Two links in the isn module documentation were pointing to tools
which had been moved, resulting in 404 error responses. Update
to the new URLs for the tools. The link to the Sequoia 2000 page
in the history section was no longer working, and since the page
is no longer available online update our link to point at the
paper instead which is on a stable URL.
These links exist in all versions of the documentation so backpatch
to all supported branches.
Author: Daniel Gustafsson <daniel@yesql.se>
Reported-by: charukiewicz@protonmail.com
Discussion: https://postgr.es/m/173679670185.705.8565555804465055355@wrigleys.postgresql.org
Backpatch-through: 13
Slightly faulty logic in the original jsonb code (commit d9134d0a35)
results in an empty top level array sorting less than a json null. We
can't change the sort order now since it would affect btree indexes over
jsonb, so document the anomaly.
Backpatch to all live branches (13 .. 17)
In master, also add a code comment noting the anomaly.
Reported-by: Yan Chengpen
Reviewed-by: Jian He
Discussion: https://postgr.es/m/OSBPR01MB45199DD8DA2D1CECD50518188E272@OSBPR01MB4519.jpnprd01.prod.outlook.com
It looks like the example case was once modified to increase the number
of rows but the EXPLAIN ANALYZE output wasn't updated to reflect that.
Also adjust the text which discusses the index sizes. With the example
table size, the bloom index isn't quite 8 times more space efficient
than the btree indexes.
Discussion: https://postgr.es/m/CAApHDvovx8kQ0=HTt85gFDAwmTJHpCgiSvRmQZ_6u_g-vQYM_w@mail.gmail.com
Backpatch-through: 13, all supported versions
When using a pipeline, a transaction starts from the first command and
is committed with a Sync message or when the pipeline ends.
Functions like IsInTransactionBlock() or PreventInTransactionBlock()
were already able to understand a pipeline as being in a transaction
block, but it was not the case of CheckTransactionBlock(). This
function is called for example to generate a WARNING for SET LOCAL,
complaining that it is used outside of a transaction block.
The current state of the code caused multiple problems, like:
- SET LOCAL executed at any stage of a pipeline issued a WARNING, even
if the command was at least second in line where the pipeline is in a
transaction state.
- LOCK TABLE failed when invoked at any step of a pipeline, even if it
should be able to work within a transaction block.
The pipeline protocol assumes that the first command of a pipeline is
not part of a transaction block, and that any follow-up commands is
considered as within a transaction block.
This commit changes the backend so as an implicit transaction block is
started each time the first Execute message of a pipeline has finished
processing, with this implicit transaction block ended once a sync is
processed. The checks based on XACT_FLAGS_PIPELINING in the routines
checking if we are in a transaction block are not necessary: it is
enough to rely on the existing ones.
Some tests are added to pgbench, that can be backpatched down to v17
when \syncpipeline is involved and down to v14 where \startpipeline and
\endpipeline are available. This is unfortunately limited regarding the
error patterns that can be checked, but it provides coverage for various
pipeline combinations to check if these succeed or fail. These tests
are able to capture the case of SET LOCAL's WARNING. The author has
proposed a different feature to improve the coverage by adding similar
meta-commands to psql where error messages could be checked, something
more useful for the cases where commands cannot be used in transaction
blocks, like REINDEX CONCURRENTLY or VACUUM. This is considered as
future work for v18~.
Author: Anthonin Bonnefoy
Reviewed-by: Jelte Fennema-Nio, Michael Paquier
Discussion: https://postgr.es/m/CAO6_XqrWO8uNBQrSu5r6jh+vTGi5Oiyk4y8yXDORdE2jbzw8xw@mail.gmail.com
Backpatch-through: 13
Per PEP 3114, iterator.next() has been renamed to iterator.__next__(),
and one example in the documentation still used next(). This caused the
example provided to fail the function creation since Python 2 is not
supported anymore since 19252e8ec9.
Author: Erik Wienhold
Discussion: https://postgr.es/m/173209043143.2092749.13692266486972491694@wrigleys.postgresql.org
Backpatch-through: 15
Many process environment variables (e.g. PATH), bypass the containment
expected of a trusted PL. Hence, trusted PLs must not offer features
that achieve setenv(). Otherwise, an attacker having USAGE privilege on
the language often can achieve arbitrary code execution, even if the
attacker lacks a database server operating system user.
To fix PL/Perl, replace trusted PL/Perl %ENV with a tied hash that just
replaces each modification attempt with a warning. Sites that reach
these warnings should evaluate the application-specific implications of
proceeding without the environment modification:
Can the application reasonably proceed without the modification?
If no, switch to plperlu or another approach.
If yes, the application should change the code to stop attempting
environment modifications. If that's too difficult, add "untie
%main::ENV" in any code executed before the warning. For example,
one might add it to the start of the affected function or even to
the plperl.on_plperl_init setting.
In passing, link to Perl's guidance about the Perl features behind the
security posture of PL/Perl.
Back-patch to v12 (all supported versions).
Andrew Dunstan and Noah Misch
Security: CVE-2024-10979
This commit changes libpq so that errors reported by the backend during
the protocol negotiation for SSL and GSS are discarded by the client, as
these may include bytes that could be consumed by the client and write
arbitrary bytes to a client's terminal.
A failure with the SSL negotiation now leads to an error immediately
reported, without a retry on any other methods allowed, like a fallback
to a plaintext connection.
A failure with GSS discards the error message received, and we allow a
fallback as it may be possible that the error is caused by a connection
attempt with a pre-11 server, GSS encryption having been introduced in
v12. This was a problem only with v17 and newer versions; older
versions discard the error message already in this case, assuming a
failure caused by a lack of support for GSS encryption.
Author: Jacob Champion
Reviewed-by: Peter Eisentraut, Heikki Linnakangas, Michael Paquier
Security: CVE-2024-10977
Backpatch-through: 12
There are two functions that can be used in event triggers to get more
details about a rewrite happening on a relation. Both had a limited
documentation:
- pg_event_trigger_table_rewrite_reason() and
pg_event_trigger_table_rewrite_oid() were not mentioned in the main
event trigger section in the paragraph dedicated to the event
table_rewrite.
- pg_event_trigger_table_rewrite_reason() returns an integer which is a
bitmap of the reasons why a rewrite happens. There was no explanation
about the meaning of these values, forcing the reader to look at the
code to find out that these are defined in event_trigger.h.
While on it, let's add a comment in event_trigger.h where the
AT_REWRITE_* are defined, telling to update the documentation when
these values are changed.
Backpatch down to 13 as a consequence of 1ad23335f3, where this area
of the documentation has been heavily reworked.
Author: Greg Sabino Mullane
Discussion: https://postgr.es/m/CAKAnmmL+Z6j-C8dAx1tVrnBmZJu+BSoc68WSg3sR+CVNjBCqbw@mail.gmail.com
Backpatch-through: 13
Disabling enable_indexscan has always also disabled Index Only Scans.
Here we make that more clear in the documentation in an attempt to
prevent future complaints complaining about this expected behavior.
Reported-by: Melanie Plageman
Author: David G. Johnston, David Rowley
Backpatch-through: 12, oldest supported version
Discussion: https://postgr.es/m/CAAKRu_atV=kovgpaLREyG68PB5+ncKvJ2UNoeRetEgyC3Yb5Sw@mail.gmail.com
The present wording about viewing shared_memory_size_in_huge_pages
seems to suggest that the parameter cannot be viewed after startup
at all, whereas the intent is to make it clear that you can't use
"postgres -C" to view this parameter while the server is running.
This commit rephrases this section to remove the ambiguity.
Author: Seino Yuki
Reviewed-by: Michael Paquier, David G. Johnston, Fujii Masao
Discussion: https://postgr.es/m/420584fd274f9ec4f337da55ffb3b790%40oss.nttdata.com
Backpatch-through: 15
The fork name is always separated with the block number by an underscore
in the names of the files generated, but the docs stuck them together
without a separator, which was confusing.
Author: Christoph Berg
Discussion: https://postgr.es/m/ZvxtSLiix9eceMRM@msg.df7cb.de
Backpatch-through: 16
There were unnecessary non-breaking spaces (nbsp, U+00A0, 0xc2a0 in
UTF-8) in the docs. This commit replaces them with ASCII spaces
(0x20).
config.sgml is backpatched through 17.
ref/drop_extension.sgml is backpatched through 13.
Discussion: https://postgr.es/m/20240930.153404.202479334310259810.ishii%40postgresql.org
Reviewed-by: Yugo Nagata, Daniel Gustafsson
Backpatch-through: 17, 13
FYI, during PDF builds, this link type generates a "Unresolved ID
reference found" warning because it is suppressed from the PDF output.
Backpatch-through: 12
Since we introduced unlogged sequences in v15, identity sequences
have defaulted to having the same persistence as their owning table.
However, it is possible to change that with ALTER SEQUENCE, and
pg_dump tries to preserve the logged-ness of sequences when it doesn't
match (as indeed it wouldn't for an unlogged table from before v15).
The fly in the ointment is that ALTER SEQUENCE SET [UN]LOGGED fails
in binary-upgrade mode, because it needs to assign a new relfilenode
which we cannot permit in that mode. Thus, trying to pg_upgrade a
database containing a mismatching identity sequence failed.
To fix, add syntax to ADD/ALTER COLUMN GENERATED AS IDENTITY to allow
the sequence's persistence to be set correctly at creation, and use
that instead of ALTER SEQUENCE SET [UN]LOGGED in pg_dump. (I tried to
make SET [UN]LOGGED work without any pg_dump modifications, but that
seems too fragile to be a desirable answer. This way should be
markedly faster anyhow.)
In passing, document the previously-undocumented SEQUENCE NAME option
that pg_dump also relies on for identity sequences; I see no value
in trying to pretend it doesn't exist.
Per bug #18618 from Anthony Hsu.
Back-patch to v15 where we invented this stuff.
Discussion: https://postgr.es/m/18618-d4eb26d669ed110a@postgresql.org
Historically we've used timezone "PST8PDT", but the recent release
2024b of tzdb changes the definition of that zone in a way that
breaks many test cases concerned with dates before 1970. Although
we've not yet adopted 2024b into our own tree, this is already
problematic for people using --with-system-tzdata if their platform
has already adopted 2024b. To work with both older and newer
versions of tzdb, switch to using "America/Los_Angeles", accepting
the ensuing changes in regression test results.
Back-patch to all supported branches.
Per report and patch from Wolfgang Walther.
Discussion: https://postgr.es/m/0a997455-5aba-4cf2-a354-d26d8bcbfae6@technowledgy.de
This change improves the description of the
restrict_nonsystem_relation_kind parameter in guc_table.c and the
documentation for better clarity.
Backpatch to 12, where this GUC parameter was introduced.
Reviewed-by: Peter Eisentraut
Discussion: https://postgr.es/m/6a96f1af-22b4-4a80-8161-1f26606b9ee2%40eisentraut.org
Backpatch-through: 12
The descriptions for ProcArrayGroupUpdate and XactGroupUpdate claim
that these events mean we are waiting for the group leader "at end
of a parallel operation," but neither pertains to parallel
operations. This commit reverts these descriptions to their
wording before commit 3048898e73, i.e., "end of a parallel
operation" is changed to "transaction end."
Author: Sameer Kumar
Reviewed-by: Amit Kapila
Discussion: https://postgr.es/m/CAGPeHmh6UMrKQHKCmX%2B5vV5TH9P%3DKw9en3k68qEem6J%3DyrZPUA%40mail.gmail.com
Backpatch-through: 13
This section claims we use CRC-32 for WAL records and two-phase
state files, but we've actually used CRC-32C since v9.5 (commit
5028f22f6e). Fix that.
Reviewed-by: Robert Haas
Discussion: https://postgr.es/m/ZrUFpLP-w2zTAHqq%40nathan
Backpatch-through: 12
When pg_dump retrieves the list of database objects and performs the
data dump, there was possibility that objects are replaced with others
of the same name, such as views, and access them. This vulnerability
could result in code execution with superuser privileges during the
pg_dump process.
This issue can arise when dumping data of sequences, foreign
tables (only 13 or later), or tables registered with a WHERE clause in
the extension configuration table.
To address this, pg_dump now utilizes the newly introduced
restrict_nonsystem_relation_kind GUC parameter to restrict the
accesses to non-system views and foreign tables during the dump
process. This new GUC parameter is added to back branches too, but
these changes do not require cluster recreation.
Back-patch to all supported branches.
Reviewed-by: Noah Misch
Security: CVE-2024-7348
Backpatch-through: 12
Prior to this commit, the docs for enable_partitionwise_aggregate and
enable_partitionwise_join mentioned the additional overheads enabling
these causes for the query planner, but they mentioned nothing about the
possible surge in work_mem-consuming executor nodes that could end up in
the final plan. Dimitrios reported the OOM killer intervened on his
query as a result of using enable_partitionwise_aggregate=on.
Here we adjust the docs to mention the possible increase in the number of
work_mem-consuming executor nodes that can appear in the final plan as a
result of enabling these GUCs.
Reported-by: Dimitrios Apostolou
Reviewed-by: Ashutosh Bapat
Discussion: https://postgr.es/m/3603c380-d094-136e-e333-610914fb3e80%40gmx.net
Discussion: https://postgr.es/m/CAApHDvoZ0_yqwPFEpb6h261L76BUpmh5GxBQq0LeRzQ5Jh3zzg@mail.gmail.com
Backpatch-through: 12, oldest supported version
