Previously, the documentation described the streaming option as a boolean,
which is outdated since it's no longer a boolean as of protocol version 4.
This could confuse users.
This commit updates the description to remove the "boolean" reference and
clearly list the valid values for the streaming option.
Back-patch to v16, where the streaming option changed to a non-boolean.
Author: Euler Taveira <euler@eulerto.com>
Reviewed-by: Fujii Masao <masao.fujii@gmail.com>
Discussion: https://postgr.es/m/8d21fb98-5c25-4dee-8387-e5a62b01ea7d@app.fastmail.com
Backpatch-through: 16
The last_vacuum and vacuum_count fields in pg_stat_all_tables already
state that they do not include VACUUM FULL. However, total_vacuum_time,
which also excludes VACUUM FULL, did not mention this. This could
mislead users into thinking VACUUM FULL time is included.
To address this, this commit updates the documentation for
pg_stat_all_tables to explicitly state that total_vacuum_time does not
count VACUUM FULL.
Back-patched to v18, where total_vacuum_time was introduced.
Additionally, this commit clarifies that n_ins_since_vacuum also
excludes VACUUM FULL. Although n_ins_since_vacuum was added in v13,
we are not back-patching this change to stable branches, as it is
a documentation improvement, not a bug fix.
Author: Fujii Masao <masao.fujii@gmail.com>
Reviewed-by: Robert Treat <rob@xzilla.net>
Reviewed-by: David G. Johnston <david.g.johnston@gmail.com>
Reviewed-by: Laurenz Albe <laurenz.albe@cybertec.at>
Discussion: https://postgr.es/m/2ac375d1-591b-4f1b-a2af-f24335567866@oss.nttdata.com
Backpatch-through: 18
The grammar was a little shaky and confusing here, so word-smith it
a bit. Also, adjust the comments in pg_ident.conf.sample to use the
same terminology as the SGML docs, in particular "DATABASE-USERNAME"
not "PG-USERNAME".
Back-patch appropriate subsets. I did not risk changing
pg_ident.conf.sample in released branches, but it still seems OK
to change it in v18.
Reported-by: Alexey Shishkin <alexey.shishkin@enterprisedb.com>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: David G. Johnston <david.g.johnston@gmail.com>
Discussion: https://postgr.es/m/175206279327.3157504.12519088928605422253@wrigleys.postgresql.org
Backpatch-through: 13
Previously, the idle_replication_slot_timeout parameter used minutes
as its unit, based on the assumption that values would typically exceed
one minute in production environments. However, this caused unexpected
behavior: specifying a value below 30 seconds would round down to 0,
effectively disabling the timeout. This could be surprising to users.
To allow finer-grained control and avoid such confusion, this commit changes
the unit of idle_replication_slot_timeout to seconds. Larger values can
still be specified easily using standard time suffixes, for example,
'24h' for 24 hours.
Back-patch to v18 where idle_replication_slot_timeout was added.
Reported-by: Gunnar Morling <gunnar.morling@googlemail.com>
Author: Fujii Masao <masao.fujii@gmail.com>
Reviewed-by: Laurenz Albe <laurenz.albe@cybertec.at>
Reviewed-by: David G. Johnston <david.g.johnston@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Reviewed-by: Hayato Kuroda <kuroda.hayato@fujitsu.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CADGJaX_0+FTguWpNSpgVWYQP_7MhoO0D8=cp4XozSQgaZ40Odw@mail.gmail.com
Backpatch-through: 18
This routine has been introduced as a shortcut to be able to retrieve a
service name from an active connection, for psql. Per discussion, and
as it is only used by psql, let's remove it to not clutter the libpq API
more than necessary.
The logic in psql is replaced by lookups of PQconninfoOption for the
active connection, instead, updated each time the variables are synced
by psql, the prompt shortcut relying on the variable synced.
Reported-by: Noah Misch <noah@leadboat.com>
Discussion: https://postgr.es/m/20250706161319.c1.nmisch@google.com
Backpatch-through: 18
The documentation for pg_replication_slots previously mentioned only
max_slot_wal_keep_size as a condition under which the wal_status column
could show unreserved or lost. However, since commit be87200,
replication slots can also be invalidated due to horizon or wal_level,
and since commit ac0e33136a, idle_replication_slot_timeout can also
trigger this state.
This commit updates the description of the wal_status column to
reflect that max_slot_wal_keep_size is not the only cause of the lost state.
Back-patched to v16, where the additional invalidation cases were introduced.
Author: Fujii Masao <masao.fujii@gmail.com>
Reviewed-by: Hayato Kuroda <kuroda.hayato@fujitsu.com>
Reviewed-by: Nisha Moond <nisha.moond412@gmail.com>
Discussion: https://postgr.es/m/78b34e84-2195-4f28-a151-5d204a382fdd@oss.nttdata.com
Backpatch-through: 16
The documentation previously stated that the wal_status column is NULL
if restart_lsn is NULL in the pg_replication_slots view. This is incorrect,
and wal_status can be "lost" even when restart_lsn is NULL.
This commit removes the incorrect description.
Back-patched to all supported versions.
Author: Fujii Masao <masao.fujii@gmail.com>
Reviewed-by: Nisha Moond <nisha.moond412@gmail.com>
Discussion: https://postgr.es/m/c9d23cdc-b5dd-455a-8ee9-f1f24d701d89@oss.nttdata.com
Backpatch-through: 13
Commit 1546e17f9d accidentally misspelled additionally as
additionaly. Backpatch to v17 to match where the original
commit was backpatched.
Author: Daniel Gustafsson <daniel@yesql.se>
Backpatch-through: 17
This commit renames the pg_recvlogical options --two-phase and
--failover to --enable-two-phase and --enable-failover, respectively.
The new names distinguish these enabling options from action options
like --start and --create-slot, while clearly indicating their purpose
to enable specific logical slot features.
The option --failover is new in PostgreSQL 18 (commit cf2655a902), so
no compatibility break there. The option --two-phase has existed
since PostgreSQL 15 (commit cda03cfed6), so for compatibility we keep
the old option name --two-phase around as deprecated.
Also note that pg_createsubscriber has acquired an --enable-two-phase
option, so this increases consistency across tools.
Co-authored-by: Masahiko Sawada <sawada.mshk@gmail.com>
Discussion: https://postgr.es/m/a28f66df-1354-4709-8d63-932ded4cac35@eisentraut.org
Just like selecting from a view is exploitable (CVE-2024-7348),
selecting from a table with virtual generated columns is exploitable.
Users who are concerned about this can avoid selecting from views, but
telling them to avoid selecting from tables is less practical.
To address this, this changes it so that generation expressions for
virtual generated columns are restricted to using built-in functions
and types, and the columns are restricted to having a built-in type.
We assume that built-in functions and types cannot be exploited for
this purpose.
In the future, this could be expanded by some new mechanism to declare
other functions and types as safe or trusted for this purpose, but
that is to be designed.
(An alternative approach might have been to expand the
restrict_nonsystem_relation_kind GUC to handle this, like the fix for
CVE-2024-7348. But that is kind of an ugly approach. That fix had to
fit in the constraints of fixing an ancient vulnerability in all
branches. Since virtual generated columns are new, we're free from
the constraints of the past, and we can and should use cleaner
options.)
Reported-by: Feike Steenbergen <feikesteenbergen@gmail.com>
Reviewed-by: jian he <jian.universality@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/CAK_s-G2Q7de8Q0qOYUR%3D_CTB5FzzVBm5iZjOp%2BmeVWpMpmfO0w%40mail.gmail.com
Protocol v4 introduces parallel streaming, which allows Stream Abort
messages to include additional abort information such as LSN and
timestamp. However, the current documentation only states, "This field is
available since protocol version 4," which may misleadingly suggest that
the fields are always present when using protocol v4.
This patch clarifies that the abort LSN and timestamp are included only
when parallel streaming is enabled, even under protocol v4.
Author: Anthonin Bonnefoy <anthonin.bonnefoy@datadoghq.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Backpatch-through: 16, where it was introduced
Discussion: https://postgr.es/m/CAO6_XqoKteQR1AnaR8iPcegbBE+HkAc2-g12rxN04yOt4-2ORg@mail.gmail.com
The documentation previously described the type of the io_workers GUC
parameter as "int". However, the documentation consistently uses "integer"
for parameters of this type.
This commit updates the type description of io_workers to "integer"
for consistency with other GUC parameter descriptions.
Author: Fujii Masao <masao.fujii@gmail.com>
Discussion: https://postgr.es/m/e95c899a-2aeb-45b7-8fd3-7a27dcdb475b@oss.nttdata.com
The documentation for track_cost_delay_timing describes where cost-based
vacuum delay timing information is displayed when the setting is enabled.
While this information is also shown in the output of ANALYZE VERBOSE,
that was previously omitted from the list.
This commit updates the documentation to include ANALYZE VERBOSE in the list,
clarifying that it also reports cost-based delay timing information.
Author: Fujii Masao <masao.fujii@gmail.com>
Discussion: https://postgr.es/m/e95c899a-2aeb-45b7-8fd3-7a27dcdb475b@oss.nttdata.com
For parameters that exist as both configuration and storage options,
the documentation typically includes secondary index entries to
help users distinguish and locate the relevant references easily.
However, such index entries were missing for vacuum_truncate and
vacuum_max_eager_freeze_failure_rate, both introduced in v18.
This commit adds appropriate secondary index terms for these parameters
to ensure consistency with other parameters and improve usability of
the documentation index.
Author: Fujii Masao <masao.fujii@gmail.com>
Discussion: https://postgr.es/m/e95c899a-2aeb-45b7-8fd3-7a27dcdb475b@oss.nttdata.com
Previously, the UUID functions documentation defined the "UUID" index entry
to link to the UUID data type page, even though that entry already exists there.
Instead, the UUID functions page should define its own index entry linking
to itself.
This commit updates the UUID index entry in the UUID functions documentation
to point to the correct section, improving navigation and avoiding duplication.
Back-patch to all supported versions.
Author: Fujii Masao <masao.fujii@gmail.com>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Discussion: https://postgr.es/m/f33e0493-5773-4296-87c5-7ce459054cfe@oss.nttdata.com
Backpatch-through: 13
\close has been introduced in d55322b0da to be able to close a
prepared statement using the extended protocol in psql. Per discussion,
the name "close" is ambiguous. At the SQL level, CLOSE is used to close
a cursor. At protocol level, the close message can be used to either
close a statement or a portal.
This patch renames \close to \close_prepared to avoid any ambiguity and
make it clear that this is used to close a prepared statement. This new
name has been chosen based on the feedback from the author and the
reviewers.
Author: Anthonin Bonnefoy <anthonin.bonnefoy@datadoghq.com>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Reviewed-by: Jelte Fennema-Nio <postgres@jeltef.nl>
Discussion: https://postgr.es/m/3e694442-0df5-4f92-a08f-c5d4c4346b85@eisentraut.org
Specify whether the bucket bounds are inclusive or exclusive,
and improve some other vague language. Explain the behavior that
occurs when the "low" bound is greater than the "high" bound.
Make width_bucket_numeric's comment more like that for
width_bucket_float8, in particular noting that infinite
bounds are rejected (since they became possible in v14).
Reported-by: Ben Peachey Higdon <bpeacheyhigdon@gmail.com>
Author: Robert Treat <rob@xzilla.net>
Co-authored-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Dean Rasheed <dean.a.rasheed@gmail.com>
Discussion: https://postgr.es/m/2BD74F86-5B89-4AC1-8F13-23CED3546AC1@gmail.com
Backpatch-through: 13
In version 17 we added support for cross-partition EXCLUDE
constraints, as long as they included all partition key columns and
compared them with equality (see 8c852ba9a4). I updated the docs for
exclusion constraints, but I missed that the docs for CREATE TABLE
still said that they were not supported. This commit fixes that.
Author: Paul A. Jungwirth <pj@illuminatedcomputing.com>
Co-authored-by: Jeff Davis <pgsql@j-davis.com>
Discussion: https://postgr.es/m/c955d292-b92d-42d1-a2a0-1ec6715a2546@illuminatedcomputing.com
Backpatch-through: 17
Increase consistency of --help and man page synopses between pg_dump
and pg_dumpall. These should now be very similar, as pg_dumpall can
now also produce non-text dump output. But actually, they had drifted
further apart.
- Use verb "export" consistently, instead of "dump" or "extract".
- Use "SQL script" instead of just "script" or "text file".
- Maintain consistent distinction between SQL script and other
formats/archives (which is relevant for pg_restore).
Reviewed-by: Robert Treat <rob@xzilla.net>
Discussion: https://www.postgresql.org/message-id/flat/3f71d8a7-095b-4829-9b0b-fce09e9866b3%40eisentraut.org
Improve the clarity of LOG messages when a failover logical slot
synchronization fails, making the reasons more explicit for easier
debugging.
Update the documentation to outline scenarios where slot synchronization
can fail, especially during the initial sync, and emphasize that
pg_sync_replication_slot() is primarily intended for testing and
debugging purposes.
We also discussed improving the functionality of
pg_sync_replication_slot() so that it can be used reliably, but we would
take up that work for next version after some more discussion and review.
Reported-by: Suraj Kharage <suraj.kharage@enterprisedb.com>
Author: shveta malik <shveta.malik@gmail.com>
Reviewed-by: Zhijie Hou <houzj.fnst@fujitsu.com>
Reviewed-by: Peter Smith <smithpb2250@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Backpatch-through: 17, where it was introduced
Discussion: https://postgr.es/m/CAF1DzPWTcg+m+x+oVVB=y4q9=PYYsL_mujVp7uJr-_oUtWNGbA@mail.gmail.com
Commit 8492feb98f added support for parallel CREATE INDEX on GIN indexes.
However, previously two places in the documentation and two in the source
code comments still stated that only B-tree and BRIN indexes support
parallel builds.
This commit updates those references to correctly include GIN indexes.
Author: Fujii Masao <masao.fujii@gmail.com>
Reviewed-by: Robert Treat <rob@xzilla.net>
Discussion: https://postgr.es/m/7d27d068-90e2-4022-9bd7-09b0fd3d4f47@oss.nttdata.com
Commit 302cf15759 added support for LIKE in CREATE FOREIGN TABLE.
In this feature, since indexes are not created for foreign tables,
comments on indexes are not copied either.
However, the documentation incorrectly stated that index comments
would be copied when using INCLUDING COMMENTS. This commit
corrects that by removing the mention of index comments.
Author: Fujii Masao <masao.fujii@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/f86cd84f-a6a3-4451-bae7-5cca9e63b06d@oss.nttdata.com
I thought underscores wouldn't even work in "id"s, so I never checked to
see if anything referenced it, but it seems it does work, so adjust the
calling site for the dash syntax.
Commit 285613c60a introduced the min_protocol_version and
max_protocol_version connection options for libpq, but their descriptions
were placed in the middle of the unrelated ssl_min_protocol_version and
ssl_max_protocol_version entries.
This commit moves the min_protocol_version and max_protocol_version
descriptions to appear after the SSL-related options. This improves
the logical order and makes it easier for users to locate the relevant
settings in the libpq documentation.
Author: Fujii Masao <masao.fujii@gmail.com>
Reviewed-by: Jelte Fennema-Nio <postgres@jeltef.nl>
Discussion: https://postgr.es/m/a3391f36-30f5-4d4a-825b-232476819de8@oss.nttdata.com
