When using a pipeline, a transaction starts from the first command and
is committed with a Sync message or when the pipeline ends.
Functions like IsInTransactionBlock() or PreventInTransactionBlock()
were already able to understand a pipeline as being in a transaction
block, but it was not the case of CheckTransactionBlock(). This
function is called for example to generate a WARNING for SET LOCAL,
complaining that it is used outside of a transaction block.
The current state of the code caused multiple problems, like:
- SET LOCAL executed at any stage of a pipeline issued a WARNING, even
if the command was at least second in line where the pipeline is in a
transaction state.
- LOCK TABLE failed when invoked at any step of a pipeline, even if it
should be able to work within a transaction block.
The pipeline protocol assumes that the first command of a pipeline is
not part of a transaction block, and that any follow-up commands is
considered as within a transaction block.
This commit changes the backend so as an implicit transaction block is
started each time the first Execute message of a pipeline has finished
processing, with this implicit transaction block ended once a sync is
processed. The checks based on XACT_FLAGS_PIPELINING in the routines
checking if we are in a transaction block are not necessary: it is
enough to rely on the existing ones.
Some tests are added to pgbench, that can be backpatched down to v17
when \syncpipeline is involved and down to v14 where \startpipeline and
\endpipeline are available. This is unfortunately limited regarding the
error patterns that can be checked, but it provides coverage for various
pipeline combinations to check if these succeed or fail. These tests
are able to capture the case of SET LOCAL's WARNING. The author has
proposed a different feature to improve the coverage by adding similar
meta-commands to psql where error messages could be checked, something
more useful for the cases where commands cannot be used in transaction
blocks, like REINDEX CONCURRENTLY or VACUUM. This is considered as
future work for v18~.
Author: Anthonin Bonnefoy
Reviewed-by: Jelte Fennema-Nio, Michael Paquier
Discussion: https://postgr.es/m/CAO6_XqrWO8uNBQrSu5r6jh+vTGi5Oiyk4y8yXDORdE2jbzw8xw@mail.gmail.com
Backpatch-through: 13
This commit adds query ID reports for two code paths when processing
extended query protocol messages:
- When receiving a bind message, setting it to the first Query retrieved
from a cached cache.
- When receiving an execute message, setting it to the first PlannedStmt
stored in a portal.
An advantage of this method is that this is able to cover all the types
of portals handled in the extended query protocol, particularly these
two when the report done in ExecutorStart() is not enough (neither is an
addition in ExecutorRun(), actually, for the second point):
- Multiple execute messages, with multiple ExecutorRun().
- Portal with execute/fetch messages, like a query with a RETURNING
clause and a fetch size that stores the tuples in a first execute
message going though ExecutorStart() and ExecuteRun(), followed by one
or more execute messages doing only fetches from the tuplestore created
in the first message. This corresponds to the case where
execute_is_fetch is set, for example.
Note that the query ID reporting done in ExecutorStart() is still
necessary, as an EXECUTE requires it. Query ID reporting is optimistic
and more calls to pgstat_report_query_id() don't matter as the first
report takes priority except if the report is forced. The comment in
ExecutorStart() is adjusted to reflect better the reality with the
extended query protocol.
The test added in pg_stat_statements is a courtesy of Robert Haas. This
uses psql's \bind metacommand, hence this part is backpatched down to
v16.
Reported-by: Kaido Vaikla, Erik Wienhold
Author: Sami Imseih
Reviewed-by: Jian He, Andrei Lepikhov, Michael Paquier
Discussion: https://postgr.es/m/CA+427g8DiW3aZ6pOpVgkPbqK97ouBdf18VLiHFesea2jUk3XoQ@mail.gmail.com
Discussion: https://postgr.es/m/CA+TgmoZxtnf_jZ=VqBSyaU8hfUkkwoJCJ6ufy4LGpXaunKrjrg@mail.gmail.com
Discussion: https://postgr.es/m/1391613709.939460.1684777418070@office.mailbox.org
Backpatch-through: 14
When pg_dump retrieves the list of database objects and performs the
data dump, there was possibility that objects are replaced with others
of the same name, such as views, and access them. This vulnerability
could result in code execution with superuser privileges during the
pg_dump process.
This issue can arise when dumping data of sequences, foreign
tables (only 13 or later), or tables registered with a WHERE clause in
the extension configuration table.
To address this, pg_dump now utilizes the newly introduced
restrict_nonsystem_relation_kind GUC parameter to restrict the
accesses to non-system views and foreign tables during the dump
process. This new GUC parameter is added to back branches too, but
these changes do not require cluster recreation.
Back-patch to all supported branches.
Reviewed-by: Noah Misch
Security: CVE-2024-7348
Backpatch-through: 12
Since PostgresMain calls sigsetjmp, any local variables that are not
marked "volatile" have a risk of unspecified behavior. In practice
this means that when control returns via longjmp, such variables might
get reset to their values as of the time of sigsetjmp, depending on
whether the compiler chose to put them in registers or on the stack.
We were careful about this for "send_ready_for_query", but not the
other local variables.
In the case of the timeout_enabled flags, resetting them to
their initial "false" states is actually good, since we do
"disable_all_timeouts()" in the longjmp cleanup code path. If that
does not happen, we risk uselessly calling "disable_timeout()" later,
which is harmless but a little bit expensive. Let's explicitly reset
these flags so that the behavior is correct and platform-independent.
(This change means that we really don't need the new "volatile"
markings after all, but let's install them anyway since any change
in this logic could re-introduce a problem.)
There is no issue for "firstchar" and "input_message" because those
are explicitly reinitialized each time through the query processing
loop. To make that clearer, move them to be declared inside the loop.
That leaves us with all the function-lifespan locals except the
sigjmp_buf itself marked as volatile, which seems like a good policy
to have going forward.
Because of the possibility of extra disable_timeout() calls, this
seems worth back-patching.
Sergey Shinderuk and Tom Lane
Discussion: https://postgr.es/m/2eda015b-7dff-47fd-d5e2-f1a9899b90a6@postgrespro.ru
Commits f92944137 et al. made IsInTransactionBlock() set the
XACT_FLAGS_NEEDIMMEDIATECOMMIT flag before returning "false",
on the grounds that that kept its API promises equivalent to those of
PreventInTransactionBlock(). This turns out to be a bad idea though,
because it allows an ANALYZE in a pipelined series of commands to
cause an immediate commit, which is unexpected.
Furthermore, if we return "false" then we have another issue,
which is that ANALYZE will decide it's allowed to do internal
commit-and-start-transaction sequences, thus possibly unexpectedly
committing the effects of previous commands in the pipeline.
To fix the latter situation, invent another transaction state flag
XACT_FLAGS_PIPELINING, which explicitly records the fact that we
have executed some extended-protocol command and not yet seen a
commit for it. Then, require that flag to not be set before allowing
InTransactionBlock() to return "false".
Having done that, we can remove its setting of NEEDIMMEDIATECOMMIT
without fear of causing problems. This means that the API guarantees
of IsInTransactionBlock now diverge from PreventInTransactionBlock,
which is mildly annoying, but it seems OK given the very limited usage
of IsInTransactionBlock. (In any case, a caller preferring the old
behavior could always set NEEDIMMEDIATECOMMIT for itself.)
For consistency also require XACT_FLAGS_PIPELINING to not be set
in PreventInTransactionBlock. This too is meant to prevent commands
such as CREATE DATABASE from silently committing previous commands
in a pipeline.
Per report from Peter Eisentraut. As before, back-patch to all
supported branches (which sadly no longer includes v10).
Discussion: https://postgr.es/m/65a899dd-aebc-f667-1d0a-abb89ff3abf8@enterprisedb.com
We have a few commands that "can't run in a transaction block",
meaning that if they complete their processing but then we fail
to COMMIT, we'll be left with inconsistent on-disk state.
However, the existing defenses for this are only watertight for
simple query protocol. In extended protocol, we didn't commit
until receiving a Sync message. Since the client is allowed to
issue another command instead of Sync, we're in trouble if that
command fails or is an explicit ROLLBACK. In any case, sitting
in an inconsistent state while waiting for a client message
that might not come seems pretty risky.
This case wasn't reachable via libpq before we introduced pipeline
mode, but it's always been an intended aspect of extended query
protocol, and likely there are other clients that could reach it
before.
To fix, set a flag in PreventInTransactionBlock that tells
exec_execute_message to force an immediate commit. This seems
to be the approach that does least damage to existing working
cases while still preventing the undesirable outcomes.
While here, add some documentation to protocol.sgml that explicitly
says how to use pipelining. That's latent in the existing docs if
you know what to look for, but it's better to spell it out; and it
provides a place to document this new behavior.
Per bug #17434 from Yugo Nagata. It's been wrong for ages,
so back-patch to all supported branches.
Discussion: https://postgr.es/m/17434-d9f7a064ce2a88a3@postgresql.org
SPI_commit previously left it up to the caller to recover from any error
occurring during commit. Since that's complicated and requires use of
low-level xact.c facilities, it's not too surprising that no caller got
it right. Let's move the responsibility for cleanup into spi.c. Doing
that requires redefining SPI_commit as starting a new transaction, so
that it becomes equivalent to SPI_commit_and_chain except that you get
default transaction characteristics instead of preserving the prior
transaction's characteristics. We can make this pretty transparent
API-wise by redefining SPI_start_transaction() as a no-op. Callers
that expect to do something in between might be surprised, but
available evidence is that no callers do so.
Having made that API redefinition, we can fix this mess by having
SPI_commit[_and_chain] trap errors and start a new, clean transaction
before re-throwing the error. Likewise for SPI_rollback[_and_chain].
Some cleanup is also needed in AtEOXact_SPI, which was nowhere near
smart enough to deal with SPI contexts nested inside a committing
context.
While plperl and pltcl need no changes beyond removing their now-useless
SPI_start_transaction() calls, plpython needs some more work because it
hadn't gotten the memo about catching commit/rollback errors in the
first place. Such an error resulted in longjmp'ing out of the Python
interpreter, which leaks Python stack entries at present and is reported
to crash Python 3.11 altogether. Add the missing logic to catch such
errors and convert them into Python exceptions.
This is a back-patch of commit 2e517818f. That's now aged long enough
to reduce the concerns about whether it will break something, and we
do need to ensure that supported branches will work with Python 3.11.
Peter Eisentraut and Tom Lane
Discussion: https://postgr.es/m/3375ffd8-d71c-2565-e348-a597d6e739e3@enterprisedb.com
Discussion: https://postgr.es/m/17416-ed8fe5d7213d6c25@postgresql.org
GCC 12 complains that set_stack_base is storing the address of
a local variable in a long-lived pointer. This is an entirely
reasonable warning (indeed, it just helped us find a bug);
but that behavior is intentional here. We can work around it
by using __builtin_frame_address(0) instead of a specific local
variable; that produces an address a dozen or so bytes different,
in my testing, but we don't care about such a small difference.
Maybe someday a compiler lacking that function will start to issue
a similar warning, but we'll worry about that when it happens.
Patch by me, per a suggestion from Andres Freund. Back-patch to
v12, which is as far back as the patch will go without some pain.
(Recently-established project policy would permit a back-patch as
far as 9.2, but I'm disinclined to expend the work until GCC 12
is much more widespread.)
Discussion: https://postgr.es/m/3773792.1645141467@sss.pgh.pa.us
Session statistics, as introduced by 960869da08, had several shortcomings:
- an additional GetCurrentTimestamp() call that also impaired the accuracy of
the data collected
This can be avoided by passing the current timestamp we already have in
pgstat_report_stat().
- an additional statistics UDP packet sent every 500ms
This is solved by adding the new statistics to PgStat_MsgTabstat.
This is conceptually ugly, because session statistics are not
table statistics. But the struct already contains data unrelated
to tables, so there is not much damage done.
Connection and disconnection are reported in separate messages, which
reduces the number of additional messages to two messages per session and a
slight increase in PgStat_MsgTabstat size (but the same number of table
stats fit).
- Session time computation could overflow on systems where long is 32 bit.
Reported-By: Andres Freund <andres@anarazel.de>
Author: Andres Freund <andres@anarazel.de>
Author: Laurenz Albe <laurenz.albe@cybertec.at>
Discussion: https://postgr.es/m/20210801205501.nyxzxoelqoo4x2qc%40alap3.anarazel.de
Backpatch: 14-, where the feature was introduced.
Formerly, we sent signals for outgoing NOTIFY messages within
ProcessCompletedNotifies, which was also responsible for sending
relevant ones of those messages to our connected client. It therefore
had to run during the main-loop processing that occurs just before
going idle. This arrangement had two big disadvantages:
* Now that procedures allow intra-command COMMITs, it would be
useful to send NOTIFYs to other sessions immediately at COMMIT
(though, for reasons of wire-protocol stability, we still shouldn't
forward them to our client until end of command).
* Background processes such as replication workers would not send
NOTIFYs at all, since they never execute the client communication
loop. We've had requests to allow triggers running in replication
workers to send NOTIFYs, so that's a problem.
To fix these things, move transmission of outgoing NOTIFY signals
into AtCommit_Notify, where it will happen during CommitTransaction.
Also move the possible call of asyncQueueAdvanceTail there, to
ensure we don't bloat the async SLRU if a background worker sends
many NOTIFYs with no one listening.
We can also drop the call of asyncQueueReadAllNotifications,
allowing ProcessCompletedNotifies to go away entirely. That's
because commit 790026972 added a call of ProcessNotifyInterrupt
adjacent to PostgresMain's call of ProcessCompletedNotifies,
and that does its own call of asyncQueueReadAllNotifications,
meaning that we were uselessly doing two such calls (inside two
separate transactions) whenever inbound notify signals coincided
with an outbound notify. We need only set notifyInterruptPending
to ensure that ProcessNotifyInterrupt runs, and we're done.
The existing documentation suggests that custom background workers
should call ProcessCompletedNotifies if they want to send NOTIFY
messages. To avoid an ABI break in the back branches, reduce it
to an empty routine rather than removing it entirely. Removal
will occur in v15.
Although the problems mentioned above have existed for awhile,
I don't feel comfortable back-patching this any further than v13.
There was quite a bit of churn in adjacent code between 12 and 13.
At minimum we'd have to also backpatch 51004c717, and a good deal
of other adjustment would also be needed, so the benefit-to-risk
ratio doesn't look attractive.
Per bug #15293 from Michael Powers (and similar gripes from others).
Artur Zakirov and Tom Lane
Discussion: https://postgr.es/m/153243441449.1404.2274116228506175596@wrigleys.postgresql.org
Allowing only on/off meant that all either all existing configuration
guides would become obsolete if we disabled it by default, or that we
would have to accept a performance loss in the default config if we
enabled it by default. By allowing 'auto' as a middle ground, the
performance cost is only paid by those who enable pg_stat_statements and
similar modules.
I only edited the release notes to comment-out a paragraph that is now
factually wrong; further edits are probably needed to describe the
related change in more detail.
Author: Julien Rouhaud <rjuju123@gmail.com>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Discussion: https://postgr.es/m/20210513002623.eugftm4nk2lvvks3@nol
Split up CHECK_FOR_INTERRUPTS() to provide an additional macro
INTERRUPTS_PENDING_CONDITION(), which just tests whether an
interrupt is pending without attempting to service it. This is
useful in situations where the caller knows that interrupts are
blocked, and would like to find out if it's worth the trouble
to unblock them.
Also add INTERRUPTS_CAN_BE_PROCESSED(), which indicates whether
CHECK_FOR_INTERRUPTS() can be relied on to clear the pending interrupt.
This commit doesn't actually add any uses of the new macros,
but a follow-on bug fix will do so. Back-patch to all supported
branches to provide infrastructure for that fix.
Alvaro Herrera and Tom Lane
Discussion: https://postgr.es/m/20210513155351.GA7848@alvherre.pgsql
Also "make reformat-dat-files".
The only change worthy of note is that pgindent messed up the formatting
of launcher.c's struct LogicalRepWorkerId, which led me to notice that
that struct wasn't used at all anymore, so I just took it out.
We had a report of confusing server behavior caused by a client bug
that sent junk to the server: the server thought the junk was a
very long message length and waited patiently for data that would
never come. We can reduce the risk of that by being less trusting
about message lengths.
For a long time, libpq has had a heuristic rule that it wouldn't
believe large message size words, except for a small number of
message types that are expected to be (potentially) long. This
provides some defense against loss of message-boundary sync and
other corrupted-data cases. The server does something similar,
except that up to now it only limited the lengths of messages
received during the connection authentication phase. Let's
do the same as in libpq and put restrictions on the allowed
length of all messages, while distinguishing between message
types that are expected to be long and those that aren't.
I used a limit of 10000 bytes for non-long messages. (libpq's
corresponding limit is 30000 bytes, but given the asymmetry of
the FE/BE protocol, there's no good reason why the numbers should
be the same.) Experimentation suggests that this is at least a
factor of 10, maybe a factor of 100, more than we really need;
but plenty of daylight seems desirable to avoid false positives.
In any case we can adjust the limit based on beta-test results.
For long messages, set a limit of MaxAllocSize - 1, which is the
most that we can absorb into the StringInfo buffer that the message
is collected in. This just serves to make sure that a bogus message
size is reported as such, rather than as a confusing gripe about
not being able to enlarge a string buffer.
While at it, make sure that non-mainline code paths (such as
COPY FROM STDIN) are as paranoid as SocketBackend is, and validate
the message type code before believing the message length.
This provides an additional guard against getting stuck on corrupted
input.
Discussion: https://postgr.es/m/2003757.1619373089@sss.pgh.pa.us
Previously, it was pg_stat_activity.queryid to match the
pg_stat_statements queryid column. This is an adjustment to patch
4f0b0966c8. This also adjusts some of the internal function calls to
match. Catversion bumped.
Reported-by: Álvaro Herrera, Julien Rouhaud
Discussion: https://postgr.es/m/20210408032704.GA7498@alvherre.pgsql
This adds support for writing CREATE FUNCTION and CREATE PROCEDURE
statements for language SQL with a function body that conforms to the
SQL standard and is portable to other implementations.
Instead of the PostgreSQL-specific AS $$ string literal $$ syntax,
this allows writing out the SQL statements making up the body
unquoted, either as a single statement:
CREATE FUNCTION add(a integer, b integer) RETURNS integer
LANGUAGE SQL
RETURN a + b;
or as a block
CREATE PROCEDURE insert_data(a integer, b integer)
LANGUAGE SQL
BEGIN ATOMIC
INSERT INTO tbl VALUES (a);
INSERT INTO tbl VALUES (b);
END;
The function body is parsed at function definition time and stored as
expression nodes in a new pg_proc column prosqlbody. So at run time,
no further parsing is required.
However, this form does not support polymorphic arguments, because
there is no more parse analysis done at call time.
Dependencies between the function and the objects it uses are fully
tracked.
A new RETURN statement is introduced. This can only be used inside
function bodies. Internally, it is treated much like a SELECT
statement.
psql needs some new intelligence to keep track of function body
boundaries so that it doesn't send off statements when it sees
semicolons that are inside a function body.
Tested-by: Jaime Casanova <jcasanov@systemguards.com.ec>
Reviewed-by: Julien Rouhaud <rjuju123@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/1c11f1eb-f00c-43b7-799d-2d44132c02d7@2ndquadrant.com
Use the in-core query id computation for pg_stat_activity,
log_line_prefix, and EXPLAIN VERBOSE.
Similar to other fields in pg_stat_activity, only the queryid from the
top level statements are exposed, and if the backends status isn't
active then the queryid from the last executed statements is displayed.
Add a %Q placeholder to include the queryid in log_line_prefix, which
will also only expose top level statements.
For EXPLAIN VERBOSE, if a query identifier has been computed, either by
enabling compute_query_id or using a third-party module, display it.
Bump catalog version.
Discussion: https://postgr.es/m/20210407125726.tkvjdbw76hxnpwfi@nol
Author: Julien Rouhaud
Reviewed-by: Alvaro Herrera, Nitin Jadhav, Zhihong Yu
Add compute_query_id GUC to control whether a query identifier should be
computed by the core (off by default). It's thefore now possible to
disable core queryid computation and use pg_stat_statements with a
different algorithm to compute the query identifier by using a
third-party module.
To ensure that a single source of query identifier can be used and is
well defined, modules that calculate a query identifier should throw an
error if compute_query_id specified to compute a query id and if a query
idenfitier was already calculated.
Discussion: https://postgr.es/m/20210407125726.tkvjdbw76hxnpwfi@nol
Author: Julien Rouhaud
Reviewed-by: Alvaro Herrera, Nitin Jadhav, Zhihong Yu
Commit 3e98c0bafb added pg_backend_memory_contexts view to display
the memory contexts of the backend process. However its target process
is limited to the backend that is accessing to the view. So this is
not so convenient when investigating the local memory bloat of other
backend process. To improve this situation, this commit adds
pg_log_backend_memory_contexts() function that requests to log
the memory contexts of the specified backend process.
This information can be also collected by calling
MemoryContextStats(TopMemoryContext) via a debugger. But
this technique cannot be used in some environments because no debugger
is available there. So, pg_log_backend_memory_contexts() allows us to
see the memory contexts of specified backend more easily.
Only superusers are allowed to request to log the memory contexts
because allowing any users to issue this request at an unbounded rate
would cause lots of log messages and which can lead to denial of service.
On receipt of the request, at the next CHECK_FOR_INTERRUPTS(),
the target backend logs its memory contexts at LOG_SERVER_ONLY level,
so that these memory contexts will appear in the server log but not
be sent to the client. It logs one message per memory context.
Because if it buffers all memory contexts into StringInfo to log them
as one message, which may require the buffer to be enlarged very much
and lead to OOM error since there can be a large number of memory
contexts in a backend.
When a backend process is consuming huge memory, logging all its
memory contexts might overrun available disk space. To prevent this,
now this patch limits the number of child contexts to log per parent
to 100. As with MemoryContextStats(), it supposes that practical cases
where the log gets long will typically be huge numbers of siblings
under the same parent context; while the additional debugging value
from seeing details about individual siblings beyond 100 will not be large.
There was another proposed patch to add the function to return
the memory contexts of specified backend as the result sets,
instead of logging them, in the discussion. However that patch is
not included in this commit because it had several issues to address.
Thanks to Tatsuhito Kasahara, Andres Freund, Tom Lane, Tomas Vondra,
Michael Paquier, Kyotaro Horiguchi and Zhihong Yu for the discussion.
Bump catalog version.
Author: Atsushi Torikoshi
Reviewed-by: Kyotaro Horiguchi, Zhihong Yu, Fujii Masao
Discussion: https://postgr.es/m/0271f440ac77f2a4180e0e56ebd944d1@oss.nttdata.com
Provide a new GUC check_client_connection_interval that can be used to
check whether the client connection has gone away, while running very
long queries. It is disabled by default.
For now this uses a non-standard Linux extension (also adopted by at
least one other OS). POLLRDHUP is not defined by POSIX, and other OSes
don't have a reliable way to know if a connection was closed without
actually trying to read or write.
In future we might consider trying to send a no-op/heartbeat message
instead, but that could require protocol changes.
Author: Sergey Cherkashin <s.cherkashin@postgrespro.ru>
Author: Thomas Munro <thomas.munro@gmail.com>
Reviewed-by: Thomas Munro <thomas.munro@gmail.com>
Reviewed-by: Tatsuo Ishii <ishii@sraoss.co.jp>
Reviewed-by: Konstantin Knizhnik <k.knizhnik@postgrespro.ru>
Reviewed-by: Zhihong Yu <zyu@yugabyte.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Maksim Milyutin <milyutinma@gmail.com>
Reviewed-by: Tsunakawa, Takayuki/綱川 貴之 <tsunakawa.takay@fujitsu.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us> (much earlier version)
Discussion: https://postgr.es/m/77def86b27e41f0efcba411460e929ae%40postgrespro.ru
Since commit ba79cb5dc, values of bind parameters have been logged
during errors in extended query mode. However, we only did that after
we'd collected and converted all the parameter values, thus failing to
offer any useful localization of invalid-parameter problems. Add a
separate callback that's used during parameter collection, and have it
print the parameter number, along with the input string if text input
format is used.
Justin Pryzby and Tom Lane
Discussion: https://postgr.es/m/20210104170939.GH9712@telsasoft.com
Discussion: https://postgr.es/m/CANfkH5k-6nNt-4cSv1vPB80nq2BZCzhFVR5O4VznYbsX0wZmow@mail.gmail.com
Protocol version 3 was introduced in PostgreSQL 7.4. There shouldn't be
many clients or servers left out there without version 3 support. But as
a courtesy, I kept just enough of the old protocol support that we can
still send the "unsupported protocol version" error in v2 format, so that
old clients can display the message properly. Likewise, libpq still
understands v2 ErrorResponse messages when establishing a connection.
The impetus to do this now is that I'm working on a patch to COPY
FROM, to always prefetch some data. We cannot do that safely with the
old protocol, because it requires parsing the input one byte at a time
to detect the end-of-copy marker.
Reviewed-by: Tom Lane, Alvaro Herrera, John Naylor
Discussion: https://www.postgresql.org/message-id/9ec25819-0a8a-d51a-17dc-4150bb3cca3b%40iki.fi
This patch essentially is cleaning up technical debt left behind
by the original implementation of plpgsql procedures, particularly
commit d92bc83c4. That patch (or more precisely, follow-on patches
fixing its worst bugs) forced us to re-plan CALL and DO statements
each time through, if we're in a non-atomic context. That wasn't
for any fundamental reason, but just because use of a saved plan
requires having a ResourceOwner to hold a reference count for the
plan, and we had no suitable resowner at hand, nor would the
available APIs support using one if we did. While it's not that
expensive to create a "plan" for CALL/DO, the cycles do add up
in repeated executions.
This patch therefore makes the following API changes:
* GetCachedPlan/ReleaseCachedPlan are modified to let the caller
specify which resowner to use to pin the plan, rather than forcing
use of CurrentResourceOwner.
* spi.c gains a "SPI_execute_plan_extended" entry point that lets
callers say which resowner to use to pin the plan. This borrows the
idea of an options struct from the recently added SPI_prepare_extended,
hopefully allowing future options to be added without more API breaks.
This supersedes SPI_execute_plan_with_paramlist (which I've marked
deprecated) as well as SPI_execute_plan_with_receiver (which is new
in v14, so I just took it out altogether).
* I also took the opportunity to remove the crude hack of letting
plpgsql reach into SPI private data structures to mark SPI plans as
"no_snapshot". It's better to treat that as an option of
SPI_prepare_extended.
Now, when running a non-atomic procedure or DO block that contains
any CALL or DO commands, plpgsql creates a ResourceOwner that
will be used to pin the plans of the CALL/DO commands. (In an
atomic context, we just use CurrentResourceOwner, as before.)
Having done this, we can just save CALL/DO plans normally,
whether or not they are used across transaction boundaries.
This seems to be good for something like 2X speedup of a CALL
of a trivial procedure with a few simple argument expressions.
By restricting the creation of an extra ResourceOwner like this,
there's essentially zero penalty in cases that can't benefit.
Pavel Stehule, with some further hacking by me
Discussion: https://postgr.es/m/CAFj8pRCLPdDAETvR7Po7gC5y_ibkn_-bOzbeJb39WHms01194Q@mail.gmail.com
This add counters for number of sessions, the different kind of session
termination types, and timers for how much time is spent in active vs
idle in a database to pg_stat_database.
Internally this also renames the parameter "force" to disconnect. This
was the only use-case for the parameter before, so repurposing it to
this mroe narrow usecase makes things cleaner than inventing something
new.
Author: Laurenz Albe
Reviewed-By: Magnus Hagander, Soumyadeep Chakraborty, Masahiro Ikeda
Discussion: https://postgr.es/m/b07e1f9953701b90c66ed368656f2aef40cac4fb.camel@cybertec.at
On reflection, the order of operations in PostgresMain() is wrong.
These timeouts ought to be shut down before, not after, we do the
post-command-read CHECK_FOR_INTERRUPTS, to guarantee that any
timeout error will be detected there rather than at some ill-defined
later point (possibly after having wasted a lot of work).
This is really an error in the original idle_in_transaction_timeout
patch, so back-patch to 9.6 where that was introduced.
This GUC variable works much like idle_in_transaction_session_timeout,
in that it kills sessions that have waited too long for a new client
query. But it applies when we're not in a transaction, rather than
when we are.
Li Japin, reviewed by David Johnston and Hayato Kuroda, some
fixes by me
Discussion: https://postgr.es/m/763A0689-F189-459E-946F-F0EC4458980B@hotmail.com
The deadlocks that the recovery conflict on lock is involved in can
happen between hot-standby backends and the startup process.
If a backend takes an access exclusive lock on the table and which
finally triggers the deadlock, that deadlock can be detected
as expected. On the other hand, previously, if the startup process
took an access exclusive lock and which finally triggered the deadlock,
that deadlock could not be detected and could remain even after
deadlock_timeout passed. This is a bug.
The cause of this bug was that the code for handling the recovery
conflict on lock didn't take care of deadlock case at all. It assumed
that deadlocks involving the startup process and backends were able
to be detected by the deadlock detector invoked within backends.
But this assumption was incorrect. The startup process also should
have invoked the deadlock detector if necessary.
To fix this bug, this commit makes the startup process invoke
the deadlock detector if deadlock_timeout is reached while handling
the recovery conflict on lock. Specifically, in that case, the startup
process requests all the backends holding the conflicting locks to
check themselves for deadlocks.
Back-patch to v9.6. v9.5 has also this bug, but per discussion we decided
not to back-patch the fix to v9.5. Because v9.5 doesn't have some
infrastructure codes (e.g., 37c54863cf) that this bug fix patch depends on.
We can apply those codes for the back-patch, but since the next minor
version release is the final one for v9.5, it's risky to do that. If we
unexpectedly introduce new bug to v9.5 by the back-patch, there is no
chance to fix that. We determined that the back-patch to v9.5 would give
more risk than gain.
Author: Fujii Masao
Reviewed-by: Bertrand Drouvot, Masahiko Sawada, Kyotaro Horiguchi
Discussion: https://postgr.es/m/4041d6b6-cf24-a120-36fa-1294220f8243@oss.nttdata.com
This patch essentially allows gram.y to implement a family of related
syntax trees, rather than necessarily always parsing a list of SQL
statements. raw_parser() gains a new argument, enum RawParseMode,
to say what to do. As proof of concept, add a mode that just parses
a TypeName without any other decoration, and use that to greatly
simplify typeStringToTypeName().
In addition, invent a new SPI entry point SPI_prepare_extended() to
allow SPI users (particularly plpgsql) to get at this new functionality.
In hopes of making this the last variant of SPI_prepare(), set up its
additional arguments as a struct rather than direct arguments, and
promise that future additions to the struct can default to zero.
SPI_prepare_cursor() and SPI_prepare_params() can perhaps go away at
some point.
Discussion: https://postgr.es/m/4165684.1607707277@sss.pgh.pa.us
When the postmaster sends SIGQUIT to its children, there's no real
need for all the children to log that fact; the postmaster already
made a log entry about it, so adding perhaps dozens or hundreds of
child-process log entries adds nothing of value. So, let's introduce
a new ereport level to specify "WARNING, but never send to log" and
use that for these messages.
Such a change wouldn't have been desirable before commit 7e784d1dc,
because if someone manually SIGQUIT's a backend, we *do* want to log
that. But now we can tell the difference between a signal that was
issued by the postmaster and one that was not with reasonable
certainty.
While we're here, also clear error_context_stack before ereport'ing,
to prevent error callbacks from being invoked in the signal-handler
context. This should reduce the odds of getting hung up while trying
to notify the client.
Per a suggestion from Andres Freund.
Discussion: https://postgr.es/m/20201225230331.hru3u6obyy6j53tk@alap3.anarazel.de
The patch needs test cases, reorganization, and cfbot testing.
Technically reverts commits 5c31afc49d..e35b2bad1a (exclusive/inclusive)
and 08db7c63f3..ccbe34139b.
Reported-by: Tom Lane, Michael Paquier
Discussion: https://postgr.es/m/E1ktAAG-0002V2-VB@gemulon.postgresql.org
This adds a key management system that stores (currently) two data
encryption keys of length 128, 192, or 256 bits. The data keys are
AES256 encrypted using a key encryption key, and validated via GCM
cipher mode. A command to obtain the key encryption key must be
specified at initdb time, and will be run at every database server
start. New parameters allow a file descriptor open to the terminal to
be passed. pg_upgrade support has also been added.
Discussion: https://postgr.es/m/CA+fd4k7q5o6Nc_AaX6BcYM9yqTbC6_pnH-6nSD=54Zp6NBQTCQ@mail.gmail.com
Discussion: https://postgr.es/m/20201202213814.GG20285@momjian.us
Author: Masahiko Sawada, me, Stephen Frost
Up to now, if the DBA issued "pg_ctl stop -m immediate", the message
sent to clients was the same as for a crash-and-restart situation.
This is confusing, not least because the message claims that the
database will soon be up again, something we have no business
predicting.
Improve things so that we can generate distinct messages for the two
cases (and also recognize an ad-hoc SIGQUIT, should somebody try that).
To do that, add a field to pmsignal.c's shared memory data structure
that the postmaster sets just before broadcasting SIGQUIT to its
children. No interlocking seems to be necessary; the intervening
signal-sending and signal-receipt should sufficiently serialize accesses
to the field. Hence, this isn't any riskier than the existing usages
of pmsignal.c.
We might in future extend this idea to improve other
postmaster-to-children signal scenarios, although none of them
currently seem to be as badly overloaded as SIGQUIT.
Discussion: https://postgr.es/m/559291.1608587013@sss.pgh.pa.us
Previously the shutdown of a background worker that uses die() as
SIGTERM signal handler produced the log message "terminating
connection due to administrator command". This log message was
confusing because a background worker is not a connection.
This commit improves that log message to "terminating background
worker XXX due to administrator command" (XXX is replaced with
the name of the background worker). This is the same log message
as another SIGTERM signal handler bgworker_die() for a background
worker reports.
Author: Bharath Rupireddy
Reviewed-by: Fujii Masao
Discussion: https://postgr.es/m/3f292fbb-f155-9a01-7cb2-7ccc9007ab3f@oss.nttdata.com
Up to now, we sent a ParameterStatus message to the client immediately
upon any change in the active value of any GUC_REPORT variable. This
was only barely okay when the feature was designed; now that we have
things like function SET clauses, there are very plausible use-cases
where a GUC_REPORT variable might change many times within a query
--- and even end up back at its original value, perhaps. Fortunately
most of our GUC_REPORT variables are unlikely to be changed often;
but there are proposals in play to enlarge that set, or even make it
user-configurable.
Hence, let's fix things to not generate more than one ParameterStatus
message per variable per query, and to not send any message at all
unless the end-of-query value is different from what we last reported.
Discussion: https://postgr.es/m/5708.1601145259@sss.pgh.pa.us
We decided that the policy established in commit 7634bd4f6 for
the bgwriter, checkpointer, walwriter, and walreceiver processes,
namely that they should accept SIGQUIT at all times, really ought
to apply uniformly to all postmaster children. Therefore, get
rid of the duplicative and inconsistent per-process code for
establishing that signal handler and removing SIGQUIT from BlockSig.
Instead, make InitPostmasterChild do it.
The handler set up by InitPostmasterChild is SignalHandlerForCrashExit,
which just summarily does _exit(2). In interactive backends, we
almost immediately replace that with quickdie, since we would prefer
to try to tell the client that we're dying. However, this patch is
changing the behavior of autovacuum (both launcher and workers), as
well as walsenders. Those processes formerly also used quickdie,
but AFAICS that was just mindless copy-and-paste: they don't have
any interactive client that's likely to benefit from being told this.
The stats collector continues to be an outlier, in that it thinks
SIGQUIT means normal exit. That should probably be changed for
consistency, but there's another patch set where that's being
dealt with, so I didn't do so here.
Discussion: https://postgr.es/m/644875.1599933441@sss.pgh.pa.us
This patch replaces the boolean GUC log_parameters_on_error introduced
by commit ba79cb5dc with an integer log_parameter_max_length_on_error,
adding the ability to specify how many bytes to trim each logged
parameter value to. (The previous coding hard-wired that choice at
64 bytes.)
In addition, add a new parameter log_parameter_max_length that provides
similar control over truncation of query parameters that are logged in
response to statement-logging options, as opposed to errors. Previous
releases always logged such parameters in full, possibly causing log
bloat.
For backwards compatibility with prior releases,
log_parameter_max_length defaults to -1 (log in full), while
log_parameter_max_length_on_error defaults to 0 (no logging).
Per discussion, log_parameter_max_length is SUSET since the DBA should
control routine logging behavior, but log_parameter_max_length_on_error
is USERSET because it also affects errcontext data sent back to the
client.
Alexey Bashtanov, editorialized a little by me
Discussion: https://postgr.es/m/b10493cc-a399-a03a-67c7-068f2791ee50@imap.cc
This commit adds query_string argument into the planner-related functions
and hook and allows us to pass the query string to them.
Currently there is no user of the query string passed. But the upcoming patch
for the planning counters will add the planning hook function into
pg_stat_statements and the function will need the query string. So this change
will be necessary for that patch.
Also this change is useful for some extensions that want to use the query
string in their planner hook function.
Author: Pascal Legrand, Julien Rouhaud
Reviewed-by: Yoshikazu Imai, Tom Lane, Fujii Masao
Discussion: https://postgr.es/m/CAOBaU_bU1m3_XF5qKYtSj1ua4dxd=FWDyh2SH4rSJAUUfsGmAQ@mail.gmail.com
Discussion: https://postgr.es/m/1583789487074-0.post@n3.nabble.com
Now that we require C99, we can depend on __VA_ARGS__ to work, and
revising ereport() to use it has several significant benefits:
* The extra parentheses around the auxiliary function calls are now
optional. Aside from being a bit less ugly, this removes a common
gotcha for new contributors, because in some cases the compiler errors
you got from forgetting them were unintelligible.
* The auxiliary function calls are now evaluated as a comma expression
list rather than as extra arguments to errfinish(). This means that
compilers can be expected to warn about no-op expressions in the list,
allowing detection of several other common mistakes such as forgetting
to add errmsg(...) when converting an elog() call to ereport().
* Unlike the situation with extra function arguments, comma expressions
are guaranteed to be evaluated left-to-right, so this removes platform
dependency in the order of the auxiliary function calls. While that
dependency hasn't caused us big problems in the past, this change does
allow dropping some rather shaky assumptions around errcontext() domain
handling.
There's no intention to make wholesale changes of existing ereport
calls, but as proof-of-concept this patch removes the extra parens
from a couple of calls in postgres.c.
While new code can be written either way, code intended to be
back-patched will need to use extra parens for awhile yet. It seems
worth back-patching this change into v12, so as to reduce the window
where we have to be careful about that by one year. Hence, this patch
is careful to preserve ABI compatibility; a followup HEAD-only patch
will make some additional simplifications.
Andres Freund and Tom Lane
Discussion: https://postgr.es/m/CA+fd4k6N8EjNvZpM8nme+y+05mz-SM8Z_BgkixzkA34R+ej0Kw@mail.gmail.com
The init_ps_display() arguments were mostly lies by now, so to match
typical usage, just use one argument and let the caller assemble it
from multiple sources if necessary. The only user of the additional
arguments is BackendInitialize(), which was already doing string
assembly on the caller side anyway.
Remove the second argument of set_ps_display() ("force") and just
handle that in init_ps_display() internally.
BackendInitialize() also used to set the initial status as
"authentication", but that was very far from where authentication
actually happened. So now it's set to "initializing" and then
"authentication" just before the actual call to
ClientAuthentication().
Reviewed-by: Julien Rouhaud <rjuju123@gmail.com>
Reviewed-by: Kuntal Ghosh <kuntalghosh.2007@gmail.com>
Reviewed-by: Alvaro Herrera <alvherre@2ndquadrant.com>
Discussion: https://www.postgresql.org/message-id/flat/c65e5196-4f04-4ead-9353-6088c19615a3@2ndquadrant.com
The backend was using strings to represent command tags and doing string
comparisons in multiple places, but that's slow and unhelpful. Create a
new command list with a supporting structure to use instead; this is
stored in a tag-list-file that can be tailored to specific purposes with
a caller-definable C macro, similar to what we do for WAL resource
managers. The first first such uses are a new CommandTag enum and a
CommandTagBehavior struct.
Replace numerous occurrences of char *completionTag with a
QueryCompletion struct so that the code no longer stores information
about completed queries in a cstring. Only at the last moment, in
EndCommand(), does this get converted to a string.
EventTriggerCacheItem no longer holds an array of palloc’d tag strings
in sorted order, but rather just a Bitmapset over the CommandTags.
Author: Mark Dilger, with unsolicited help from Álvaro Herrera
Reviewed-by: John Naylor, Tom Lane
Discussion: https://postgr.es/m/981A9DB4-3F0C-4DA5-88AD-CB9CFF4D6CAD@enterprisedb.com
A new function EmitProcSignalBarrier() can be used to emit a global
barrier which all backends that participate in the ProcSignal
mechanism must absorb, and a new function WaitForProcSignalBarrier()
can be used to wait until all relevant backends have in fact
absorbed the barrier.
This can be used to coordinate global state changes, such as turning
checksums on while the system is running.
There's no real client of this mechanism yet, although two are
proposed, but an enum has to have at least one element, so this
includes a placeholder type (PROCSIGNAL_BARRIER_PLACEHOLDER) which
should be replaced by the first real client of this mechanism to
get committed.
Andres Freund and Robert Haas, reviewed by Daniel Gustafsson and,
in earlier versions, by Magnus Hagander.
Discussion: http://postgr.es/m/CA+TgmoZwDk=BguVDVa+qdA6SBKef=PKbaKDQALTC_9qoz1mJqg@mail.gmail.com
Where possible, share signal handler code and main loop interrupt
checking. This saves quite a bit of code and should simplify
maintenance, too.
This commit intends not to change the way anything works, even
though that might allow more code to be unified. It does unify
a bunch of individual variables into a ShutdownRequestPending
flag that has is now used by a bunch of different process types,
though.
Patch by me, reviewed by Andres Freund and Daniel Gustafsson.
Discussion: http://postgr.es/m/CA+TgmoZwDk=BguVDVa+qdA6SBKef=PKbaKDQALTC_9qoz1mJqg@mail.gmail.com
