When materialized views were added, psql's \d commands were made to
treat them as a separate object category ... but not everyplace in the
documentation or comments got the memo.
Noted by David Johnston. Back-patch to 9.3 where matviews came in.
Discussion: https://postgr.es/m/CAKFQuwb27M3VXRhHErjCpkWwN9eKThbqWb1=trtoXi9_ejqPXQ@mail.gmail.com
It was unsafe to instruct users to start/stop the server after
pg_upgrade was run but before the standby servers were rsync'ed. The
new instructions avoid this.
RELEASE NOTES: This fix should be mentioned in the minor release notes.
Reported-by: Dmitriy Sarafannikov and Sergey Burladyan
Discussion: https://postgr.es/m/87wp8o506b.fsf@seb.koffice.internal
Backpatch-through: 9.5, where standby server upgrade instructions first appeared
On some platforms, -fpic fails for sufficiently large shared libraries.
We've mostly not hit that boundary yet, but there are some extensions
such as Citus and pglogical where it's becoming a problem. A bit of
research suggests that the penalty for -fPIC is small, in the
single-digit-percentage range --- and there's none at all on popular
platforms such as x86_64. So let's just default to -fPIC everywhere
and provide one less thing for extension developers to worry about.
Per complaint from Christoph Berg. Back-patch to all supported branches.
(I did not bother to touch the recently-removed Makefiles for sco and
unixware in the back branches, though. We'd have no way to test that
it doesn't break anything on those platforms.)
Discussion: https://postgr.es/m/20170529155850.qojdfrwkkqnjb3ap@msg.df7cb.de
pg_resetwal (formerly pg_resetxlog) doesn't insist on finding a matching
version number in pg_control, and that seems like an important thing to
preserve since recovering from corrupt pg_control is a prime reason to
need to run it. However, that means you can try to run it against a
data directory of a different major version, which is at best useless
and at worst disastrous. So as to provide some protection against that
type of pilot error, inspect PG_VERSION at startup and refuse to do
anything if it doesn't match. PG_VERSION is read-only after initdb,
so it's unlikely to get corrupted, and even if it were corrupted it would
be easy to fix by hand.
This hazard has been there all along, so back-patch to all supported
branches.
Michael Paquier, with some kibitzing by me
Discussion: https://postgr.es/m/f4b8eb91-b934-8a0d-b3cc-68f06e2279d1@enterprisedb.com
The cash_div_intX functions applied rint() to the result of the division.
That's not merely useless (because the result is already an integer) but
it causes precision loss for values larger than 2^52 or so, because of
the forced conversion to float8.
On the other hand, the cash_mul_fltX functions neglected to apply rint() to
their multiplication results, thus possibly causing off-by-one outputs.
Per C standard, arithmetic between any integral value and a float value is
performed in float format. Thus, cash_mul_flt4 and cash_div_flt4 produced
answers good to only about six digits, even when the float value is exact.
We can improve matters noticeably by widening the float inputs to double.
(It's tempting to consider using "long double" arithmetic if available,
but that's probably too much of a stretch for a back-patched fix.)
Also, document that cash_div_intX operators truncate rather than round.
Per bug #14663 from Richard Pistole. Back-patch to all supported branches.
Discussion: https://postgr.es/m/22403.1495223615@sss.pgh.pa.us
This is more secure, and saves a redirect since we no longer accept
plain HTTP connections on the website.
References in code comments should probably be updated too, but
that doesn't seem to need back-patching, whereas this does.
Also, in the 9.2 branch, remove suggestion that you can get the
source code via FTP, since that service will be shut down soon.
Daniel Gustafsson, with a few additional changes by me
Discussion: https://postgr.es/m/9A2C89A7-0BB8-41A8-B288-8B7BD09D7D44@yesql.se
This has to be backpatched to all supported releases so release markup
added to HEAD and copied to back branches matches the existing markup.
Reported-by: Peter Eisentraut
Discussion: 2b8a2552-fffa-f7c8-97c5-14db47a87731@2ndquadrant.com
Author: initial patch and sample markup by Peter Eisentraut
Backpatch-through: 9.2
Both views replace the umoptions field with NULL when the user does not
meet qualifications to see it. They used different qualifications, and
pg_user_mappings documented qualifications did not match its implemented
qualifications. Make its documentation and implementation match those
of user_mapping_options. One might argue for stronger qualifications,
but these have long, documented tenure. pg_user_mappings has always
exhibited this problem, so back-patch to 9.2 (all supported versions).
Michael Paquier and Feike Steenbergen. Reviewed by Jeff Janes.
Reported by Andrew Wheelwright.
Security: CVE-2017-7486
Commit 65c3bf19fd3e1f6a591618e92eb4c54d0b217564 moved handling of the,
already then, deprecated requiressl parameter into conninfo_storeval().
The default PGREQUIRESSL environment variable was however lost in the
change resulting in a potentially silent accept of a non-SSL connection
even when set. Its documentation remained. Restore its implementation.
Also amend the documentation to mark PGREQUIRESSL as deprecated for
those not following the link to requiressl. Back-patch to 9.3, where
commit 65c3bf1 first appeared.
Behavior has been more complex when the user provides both deprecated
and non-deprecated settings. Before commit 65c3bf1, libpq operated
according to the first of these found:
requiressl=1
PGREQUIRESSL=1
sslmode=*
PGSSLMODE=*
(Note requiressl=0 didn't override sslmode=*; it would only suppress
PGREQUIRESSL=1 or a previous requiressl=1. PGREQUIRESSL=0 had no effect
whatsoever.) Starting with commit 65c3bf1, libpq ignored PGREQUIRESSL,
and order of precedence changed to this:
last of requiressl=* or sslmode=*
PGSSLMODE=*
Starting now, adopt the following order of precedence:
last of requiressl=* or sslmode=*
PGSSLMODE=*
PGREQUIRESSL=1
This retains the 65c3bf1 behavior for connection strings that contain
both requiressl=* and sslmode=*. It retains the 65c3bf1 change that
either connection string option overrides both environment variables.
For the first time, PGSSLMODE has precedence over PGREQUIRESSL; this
avoids reducing security of "PGREQUIRESSL=1 PGSSLMODE=verify-full"
configurations originating under v9.3 and later.
Daniel Gustafsson
Security: CVE-2017-7485
Some selectivity estimation functions run user-supplied operators over
data obtained from pg_statistic without security checks, which allows
those operators to leak pg_statistic data without having privileges on
the underlying tables. Fix by checking that one of the following is
satisfied: (1) the user has table or column privileges on the table
underlying the pg_statistic data, or (2) the function implementing the
user-supplied operator is leak-proof. If neither is satisfied, planning
will proceed as if there are no statistics available.
At least one of these is satisfied in most cases in practice. The only
situations that are negatively impacted are user-defined or
not-leak-proof operators on a security-barrier view.
Reported-by: Robert Haas <robertmhaas@gmail.com>
Author: Peter Eisentraut <peter_e@gmx.net>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Security: CVE-2017-7484
The reference "That is the topic of the next section." has been
incorrect since the materialized views documentation got inserted
between the section "rules-views" and "rules-update".
Author: Zertrin <postgres_wiki@zertrin.org>
Previously the description about pg_stat_progress_vacuum was in the table
of "Collected Statistics Views" in the doc. But since it repors dynamic
information, i.e., the current progress of VACUUM, its description should be
in the table of "Dynamic Statistics Views".
Back-patch to 9.6 where pg_stat_progress_vacuum was added.
Author: Amit Langote
Discussion: http://postgr.es/m/7ab51b59-8d4d-6193-c60a-b75f222efb12@lab.ntt.co.jp
This backpatches 51e26c9 and 7220c7b, including both documentation
updates clarifying the checkpoints at the beginning of base backups and
the messages in verbose and progress mdoe of pg_basebackup.
Author: Michael Banck
Discussion: https://postgr.es/m/21444.1488142764%40sss.pgh.pa.us
Previously a detailed activity report by VACUUM VERBOSE ANALYZE was
described as an example of VACUUM in docs. But it had been obsolete
for a long time. For example, commit feb4f44d296b88b7f0723f4a4f3945a371276e0b
updated the content of that activity report in 2003, but we had
forgotten to update the example.
So basically we need to update the example. But since no one cared
about the details of VACUUM output and complained about that mistake
for such long time, per discussion on hackers, we decided to get rid
of the detailed activity report from the example and simplify it.
Back-patch to all supported versions.
Reported by Masahiko Sawada, patch by me.
Discussion: https://postgr.es/m/CAD21AoAGA2pB3p-CWmTkxBsbkZS1bcDGBLcYVcvcDxspG_XAfA@mail.gmail.com
Previously the pg_upgrade standby upgrade instructions said not to
execute pgcrypto.sql, but it should have referenced the extension
command "CREATE EXTENSION pgcrypto". This patch makes that doc change.
Reported-by: a private bug report
Backpatch-through: 9.4, where standby instructions were added
These are only supported in to_char, not in the other direction, but the
documentation failed to mention that. Also, describe TZ/tz as printing the
time zone "abbreviation", not "name", because what they print is elsewhere
referred to that way. Per bug #14558.
Also add to the existing rather half-baked description of PROFILE,
which does exactly the same thing, but I think people use it differently.
Discussion: https://postgr.es/m/16461.1487361849@sss.pgh.pa.us
This causes a warning with the old html-docs toolchain, though not with the
new. I had originally supposed that we needed both <indexterm> entries to
get both a primary index entry and a see-also link; but evidently not,
as pointed out by Fabien Coelho.
Discussion: https://postgr.es/m/alpine.DEB.2.20.1702161616060.5445@lancre
Make the typedefs for output plugins consistent with project style;
they were previously not even consistent with each other as to layout
or inclusion of parameter names. Make the documentation look the same,
and fix errors therein (missing and misdescribed parameters).
Back-patch because of the documentation bugs.
The CREATE INDEX CONCURRENTLY bug can only be triggered by row updates,
not inserts, since the problem would arise from an update incorrectly
being made HOT. Noted by Alvaro.
Doing so doesn't seem to be within the purpose of the per user
connection limits, and has particularly unfortunate effects in
conjunction with parallel queries.
Backpatch to 9.6 where parallel queries were introduced.
David Rowley, reviewed by Robert Haas and Albe Laurenz.
The previous --path documentation and --help output were wrong in both
its meaning and the defaults.
Reviewed-by: Michael Paquier
Backpatch-through: 9.6
That was written when we still had "crypt" authentication, and it was
referring to the fact that an older client might support "crypt"
authentication but not "md5". But we haven't supported "crypt" for years.
(As soon as we add a new authentication mechanism that doesn't work with
MD5 hashes, we'll need a similar notice again. But this text as it's worded
now is just wrong.)
Backpatch to all supported versions.
Discussion: https://www.postgresql.org/message-id/9a7263eb-0980-2072-4424-440bb2513dc7@iki.fi
In addition to space accounted for by tuple_len, dead_tuple_len and
free_space, the table_len includes page overhead, the item pointers
table and padding bytes.
Backpatch to live branches.
We had an index entry for "median" attached to the percentile_cont function
entry, which was pretty useless because a person following the link would
never realize that that function was the one they were being hinted to use.
Instead, make the index entry point at the example in syntax-aggregates,
and add a <seealso> link to "percentile".
Also, since that example explicitly claims to be calculating the median,
make it use percentile_cont not percentile_disc. This makes no difference
in terms of the larger goals of that section, but so far as I can find,
nearly everyone thinks that "median" means the continuous not discrete
calculation.
Per gripe from Steven Winfield. Back-patch to 9.4 where we introduced
percentile_cont.
Discussion: https://postgr.es/m/20161223102056.25614.1166@wrigleys.postgresql.org
Documentation for pg_restore said COPY TO does not support row security
when in fact it should say COPY FROM. Fix that.
While at it, make it clear that "COPY FROM" does not allow RLS to be
enabled and INSERT should be used instead. Also that SELECT policies
will apply to COPY TO statements.
Back-patch to 9.5 where RLS first appeared.
Author: Joe Conway
Reviewed-By: Dean Rasheed and Robert Haas
Discussion: https://postgr.es/m/5744FA24.3030008%40joeconway.com
