don't
use tm_gmtoff if mktime failed. Possibly this will resolve some of
the complaints we've been hearing from users of Middle Eastern timezones
on RedHat.
give consistent results for all datatypes. Types float4, float8, and
numeric were broken for NaN values; abstime, timestamp, and interval
were broken for INVALID values; timetz was just plain broken (some
possible pairs of values were neither < nor = nor >). Also clean up
text, bpchar, varchar, and bit/varbit to eliminate duplicate code and
thereby reduce the probability of similar inconsistencies arising in
the future.
accepts nnnLL syntax for long long constants. If so, decorate the CRC64
constants with LL to avoid warnings and/or erroneous results from certain
non-standards-compliant compilers.
