division and modulo functions, to avoid problems on OS X (which fails to
trap 0 divide at all) and Windows (which traps it in some bizarre
nonstandard fashion). Standardize on 'division by zero' as the one true
spelling of this error message. Add regression tests as suggested by
Neil Conway.
utility statement (DeclareCursorStmt) with a SELECT query dangling from
it, rather than a SELECT query with a few unusual fields in it. Add
code to determine whether a planned query can safely be run backwards.
If DECLARE CURSOR specifies SCROLL, ensure that the plan can be run
backwards by adding a Materialize plan node if it can't. Without SCROLL,
you get an error if you try to fetch backwards from a cursor that can't
handle it. (There is still some discussion about what the exact
behavior should be, but this is necessary infrastructure in any case.)
Along the way, make EXPLAIN DECLARE CURSOR work.
entire contents of the subplan into the tuplestore before we can return
any tuples. Instead, the tuplestore holds what we've already read, and
we fetch additional rows from the subplan as needed. Random access to
the previously-read rows works with the tuplestore, and doesn't affect
the state of the partially-read subplan. This is a step towards fixing
the problems with cursors over complex queries --- we don't want to
stick in Materialize nodes if they'll prevent quick startup for a cursor.
Adjustable threshold is gone in favor of keeping track of total requested
page storage and doling out proportional fractions to each relation
(with a minimum amount per relation, and some quantization of the results
to avoid thrashing with small changes in page counts). Provide special-
case code for indexes so as not to waste space storing useless page
free space counts. Restructure internal data storage to be a flat array
instead of list-of-chunks; this may cost a little more work in data
copying when reorganizing, but allows binary search to be used during
lookup_fsm_page_entry().
is assumed to be in local time, not GMT. This improves consistency with
other operations, which all assume local timezone when it matters. Per
bug #897.
setting timezone-related variables during transaction start. They were
not used anyway in platforms that HAVE_TM_ZONE or HAVE_INT_TIMEZONE,
which it appears is *all* the platforms we are currently supporting.
For platforms that have neither, we now only support UTC or numeric-
offset-from-UTC timezones.
answer when SET TIMEZONE has been done since the start of the current
transaction. Per bug report from Robert Haas.
I plan some futher cleanup in HEAD, but this is a low-risk patch for
the immediate issue in 7.3.
correctly. See following thread for more details.
Subject: [HACKERS] client_encoding directive is ignored in postgresql.conf
From: Tatsuo Ishii <t-ishii@sra.co.jp>
Date: Wed, 29 Jan 2003 22:24:04 +0900 (JST)
RelOid_pg_class, and transaction locks XactLockTableId. RelId is renamed
to objId.
- LockObject() and UnlockObject() functions created, and their use
sprinkled throughout the code to do descent locking for domains and
types. They accept lock modes AccessShare and AccessExclusive, as we
only really need a 'read' and 'write' lock at the moment. Most locking
cases are held until the end of the transaction.
This fixes the cases Tom mentioned earlier in regards to locking with
Domains. If the patch is good, I'll work on cleaning up issues with
other database objects that have this problem (most of them).
Rod Taylor
functions which limited the maximum date for a timestamp to AD 1465001.
The new limit is AD 5874897.
The files affected are:
doc/src/sgml/datatype.sgml:
Documentation change due to patch. Included is a notice about
the reduced range when using an eight-byte integer for timestamps.
src/backend/utils/adt/datetime.c:
Replacement functions for j2date() and date2j() functions.
src/include/utils/datetime.h:
Corrected a bug with the limit on the earliest possible date,
Nov 23,-4713 has a Julian day count of -1. The earliest possible
date should be Nov 24, -4713 with a day count of 0.
src/test/regress/expected/horology-no-DST-before-1970.out:
src/test/regress/expected/horology-solaris-1947.out:
src/test/regress/expected/horology.out:
Copies of expected output for regression testing.
Note: Only horology.out has been physically tested. I do not have access
to a Solaris box and I don't know how to provoke the "pre-1970" test.
src/test/regress/sql/horology.sql:
Added some test cases to check extended range.
John Cochran
takes two parameters, an OID x and an integer y, and returns "true" with
probability 1/y (the OID argument is ignored). This can be useful -- for
example, it can be used to select a random sampling of the rows in a
table (which is what the "random" regression test uses it for).
This patch removes that function, because it was old and messy. The old
function had the following problems:
- it was undocumented
- it was poorly named
- it was designed to workaround an optimizer bug that no longer exists
(the OID argument is to ensure that the optimizer won't optimize away
calls to the function; AFAIK marking the function as 'volatile' suffices
nowadays)
- it used a different random-number generation technique than the other
PSRNG-related functions in the backend do (it called random() like they
do, but it had its own logic for setting a set and deciding when to
reseed the RNG).
Ok, this patch removes oidrand(), oidsrand(), and userfntest(), and
improves the SGML docs a little bit (un-commenting the setseed()
documentation).
Neil Conway
CHECK constraints.
There are apparently no other types of constraint in pg_constraint, so
now all bases are covered. Also, this patch assumes that consrc for a
CHECK constraint is always bracketed so that it's not necessary to add
extra brackets.
Christopher Kings-Lynne
rid of the assumption that sizeof(Oid)==sizeof(int). This is one small
step towards someday supporting 8-byte OIDs. For the moment, it doesn't
do much except get rid of a lot of unsightly casts.
expression accepted by the regex operators, per discussion yesterday.
Along the way, reduce deadlock_timeout from PGC_POSTMASTER to PGC_SIGHUP
category. It is probably best to insist that all backends share the same
setting, but that doesn't mean it has to be frozen at startup.
(extracted from Tcl 8.4.1 release, as Henry still hasn't got round to
making it a separate library). This solves a performance problem for
multibyte, as well as upgrading our regexp support to match recent Tcl
and nearly match recent Perl.
startup, not in the parser; this allows ALTER DOMAIN to work correctly
with domain constraint operations stored in rules. Rod Taylor;
code review by Tom Lane.
for type 'time without time zone', as we already did for type
'timestamp without time zone'. This patch was proposed by Tom Lockhart
on 7-Nov-02, but he never got around to applying it. Adjust regression
tests and documentation to match.
cannot actually happen at present because ArrayCount() is only called
on strings beginning with '{', but seems best to prevent it going forward.
Per report from Yichen Xie.
value of MAX_TIME_PRECISION in floating-point-timestamp-storage case
from 13 to 10, which is as much as time_out is actually willing to print.
(The alternative of increasing the number of digits we are willing to
print looks risky; we might find ourselves printing roundoff garbage.)
passed to join selectivity estimators. Make use of this in eqjoinsel
to derive non-bogus selectivity for IN clauses. Further tweaking of
cost estimation for IN.
initdb forced because of pg_proc.h changes.
Try to model the effect of rescanning input tuples in mergejoins;
account for JOIN_IN short-circuiting where appropriate. Also, recognize
that mergejoin and hashjoin clauses may now be more than single operator
calls, so we have to charge appropriate execution costs.
necessarily following the JOIN syntax to develop the query plan. The old
behavior is still available by setting GUC variable JOIN_COLLAPSE_LIMIT
to 1. Also create a GUC variable FROM_COLLAPSE_LIMIT to control the
similar decision about when to collapse sub-SELECT lists into their parent
lists. (This behavior existed already, but the limit was always
GEQO_THRESHOLD/2; now it's separately adjustable.)
of the socket file and socket lock file; this should prevent both of them
from being removed by even the stupidest varieties of /tmp-cleaning
script. Per suggestion from Giles Lean.
of known-equal expressions includes any constant expressions (including
Params from outer queries), we actively suppress any 'var = var'
clauses that are or could be deduced from the set, generating only the
deducible 'var = const' clauses instead. The idea here is to push down
the restrictions implied by the equality set to base relations whenever
possible. Once we have applied the 'var = const' clauses, the 'var = var'
clauses are redundant, and should be suppressed both to save work at
execution and to avoid double-counting restrictivity.
There are two implementation techniques: the executor understands a new
JOIN_IN jointype, which emits at most one matching row per left-hand row,
or the result of the IN's sub-select can be fed through a DISTINCT filter
and then joined as an ordinary relation.
Along the way, some minor code cleanup in the optimizer; notably, break
out most of the jointree-rearrangement preprocessing in planner.c and
put it in a new file prep/prepjointree.c.
datetime token tables. Even more embarrassing, the regression tests
revealed some of the problems --- but evidently the bogus output wasn't
questioned. Add code to postmaster startup to directly check the tables
for correct ordering, in hopes of not being embarrassed like this again.
containing a volatile function), rather than only on 'Var = Var' clauses
as before. This makes it practical to do flatten_join_alias_vars at the
start of planning, which in turn eliminates a bunch of klugery inside the
planner to deal with alias vars. As a free side effect, we now detect
implied equality of non-Var expressions; for example in
SELECT ... WHERE a.x = b.y and b.y = 42
we will deduce a.x = 42 and use that as a restriction qual on a. Also,
we can remove the restriction introduced 12/5/02 to prevent pullup of
subqueries whose targetlists contain sublinks.
Still TODO: make statistical estimation routines in selfuncs.c and costsize.c
smarter about expressions that are more complex than plain Vars. The need
for this is considerably greater now that we have to be able to estimate
the suitability of merge and hash join techniques on such expressions.
