pg_constraint before searching pg_trigger. This allows saner handling of
corner cases; in particular we now say "constraint is not deferrable"
rather than "constraint does not exist" when the command is applied to
a constraint that's inherently non-deferrable. Per a gripe several months
ago from hubert depesz lubaczewski.
To make this work without breaking user-defined constraint triggers,
we have to add entries for them to pg_constraint. However, in return
we can remove the pgconstrname column from pg_constraint, which represents
a fairly sizable space savings. I also replaced the tgisconstraint column
with tgisinternal; the old meaning of tgisconstraint can now be had by
testing for nonzero tgconstraint, while there is no other way to get
the old meaning of nonzero tgconstraint, namely that the trigger was
internally generated rather than being user-created.
In passing, fix an old misstatement in the docs and comments, namely that
pg_trigger.tgdeferrable is exactly redundant with pg_constraint.condeferrable.
Actually, we mark RI action triggers as nondeferrable even when they belong to
a nominally deferrable FK constraint. The SET CONSTRAINTS code now relies on
that instead of hard-coding a list of exception OIDs.
Conflict reason is passed through directly to the backend, so we can
take decisions about the effect of the conflict based upon the local
state. No specific changes, as yet, though this prepares for later work.
CancelVirtualTransaction() sends signals while holding ProcArrayLock.
Introduce errdetail_abort() to give message detail explaining that the
abort was caused by conflict processing. Remove CONFLICT_MODE states
in favour of using PROCSIG_RECOVERY_CONFLICT states directly, for clarity.
parse analysis phase, rather than at execution time. This makes parameter
handling work the same as it does in ordinary plannable queries, and in
particular fixes the incompatibility that Pavel pointed out with plpgsql's
new handling of variable references. plancache.c gets a little bit
grottier, but the alternatives seem worse.
This includes two new kinds of postmaster processes, walsenders and
walreceiver. Walreceiver is responsible for connecting to the primary server
and streaming WAL to disk, while walsender runs in the primary server and
streams WAL from disk to the client.
Documentation still needs work, but the basics are there. We will probably
pull the replication section to a new chapter later on, as well as the
sections describing file-based replication. But let's do that as a separate
patch, so that it's easier to see what has been added/changed. This patch
also adds a new section to the chapter about FE/BE protocol, documenting the
protocol used by walsender/walreceivxer.
Bump catalog version because of two new functions,
pg_last_xlog_receive_location() and pg_last_xlog_replay_location(), for
monitoring the progress of replication.
Fujii Masao, with additional hacking by me
It is absolutely not okay to throw an ereport(ERROR) in any random place in
the code just because DoingCommandRead is set; interrupting, say, OpenSSL
in the midst of its activities is guaranteed to result in heartache.
Instead of that, undo the original optimizations that threw away
QueryCancelPending anytime we were starting or finishing a command read, and
instead discard the cancel request within ProcessInterrupts if we find that
there is no HS reason for forcing a cancel and we are DoingCommandRead.
In passing, may I once again condemn the practice of changing the code
and not fixing the adjacent comment that you just turned into a lie?
This patch only supports seq_page_cost and random_page_cost as parameters,
but it provides the infrastructure to scalably support many more.
In particular, we may want to add support for effective_io_concurrency,
but I'm leaving that as future work for now.
Thanks to Tom Lane for design help and Alvaro Herrera for the review.
Enabled by recovery_connections = on (default) and forcing archive recovery using a recovery.conf. Recovery processing now emulates the original transactions as they are replayed, providing full locking and MVCC behaviour for read only queries. Recovery must enter consistent state before connections are allowed, so there is a delay, typically short, before connections succeed. Replay of recovering transactions can conflict and in some cases deadlock with queries during recovery; these result in query cancellation after max_standby_delay seconds have expired. Infrastructure changes have minor effects on normal running, though introduce four new types of WAL record.
New test mode "make standbycheck" allows regression tests of static command behaviour on a standby server while in recovery. Typical and extreme dynamic behaviours have been checked via code inspection and manual testing. Few port specific behaviours have been utilised, though primary testing has been on Linux only so far.
This commit is the basic patch. Additional changes will follow in this release to enhance some aspects of behaviour, notably improved handling of conflicts, deadlock detection and query cancellation. Changes to VACUUM FULL are also required.
Simon Riggs, with significant and lengthy review by Heikki Linnakangas, including streamlined redesign of snapshot creation and two-phase commit.
Important contributions from Florian Pflug, Mark Kirkwood, Merlin Moncure, Greg Stark, Gianni Ciolli, Gabriele Bartolini, Hannu Krosing, Robert Haas, Tatsuo Ishii, Hiroyuki Yamada plus support and feedback from many other community members.
This was possibly linked to a deadlock-like situation in glibc syslog code
invoked by the ereport call in quickdie(). In any case, a signal handler
should not unblock its own signal unless there is a specific reason to.
This patch also removes buffer-usage statistics from the track_counts
output, since this (or the global server statistics) is deemed to be a better
interface to this information.
Itagaki Takahiro, reviewed by Euler Taveira de Oliveira.
an allegedly immutable index function. It was previously recognized that
we had to prevent such a function from executing SET/RESET ROLE/SESSION
AUTHORIZATION, or it could trivially obtain the privileges of the session
user. However, since there is in general no privilege checking for changes
of session-local state, it is also possible for such a function to change
settings in a way that might subvert later operations in the same session.
Examples include changing search_path to cause an unexpected function to
be called, or replacing an existing prepared statement with another one
that will execute a function of the attacker's choosing.
The present patch secures VACUUM, ANALYZE, and CREATE INDEX/REINDEX against
these threats, which are the same places previously deemed to need protection
against the SET ROLE issue. GUC changes are still allowed, since there are
many useful cases for that, but we prevent security problems by forcing a
rollback of any GUC change after completing the operation. Other cases are
handled by throwing an error if any change is attempted; these include temp
table creation, closing a cursor, and creating or deleting a prepared
statement. (In 7.4, the infrastructure to roll back GUC changes doesn't
exist, so we settle for rejecting changes of "search_path" in these contexts.)
Original report and patch by Gurjeet Singh, additional analysis by
Tom Lane.
Security: CVE-2009-4136
support any indexable commutative operator, not just equality. Two rows
violate the exclusion constraint if "row1.col OP row2.col" is TRUE for
each of the columns in the constraint.
Jeff Davis, reviewed by Robert Haas
checked to determine whether the trigger should be fired.
For BEFORE triggers this is mostly a matter of spec compliance; but for AFTER
triggers it can provide a noticeable performance improvement, since queuing of
a deferred trigger event and re-fetching of the row(s) at end of statement can
be short-circuited if the trigger does not need to be fired.
Takahiro Itagaki, reviewed by KaiGai Kohei.
adopted for EXPLAIN. This will allow additional options to be implemented
in future without having to make them fully-reserved keywords. The old syntax
remains available for existing options, however.
Itagaki Takahiro
As proof of concept, modify plpgsql to use the hooks. plpgsql is still
inserting $n symbols textually, but the "back end" of the parsing process now
goes through the ParamRef hook instead of using a fixed parameter-type array,
and then execution only fetches actually-referenced parameters, using a hook
added to ParamListInfo.
Although there's a lot left to be done in plpgsql, this already cures the
"if (TG_OP = 'INSERT' and NEW.foo ...)" problem, as illustrated by the
changed regression test.
a lot of strange behaviors that occurred in join cases. We now identify the
"current" row for every joined relation in UPDATE, DELETE, and SELECT FOR
UPDATE/SHARE queries. If an EvalPlanQual recheck is necessary, we jam the
appropriate row into each scan node in the rechecking plan, forcing it to emit
only that one row. The former behavior could rescan the whole of each joined
relation for each recheck, which was terrible for performance, and what's much
worse could result in duplicated output tuples.
Also, the original implementation of EvalPlanQual could not re-use the recheck
execution tree --- it had to go through a full executor init and shutdown for
every row to be tested. To avoid this overhead, I've associated a special
runtime Param with each LockRows or ModifyTable plan node, and arranged to
make every scan node below such a node depend on that Param. Thus, by
signaling a change in that Param, the EPQ machinery can just rescan the
already-built test plan.
This patch also adds a prohibition on set-returning functions in the
targetlist of SELECT FOR UPDATE/SHARE. This is needed to avoid the
duplicate-output-tuple problem. It seems fairly reasonable since the
other restrictions on SELECT FOR UPDATE are meant to ensure that there
is a unique correspondence between source tuples and result tuples,
which an output SRF destroys as much as anything else does.
They are now handled by a new plan node type called ModifyTable, which is
placed at the top of the plan tree. In itself this change doesn't do much,
except perhaps make the handling of RETURNING lists and inherited UPDATEs a
tad less klugy. But it is necessary preparation for the intended extension of
allowing RETURNING queries inside WITH.
Marko Tiikkaja
friends). This code has all been ifdef'd out for many years, and doesn't
seem to have any prospect of becoming any more useful in the future.
EXPLAIN ANALYZE is what people use in practice, and I think if we did want
process-wide counters we'd be more likely to put in dtrace events for that
than try to resurrect this code. Get rid of it so as to have one less detail
to worry about while refactoring execMain.c.
the privileges that will be applied to subsequently-created objects.
Such adjustments are always per owning role, and can be restricted to objects
created in particular schemas too. A notable benefit is that users can
override the traditional default privilege settings, eg, the PUBLIC EXECUTE
privilege traditionally granted by default for functions.
Petr Jelinek
to create a function for it.
Procedural languages now have an additional entry point, namely a function
to execute an inline code block. This seemed a better design than trying
to hide the transient-ness of the code from the PL. As of this patch, only
plpgsql has an inline handler, but probably people will soon write handlers
for the other standard PLs.
In passing, remove the long-dead LANCOMPILER option of CREATE LANGUAGE.
Petr Jelinek
Recent commits have removed the various uses it was supporting. It was a
performance bottleneck, according to bug report #4919 by Lauris Ulmanis; seems
it slowed down user creation after a billion users.
to fix the problem that SetClientEncoding needs to be done before
InitializeClientEncoding, as reported by Zdenek Kotala. We get at least
the small consolation of being able to remove the bizarre API detail that
had InitPostgres returning whether user is a superuser.
(That flat file is now completely useless, but removal will come later.)
To do this, postpone client authentication into the startup transaction
that's run by InitPostgres. We still collect the startup packet and do
SSL initialization (if needed) at the same time we did before. The
AuthenticationTimeout is applied separately to startup packet collection
and the actual authentication cycle. (This is a bit annoying, since it
means a couple extra syscalls; but the signal handling requirements inside
and outside a transaction are sufficiently different that it seems best
to treat the timeouts as completely independent.)
A small security disadvantage is that if the given database name is invalid,
this will be reported to the client before any authentication happens.
We could work around that by connecting to database "postgres" instead,
but consensus seems to be that it's not worth introducing such surprising
behavior.
Processing of all command-line switches and GUC options received from the
client is now postponed until after authentication. This means that
PostAuthDelay is much less useful than it used to be --- if you need to
investigate problems during InitPostgres you'll have to set PreAuthDelay
instead. However, allowing an unauthenticated user to set any GUC options
whatever seems a bit too risky, so we'll live with that.
PostgresMain switch. In point of fact, FrontendProtocol is already set
in a backend process, since ProcessStartupPacket() is executed inside
the backend --- it hasn't been run by the postmaster for many years.
And if it were, we'd still certainly want FrontendProtocol to be set before
we get as far as PostgresMain, so that startup errors get reported in the
right protocol.
-v might have some future use in standalone backends, so I didn't go so
far as to remove the switch outright.
Also, initialize FrontendProtocol to 0 not PG_PROTOCOL_LATEST. The only
likely result of presetting it like that is to mask failure-to-set-it
mistakes.
This patch gets us out from under the Unix limitation of two user-defined
signal types. We already had done something similar for signals directed to
the postmaster process; this adds multiplexing for signals directed to
backends and auxiliary processes (so long as they're connected to shared
memory).
As proof of concept, replace the former usage of SIGUSR1 and SIGUSR2
for backends with use of the multiplexing mechanism. There are still some
hard-wired definitions of SIGUSR1 and SIGUSR2 for other process types,
but getting rid of those doesn't seem interesting at the moment.
Fujii Masao
The current implementation fires an AFTER ROW trigger for each tuple that
looks like it might be non-unique according to the index contents at the
time of insertion. This works well as long as there aren't many conflicts,
but won't scale to massive unique-key reassignments. Improving that case
is a TODO item.
Dean Rasheed
conindid is the index supporting a constraint. We can use this not only for
unique/primary-key constraints, but also foreign-key constraints, which
depend on the unique index that constrains the referenced columns.
tgconstrindid is just copied from the constraint's conindid field, or is
zero for triggers not associated with constraints.
This is mainly intended as infrastructure for upcoming patches, but it has
some virtue in itself, since it exposes a relationship that you formerly
had to grovel in pg_depend to determine. I simplified one information_schema
view accordingly. (There is a pg_dump query that could also use conindid,
but I left it alone because it wasn't clear it'd get any faster.)
The original syntax made it difficult to add options without making them
into reserved words. This change parenthesizes the options to avoid that
problem, and makes provision for an explicit (and perhaps non-Boolean)
value for each option. The original syntax is still supported, but only
for the two original options ANALYZE and VERBOSE.
As a test case, add a COSTS option that can suppress the planner cost
estimates. This may be useful for including EXPLAIN output in the regression
tests, which are otherwise unable to cope with cross-platform variations in
cost estimates.
Robert Haas
This alters various incidental uses of C++ key words to use other similar
identifiers, so that a C++ compiler won't choke outright. You still
(probably) need extern "C" { }; around the inclusion of backend headers.
based on a patch by Kurt Harriman <harriman@acm.org>
Also add a script cpluspluscheck to check for C++ compatibility in the
future. As of right now, this passes without error for me.
copies?) to ensure they really don't run proc_exit/shmem_exit callbacks,
as was intended. I broke this behavior recently by installing atexit
callbacks without thinking about the one case where we truly don't want
to run those callback functions. Noted in an example from Dave Page.
a toast table to be built, even if the sum-of-column-widths calculation
indicates one isn't needed. This is needed by pg_migrator because if the
old table has a toast table, we have to migrate over the toast table since
it might contain some live data, even though subsequent column drops could
mean that no recently-added rows could require toasting.
mode while callers hold pointers to in-memory tuples. I reported this for
the case of nodeWindowAgg's primary scan tuple, but inspection of the code
shows that all of the calls in nodeWindowAgg and nodeCtescan are at risk.
For the moment, fix it with a rather brute-force approach of copying
whenever one of the at-risk callers requests a tuple. Later we might
think of some sort of reference-count approach to reduce tuple copying.
qualifier, and add support for this in pg_dump.
This allows TOAST tables to have user-defined fillfactor, and will also
enable us to move the autovacuum parameters to reloptions without taking
away the possibility of setting values for TOAST tables.
practically free given prior 8.4 changes in plancache and portal management,
and it makes it a lot easier for ExecutorStart/Run/End hooks to get at the
query text. Extracted from Itagaki Takahiro's pg_stat_statements patch,
with minor editorialization.
is available during datatype input in Bind message processing. I put the
PopActiveSnapshot() or equivalent just before PortalDefineQuery, which is
an unsafe spot for it (in 8.3 and later) because we are carrying a plancache
refcount that hasn't yet been assigned to the portal. Any error thrown there
would result in leaking the refcount. It's not exactly likely that
PopActiveSnapshot would throw an elog, perhaps, but it could happen.
Reorder the code and add another comment warning not to do that.
This doesn't do any remote or external things yet, but it gives modules
like plproxy and dblink a standardized and future-proof system for
managing their connection information.
Martin Pihlak and Peter Eisentraut
