An inplace update's invalidation messages are part of its transaction's
commit record. However, the update survives even if its transaction
aborts or we stop recovery before replaying its transaction commit.
After recovery, a backend that started in recovery could update the row
without incorporating the inplace update. That could result in a table
with an index, yet relhasindex=f. That is a source of index corruption.
This bulk invalidation avoids the functional consequences. A future
change can fix the !RecoveryInProgress() scenario without changing the
WAL format. Back-patch to v17 - v12 (all supported versions). v18 will
instead add invalidations to WAL.
Discussion: https://postgr.es/m/20240618152349.7f.nmisch@google.com
We did not recover the subtransaction IDs of prepared transactions
when starting a hot standby from a shutdown checkpoint. As a result,
such subtransactions were considered as aborted, rather than
in-progress. That would lead to hint bits being set incorrectly, and
the subtransactions suddenly becoming visible to old snapshots when
the prepared transaction was committed.
To fix, update pg_subtrans with prepared transactions's subxids when
starting hot standby from a shutdown checkpoint. The snapshots taken
from that state need to be marked as "suboverflowed", so that we also
check the pg_subtrans.
Backport to all supported versions.
Discussion: https://www.postgresql.org/message-id/6b852e98-2d49-4ca1-9e95-db419a2696e0@iki.fi
1. TruncateMultiXact() performs the SLRU truncations in a critical
section. Deleting the SLRU segments calls ForwardSyncRequest(), which
will try to compact the request queue if it's full
(CompactCheckpointerRequestQueue()). That in turn allocates memory,
which is not allowed in a critical section. Backtrace:
TRAP: failed Assert("CritSectionCount == 0 || (context)->allowInCritSection"), File: "../src/backend/utils/mmgr/mcxt.c", Line: 1353, PID: 920981
postgres: autovacuum worker template0(ExceptionalCondition+0x6e)[0x560a501e866e]
postgres: autovacuum worker template0(+0x5dce3d)[0x560a50217e3d]
postgres: autovacuum worker template0(ForwardSyncRequest+0x8e)[0x560a4ffec95e]
postgres: autovacuum worker template0(RegisterSyncRequest+0x2b)[0x560a50091eeb]
postgres: autovacuum worker template0(+0x187b0a)[0x560a4fdc2b0a]
postgres: autovacuum worker template0(SlruDeleteSegment+0x101)[0x560a4fdc2ab1]
postgres: autovacuum worker template0(TruncateMultiXact+0x2fb)[0x560a4fdbde1b]
postgres: autovacuum worker template0(vac_update_datfrozenxid+0x4b3)[0x560a4febd2f3]
postgres: autovacuum worker template0(+0x3adf66)[0x560a4ffe8f66]
postgres: autovacuum worker template0(AutoVacWorkerMain+0x3ed)[0x560a4ffe7c2d]
postgres: autovacuum worker template0(+0x3b1ead)[0x560a4ffecead]
postgres: autovacuum worker template0(+0x3b620e)[0x560a4fff120e]
postgres: autovacuum worker template0(+0x3b3fbb)[0x560a4ffeefbb]
postgres: autovacuum worker template0(+0x2f724e)[0x560a4ff3224e]
/lib/x86_64-linux-gnu/libc.so.6(+0x27c8a)[0x7f62cc642c8a]
/lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0x85)[0x7f62cc642d45]
postgres: autovacuum worker template0(_start+0x21)[0x560a4fd16f31]
To fix, bail out in CompactCheckpointerRequestQueue() without doing
anything, if it's called in a critical section. That covers the above
call path, as well as any other similar cases where
RegisterSyncRequest might be called in a critical section.
2. After fixing that, another problem became apparent: Autovacuum
process doing that truncation can deadlock with the checkpointer
process. TruncateMultiXact() sets "MyProc->delayChkptFlags |=
DELAY_CHKPT_START". If the sync request queue is full and cannot be
compacted, the process will repeatedly sleep and retry, until there is
room in the queue. However, if the checkpointer is trying to start a
checkpoint at the same time, and is waiting for the DELAY_CHKPT_START
processes to finish, the queue will never shrink.
More concretely, the autovacuum process is stuck here:
#0 0x00007fc934926dc3 in epoll_wait () from /lib/x86_64-linux-gnu/libc.so.6
#1 0x000056220b24348b in WaitEventSetWaitBlock (set=0x56220c2e4b50, occurred_events=0x7ffe7856d040, nevents=1, cur_timeout=<optimized out>) at ../src/backend/storage/ipc/latch.c:1570
#2 WaitEventSetWait (set=0x56220c2e4b50, timeout=timeout@entry=10, occurred_events=<optimized out>, occurred_events@entry=0x7ffe7856d040, nevents=nevents@entry=1,
wait_event_info=wait_event_info@entry=150994949) at ../src/backend/storage/ipc/latch.c:1516
#3 0x000056220b243224 in WaitLatch (latch=<optimized out>, latch@entry=0x0, wakeEvents=wakeEvents@entry=40, timeout=timeout@entry=10, wait_event_info=wait_event_info@entry=150994949)
at ../src/backend/storage/ipc/latch.c:538
#4 0x000056220b26cf46 in RegisterSyncRequest (ftag=ftag@entry=0x7ffe7856d0a0, type=type@entry=SYNC_FORGET_REQUEST, retryOnError=true) at ../src/backend/storage/sync/sync.c:614
#5 0x000056220af9db0a in SlruInternalDeleteSegment (ctl=ctl@entry=0x56220b7beb60 <MultiXactMemberCtlData>, segno=segno@entry=11350) at ../src/backend/access/transam/slru.c:1495
#6 0x000056220af9dab1 in SlruDeleteSegment (ctl=ctl@entry=0x56220b7beb60 <MultiXactMemberCtlData>, segno=segno@entry=11350) at ../src/backend/access/transam/slru.c:1566
#7 0x000056220af98e1b in PerformMembersTruncation (oldestOffset=<optimized out>, newOldestOffset=<optimized out>) at ../src/backend/access/transam/multixact.c:3006
#8 TruncateMultiXact (newOldestMulti=newOldestMulti@entry=3221225472, newOldestMultiDB=newOldestMultiDB@entry=4) at ../src/backend/access/transam/multixact.c:3201
#9 0x000056220b098303 in vac_truncate_clog (frozenXID=749, minMulti=<optimized out>, lastSaneFrozenXid=749, lastSaneMinMulti=3221225472) at ../src/backend/commands/vacuum.c:1917
#10 vac_update_datfrozenxid () at ../src/backend/commands/vacuum.c:1760
#11 0x000056220b1c3f76 in do_autovacuum () at ../src/backend/postmaster/autovacuum.c:2550
#12 0x000056220b1c2c3d in AutoVacWorkerMain (startup_data=<optimized out>, startup_data_len=<optimized out>) at ../src/backend/postmaster/autovacuum.c:1569
and the checkpointer is stuck here:
#0 0x00007fc9348ebf93 in clock_nanosleep () from /lib/x86_64-linux-gnu/libc.so.6
#1 0x00007fc9348fe353 in nanosleep () from /lib/x86_64-linux-gnu/libc.so.6
#2 0x000056220b40ecb4 in pg_usleep (microsec=microsec@entry=10000) at ../src/port/pgsleep.c:50
#3 0x000056220afb43c3 in CreateCheckPoint (flags=flags@entry=108) at ../src/backend/access/transam/xlog.c:7098
#4 0x000056220b1c6e86 in CheckpointerMain (startup_data=<optimized out>, startup_data_len=<optimized out>) at ../src/backend/postmaster/checkpointer.c:464
To fix, add AbsorbSyncRequests() to the loops where the checkpointer
waits for DELAY_CHKPT_START or DELAY_CHKPT_COMPLETE operations to
finish.
Backpatch to v14. Before that, SLRU deletion didn't call
RegisterSyncRequest, which avoided this failure. I'm not sure if there
are other similar scenarios on older versions, but we haven't had
any such reports.
Discussion: https://www.postgresql.org/message-id/ccc66933-31c1-4f6a-bf4b-45fef0d4f22e@iki.fi
This is a follow-up of f663b00, that has been committed to v13 and v14,
tweaking the TAP test for two-phase transactions so as it provides
coverage for the bug that has been fixed. This change is done in its
own commit for clarity, as v15 and HEAD did not show the problematic
behavior, still missed coverage for it.
While on it, this adds a comment about the dependency of the last
partial segment rename and RecoverPreparedTransactions() at the end of
recovery, as that can be easy to miss.
Author: Michael Paquier
Reviewed-by: Kyotaro Horiguchi
Discussion: https://postgr.es/m/743b9b45a2d4013bd90b6a5cba8d6faeb717ee34.camel@cybertec.at
Backpatch-through: 13
The call to XLogGetReplicationSlotMinimumLSN() might return a
greater LSN than the one given to the function. Subsequent segment
number calculations might then underflow, which could result in
unexpected behavior when removing or recyling WAL files. This was
introduced with max_slot_wal_keep_size in c655077639. To fix, skip
the block of code for replication slots if the LSN is greater.
Reported-by: Xu Xingwang
Author: Kyotaro Horiguchi
Reviewed-by: Junwang Zhao
Discussion: https://postgr.es/m/17903-4288d439dee856c6%40postgresql.org
Backpatch-through: 13
If the ps display is not cleared at this point, the process could
continue displaying "recovering NNN" even if handling end-of-recovery
steps. df9274a has tackled that by providing some information with the
end-of-recovery checkpoint but 7ff23c6 has nullified the effect of the
first commit.
Per a suggestion from Justin, just clear the ps display when we are done
with recovery, so as no incorrect information is displayed. This may
get extended in the future, but for now restore the pre-7ff23c6
behavior.
Author: Justin Prysby
Discussion: https://postgr.es/m/20220913223954.GU31833@telsasoft.com
Backpatch-through: 15
clang 15+ will issue a set-but-not-used warning when the only
use of a variable is in autoincrements (e.g., "foo++;").
That's perfectly sensible, but it detects a few more cases that
we'd not noticed before. Silence the warnings with our usual
methods, such as PG_USED_FOR_ASSERTS_ONLY, or in one case by
actually removing a useless variable.
One thing that we can't nicely get rid of is that with %pure-parser,
Bison emits "yynerrs" as a local variable that falls foul of this
warning. To silence those, I inserted "(void) yynerrs;" in the
top-level productions of affected grammars.
Per recently-established project policy, this is a candidate
for back-patching into out-of-support branches: it suppresses
annoying compiler warnings but changes no behavior. Hence,
back-patch to 9.5, which is as far as these patches go without
issues. (A preliminary check shows that the prior branches
need some other set-but-not-used cleanups too, so I'll leave
them for another day.)
Discussion: https://postgr.es/m/514615.1663615243@sss.pgh.pa.us
When a PostgreSQL instance performing archive recovery but not using
standby mode is promoted, and the last WAL segment that it attempted
to read ended in a partial record, the previous code would create
invalid WAL on the new timeline. The WAL from the previously timeline
would be copied to the new timeline up until the end of the last valid
record, but instead of beginning to write WAL at immediately
afterwards, the promoted server would write an overwrite contrecord at
the beginning of the next segment. The end of the previous segment
would be left as all-zeroes, resulting in failures if anything tried
to read WAL from that file.
The root of the issue is that ReadRecord() decides whether to set
abortedRecPtr and missingContrecPtr based on the value of StandbyMode,
but ReadRecord() switches to a new timeline based on the value of
ArchiveRecoveryRequested. We shouldn't try to write an overwrite
contrecord if we're switching to a new timeline, so change the test in
ReadRecod() to check ArchiveRecoveryRequested instead.
Code fix by Dilip Kumar. Comments by me incorporating suggested
language from Álvaro Herrera. Further review from Kyotaro Horiguchi
and Sami Imseih.
Discussion: http://postgr.es/m/CAFiTN-t7umki=PK8dT1tcPV=mOUe2vNhHML6b3T7W7qqvvajjg@mail.gmail.com
Discussion: http://postgr.es/m/FB0DEA0B-E14E-43A0-811F-C1AE93D00FF3%40amazon.com
Commit c6f2f016 added an explicit check for a Windows "junction point".
That turned out to be needed only because get_dirent_type() was busted
on Windows. It's been fixed by commit 9d3444dc, so remove it.
Add a TAP-test to demonstrate that in-place tablespaces are copied by
pg_basebackup. This exercises the codepath that would fail before
c6f2f016 on Windows, and shows that it still doesn't fail now that we're
using get_dirent_type() on both Windows and Unix.
Back-patch to 15, where in-place tablespaces arrived and caused this
problem (ie directories where previously only symlinks were expected).
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/CA%2BhUKGLzLK4PUPx0_AwXEWXOYAejU%3D7XpxnYE55Y%2Be7hB2N3FA%40mail.gmail.com
When a non-exclusive backup is canceled, do_pg_abort_backup() is called
and resets some variables set by pg_backup_start (pg_start_backup in v14
or before). But previously it forgot to reset the session state indicating
whether a non-exclusive backup is in progress or not in this session.
This issue could cause an assertion failure when the session running
BASE_BACKUP is terminated after it executed pg_backup_start and
pg_backup_stop (pg_stop_backup in v14 or before). Also it could cause
a segmentation fault when pg_backup_stop is called after BASE_BACKUP
in the same session is canceled.
This commit fixes the issue by making do_pg_abort_backup reset
that session state.
Back-patch to all supported branches.
Author: Fujii Masao
Reviewed-by: Kyotaro Horiguchi, Masahiko Sawada, Michael Paquier, Robert Haas
Discussion: https://postgr.es/m/3374718f-9fbf-a950-6d66-d973e027f44c@oss.nttdata.com
The original advice for hard-wired SetConfigOption calls was to use
PGC_S_OVERRIDE, particularly for PGC_INTERNAL GUCs. However,
that's really overkill for PGC_INTERNAL GUCs, since there is no
possibility that we need to override a user-provided setting.
Instead use PGC_S_DYNAMIC_DEFAULT in most places, so that the
value will appear with source = 'default' in pg_settings and thereby
not be shown by psql's new \dconfig command. The one exception is
that when changing in_hot_standby in a hot-standby session, we still
use PGC_S_OVERRIDE, because people felt that seeing that in \dconfig
would be a good thing.
Similarly use PGC_S_DYNAMIC_DEFAULT for the auto-tune value of
wal_buffers (if possible, that is if wal_buffers wasn't explicitly
set to -1), and for the typical 2MB value of max_stack_depth.
In combination these changes remove four not-very-interesting
entries from the typical output of \dconfig, all of which people
fingered as "why is that showing up?" in the discussion thread.
Discussion: https://postgr.es/m/3118455.1649267333@sss.pgh.pa.us
If a cluster is promoted (aka the control file shows a state different
than DB_IN_ARCHIVE_RECOVERY) while CreateRestartPoint() is still
processing, this function could miss an update of the control file for
"checkPoint" and "checkPointCopy" but still do the recycling and/or
removal of the past WAL segments, assuming that the to-be-updated LSN
values should be used as reference points for the cleanup. This causes
a follow-up restart attempting crash recovery to fail with a PANIC on a
missing checkpoint record if the end-of-recovery checkpoint triggered by
the promotion did not complete while the cluster abruptly stopped or
crashed before the completion of this checkpoint. The PANIC would be
caused by the redo LSN referred in the control file as located in a
segment already gone, recycled by the previous restartpoint with
"checkPoint" out-of-sync in the control file.
This commit fixes the update of the control file during restartpoints so
as "checkPoint" and "checkPointCopy" are updated even if the cluster has
been promoted while a restartpoint is running, to be on par with the set
of WAL segments actually recycled in the end of CreateRestartPoint().
This problem exists in all the stable branches. However, commit
7ff23c6, by removing the last call of CreateCheckPoint() from the
startup process, has made this bug much easier to reason about as
concurrent checkpoints are not possible anymore. No backpatch is done
yet, mostly out of caution from me as a point release is close by, but
we need to think harder about the case of concurrent checkpoints at
promotion if the bgwriter is not considered as running by the startup
process in ~v14, so this change is done only on HEAD for the moment.
Reported-by: Fujii Masao, Rui Zhao
Author: Kyotaro Horiguchi
Reviewed-by: Nathan Bossart, Michael Paquier
Discussion: https://postgr.es/m/20220316.102444.2193181487576617583.horikyota.ntt@gmail.com
This reverts commits 2c902bb and ccfbd92. Per buildfarm members
kestrel, rorqual and calliphoridae, the assertions checking that a TLI
history file should not exist when created by a WAL receiver have been
failing, and switching to durable_rename() over durable_rename_excl()
would cause the newest TLI history file to overwrite the existing one.
We need to think harder about such cases, so revert the new logic for
now.
Note that all the failures have been reported in the test
025_stuck_on_old_timeline.
Discussion: https://postgr.es/m/511362.1651116498@sss.pgh.pa.us
durable_rename_excl() attempts to avoid overwriting any existing files
by using link() and unlink(), falling back to rename() on some platforms
(e.g., Windows where link() followed by unlink() is not concurrent-safe,
see 909b449). Most callers of durable_rename_excl() use it just in case
there is an existing file, but it happens that for all of them we never
expect a target file to exist (WAL segment recycling, creation of
timeline history file and basic_archive).
basic_archive used durable_rename_excl() to avoid overwriting an archive
concurrently created by another server. Now, there is a stat() call to
avoid overwriting an existing archive a couple of lines above, so note
that this change opens a small TOCTOU window in this module between the
stat() call and durable_rename().
Furthermore, as mentioned in the top comment of durable_rename_excl(),
this routine can result in multiple hard links to the same file and data
corruption, with two or more links to the same file in pg_wal/ if a
crash happens before the unlink() call during WAL recycling.
Specifically, this would produce links to the same file for the current
WAL file and the next one because the half-recycled WAL file was
re-recycled during crash recovery of a follow-up cluster restart.
This change replaces all calls to durable_rename_excl() with
durable_rename(). This removes the protection against accidentally
overwriting an existing file, but some platforms are already living
without it, and all those code paths never expect an existing file (a
couple of assertions are added to check after that, in case).
This is a bug fix, but knowing the unlikeliness of the problem involving
one of more crashes at an exceptionally bad moment, no backpatch is
done. This could be revisited in the future.
Author: Nathan Bossart
Reviewed-by: Robert Haas, Kyotaro Horiguchi, Michael Paquier
Discussion: https://postgr.es/m/20220407182954.GA1231544@nathanxps13
Commit aa0105141 assigned fixed OIDs to template0 and postgres
in a very ad-hoc way. Notably, instead of teaching Catalog.pm
about these OIDs, the unused_oids script was just hacked to
not show them as unused. That's problematic since, for example,
duplicate_oids wouldn't report any future conflict. Hence,
invent a macro DECLARE_OID_DEFINING_MACRO() that can be used to
define an OID that is known to Catalog.pm and will participate
in duplicate-detection as well as renumbering by renumber_oids.pl.
(We don't anticipate renumbering these particular OIDs, but we
might as well build out all the Catalog.pm infrastructure while
we're here.)
Another issue is that aa0105141 neglected to touch IsPinnedObject,
with the result that it now claimed template0 and postgres are
pinned. The right thing to do there seems to be to teach it that
no database is pinned, since in fact DROP DATABASE doesn't check
for pinned-ness (and at least for these cases, that is an
intentional choice). It's not clear whether this wrong answer
had any visible effect, but perhaps it could have resulted in
erroneous management of dependency entries.
In passing, rename the TemplateDbOid macro to Template1DbOid
to reduce confusion (likely we should have done that way back
when we invented template0, but we didn't), and rename the
OID macros for template0 and postgres to have a similar style.
There are no changes to postgres.bki here, so no need for a
catversion bump.
Discussion: https://postgr.es/m/2935358.1650479692@sss.pgh.pa.us
As of commit 39969e2a1, no caller of do_pg_backup_start() passes NULL
for labelfile or tblspcmapfile, nor is it plausible that any would
do so in the future. Remove the code that coped with that case,
as (a) it's dead and (b) it causes Coverity to bleat about possibly
leaked storage.
While here, do some janitorial work on the function's header comment.
Before commit 412ad7a556, delayChkpt
was a Boolean. Now it's an integer. Extensions using it need to be
appropriately updated, so let's rename the field to make sure that
a hard compilation failure occurs.
Replacing delayChkpt with delayChkptFlags made a few comments extend
past 80 characters, so I reflowed them and changed some wording very
slightly.
The back-branches will need a different change to restore compatibility
with existing minor releases; this is just for master.
Per suggestion from Tom Lane.
Discussion: http://postgr.es/m/a7880f4d-1d74-582a-ada7-dad168d046d1@enterprisedb.com
Introduce a new GUC recovery_prefetch. When enabled, look ahead in the
WAL and try to initiate asynchronous reading of referenced data blocks
that are not yet cached in our buffer pool. For now, this is done with
posix_fadvise(), which has several caveats. Since not all OSes have
that system call, "try" is provided so that it can be enabled where
available. Better mechanisms for asynchronous I/O are possible in later
work.
Set to "try" for now for test coverage. Default setting to be finalized
before release.
The GUC wal_decode_buffer_size limits the distance we can look ahead in
bytes of decoded data.
The existing GUC maintenance_io_concurrency is used to limit the number
of concurrent I/Os allowed, based on pessimistic heuristics used to
infer that I/Os have begun and completed. We'll also not look more than
maintenance_io_concurrency * 4 block references ahead.
Reviewed-by: Julien Rouhaud <rjuju123@gmail.com>
Reviewed-by: Tomas Vondra <tomas.vondra@2ndquadrant.com>
Reviewed-by: Alvaro Herrera <alvherre@2ndquadrant.com> (earlier version)
Reviewed-by: Andres Freund <andres@anarazel.de> (earlier version)
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com> (earlier version)
Tested-by: Tomas Vondra <tomas.vondra@2ndquadrant.com> (earlier version)
Tested-by: Jakub Wartak <Jakub.Wartak@tomtom.com> (earlier version)
Tested-by: Dmitry Dolgov <9erthalion6@gmail.com> (earlier version)
Tested-by: Sait Talha Nisanci <Sait.Nisanci@microsoft.com> (earlier version)
Discussion: https://postgr.es/m/CA%2BhUKGJ4VJN8ttxScUFM8dOKX0BrBiboo5uz1cq%3DAovOddfHpA%40mail.gmail.com
Previously the statistics collector received statistics updates via UDP and
shared statistics data by writing them out to temporary files regularly. These
files can reach tens of megabytes and are written out up to twice a
second. This has repeatedly prevented us from adding additional useful
statistics.
Now statistics are stored in shared memory. Statistics for variable-numbered
objects are stored in a dshash hashtable (backed by dynamic shared
memory). Fixed-numbered stats are stored in plain shared memory.
The header for pgstat.c contains an overview of the architecture.
The stats collector is not needed anymore, remove it.
By utilizing the transactional statistics drop infrastructure introduced in a
prior commit statistics entries cannot "leak" anymore. Previously leaked
statistics were dropped by pgstat_vacuum_stat(), called from [auto-]vacuum. On
systems with many small relations pgstat_vacuum_stat() could be quite
expensive.
Now that replicas drop statistics entries for dropped objects, it is not
necessary anymore to reset stats when starting from a cleanly shut down
replica.
Subsequent commits will perform some further code cleanup, adapt docs and add
tests.
Bumps PGSTAT_FILE_FORMAT_ID.
Author: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Author: Andres Freund <andres@anarazel.de>
Author: Melanie Plageman <melanieplageman@gmail.com>
Reviewed-By: Andres Freund <andres@anarazel.de>
Reviewed-By: Thomas Munro <thomas.munro@gmail.com>
Reviewed-By: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-By: "David G. Johnston" <david.g.johnston@gmail.com>
Reviewed-By: Tomas Vondra <tomas.vondra@2ndquadrant.com> (in a much earlier version)
Reviewed-By: Arthur Zakirov <a.zakirov@postgrespro.ru> (in a much earlier version)
Reviewed-By: Antonin Houska <ah@cybertec.at> (in a much earlier version)
Discussion: https://postgr.es/m/20220303021600.hs34ghqcw6zcokdh@alap3.anarazel.de
Discussion: https://postgr.es/m/20220308205351.2xcn6k4x5yivcxyd@alap3.anarazel.de
Discussion: https://postgr.es/m/20210319235115.y3wz7hpnnrshdyv6@alap3.anarazel.de
Exclusive-mode backups have been deprecated since 9.6 (when
non-exclusive backups were introduced) due to the issues
they can cause should the system crash while one is running and
generally because non-exclusive provides a much better interface.
Further, exclusive backup mode wasn't really being tested (nor was most
of the related code- like being able to log in just to stop an exclusive
backup and the bits of the state machine related to that) and having to
possibly deal with an exclusive backup and the backup_label file
existing during pg_basebackup, pg_rewind, etc, added other complexities
that we are better off without.
This patch removes the exclusive backup mode, the various special cases
for dealing with it, and greatly simplifies the online backup code and
documentation.
Authors: David Steele, Nathan Bossart
Reviewed-by: Chapman Flack
Discussion: https://postgr.es/m/ac7339ca-3718-3c93-929f-99e725d1172c@pgmasters.nethttps://postgr.es/m/CAHg+QDfiM+WU61tF6=nPZocMZvHDzCK47Kneyb0ZRULYzV5sKQ@mail.gmail.com
If TRUNCATE causes some buffers to be invalidated and thus the
checkpoint does not flush them, TRUNCATE must also ensure that the
corresponding files are truncated on disk. Otherwise, a replay
from the checkpoint might find that the buffers exist but have
the wrong contents, which may cause replay to fail.
Report by Teja Mupparti. Patch by Kyotaro Horiguchi, per a design
suggestion from Heikki Linnakangas, with some changes to the
comments by me. Review of this and a prior patch that approached
the issue differently by Heikki Linnakangas, Andres Freund, Álvaro
Herrera, Masahiko Sawada, and Tom Lane.
Discussion: http://postgr.es/m/BYAPR06MB6373BF50B469CA393C614257ABF00@BYAPR06MB6373.namprd06.prod.outlook.com
Teach xlogreader.c to decode the WAL into a circular buffer. This will
support optimizations based on looking ahead, to follow in a later
commit.
* XLogReadRecord() works as before, decoding records one by one, and
allowing them to be examined via the traditional XLogRecGetXXX()
macros and certain traditional members like xlogreader->ReadRecPtr.
* An alternative new interface XLogReadAhead()/XLogNextRecord() is
added that returns pointers to DecodedXLogRecord objects so that it's
now possible to look ahead in the WAL stream while replaying.
* In order to be able to use the new interface effectively while
streaming data, support is added for the page_read() callback to
respond to a new nonblocking mode with XLREAD_WOULDBLOCK instead of
waiting for more data to arrive.
No direct user of the new interface is included in this commit, though
XLogReadRecord() uses it internally. Existing code doesn't need to
change, except in a few places where it was accessing reader internals
directly and now needs to go through accessor macros.
Reviewed-by: Julien Rouhaud <rjuju123@gmail.com>
Reviewed-by: Tomas Vondra <tomas.vondra@enterprisedb.com>
Reviewed-by: Andres Freund <andres@anarazel.de> (earlier versions)
Discussion: https://postgr.es/m/CA+hUKGJ4VJN8ttxScUFM8dOKX0BrBiboo5uz1cq=AovOddfHpA@mail.gmail.com
Commands like ALTER TABLE SET TABLESPACE may leave files for the next
checkpoint to clean up. If such files are not removed by the time DROP
TABLESPACE is called, we request a checkpoint so that they are deleted.
However, there is presently a window before checkpoint start where new
unlink requests won't be scheduled until the following checkpoint. This
means that the checkpoint forced by DROP TABLESPACE might not remove the
files we expect it to remove, and the following ERROR will be emitted:
ERROR: tablespace "mytblspc" is not empty
To fix, add a call to AbsorbSyncRequests() just before advancing the
unlink cycle counter. This ensures that any unlink requests forwarded
prior to checkpoint start (i.e., when ckpt_started is incremented) will
be processed by the current checkpoint. Since AbsorbSyncRequests()
performs memory allocations, it cannot be called within a critical
section, so we also need to move SyncPreCheckpoint() to before
CreateCheckPoint()'s critical section.
This is an old bug, so back-patch to all supported versions.
Author: Nathan Bossart <nathandbossart@gmail.com>
Reported-by: Nathan Bossart <nathandbossart@gmail.com>
Reviewed-by: Thomas Munro <thomas.munro@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20220215235845.GA2665318%40nathanxps13
FinishWalRecovery() copied the valid part of the last WAL block into a
palloc'd buffer, and the code in StartupXLOG() copied it to the WAL
buffer. But the memcpy in StartupXLOG() copied a full 8kB block, not
just the valid part, i.e. it copied from beyond the end of the buffer.
The invalid part was cleared immediately afterwards, so as long as the
memory was allocated and didn't segfault, it didn't do any harm, but
it can definitely segfault.
Discussion: https://www.postgresql.org/message-id/efc12e32-5af2-3485-5b1d-5af9f707491a@iki.fi
This moves the functions related to performing WAL recovery into the new
xlogrecovery.c source file, leaving xlog.c responsible for maintaining
the WAL buffers, coordinating the startup and switch from recovery to
normal operations, and other miscellaneous stuff that have always been in
xlog.c.
Reviewed-by: Andres Freund, Kyotaro Horiguchi, Robert Haas
Discussion: https://www.postgresql.org/message-id/a31f27b4-a31d-f976-6217-2b03be646ffa%40iki.fi
This is in preparation for the next commit, which will split off
recovery-related code from xlog.c into a new source file. This is the
order that things will happen with the next commit, and the point of
this commit is to make these ordering changes more explicit, while the
next commit mechanically moves the source code to the new file. To aid
review, I added "BEGIN/END function" comments to mark which blocks of
code are moved to which functions in the next commit. They will be gone
in the next commit.
Reviewed-by: Andres Freund, Kyotaro Horiguchi, Robert Haas
Discussion: https://www.postgresql.org/message-id/a31f27b4-a31d-f976-6217-2b03be646ffa%40iki.fi
To tidy up after some recent refactorings in xlog.c. These would be
fixed by the pgindent run we do at the end of the development cycle,
but I want to clean these up now as I'm about to do some more big
refactorings on xlog.c.
Running a shell command for each file to be archived has a lot of
overhead and may not offer as much error checking as you want, or the
exact semantics that you want. So, offer the option to call a loadable
module for each file to be archived, rather than running a shell command.
Also, add a 'basic_archive' contrib module as an example implementation
that archives to a local directory.
Nathan Bossart, with a little bit of kibitzing by me.
Discussion: http://postgr.es/m/20220202224433.GA1036711@nathanxps13
WAL replay would cause a hard crash if the timeline expected by a
XLOG_END_OF_RECOVERY, a XLOG_CHECKPOINT_ONLINE, or a
XLOG_CHECKPOINT_SHUTDOWN record is not the same as the timeline being
replayed, using the same error message for all three of them. This
commit changes those error messages to use different wordings, adapted
to each record type, which is useful when it comes to the debugging of
an issue in this area.
Author: Amul Sul
Reviewed-by: Nathan Bossart, Robert Haas
Discussion: https://postgr.es/m/CAAJ_b97i1ZerYC_xW6o_AiDSW5n+sGi8k91Yc8KS8bKWKxjqwQ@mail.gmail.com
This fixes a set of issues that have accumulated over the past months
(or years) in various code areas. Most fixes are related to some recent
additions, as of the development of v15.
Author: Justin Pryzby
Discussion: https://postgr.es/m/20220124030001.GQ23027@telsasoft.com
It's not great that RecoveryInProgress() calls InitXLOGAccess(),
because a status inquiry function typically shouldn't have the side
effect of performing initializations. We could fix that by calling
InitXLOGAccess() from some other place, but instead, let's remove it
altogether.
One thing InitXLogAccess() did is initialize wal_segment_size, but it
doesn't need to do that. In the postmaster, PostmasterMain() calls
LocalProcessControlFile(), and all child processes will inherit that
value -- except in EXEC_BACKEND bulds, but then each backend runs
SubPostmasterMain() which also calls LocalProcessControlFile().
The other thing InitXLOGAccess() did is update RedoRecPtr and
doPageWrites, but that's not critical, because all code that uses
them will just retry if it turns out that they've changed. The
only difference is that most code will now see an initial value that
is definitely invalid instead of one that might have just been way
out of date, but that will only happen once per backend lifetime,
so it shouldn't be a big deal.
Patch by me, reviewed by Nathan Bossart, Michael Paquier, Andres
Freund, Heikki Linnakangas, and Álvaro Herrera.
Discussion: http://postgr.es/m/CA+TgmoY7b65qRjzHN_tWUk8B4sJqk1vj1d31uepVzmgPnZKeLg@mail.gmail.com
The idea here is that when a performance problem is known to have
occurred at a certain point in time, it's a good thing if there is
some information available from the logs to help figure out what
might have happened around that time.
This change attracted an above-average amount of dissent, because
it means that a server with default settings will produce some amount
of log output even if nothing has gone wrong. However, by my count,
the mailing list discussion had about twice as many people in favor
of the change as opposed. The reasons for believing that the extra
log output is not an issue in practice are: (1) the rate at which
messages can be generated by this setting is bounded to one every
few minutes on a properly-configured system and (2) production
systems tend to have a lot more junk in the log from that due to
failed connection attempts, ERROR messages generated by application
activity, and the like.
Bharath Rupireddy, reviewed by Fujii Masao and by me. Many other
people commented on the thread, but as far as I can see that was
discussion of the merits of the change rather than review of the
patch.
Discussion: https://postgr.es/m/CALj2ACX-rW_OeDcp4gqrFUAkf1f50Fnh138dmkd0JkvCNQRKGA@mail.gmail.com
This commit moves the timestamp computation of the control file within
the routine of src/common/ in charge of updating the backend's control
file, which is shared by multiple frontend tools (pg_rewind,
pg_checksums and pg_resetwal) and the backend itself.
This change has as direct effect to update the control file's timestamp
when writing the control file in pg_rewind and pg_checksums, something
that is helpful to keep track of control file updates for those
operations, something also tracked by the backend at startup within its
logs. This part is arguably a bug, as ControlFileData->time should be
updated each time a new version of the control file is written, but this
is a behavior change so no backpatch is done.
Author: Amul Sul
Reviewed-by: Nathan Bossart, Michael Paquier, Bharath Rupireddy
Discussion: https://postgr.es/m/CAAJ_b97nd_ghRpyFV9Djf9RLXkoTbOUqnocq11WGq9TisX09Fw@mail.gmail.com
In most places, the variables necessarily store the same value as the
eponymous members of the XLogReaderState that we use during WAL
replay, because ReadRecord() assigns the values from the structure
members to the global variables just after XLogReadRecord() returns.
However, XLogBeginRead() adjusts the structure members but not the
global variables, so after XLogBeginRead() and before the completion
of XLogReadRecord() the values can differ. Otherwise, they must be
identical. According to my analysis, the only place where either
variable is referenced at a point where it might not have the same
value as the structure member is the refrence to EndRecPtr within
XLogPageRead.
Therefore, at every other place where we are using the global
variable, we can just switch to using the structure member instead,
and remove the global variable. However, we can, and in fact should,
do this in XLogPageRead() as well, because at that point in the code,
the global variable will actually store the start of the record we
want to read - either because it's where the last WAL record ended, or
because the read position has been changed using XLogBeginRead since
the last record was read. The structure member, on the other hand,
will already have been updated to point to the end of the record we
just read. Elsewhere, the latter is what we use as an argument to
emode_for_corrupt_record(), so we should do the same here.
This part of the patch is perhaps a bug fix, but I don't think it has
any important consequences, so no back-patch. The point here is just
to continue to whittle down the entirely excessive use of global
variables in xlog.c.
Discussion: http://postgr.es/m/CA+Tgmoao96EuNeSPd+hspRKcsCddu=b1h-QNRuKfY8VmfNQdfg@mail.gmail.com
rescanLatestTimeLine() contains a guard against switching to
a timeline that forked off from the current one prior to the
current recovery point, but that guard does not work if the
timeline switch occurs before the first WAL recod (which must
be the checkpoint record) is read. Without this patch, an
improper timeline switch is therefore possible in such cases.
This happens because rescanLatestTimeLine() relies on the global
variable EndRecPtr to understand the current position of WAL
replay. However, EndRecPtr at this point in the code contains
the endpoint of the last-replayed record, not the startpoint or
endpoint of the record being replayed now. Thus, before any
records have been replayed, it's zero, which causes the sanity
check to always pass.
To fix, pass down the correct timeline explicitly. The
EndRecPtr value we want is the one from the xlogreader, which
will be the starting position of the record we're about to
try to read, rather than the global variable, which is the
ending position of the last record we successfully read.
They're usually the same, but not in the corner case described
here.
No back-patch, because in v14 and earlier branhes, we were using
the wrong TLI here as well as the wrong LSN. In master, that was
fixed by commit 4a92a1c3d1, but
that and it's prerequisite patches are too invasive to
back-patch for such a minor issue.
Patch by me, reviewed by Amul Sul.
Discussion: http://postgr.es/m/CA+Tgmoao96EuNeSPd+hspRKcsCddu=b1h-QNRuKfY8VmfNQdfg@mail.gmail.com
