performance issue during regular merge passes not only the 'final merge'
case. The original design contemplated that there would never be more
than about one free block per 'tape', hence no need for an efficient
method of keeping the free blocks sorted. But given the later addition
of merge preread behavior in tuplesort.c, there is likely to be about
work_mem worth of free blocks, which is not so small ... and for that
matter the number of tapes isn't necessarily small anymore either. So
we'd better get rid of the assumption entirely. Instead, I'm assuming
that the usage pattern will involve alternation between merge preread
and writing of a new run. This makes it reasonable to just add blocks
to the list without sorting during successive ltsReleaseBlock calls,
and then do a qsort() when we start getting ltsGetFreeBlock() calls.
Experimentation seems to confirm that there aren't many qsort calls
relative to the number of ltsReleaseBlock/ltsGetFreeBlock calls.
we are doing the final merge pass on-the-fly, and not writing the data
back onto a 'tape', the number of free blocks in the tape set will become
large, leading to a lot of time wasted in ltsReleaseBlock(). There is
really no need to track the free blocks anymore in this state, so add a
simple shutoff switch. Per report from Stefan Kaltenbrunner.
In particular, ensure that enlargement of the memtuples[] array doesn't
fall foul of MaxAllocSize when work_mem is very large, and don't bother
enlarging it if that would force an immediate switch into 'tape' mode anyway.
we'll go over to disk-based sort if we reach that limit.
This fixes Stefan Kaltenbrunner's observation that sorting can suffer an
'invalid memory alloc request size' failure when sort_mem is set large
enough. It's unfortunately not so easy to fix in 8.1 ...
each tuple, as per my proposal of several days ago. Also, clean up
sort memory management by keeping all working data in a separate memory
context, and refine the handling of low-memory conditions.
allocates the control data. The per-tape buffers are allocated only
on first use. This saves memory in situations where tuplesort.c
overestimates the number of tapes needed (ie, there are fewer runs
than tapes). Also, this makes legitimate the coding in inittapes()
that includes tape buffer space in the maximum-memory calculation:
when inittapes runs, we've already expended the whole allowed memory
on tuple storage, and so we'd better not allocate all the tape buffers
until we've flushed some tuples out of memory.
with fixed merge order (fixed number of "tapes") was based on obsolete
assumptions, namely that tape drives are expensive. Since our "tapes"
are really just a couple of buffers, we can have a lot of them given
adequate workspace. This allows reduction of the number of merge passes
with consequent savings of I/O during large sorts.
Simon Riggs with some rework by Tom Lane
comment line where output as too long, and update typedefs for /lib
directory. Also fix case where identifiers were used as variable names
in the backend, but as typedefs in ecpg (favor the backend for
indenting).
Backpatch to 8.1.X.
which is neither needed by nor related to that header. Remove the bogus
inclusion and instead include the header in those C files that actually
need it. Also fix unnecessary inclusions and bad inclusion order in
tsearch2 files.
Also performed an initial run through of upgrading our Copyright date to
extend to 2005 ... first run here was very simple ... change everything
where: grep 1996-2004 && the word 'Copyright' ... scanned through the
generated list with 'less' first, and after, to make sure that I only
picked up the right entries ...
TID (heap position). This doesn't do anything to the validity of the
finished index, but by pretending to qsort() that there are no really
equal keys in the sort, we can avoid performance problems with qsort
implementations that have trouble with large numbers of equal keys.
Patch from Manfred Koizar.
Make btree index creation and initial validation of foreign-key constraints
use maintenance_work_mem rather than work_mem as their memory limit.
Add some code to guc.c to allow these variables to be referenced by their
old names in SHOW and SET commands, for backwards compatibility.
pghackers proposal of 8-Nov. All the existing cross-type comparison
operators (int2/int4/int8 and float4/float8) have appropriate support.
The original proposal of storing the right-hand-side datatype as part of
the primary key for pg_amop and pg_amproc got modified a bit in the event;
it is easier to store zero as the 'default' case and only store a nonzero
when the operator is actually cross-type. Along the way, remove the
long-since-defunct bigbox_ops operator class.
Remove the 'strategy map' code, which was a large amount of mechanism
that no longer had any use except reverse-mapping from procedure OID to
strategy number. Passing the strategy number to the index AM in the
first place is simpler and faster.
This is a preliminary step in planned support for cross-datatype index
operations. I'm committing it now since the ScanKeyEntryInitialize()
API change touches quite a lot of files, and I want to commit those
changes before the tree drifts under me.
datatype by array_eq and array_cmp; use this to solve problems with memory
leaks in array indexing support. The parser's equality_oper and ordering_oper
routines also use the cache. Change the operator search algorithms to look
for appropriate btree or hash index opclasses, instead of assuming operators
named '<' or '=' have the right semantics. (ORDER BY ASC/DESC now also look
at opclasses, instead of assuming '<' and '>' are the right things.) Add
several more index opclasses so that there is no regression in functionality
for base datatypes. initdb forced due to catalog additions.
This makes no difference for existing uses, but allows SelectSortFunction()
and pred_test_simple_clause() to use indexscans instead of seqscans to
locate entries for a particular operator in pg_amop. Better yet, they can
use the SearchSysCacheList() API to cache the search results.
(materialization into a tuple store) discussed on pgsql-hackers earlier.
I've updated the documentation and the regression tests.
Notes on the implementation:
- I needed to change the tuple store API slightly -- it assumes that it
won't be used to hold data across transaction boundaries, so the temp
files that it uses for on-disk storage are automatically reclaimed at
end-of-transaction. I added a flag to tuplestore_begin_heap() to control
this behavior. Is changing the tuple store API in this fashion OK?
- in order to store executor results in a tuple store, I added a new
CommandDest. This works well for the most part, with one exception: the
current DestFunction API doesn't provide enough information to allow the
Executor to store results into an arbitrary tuple store (where the
particular tuple store to use is chosen by the call site of
ExecutorRun). To workaround this, I've temporarily hacked up a solution
that works, but is not ideal: since the receiveTuple DestFunction is
passed the portal name, we can use that to lookup the Portal data
structure for the cursor and then use that to get at the tuple store the
Portal is using. This unnecessarily ties the Portal code with the
tupleReceiver code, but it works...
The proper fix for this is probably to change the DestFunction API --
Tom suggested passing the full QueryDesc to the receiveTuple function.
In that case, callers of ExecutorRun could "subclass" QueryDesc to add
any additional fields that their particular CommandDest needed to get
access to. This approach would work, but I'd like to think about it for
a little bit longer before deciding which route to go. In the mean time,
the code works fine, so I don't think a fix is urgent.
- (semi-related) I added a NO SCROLL keyword to DECLARE CURSOR, and
adjusted the behavior of SCROLL in accordance with the discussion on
-hackers.
- (unrelated) Cleaned up some SGML markup in sql.sgml, copy.sgml
Neil Conway
entire contents of the subplan into the tuplestore before we can return
any tuples. Instead, the tuplestore holds what we've already read, and
we fetch additional rows from the subplan as needed. Random access to
the previously-read rows works with the tuplestore, and doesn't affect
the state of the partially-read subplan. This is a step towards fixing
the problems with cursors over complex queries --- we don't want to
stick in Materialize nodes if they'll prevent quick startup for a cursor.
just the significant fields of FunctionCallInfoData, rather than MemSet'ing
the whole struct to zero. Unused positions in the arg[] array will
thereby contain garbage rather than zeroes. This buys back some of the
performance hit from increasing FUNC_MAX_ARGS. Also tweak tuplesort.c
code for more speed by marking some routines 'inline'. All together
these changes speed up simple sorts, like count(distinct int4column),
by about 25% on a P4 running RH Linux 7.2.
value '-2' is used to indicate a variable-width type whose width is
computed as strlen(datum)+1. Everything that looks at typlen is updated
except for array support, which Joe Conway is working on; at the moment
it wouldn't work to try to create an array of cstring.
to make a reasonable attempt at accounting for palloc overhead, not just
the requested size of each memory chunk. Since in many scenarios this
will make for a significant reduction in the amount of space acquired,
partially compensate by doubling the default value of SORT_MEM to 1Mb.
Per discussion in pgsql-general around 9-Jun-2002..
yesterday's proposal to pghackers. Also remove unnecessary parameters
to heap_beginscan, heap_rescan. I modified pg_proc.h to reflect the
new numbers of parameters for the AM interface routines, but did not
force an initdb because nothing actually looks at those fields.
