With Python 3.10, configure spits out warnings about the module
distutils.sysconfig being deprecated and scheduled for removal in
Python 3.12. Change the uses in configure to use the module sysconfig
instead. The logic stays largely the same, although we have to
rely on INCLUDEPY instead of the deprecated get_python_inc function.
Note that sysconfig exists since Python 2.7, so this moves the
minimum required version up from Python 2.6 (or 2.4, before v13).
Also, sysconfig didn't exist in Python 3.1, so the minimum 3.x
version is now 3.2.
Back-patch of commit bd233bdd8 into all supported branches.
In v10, this also includes back-patching v11's beff4bb9c, primarily
because this opinion is clearly out-of-date:
While at it, get rid of the code's assumption that both the major and
minor numbers contain exactly one digit. That will foreseeably be
broken by Python 3.10 in perhaps four or five years. That's far enough
out that we probably don't need to back-patch this.
Peter Eisentraut, Tom Lane, Andres Freund
Discussion: https://postgr.es/m/c74add3c-09c4-a9dd-1a03-a846e5b2fc52@enterprisedb.com
This is an extraction of the user-visible changes done in 410aa24,
including all the relevant documentation parts.
Author: Justin Pryzby
Discussion: https://postgr.es/m/20220124030001.GQ23027@telsasoft.com
Backpatch-through: 10
I had a brain fade in commit d32899157, and used 2:30AM as the
example timestamp for both spring-forward and fall-back cases.
But it's not actually ambiguous at all in the fall-back case,
because that transition is from 2AM to 1AM under USA rules.
Fix the example to use 1:30AM, which *is* ambiguous.
Noted while answering a question from Aleksander Alekseev.
Back-patch to all supported branches.
Discussion: https://postgr.es/m/2191355.1641828552@sss.pgh.pa.us
The link used in the documentation is dead, and the only options to have
an access to this part of the SQL specification are not free. Like any
other books referred, just remove the link to keep some neutrality but
keep its reference.
Reported-by: Erik Rijkers
Discussion: https://postgr.es/m/989abd7d-af30-ab52-1201-bf0b4f33b872@xs4all.nl
Backpatch-through: 12
catalog/pg_class.h was stating that REPLICA_IDENTITY_INDEX with a
dropped index is equivalent to REPLICA_IDENTITY_DEFAULT. The code tells
a different story, as it is equivalent to REPLICA_IDENTITY_NOTHING.
The behavior exists since the introduction of replica identities, and
fe7fd4e even added tests for this case but I somewhat forgot to fix this
comment.
While on it, this commit reorganizes the documentation about replica
identities on the ALTER TABLE page, and a note is added about the case
of dropped indexes with REPLICA_IDENTITY_INDEX.
Author: Michael Paquier, Wei Wang
Reviewed-by: Euler Taveira
Discussion: https://postgr.es/m/OS3PR01MB6275464AD0A681A0793F56879E759@OS3PR01MB6275.jpnprd01.prod.outlook.com
Backpatch-through: 10
edc2332 has introduced in vcregress.pl some control on the environment
variables LZ4, TAR and GZIP_PROGRAM to allow any TAP tests to be able
use those commands. This makes the settings more consistent with
src/Makefile.global.in, as the same default gets used for Make and MSVC
builds.
Each parameter can be changed in buildenv.pl, but as a default gets
assigned after loading buldenv.pl, it is not possible to unset any of
these, and using an empty value would not work with "||=" either. As
some environments may not have a compatible command in their PATH (tar
coming from MinGW is an issue, for one), this could break tests without
an exit path to bypass any failing test. This commit changes things so
as the default values for LZ4, TAR and GZIP_PROGRAM are assigned before
loading buildenv.pl, not after. This way, we keep the same amount of
compatibility as a GNU build with the same defaults, and it becomes
possible to unset any of those values.
While on it, this adds some documentation about those three variables in
the section dedicated to the TAP tests for MSVC.
Per discussion with Andrew Dunstan.
Discussion: https://postgr.es/m/YbGYe483803il3X7@paquier.xyz
Backpatch-through: 10
In commit 791090bd7, I made an effort to fill in documentation
for all geometric operators listed in pg_operator. However,
it now appears that at least some of the omissions may have been
intentional, because some of those operator entries point at
unimplemented stub functions. Remove those from the docs again.
(In HEAD, poly_distance stays, because c5c192d7b just added an
implementation for it.)
Per complaint from Anton Voloshin.
Discussion: https://postgr.es/m/3426566.1638832718@sss.pgh.pa.us
List types numeric and timestamptz, which don't seem to have ever been
included here. Restore bigint, which was no-doubt-accidentally deleted
in v12. Fix some errors, or at least obsolete usages (nobody declares
float arguments as "float8*" anymore, even though they might be that
under the hood). Re-alphabetize. Remove the seeming claim that this
is a complete list of built-in types.
Per question from Oskar Stenberg.
Discussion: https://postgr.es/m/HE1PR03MB2971DE2527ECE1E99D6C19A8F96E9@HE1PR03MB2971.eurprd03.prod.outlook.com
ssl_crl_file and ssl_crl_dir are both used to for client certificate
revocation, not server certificates. The description for the params
could be easily misread to mean the opposite however, as evidenced
by the bugreport leading to this fix. Similarly, expand sslcrl and
and sslcrldir to explicitly mention server certificates. While there
also mention sslcrldir where previously only sslcrl was discussed.
Backpatch down to v10, with the CRL dir fixes down to 14 where they
were introduced.
Author: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Discussion: https://postgr.es/m/20211202.135441.590555657708629486.horikyota.ntt@gmail.com
Discussion: https://postgr.es/m/CABWY_HCBUCjY1EJHrEGePGEaSZ5b29apgTohCyygtsqe_ySYng@mail.gmail.com
Backpatch-through: 10
ATTACHing a table into a partition tree whose root is published using a
publication with publish_via_partition_root set to true does not result in
the table's existing contents being replicated. This happens because
subscriber doesn't consider replicating the newly attached partition as
the root table is already in a 'ready' state.
This behavior was introduced in PG13 (83fd4532a7) where we allowed to
publish partition changes via ancestors.
We can consider fixing this limitation in the future.
Author: Amit Langote
Reviewed-by: Hou Zhijie, Amit Kapila
Backpatch-through: 13
Discussion: https://postgr.es/m/OS0PR01MB5716E97F00732B52DC2BBC2594989@OS0PR01MB5716.jpnprd01.prod.outlook.com
Remove the confusing use of ORDER BY in an example materialized
view. It adds nothing to the example, but might encourage
people to follow bad practice. Clarify REFRESH MATERIALIZED
VIEW's note about whether view ordering is retained (it isn't).
Maciek Sakrejda
Discussion: https://postgr.es/m/CAOtHd0D-OvrUU0C=4hX28p4BaSE1XL78BAQ0VcDaLLt8tdUzsg@mail.gmail.com
Clarify that the results of nextval and setval are not guaranteed
persistent until the calling transaction commits. Some people
seem to have drawn the opposite conclusion from the statement that
these functions are never rolled back, so re-word to avoid saying
it quite that way.
Discussion: https://postgr.es/m/CAKU4AWohO=NfM-4KiZWvdc+z3c1C9FrUBR6xnReFJ6sfy0i=Lw@mail.gmail.com
Documentation and any code paths related to VS are updated to keep the
whole consistent. Similarly to 2017 and 2019, the version of VS and the
version of nmake that we use to determine which code paths to use for
the build are still inconsistent in their own way.
Backpatch down to 10, so as buildfarm members are able to use this new
version of Visual Studio on all the stable branches supported.
Author: Hans Buschmann
Discussion: https://postgr.es/m/1633101364685.39218@nidsa.net
Backpatch-through: 10
The "See also" section on the reference page for CREATE PUBLICATION
didn't match the cross references on CREATE SUBSCRIPTION and their
ALTER counterparts. Fixed by adding an xref to the CREATE and ALTER
SUBSCRIPTION pages. Backpatch down to v10 where CREATE PUBLICATION
was introduced.
Author: Peter Smith <smithpb2250@gmail.com>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Discussion: https://postgr.es/m/CAHut+PvGWd3-Ktn96c-z6uq-8TGVVP=TPOkEovkEfntoo2mRhw@mail.gmail.com
Backpatch-through: 10
protocol.sgml documented the layout for Type messages, but completely
dropped the ball otherwise, failing to explain what they are, when
they are sent, or what they're good for. While at it, do a little
copy-editing on the description of Relation messages.
In passing, adjust the comment for apply_handle_type() to make it
clearer that we choose not to do anything when receiving a Type
message, not that we think it has no use whatsoever.
Per question from Stefen Hillman.
Discussion: https://postgr.es/m/CAPgW8pMknK5pup6=T4a_UG=Cz80Rgp=KONqJmTdHfaZb0RvnFg@mail.gmail.com
libpq collects up to a bufferload of data whenever it reads data from
the socket. When SSL or GSS encryption is requested during startup,
any additional data received with the server's yes-or-no reply
remained in the buffer, and would be treated as already-decrypted data
once the encryption handshake completed. Thus, a man-in-the-middle
with the ability to inject data into the TCP connection could stuff
some cleartext data into the start of a supposedly encryption-protected
database session.
This could probably be abused to inject faked responses to the
client's first few queries, although other details of libpq's behavior
make that harder than it sounds. A different line of attack is to
exfiltrate the client's password, or other sensitive data that might
be sent early in the session. That has been shown to be possible with
a server vulnerable to CVE-2021-23214.
To fix, throw a protocol-violation error if the internal buffer
is not empty after the encryption handshake.
Our thanks to Jacob Champion for reporting this problem.
Security: CVE-2021-23222
As usual, the release notes for other branches will be made by cutting
these down, but put them up for community review first.
Also as usual for a .1 release, there are some entries here that
are not really relevant for v14 because they already appeared in 14.0.
Those'll be removed later.
This reverts commit 671eb8f34404d24c8f16ae40e94becb38afd93bb. The removed
wait events are used by some extensions and removal of these would force a
recompile of those extensions. We don't want that for released branches.
Discussion: https://postgr.es/m/E1mdOBY-0005j2-QL@gemulon.postgresql.org
The documentation was imprecise about the starting LSN used for WAL
streaming if nothing can be found in the local archive directory
defined with the pg_receivewal command, so be more talkative on this
matter.
Extracted from a larger patch by the same author.
Author: Ronan Dunklau, Michael Paquier
Discussion: https://postgr.es/m/18708360.4lzOvYHigE@aivenronan
Backpatch-through: 10
Avoid calling contrib/amcheck functions with relations that are
unsuitable for checking. Specifically, don't attempt verification of
temporary relations, or indexes whose pg_index entry indicates that the
index is invalid, or not ready.
These relations are not supported by any of the contrib/amcheck
functions, for reasons that are pretty fundamental. For example, the
implementation of REINDEX CONCURRENTLY can add its own "transient"
pg_index entries, which has rather unclear implications for the B-Tree
verification functions, at least in the general case -- so they just
treat it as an error. It falls to the amcheck caller (in this case
pg_amcheck) to deal with the situation at a higher level.
pg_amcheck now simply treats these conditions as additional "visibility
concerns" when it queries system catalogs. This is a little arbitrary.
It seems to have the least problems among any of the available
alternatives.
Author: Mark Dilger <mark.dilger@enterprisedb.com>
Reported-By: Alexander Lakhin <exclusion@gmail.com>
Reviewed-By: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Robert Haas <robertmhaas@gmail.com>
Bug: #17212
Discussion: https://postgr.es/m/17212-34dd4a1d6bba98bf@postgresql.org
Backpatch: 14-, where pg_amcheck was introduced.
queries.sgml failed to mention the rather important point that
INTERSECT binds more tightly than UNION or EXCEPT. I thought
it could also use more discussion of the role of parentheses
in these constructs.
Per gripe from Christopher Painter-Wakefield.
Discussion: https://postgr.es/m/163338891727.12510.3939775743980651160@wrigleys.postgresql.org
The old URL was HTTP 404 and the git link didn't build. Also update two
other ICU links. If we ever get a good link we will add it back.
Reported-by: Anton Voloshin
Author: Laurenz Albe
Backpatch-through: 10
gist.sgml and xindex.sgml hadn't been fully updated for the
addition of a sortsupport support function (commit 16fa9b2b3).
xindex.sgml also missed that the compress and decompress support
functions are optional, an apparently far older oversight.
In passing, fix gratuitous inconsistencies in wording and
capitalization.
Noted by E. Rogov. Back-patch to v14; the residual issues
before that aren't significant enough to bother with.
Discussion: https://postgr.es/m/163335322905.12519.5711557029494638051@wrigleys.postgresql.org
Prior to v14, we insisted that the query in RETURN QUERY be of a type
that returns tuples. (For instance, INSERT RETURNING was allowed,
but not plain INSERT.) That happened indirectly because we opened a
cursor for the query, so spi.c checked SPI_is_cursor_plan(). As a
consequence, the error message wasn't terribly on-point, but at least
it was there.
Commit 2f48ede08 lost this detail. Instead, plain RETURN QUERY
insisted that the query be a SELECT (by checking for SPI_OK_SELECT)
while RETURN QUERY EXECUTE failed to check the query type at all.
Neither of these changes was intended.
The only convenient place to check this in the EXECUTE case is inside
_SPI_execute_plan, because we haven't done parse analysis until then.
So we need to pass down a flag saying whether to enforce that the
query returns tuples. Fortunately, we can squeeze another boolean
into struct SPIExecuteOptions without an ABI break, since there's
padding space there. (It's unlikely that any extensions would
already be using this new struct, but preserving ABI in v14 seems
like a smart idea anyway.)
Within spi.c, it seemed like _SPI_execute_plan's parameter list
was already ridiculously long, and I didn't want to make it longer.
So I thought of passing SPIExecuteOptions down as-is, allowing that
parameter list to become much shorter. This makes the patch a bit
more invasive than it might otherwise be, but it's all internal to
spi.c, so that seems fine.
Per report from Marc Bachmann. Back-patch to v14 where the
faulty code came in.
Discussion: https://postgr.es/m/1F2F75F0-27DF-406F-848D-8B50C7EEF06A@gmail.com
Commit 9868167500 added pg_stat_replication_slots view to monitor
ReorderBuffer stats but mistakenly added it under
"Dynamic Statistics Views" section in the docs whereas it belongs to
"Collected Statistics Views" section.
Author: Amit Kapila
Reviewed-by: Masahiko Sawada
Backpatch-through: 14, where it was introduced
Discussion: https://postgr.es/m/CAA4eK1Kb5ur=OC-G4cAsqPOjoVe+S8LNw1WmUY8Owasjk8o5WQ@mail.gmail.com
Be a little more vocal about the risks of remote collations not
matching local ones. Actually fixing these risks seems hard,
and I've given up on the idea that it might be back-patchable.
So the best we can do for the back branches is add documentation.
Per discussion of bug #16583 from Jiří Fejfar.
Discussion: https://postgr.es/m/2438715.1632510693@sss.pgh.pa.us
