Use "a" and "an" correctly, mostly in comments. Two error messages were
also fixed (they were just elogs, so no translation work required). Two
function comments in pg_proc.h were also fixed. Etsuro Fujita reported one
of these, but I found a lot more with grep.
Also fix a few other typos spotted while grepping for the a/an typos.
For example, "consists out of ..." -> "consists of ...". Plus a "though"/
"through" mixup reported by Euler Taveira.
Many of these typos were in old code, which would be nice to backpatch to
make future backpatching easier. But much of the code was new, and I didn't
feel like crafting separate patches for each branch. So no backpatching.
Each WAL record now carries information about the modified relation and
block(s) in a standardized format. That makes it easier to write tools that
need that information, like pg_rewind, prefetching the blocks to speed up
recovery, etc.
There's a whole new API for building WAL records, replacing the XLogRecData
chains used previously. The new API consists of XLogRegister* functions,
which are called for each buffer and chunk of data that is added to the
record. The new API also gives more control over when a full-page image is
written, by passing flags to the XLogRegisterBuffer function.
This also simplifies the XLogReadBufferForRedo() calls. The function can dig
the relation and block number from the WAL record, so they no longer need to
be passed as arguments.
For the convenience of redo routines, XLogReader now disects each WAL record
after reading it, copying the main data part and the per-block data into
MAXALIGNed buffers. The data chunks are not aligned within the WAL record,
but the redo routines can assume that the pointers returned by XLogRecGet*
functions are. Redo routines are now passed the XLogReaderState, which
contains the record in the already-disected format, instead of the plain
XLogRecord.
The new record format also makes the fixed size XLogRecord header smaller,
by removing the xl_len field. The length of the "main data" portion is now
stored at the end of the WAL record, and there's a separate header after
XLogRecord for it. The alignment padding at the end of XLogRecord is also
removed. This compansates for the fact that the new format would otherwise
be more bulky than the old format.
Reviewed by Andres Freund, Amit Kapila, Michael Paquier, Alvaro Herrera,
Fujii Masao.
xlog.c is huge, this makes it a little bit smaller, which is nice. Functions
related to putting together the WAL record are in xloginsert.c, and the
lower level stuff for managing WAL buffers and such are in xlog.c.
Also move the definition of XLogRecord to a separate header file. This
causes churn in the #includes of all the files that write WAL records, and
redo routines, but it avoids pulling in xlog.h into most places.
Reviewed by Michael Paquier, Alvaro Herrera, Andres Freund and Amit Kapila.
Inserting a downlink to an internal page clears the incomplete-split flag
of the child's left sibling, so the left sibling's LSN also needs to be
updated and it needs to be marked dirty. The codepath for an insertion got
this right, but the case where the internal node is split because of
inserting the new downlink missed that.
GIN posting lists are now encoded using varbyte-encoding, which allows them
to fit in much smaller space than the straight ItemPointer array format used
before. The new encoding is used for both the lists stored in-line in entry
tree items, and in posting tree leaf pages.
To maintain backwards-compatibility and keep pg_upgrade working, the code
can still read old-style pages and tuples. Posting tree leaf pages in the
new format are flagged with GIN_COMPRESSED flag, to distinguish old and new
format pages. Likewise, entry tree tuples in the new format have a
GIN_ITUP_COMPRESSED flag set in a bit that was previously unused.
This patch bumps GIN_CURRENT_VERSION from 1 to 2. New indexes created with
version 9.4 will therefore have version number 2 in the metapage, while old
pg_upgraded indexes will have version 1. The code treats them the same, but
it might be come handy in the future, if we want to drop support for the
uncompressed format.
Alexander Korotkov and me. Reviewed by Tomas Vondra and Amit Langote.
Replace it with an approach similar to what GiST uses: when a page is split,
the left sibling is marked with a flag indicating that the parent hasn't been
updated yet. When the parent is updated, the flag is cleared. If an insertion
steps on a page with the flag set, it will finish split before proceeding
with the insertion.
The post-recovery cleanup mechanism was never totally reliable, as insertion
to the parent could fail e.g because of running out of memory or disk space,
leaving the tree in an inconsistent state.
This also divides the responsibility of WAL-logging more clearly between
the generic ginbtree.c code, and the parts specific to entry and posting
trees. There is now a common WAL record format for insertions and deletions,
which is written by ginbtree.c, followed by tree-specific payload, which is
returned by the placetopage- and split- callbacks.
Separate the insertion payload from the more static portions of GinBtree.
GinBtree now only contains information related to searching the tree, and
the information of what to insert is passed separately.
Add root block number to GinBtree, instead of passing it around all the
functions as argument.
Split off ginFinishSplit() from ginInsertValue(). ginFinishSplit is
responsible for finding the parent and inserting the downlink to it.
Split off the portion of ginInsertValue that inserts the tuple to current
level into a separate function, ginPlaceToPage. ginInsertValue's charter
is now to recurse up the tree to insert the downlink, when a page split is
required.
This is in preparation for a patch to change the way incomplete splits are
handled, which will need to do these operations separately. And IMHO makes
the code more readable anyway.
This creates a new gin-btree callback function for creating a downlink for
a page. Previously, ginxlog.c duplicated the logic used during normal
operation.
If a page is deleted, and reused for something else, just as a search is
following a rightlink to it from its left sibling, the search would continue
scanning whatever the new contents of the page are. That could lead to
incorrect query results, or even something more curious if the page is
reused for a different kind of a page.
To fix, modify the search algorithm to lock the next page before releasing
the previous one, and refrain from deleting pages from the leftmost branch
of the tree.
Add a new Concurrency section to the README, explaining why this works.
There is a lot more one could say about concurrency in GIN, but that's for
another patch.
Backpatch to all supported versions.
Merge the isEnoughSpace and placeToPage functions in the b-tree interface
into one function that tries to put a tuple on page, and returns false if
it doesn't fit.
Move createPostingTree function to gindatapage.c, and change its contract
so that it can be passed more items than fit on the root page. It's in a
better position than the callers to know how many items fit.
Move ginMergeItemPointers out of gindatapage.c, into a separate file.
These changes make no difference now, but reduce the footprint of Alexander
Korotkov's upcoming patch to pack item pointers more tightly.
Remove use of PageSetTLI() from all page manipulation functions
and adjust README to indicate change in the way we make changes
to pages. Repurpose those bytes into the pd_checksum field and
explain how that works in comments about page header.
Refactoring ahead of actual feature patch which would make use
of the checksum field, arriving later.
Jeff Davis, with comments and doc changes by Simon Riggs
Direction suggested by Robert Haas; many others providing
review comments.
The Solaris Studio compiler warns about these instances, unlike more
mainstream compilers such as gcc. But manual inspection showed that
the code is clearly not reachable, and we hope no worthy compiler will
complain about removing this code.
Make it clearer that the passed stack mustn't be empty, and that we
are not supposed to fall off the end of the stack in the main loop.
Tighten the loop that extracts the root block number, too.
Markus Wanner and Tom Lane
Per my recent proposal(s). Null key datums can now be returned by
extractValue and extractQuery functions, and will be stored in the index.
Also, placeholder entries are made for indexable items that are NULL or
contain no keys according to extractValue. This means that the index is
now always complete, having at least one entry for every indexed heap TID,
and so we can get rid of the prohibition on full-index scans. A full-index
scan is implemented much the same way as partial-match scans were already:
we build a bitmap representing all the TIDs found in the index, and then
drive the results off that.
Also, introduce a concept of a "search mode" that can be requested by
extractQuery when the operator requires matching to empty items (this is
just as cheap as matching to a single key) or requires a full index scan
(which is not so cheap, but it sure beats failing or giving wrong answers).
The behavior remains backward compatible for opclasses that don't return
any null keys or request a non-default search mode.
Using these features, we can now make the GIN index opclass for anyarray
behave in a way that matches the actual anyarray operators for &&, <@, @>,
and = ... which it failed to do before in assorted corner cases.
This commit fixes the core GIN code and ginarrayprocs.c, updates the
documentation, and adds some simple regression test cases for the new
behaviors using the array operators. The tsearch and contrib GIN opclass
support functions still need to be looked over and probably fixed.
Another thing I intend to fix separately is that this is pretty inefficient
for cases where more than one scan condition needs a full-index search:
we'll run duplicate GinScanEntrys, each one of which builds a large bitmap.
There is some existing logic to merge duplicate GinScanEntrys but it needs
refactoring to make it work for entries belonging to different scan keys.
Note that most of gin.h has been split out into a new file gin_private.h,
so that gin.h doesn't export anything that's not supposed to be used by GIN
opclasses or the rest of the backend. I did quite a bit of other code
beautification work as well, mostly fixing comments and choosing more
appropriate names for things.
This commit replaces pg_class.relistemp with pg_class.relpersistence;
and also modifies the RangeVar node type to carry relpersistence rather
than istemp. It also removes removes rd_istemp from RelationData and
instead performs the correct computation based on relpersistence.
For clarity, we add three new macros: RelationNeedsWAL(),
RelationUsesLocalBuffers(), and RelationUsesTempNamespace(), so that we
can clarify the purpose of each check that previous depended on
rd_istemp.
This is intended as infrastructure for the upcoming unlogged tables
patch, as well as for future possible work on global temporary tables.
The GIN code has absolutely no business exporting GIN-specific functions
with names as generic as compareItemPointers() or newScanKey(); that's
just trouble waiting to happen. I got annoyed about this again just now
and decided to fix it. This commit ensures that all global symbols
defined in access/gin/ have names including "gin" or "Gin". There were a
couple of cases, like names involving "PostingItem", where arguably the
names were already sufficiently nongeneric; but I figured as long as I was
risking creating merge problems for unapplied GIN patches I might as well
impose a uniform policy.
I didn't touch any static symbol names. There might be some places
where it'd be appropriate to rename some static functions to match
siblings that are exported, but I'll leave that for another time.
The better estimate requires more statistics than we previously stored:
in particular, counts of "entry" versus "data" pages within the index,
as well as knowledge of the number of distinct key values. We collect
this information during initial index build and update it during VACUUM,
storing the info in new fields on the index metapage. No initdb is
required because these fields will read as zeroes in a pre-existing
index, and the new gincostestimate code is coded to behave (reasonably)
sanely if they are zeroes.
Teodor Sigaev, reviewed by Jan Urbanski, Tom Lane, and Itagaki Takahiro.
struct representing a tree entry, rather than being a separately allocated
piece of storage. This API is at least as clean as the old one (if not
more so --- there were some bizarre choices in there) and it permits a
very substantial memory savings, on the order of 2X in ginbulk.c's usage.
Also, fix minor memory leaks in code called by ginEntryInsert, in
particular in ginInsertValue and entryFillRoot, as well as ginEntryInsert
itself. These leaks resulted in the GIN index build context continuing
to bloat even after we'd filled it to maintenance_work_mem and started
to dump data out to the index.
In combination these fixes restore the GIN index build code to honoring
the maintenance_work_mem limit about as well as it did in 8.4. Speed
seems on par with 8.4 too, maybe even a bit faster, for a non-pathological
case in which HEAD was formerly slower.
Back-patch to 9.0 so we don't have a performance regression from 8.4.
corresponding struct definitions. This allows other headers to avoid including
certain highly-loaded headers such as rel.h and relscan.h, instead using just
relcache.h, heapam.h or genam.h, which are more lightweight and thus cause less
unnecessary dependencies.
unnecessary #include lines in it. Also, move some tuple routine prototypes and
macros to htup.h, which allows removal of heapam.h inclusion from some .c
files.
For this to work, a new header file access/sysattr.h needed to be created,
initially containing attribute numbers of system columns, for pg_dump usage.
While at it, make contrib ltree, intarray and hstore header files more
consistent with our header style.
