when we first read the page, rather than checking them one at a time.
This allows us to take and release the buffer content lock just once
per page, instead of once per tuple. Since it's a shared lock the
contention penalty for holding the lock longer shouldn't be too bad.
We can safely do this only when using an MVCC snapshot; else the
assumption that visibility won't change over time is uncool. Therefore
there are now two code paths depending on the snapshot type. I also
made the same change in nodeBitmapHeapscan.c, where it can be done always
because we only support MVCC snapshots for bitmap scans anyway.
Also make some incidental cleanups in the APIs of these functions.
Per a suggestion from Qingqing Zhou.
comment line where output as too long, and update typedefs for /lib
directory. Also fix case where identifiers were used as variable names
in the backend, but as typedefs in ecpg (favor the backend for
indenting).
Backpatch to 8.1.X.
tuple in-place, but instead passes back an all-new tuple structure if
any changes are needed. This is a much cleaner and more robust solution
for the bug discovered by Alexey Beschiokov; accordingly, revert the
quick hack I installed yesterday.
With this change, HeapTupleData.t_datamcxt is no longer needed; will
remove it in a separate commit in HEAD only.
generated by bitmap index scans. Along the way, simplify and speed up
the code for counting sequential and index scans; it was both confusing
and inefficient to be taking care of that in the per-tuple loops, IMHO.
initdb forced because of internal changes in pg_stat view definitions.
insufficient paranoia in code that follows t_ctid links. (We must do both
because even with VACUUM doing it properly, the intermediate state with
a dangling t_ctid link is visible concurrently during lazy VACUUM, and
could be seen afterwards if either type of VACUUM crashes partway through.)
Also try to improve documentation about what's going on. Patch is a bit
bulky because passing the XMAX information around required changing the
APIs of some low-level heapam.c routines, but it's not conceptually very
complicated. Per trouble report from Teodor and subsequent analysis.
This needs to be back-patched, but I'll do that after 8.1 beta is out.
whenever we generate a new OID. This prevents occasional duplicate-OID
errors that can otherwise occur once the OID counter has wrapped around.
Duplicate relfilenode values are also checked for when creating new
physical files. Per my recent proposal.
(a/k/a SELECT INTO). Instead, flush and fsync the whole relation before
committing. We do still need the WAL log when PITR is active, however.
Simon Riggs and Tom Lane.
transaction IDs, rather than like subtrans; in particular, the information
now survives a database restart. Per previous discussion, this is
essential for PITR log shipping and for 2PC.
up have the standard layout with unused space between pd_lower and pd_upper.
When this is set, XLogInsert will omit the unused space without bothering
to scan it to see if it's zero. That saves time in XLogInsert, and also
allows reversion of my earlier patch to make PageRepairFragmentation et al
explicitly re-zero freed space. Per suggestion by Heikki Linnakangas.
communication structure, and make it its own module with its own lock.
This should reduce contention at least a little, and it definitely makes
the code seem cleaner. Per my recent proposal.
is contention for a tuple-level lock. This solves the problem of a
would-be exclusive locker being starved out by an indefinite succession
of share-lockers. Per recent discussion with Alvaro.
to eliminate unnecessary deadlocks. This commit adds SELECT ... FOR SHARE
paralleling SELECT ... FOR UPDATE. The implementation uses a new SLRU
data structure (managed much like pg_subtrans) to represent multiple-
transaction-ID sets. When more than one transaction is holding a shared
lock on a particular row, we create a MultiXactId representing that set
of transactions and store its ID in the row's XMAX. This scheme allows
an effectively unlimited number of row locks, just as we did before,
while not costing any extra overhead except when a shared lock actually
has to be shared. Still TODO: use the regular lock manager to control
the grant order when multiple backends are waiting for a row lock.
Alvaro Herrera and Tom Lane.
indexes. Replace all heap_openr and index_openr calls by heap_open
and index_open. Remove runtime lookups of catalog OID numbers in
various places. Remove relcache's support for looking up system
catalogs by name. Bulky but mostly very boring patch ...
transaction rollback via UNDO but I think that's highly unlikely to
happen, so we may as well remove the stubs. (Someday we ought to
rip out the stub xxx_undo routines, too.) Per Alvaro.
access: define new index access method functions 'amgetmulti' that can
fetch multiple TIDs per call. (The functions exist but are totally
untested as yet.) Since I was modifying pg_am anyway, remove the
no-longer-needed 'rel' parameter from amcostestimate functions, and
also remove the vestigial amowner column that was creating useless
work for Alvaro's shared-object-dependencies project.
Initdb forced due to changes in pg_am.
the AMI_OVERRIDE flag. The fact that TransactionLogFetch treats
BootstrapTransactionId as always committed is sufficient to make
bootstrap work, and getting rid of extra tests in heavily used code
paths seems like a win. The files produced by initdb are demonstrably
the same after this change.
Also performed an initial run through of upgrading our Copyright date to
extend to 2005 ... first run here was very simple ... change everything
where: grep 1996-2004 && the word 'Copyright' ... scanned through the
generated list with 'less' first, and after, to make sure that I only
picked up the right entries ...
buffer is valid, as ReadBuffer() will elog on error. Most of the call
sites of ReadBuffer() got this right, but this patch fixes those call
sites that did not.
in all cases when keep_buf = true. This allows ANALYZE's inner loop to
use heap_release_fetch, which saves multiple buffer lookups for the same
page and avoids overestimation of cost by the vacuum cost mechanism.
http://archives.postgresql.org/pgsql-hackers/2004-10/msg00464.php.
This fix is intended to be permanent: it moves the responsibility for
calling SetBufferCommitInfoNeedsSave() into the tqual.c routines,
eliminating the requirement for callers to test whether t_infomask changed.
Also, tighten validity checking on buffer IDs in bufmgr.c --- several
routines were paranoid about out-of-range shared buffer numbers but not
about out-of-range local ones, which seems a tad pointless.
to unreserved keyword, use ereport not elog, assign a separate error code
for 'could not obtain lock' so that applications will be able to detect
that case cleanly.
creating a new tuple. This is just for debugging sanity, though, since
nothing should be paying any attention to xmax when the HEAP_XMAX_INVALID
bit is set.
as per recent discussions. Invent SubTransactionIds that are managed like
CommandIds (ie, counter is reset at start of each top transaction), and
use these instead of TransactionIds to keep track of subtransaction status
in those modules that need it. This means that a subtransaction does not
need an XID unless it actually inserts/modifies rows in the database.
Accordingly, don't assign it an XID nor take a lock on the XID until it
tries to do that. This saves a lot of overhead for subtransactions that
are only used for error recovery (eg plpgsql exceptions). Also, arrange
to release a subtransaction's XID lock as soon as the subtransaction
exits, in both the commit and abort cases. This avoids holding many
unique locks after a long series of subtransactions. The price is some
additional overhead in XactLockTableWait, but that seems acceptable.
Finally, restructure the state machine in xact.c to have a more orthogonal
set of states for subtransactions.
((Snapshot) NULL) can no longer be confused with a valid snapshot,
as per my recent suggestion. Define a macro InvalidSnapshot for 0.
Use InvalidSnapshot instead of SnapshotAny as the do-nothing special
case for heap_update and heap_delete crosschecks; this seems a little
cleaner even though the behavior is really the same.
recovery more manageable. Also, undo recent change to add FILE_HEADER
and WASTED_SPACE records to XLOG; instead make the XLOG page header
variable-size with extra fields in the first page of an XLOG file.
This should fix the boundary-case bugs observed by Mark Kirkwood.
initdb forced due to change of XLOG representation.
shift support code into heapam.c accordingly. This is in service of
soon-to-be-committed ALTER TABLE SET TABLESPACE code that will want to
use this same record type for both heaps and indexes.
Theoretically I should have forced initdb for this, but in practice there
is no change in xlog contents because CVS tip will never really emit this
record type anyhow...
There are various things left to do: contrib dbsize and oid2name modules
need work, and so does the documentation. Also someone should think about
COMMENT ON TABLESPACE and maybe RENAME TABLESPACE. Also initlocation is
dead, it just doesn't know it yet.
Gavin Sherry and Tom Lane.
of ThisStartUpID and RedoRecPtr into new backends. It's a lot easier just
to make them all grab the values out of shared memory during startup.
This helps to decouple the postmaster from checkpoint execution, which I
need since I'm intending to let the bgwriter do it instead, and it also
fixes a bug in the Win32 port: ThisStartUpID wasn't getting propagated at
all AFAICS. (Doesn't give me a lot of faith in the amount of testing that
port has gotten.)
costing us lots more to maintain than it was worth. On shared tables
it was of exactly zero benefit because we couldn't trust it to be
up to date. On temp tables it sometimes saved an lseek, but not often
enough to be worth getting excited about. And the real problem was that
we forced an lseek on every relcache flush in order to update the field.
So all in all it seems best to lose the complexity.
the next are handled by ReleaseAndReadBuffer rather than separate
ReleaseBuffer and ReadBuffer calls. This cuts the number of acquisitions
of the BufMgrLock by a factor of 2 (possibly more, if an indexscan happens
to pull successive rows from the same heap page). Unfortunately this
doesn't seem enough to get us out of the recently discussed context-switch
storm problem, but it's surely worth doing anyway.
results with tuples as ordinary varlena Datums. This commit does not
in itself do much for us, except eliminate the horrid memory leak
associated with evaluation of whole-row variables. However, it lays the
groundwork for allowing composite types as table columns, and perhaps
some other useful features as well. Per my proposal of a few days ago.
tuptoaster.c --- fields that are compressed in-line are not a reason
to invoke the toaster. Along the way, add a couple more htup.h macros
to eliminate confusing negated tests, and get rid of the already
vestigial TUPLE_TOASTER_ACTIVE symbol.
pointer type when it is not necessary to do so.
For future reference, casting NULL to a pointer type is only necessary
when (a) invoking a function AND either (b) the function has no prototype
OR (c) the function is a varargs function.
some concurrent changes Jan was making to the bufmgr. Here's an
updated version of the patch -- it should apply cleanly to CVS
HEAD and passes the regression tests.
This patch makes the following changes:
- remove the UnlockAndReleaseBuffer() and UnlockAndWriteBuffer()
macros, and replace uses of them with calls to the appropriate
functions.
- remove a bunch of #ifdef BMTRACE code: it is ugly & broken
(i.e. it doesn't compile)
- make BufferReplace() return a bool, not an int
- cleanup some logic in bufmgr.c; should be functionality
equivalent to the previous code, just cleaner now
- remove the BM_PRIVATE flag as it is unused
- improve a few comments, etc.
discussion on pgsql-hackers: in READ COMMITTED mode we just have to force
a QuerySnapshot update in the trigger, but in SERIALIZABLE mode we have
to run the scan under a current snapshot and then complain if any rows
would be updated/deleted that are not visible in the transaction snapshot.
really general fix might be difficult, I believe the only case where
AtCommit_Notify could see an uncommitted tuple is where the other guy
has just unlistened and not yet committed. The best solution seems to
be to just skip updating that tuple, on the assumption that the other
guy does not want to hear about the notification anyway. This is not
perfect --- if the other guy rolls back his unlisten instead of committing,
then he really should have gotten this notify. But to do that, we'd have
to wait to see if he commits or not, or make UNLISTEN hold exclusive lock
on pg_listener until commit. Either of these answers is deadlock-prone,
not to mention horrible for interactive performance. Do it this way
for now. (What happened to that project to do LISTEN/NOTIFY in memory
with no table, anyway?)
